journal article·2007-12Open access

Numerical Study of Combination Parameters for Particle Impact Velocity and Temperature in Cold Spray

H. Katanoda, M. Fukuhara, N. Iino

Journal of Thermal Spray Technology· Volume 16· Issue 5-6

Abstract

Abstract Numerical simulations of gas/particle flows of cold spray are performed for N2 and He as a process gas respectively, to investigate the usefulness of the two material-independent combination parameters derived from the equations of particle motion and temperature. The first combination parameter is the particle-diameter multiplied by the material density, which governs the particle velocity. The second one is the squared particle-diameter multiplied by the material density and specific heat, which affects the particle temperature. In the numerical simulation, the materials of the spray particle selected are WC-12Co, Cu and Ti. The diameter of the particle is in the range of 0.1 – 30 µm. The present numerical results show that the maximum impact velocity of particle is obtained when the first combination parameter takes specific value regardless of the material type. Furthermore, it is shown that the particle diameter and its temperature corresponding to the maximum impact velocity can be graphically estimated by using the two combination parameters for any powder-materials normally used for the thermal spray.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Combustion and Detonation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. T. Stoltenhoff, H. Kreye, H.J. Richter, An Analysis of the Cold Spray Process and Its Coatings, J. Thermal Spray Technol., Vol 11 (No. 4), 2002, p 542-55010.1361/105996302770348682 ↗
2. T. Marrocco, D.G. McCartney, P.H. Shipway, A.J. Sturgeon, Production of Titanium Deposits by Cold-Gas Dynamic Spray: Numerical Modeling and Experimental Characterization, J. Thermal Spray Technol., Vol 15 (No. 2), 2006, p 263-27210.1361/105996306X108219 ↗
3. M. Karimi, A. Fartaj, G. Rankin, D. Vanderzwet, W. Birtch, J. Villafuerte, Numerical Simulation of the Cold Gas Dynamic Spray Process, J. Thermal Spray Technol., Vol 15 (No. 4), 2006, p 518-52310.1361/105996306X146866 ↗
4. W.-Y. Li, C.-J. Li, Optimal Design of a Novel Cold Spray Gun Nozzle at a Limited Space, J. Thermal Spray Technol., Vol 14 (No. 3), 2005, p 391-39610.1361/105996305X59404 ↗
5. R.C. Dykhuizen and R.A. Neiser, Optimizing the Cold Spray Process, Thermal Spray 2003: Advancing the Science and Applying the Technology, B.R. Marple and C. Moreau, Eds., May 5-8, 2003 (Orlando, FL, USA) ASM International, Materials Park, OH, 2003, p 19-2610.31399/asm.cp.itsc2003p0019 ↗
6. B. Jodoin, Cold Spray Nozzle Mach Number Limitation, J. Thermal Spray Technol., Vol 11 (No. 4), 2002, p 496-50710.1361/105996302770348628 ↗
7. H.C. Yee, Upwind and Symmetric Shock-Capturing Schemes, NASA TM-89464, 1987, 127 pp
8. M.J. Zucrow, J.D. Hoffman, Gas Dynamics, John Wiley & Sons, NY, (1976) p 160-181
9. H.D. Kim, K. Matsuo, T. Setoguchi, Investigation on Onset of Shock-Induced Separation, Shock Waves, Vol 6 (No. 5), 1996, p 275-28610.1007/BF02535741 ↗
10. A.B. Bailey, J. Hiatt, Sphere Drag Coefficient for a Broad Range of Mach and Reynolds Numbers, AIAA J., Vol 10 (No. 11), 1972, p 1436-144010.2514/3.50387 ↗
11. Y.P. Wan, V. Prasad, G.-X. Wang, S. Sampath, J.R. Fincke, Model and Powder Particle Heating, Melting, Resolidification, and Evaporation in Plasma Spraying Processes, J. Heat Transfer, Vol 121 (No. 3), 1999, p 691-69910.1115/1.2826034 ↗