journal article·2012-06Open access

Improving Atmospheric Plasma Spraying of Zirconate Thermal Barrier Coatings Based on Particle Diagnostics

Georg Mauer, Doris Sebold, Robert Vaßen, Detlev Stöver

Journal of Thermal Spray Technology· Volume 21· Issue 3-4

Abstract

Abstract Lanthanum zirconate (La2Zr2O7) was proposed as a promising material for thermal barrier coatings. At atmospheric plasma spraying (APS) of La2Zr2O7 a considerable amount of La2O3 can evaporate in the plasma flame, resulting in a non-stoichiometric coating. As indicated in the phase diagram of the La2O3-ZrO2 system, in the composition range of pyrochlore structure, the stoichiometric La2Zr2O7 has the highest melting point and other compositions are eutectic. APS experiments were performed with a TriplexPro-200 plasma torch at different power levels to achieve different degrees of evaporation and thus stoichiometry. For comparison, some investigations on Gd2Zr2O7 were included which is less prone to evaporation and formation of non-stoichiometry. Particle temperature distributions were measured by the DPV-2000 diagnostic system. In these distributions, characteristic peaks were detected at specific torch input powers indicating evaporation and solidification processes. Based on this, process parameters can be defined to provide stoichiometric coatings intended to show good thermal cycling performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear materials and radiation effects · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. A. Feuerstein, J. Knapp, T. Taylor, A. Ashary, A. Bolcavage, and N. Hitchman, Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A Review, J. Therm. Spray Tech., 2008, 17(2), p 199-21310.1007/s11666-007-9148-y ↗
2. R. Vaßen, H. Kaßner, A. Stuke, F. Hauler, D. Hathiramani, and D. Stöver, Advanced Thermal Spray Technologies for Applications in Energy Systems, Surf. Coat. Technol., 2008, 202, p 4432-443710.1016/j.surfcoat.2008.04.022 ↗
3. S. Stecura, Effects of Compositional Changes on the Performance of a Thermal Barrier Coating System, NASA TM-78976, National Aeronautics and Space Administration, 1978
4. R.A. Miller, J.L. Smialek, and R.G. Garlick, Phase Stability in Plasma-Sprayed, Partially Stabilized Zirconia-Yttria, Advances in Ceramics, Vol 3, Science and Technology of Zirconia, A.H. Heuer and L.W. Hobbs, Ed., The American Ceramic Society, Columbus, OH, 1981, p 241-253
5. D. Zhu and R.A. Miller, Thermal Conductivity and Elastic Modulus Evolution of Thermal Barrier Coatings Under High Heat Flux Conditions, J. Therm. Spray Tech., 2000, 9, p 175-18010.1361/105996300770349890 ↗
6. R. Vaßen, A. Stuke, and D. Stöver, Recent Developments in the Field of Thermal Barrier Coatings, J. Therm. Spray Tech., 2009, 18(2), p 181-18610.1007/s11666-009-9312-7 ↗
7. R. Vaßen, X.Q. Cao, F. Tietz, D. Basu, and D. Stöver, Zirconates as New Materials for Thermal Barrier Coatings, J. Am. Ceram. Soc., 2000, 83(8), p 2023-202810.1111/j.1151-2916.2000.tb01506.x ↗
8. D.R. Clarke and S.R. Phillpot, Thermal Barrier Coating Materials, Mater. Today, 2005, 8(6), p 22-2910.1016/S1369-7021(05)70934-2 ↗
9. R. Vaßen, M.O. Jarligo, T. Steinke, D.E. Mack, and D. Stöver, Overview on Advanced Thermal Barrier Coatings, Surf. Coat. Technol., 2010, 205, p 938-94210.1016/j.surfcoat.2010.08.151 ↗
10. X.Q. Cao, R. Vaßen, and D. Stöver, Ceramic Materials for Thermal Barrier Coatings, J. Eur. Ceram. Soc., 2004, 24, p 1-1010.1016/S0955-2219(03)00129-8 ↗
