Influence of Deposition Temperature on the Microstructures and Properties of Plasma-Sprayed Al2O3 Coatings
Source abstract
Abstract
Al2O3 coatings were deposited on 1Cr13 substrates by atmospheric plasma spraying at different deposition temperatures of 140, 275, 375, 480, 530, and 660 °C to investigate the effect of coating surface temperature on the lamellar bonding formation. The fractured cross section morphology was characterized by scanning electron microscopy to reveal the lamellar interface bonding. X-ray diffraction was used to characterize the phase contents in the coating. Micro-hardness, Young’s modulus, and thermal conductivity of the deposits were measured for examining the dependency of coating properties on its microstructure. The results show that the interface area bonded through columnar grain growth across splat-splat interfaces was increased with increasing deposition temperature. Moreover, micro-hardness, Young’s modulus and thermal conductivity were increased with the increase of deposition temperature. However, the phase structure of the coating changed little with deposition temperature. The results evidently indicate that the apparent bonding ratio and properties of deposits can be significantly changed in a wider range through controlling the deposition temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. P. Fauchais, A. Vardelle, and B. Dussoubs, Quo Vadis Thermal Spraying?, J. Thermal Spray Technol., 2001, 10(1), p 44-6610.1361/105996301770349510 ↗
2. E. Lugscheider, C. Barimani, P. Eckert, and U. Eritt, Modeling of the APS Plasma Spray Process, Comput. Mater. Sci., 1996, 7(1-3), p 109-11410.1016/S0927-0256(96)00068-7 ↗
3. B. Goswami, A.K. Ray, and S.K. Sahay, Thermal Barrier Coating System for Gas Turbine Application—A Review, High Temp. Mater. Process., 2004, 23(2), p 73-9210.1515/HTMP.2004.23.2.73 ↗
4. M. Mohanty and R.W. Smith, Lightweight TiC/Ti Wear-resistant Coatings for Lightweight Structural Applications, J. Thermal Spray Technol., 1995, 4(4), p 384-39410.1007/BF02648640 ↗
5. H. Singh, B.S. Sidhu, D. Puri, and S. Prakash, Use of Plasma Spray Technology for Deposition of High Temperature Oxidation Corrosion Resistant Coatings—A Review, Mater. Corros., 2007, 58(2), p 92-10210.1002/maco.200603985 ↗
6. P. Ctibor, J. Sedlacek, and K. Neufuss, Influence of Chemical Composition on Dielectric Properties of Al2O3 and ZrO2 Plasma Deposits, Ceram. Int., 2003, 29(5), p 527-53210.1016/S0272-8842(02)00197-9 ↗
7. A. Ohmori and C.-J. Li, Quantitative Characterization of the Structure of Plasma Sprayed Al2O3 Coating by Using Copper Electroplating, Thin Solid Films, 1991, 201(2), p 241-25210.1016/0040-6090(91)90114-D ↗
8. A. Ohmori, C.-J. Li, and Y. Arata, Structure of Plasma-sprayed Alumina Coatings Revealed by Using Copper Electroplating, Proceedings of the 4th National Thermal Spray Conference, Thermal Spray Coatings: Properties, Processes and Applications, T.F. Bernecki, Ed., May 4-10, 1991 (Pittsburgh, PA), ASM International, 1992, p 105-113
9. C.-J. Li and A. Ohmori, Relationships Between the Microstructure and Properties of Thermally Sprayed Deposits, J. Thermal Spray Technol., 2002, 11(3), p 365-37410.1361/105996302770348754 ↗
10. Z.J. Yin, S.Y. Tao, X.M. Zhou, and C.X. Ding, Evaluating Microhardness of Plasma Sprayed Al2O3 Coatings Using Vickers Indentation Technique, J. Phys. D Appl. Phys., 2007, 40(22), p 7090-709610.1088/0022-3727/40/22/034 ↗
11. R. McPherson and B.V. Shafer, Interlamellar Contact Within Plasma-sprayed Coatings, Thin Solid Films, 1982, 97(3), p 201-20410.1016/0040-6090(82)90453-9 ↗
12. S. Kuroda and T.W. Clyne, The Quenching Stress in Thermally Sprayed Coatings, Thin Solid Films, 1991, 200(1), p 49-6610.1016/0040-6090(91)90029-W ↗
13. C.-J. Li, A. Ohmori, and R. McPherson, The Relationship Between Microstructure and Young’s Modulus of Thermally Sprayed Ceramic Coatings, J. Mater. Sci., 1997, 32(4), p 997-100410.1023/A:1018574221589 ↗
14. C.-J. Li, W.-Z. Wang, and H. Yong, Dependency of Fracture Toughness of Plasma Sprayed Al2O3 Coatings on Lamellar Structure, J. Thermal Spray Technol., 2004, 13(3), p 425-43110.1361/10599630419364 ↗
15. R. McPherson, A Model for the Thermal Conductivity of Plasma-Sprayed Ceramic Coatings, Thin Solid Films, 1984, 112(1), p 89-9510.1016/0040-6090(84)90506-6 ↗
16. O. Sarikaya, Effect of the Substrate Temperature on Properties of Plasma Sprayed Al2O3 Coatings, Mater. Des., 2005, 26(1), p 53-5710.1016/j.matdes.2004.04.005 ↗
17. Y.-Z. Xing, C.-J. Li, C.-X. Li, and G.-J. Yang, Influence of Through-lamella Grain Growth on Ionic Conductivity of Plasma-sprayed Yttria-stabilized Zirconia as an Electrolyte in Solid Oxide Fuel Cells, J. Power Sour., 2008, 176(1), p 31-3810.1016/j.jpowsour.2007.10.031 ↗
18. A. Ohmori, C.J. Li, and Y. Arata, Influence of Plasma Spray Conditions on the Structure of Al2O3 Coatings, Trans. Jpn. Weld. Res. Inst., 1990, 19, p 259-270
19. Z.J. Yin, S.Y. Tao, X.M. Zhou, and C.X. Ding, Particle in-flight Behavior and Its Influence on the Microstructure and Mechanical Properties of Plasma-Sprayed Al2O3 Coatings, J. Eur. Ceram. Soc., 2008, 28(6), p 1143-114810.1016/j.jeurceramsoc.2007.09.050 ↗
20. J.R. Mawdsley, Y.J. Su, and K.T. Faber, Optimization of Small-particle Plasma-Sprayed Alumina Coatings Using Designed Experiments, Mater. Sci. Eng. A, 2001, 308(1-2), p 189-19910.1016/S0921-5093(00)01992-4 ↗
21. L. Bianchi, A.C. Leger, M. Vardelle, A. Vardell, and P. Fauchais, Splat Formation and Cooling of Plasma-Sprayed Zirconia, Thin Solid Films, 1997, 305(1), p 35-4710.1016/S0040-6090(97)80005-3 ↗
22. V. Pershin, M. Lufitha, S. Chandra, and J. Mostaghimi, Effect of Substrate Temperature on Adhesion Strength of Plasma-Sprayed Nickel Coatings, J. Thermal Spray Technol., 2003, 12(3), p 370-37610.1361/105996303770348249 ↗
23. P. Fauchais, M. Fukumoto, M. Vardelle, and A. Vardell, Knowledge Concerning Splat Formation: An Invited Review, J. Thermal Spray Technol., 2004, 13(3), p 337-36010.1361/10599630419670 ↗
24. G.N. Heintze and S. Uematsu, Preparation and Structures of Plasma-Sprayed γ- and α-Al2O3 Coatings, Surf. Coat. Technol., 1992, 50(3), p 213-22210.1016/0257-8972(92)90004-T ↗
25. I.H. Jung, K.K. Bae, M.S. Yang, and S.K. Ihm, A Study of the Microstructure of Yttria-Stabilized Zirconia Deposited by Inductively Coupled Plasma Spraying, J .Thermal Spray Technol., 2000, 9(4), p 463-47710.1007/BF02608548 ↗
26. H.B. Guo, R. Vassen, and D. Stöver, Atmospheric Plasma Sprayed Thick Thermal Barrier Coatings with High Segmentation Crack Density, Surf. Coat. Technol., 2004, 186(3), p 353-36310.1016/j.surfcoat.2004.01.002 ↗
27. H.B. Guo, S. Kuroda, and H. Murakami, Microstructures and Properties of Plasma-Spayed Segmented Thermal Barrier Coatings, J. Am. Ceram. Soc., 2006, 89(4), p 1432-143910.1111/j.1551-2916.2005.00912.x ↗
28. H.B. Guo, S. Kuroda, and H. Murakami, Segmented Thermal Barrier Coatings Produced by Atmospheric Plasma Spraying Hollow Powders, Thin Solid Films, 2006, 506-507, p 136-13910.1016/j.tsf.2005.08.142 ↗
29. A. Tricoire, M. Vardelle, P. Fauchais, F. Braillard, A. Malie, and P. Bengtsson, Macrocrack Formation in Plasma-Sprayed YSZ TBCs when Spraying Thick Passes, High Temp. Mater. Process., 2005, 9, p 401-41310.1615/HighTempMatProc.v9.i3.70 ↗
30. Y.-Z. Xing, Y. Li, C.-J. Li, C.-X. Li, and G.-J. Yang, Influence of Substrate Temperature on Microcracks Formation in Plasma-Sprayed Yttria-Stabilized Zirconia Splats, Key Eng. Mater., 2008, 373-374, p 69-7210.4028/www.scientific.net/KEM.373-374.69 ↗