11. H. Lehmann, D. Pitzer, G. Pracht, R. Vaßen, and D. Stöver, Thermal Conductivity and Thermal Expansion Coefficients of the Lanthanum Rare-Earth-Element Zirconate System, J. Am. Ceram. Soc., 2003, 86(8), p 1338-134410.1111/j.1151-2916.2003.tb03473.x ↗
12. M.M. Gentleman and D.R. Clarke, Luminescence Sensing of Temperature in Pyrochlore Zirconate Materials for Thermal Barrier Coatings, Surf. Coat. Technol., 2005, 200, p 1264-126910.1016/j.surfcoat.2005.07.085 ↗
13. R. Vaßen, F. Traeger, and D. Stöver, New Thermal Barrier Coatings Based on Pyrochlore/YSZ Double-Layer Systems, Int. J. Appl. Ceram. Technol., 2004, 1(4), p 351-36110.1111/j.1744-7402.2004.tb00186.x ↗
14. X.Q. Cao, R. Vaßen, F. Tietz, and D. Stöver, New Double-Ceramic-Layer Thermal Barrier Coatings Based on Zirconia-Rare Earth Composite Oxides, J. Eur. Ceram. Soc., 2006, 26, p 247-25110.1016/j.jeurceramsoc.2004.11.007 ↗
15. H. Chen, Y. Liu, Y. Gao, S. Tao, and H. Luo, Design, Preparation, and Characterization of Graded YSZ/La2Zr2O7 Thermal Barrier Coatings, J. Am. Ceram. Soc., 2010, 93(6), p 1732-174010.1111/j.1551-2916.2010.03610.x ↗
16. X.Q. Cao, R. Vaßen, W. Jungen, S. Schwartz, F. Tietz, and D. Stöver, Thermal Stability of Lanthanum Zirconate Plasma-Sprayed Coating, J. Am. Ceram. Soc., 2001, 84(9), p 2086-209010.1111/j.1151-2916.2001.tb00962.x ↗
17. A. Rouanet, Contribution a l’étude des systèmes zircone-oxydes des lanthanides au voisinage de la fusion, Revue Internationale des Hautes Températures et des Réfractaires, 1971, 9(2), p 161/80. In: ACerS-NIST Phase Equilibria Diagrams, CD-ROM Database V. 3.1.0, American Ceramic Society, Westerville, OH, USA, 2005
18. A.V. Radha, S.V. Ushakov, and A. Navrotsky, Thermochemistry of Lanthanum Zirconate Pyrochlore, J. Mater. Res., 2009, 24(11), p 3350-335710.1557/jmr.2009.0401 ↗
19. R. Vaßen, Entwicklung neuer oxidischer Wärmedämmschichten für Anwendungen in stationären und Flug-Gasturbinen, Schriften des Forschungszentrums Jülich, Energy Technology, Vol 33, Forschungszentrum Jülich, 2004 (in German)
20. H. Chen, Y. Gaoa, Y. Liua, and H. Luo, Coprecipitation Synthesis and Thermal Conductivity of La2Zr2O7, J. Alloys Compd., 2009, 480, p 843-84810.1016/j.jallcom.2009.02.081 ↗
21. H. Chen, Y. Gao, S. Tao, Y. Liu, and H. Luo, Thermophysical Properties of Lanthanum Zirconate Coating Prepared by Plasma Spraying and the Influence of Post Annealing, J. Alloys Compd., 2009, 486, p 391-39910.1016/j.jallcom.2009.06.162 ↗
22. Z. Xu, L. He, R. Mu, S. He, and X. Cao, Preparation and Characterization of La2Zr2O7 Coating with the Addition of Y2O3 by EB-PVD, J. Alloys Compd., 2010, 492, p 701-70510.1016/j.jallcom.2009.12.022 ↗
23. J.L. Margrave, Ed., The Characterization of High Temperature Vapors, Wiley, New York, NY, 1967
24. R.J. Meyer, E.H.E. Pietsch, A. Kotowski, M. Becke-Goehring, and K.-C. Buschbeck, Gmelin Handbuch der Anorganischen Chemie, 8th ed., Springer-Verlag, Berlin, 1974 (in German)
25. W. Goldstein, P.N. Walsh, and D. White, Rare Earths. I. Vaporization of La2O3 and Nd2O3: Dissociation Energies of Gaseous LaO and NdO, J. Phys. Chem., 1960, 65, p 1400-140410.1021/j100826a029 ↗
26. G. Mauer, R. Vaßen, and D. Stöver, Comparison and Applications of DPV-2000 and Accuraspray-g3 Diagnostic Systems, J. Therm. Spray Tech., 2007, 16, p 414-42410.1007/s11666-007-9047-2 ↗
27. H.M. Rietveld, A Profile Refinement Method for Nuclear and Magnetic Structures, J. Appl. Crystallogr., 1969, 2, p 65-7110.1107/S0021889869006558 ↗
28. L. Vegard, Die Konstitution der Mischkristalle und die Raumfüllung der Atome, Z. Phys., 1921, 5(1), p 17-26 (in German)10.1007/BF01349680 ↗