31. S. Hillier, Accurate Quantitative Analysis of Clay and other Minerals in Sandstones by XRD: Comparison of a Rietveld and a Reference Intensity Ratio (RIR) Method and the Importance of Sample Preparation, Clay Miner., 2000, 35(1), p 291-30210.1180/000985500546666 ↗
32. Q. Johnson and R.S. Zhou, Checking and Estimating RIR Values, Adv. X-ray Anal., 2000, 42, p 287-296
33. D.B. Marshall, T. Noma, and A.G. Evans, A Simple Method for Determining Elastic-Modulus-to-Hardness Ratios Using Knoop Indentation Measurements, J. Am. Ceram. Soc., 1982, 65(10), p 175-17610.1111/j.1151-2916.1982.tb10357.x ↗
34. F. Kroupa and J. Dubsky, Pressure Dependence of Young’s Modulus of Thermal Sprayed Materials, Scr. Mater., 1999, 40(11), p 1249-125410.1016/S1359-6462(99)00120-7 ↗
35. Y.-Z. Xing, C.-J. Li, Q. Zhang, C.-X. Li, and G.-J. Yang, Influence of Microstructure on the Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia Deposits, J. Am. Ceram. Soc., 2008, 91(12), p 3931-393610.1111/j.1551-2916.2008.02775.x ↗
36. A. Vardelle, M. Vardelle, R. McPherson, and P. Fauchais, Study of the Influence of Particle Temperature and Velocity Distribution within a Plasma Jet Coating Formation, General Aspect of Thermal Spraying (Proceedings of 9th International Thermal Spray Conference), The Hague, 19-23 May 1980, pp 155-161
37. Y.-Z. Xing, C.-J. Li, J.-H. Qiao, and G.-X. Wang, Analysis on Rapid Cooling and Epitaxial Solidification of a Plasma-sprayed Yttria Stabilized Zirconia Splat on a High-temperature Substrate, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2008, Vol. 8, pts A and B, p 1837-184410.1115/IMECE2007-43266 ↗
38. M. Vardelle and J.L. Besson, γ-Alumina Obtained by Arc Plasma Spraying: A Study of the Optimization of Spraying Conditions, Ceram. Int., 1981, 7(2), p 48-5410.1016/0272-8842(81)90013-4 ↗
39. P. Chraska, J. Dubsky, and K. Neufuss, Alumina-Base Plasma-Sprayed Materials, Part I: Phase Stability of Alumina and Alumina-Chromia, J. Thermal Spray Technol., 1997, 6(3), p 320-32610.1007/s11666-997-0066-9 ↗
40. Y.Arata, A.Ohmori, and C.-J. Li, Fundamental Properties of the ACT-JP (Arata Coating Test with Jet Particles), Proceedings of the 1st National Thermal Spray Conference, Thermal Spray: Advances in Coatings Technology, D.L. Houck, Ed., Sept 14-17, 1987 (Orlando, FL), ASM International, 1988, p 79-83
41. R. Kawase, K.Tanaka, T. Hamamoto, and H. Haraguchi, Study on Elastic Constant and Residual Stress Measurements during Ceramic Coatings, Proceedings of the 3rd National Thermal Spray Conference, Thermal Spray Research and Applications, T.F. Bernecki, Ed., May 20-25, 1990 (Long Beach, CA), ASM International, 1991, p 339-342
42. K.S. Shi, Z.Y. Qian, and M.S. Zhang, Microstructure and Properties of Sprayed Ceramic Coating, J. Am. Ceram. Soc., 1988, 71(11), p 924-92910.1111/j.1151-2916.1988.tb07559.x ↗
43. R. Yamasaki and J. Takeuchi, Physical Characteristics of Alumina Coating Using Atmospheric Plasma Spraying(APS) and Low Pressure Plasma Spraying(VPS), Proceeding of the International Thermal Spray Conference, Thermal Spray 2004: Advances in Technology and Application, ASM International, May 10-12, 2004 (Osaka, Japan), ASM International, 2004, p 283-28910.31399/asm.cp.itsc2004p0283 ↗
44. J. Francel and W.D. Kingrey, Thermal Conductivity: IV, Apparatus for Determining Thermal Conductivity by a Comparative Method, J. Am. Ceram. Soc., 1954, 37(2), p 80-8110.1111/j.1551-2916.1954.tb20103.x ↗
45. L. Pawlowski and P. Fauchais, Thermal Transport Properties of Thermally Spayed Coatings, Int. Mater. Rev., 1992, 37, p 271-28910.1179/imr.1992.37.1.271 ↗
46. R. Dutton, R. Wheeler, K.S. Ravichandran, and K. An, Effect of Heat Treatment on the Thermal Conductivity of Plasma-Sprayed Thermal Barrier Coatings, J. Thermal Spray Technol., 2000, 9(2), p 204-20910.1361/105996300770349935 ↗