Numerical Analysis of Cold Spray Particles Impacting Behavior by the Eulerian Method: A Review
Source abstract
Abstract
Numerical simulations have been widely used to study particles impacting behavior in cold spraying. Among the used simulation methods, the Eulerian frame becomes increasingly attractive for its absence of mesh distortion which happens in the Lagrangian frame. It has been proved that particle deformation behaviors upon impacting calculated by the Eulerian method are well comparable to the experimental observations. In this review article, the literature on modeling particle impacting by the Eulerian method was summarized. In the second part, the Eulerian method was detailedly introduced. In the third part, the particle/substrate impacting behavior, and its influencing factors, i.e., mesh resolution, particle impacting velocity, preheating (particle or/and substrate) and oxide film, were summarized. Additionally, the prediction of critical velocity and residual stresses by using the Eulerian method was also discussed in detail. Finally, the current issues, problems and prospects existing in the Eulerian simulations of particle impacting were explored.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. A. Papyrin, Cold Spray Technology, Adv. Mater. Proc., 2001, 9(159), p 35-51
2. A.P. Alkhimov, V.F. Kosarev, and A.N. Papyrin, A Method of Cold Gas Dynamic Deposition, DoldAkadNauk SSSR, 1990, 315(5), p 1062-1065
3. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51, p 4379-439410.1016/S1359-6454(03)00274-X ↗
4. R. Ghelichi, D. MacDonald, S. Bagherifard, H. Jahed, M. Guagliano, and B. Jodoin, Microstructure and Fatigue Behavior of Cold Spray Coated Al5052, Acta Mater., 2012, 60(19), p 6555-656110.1016/j.actamat.2012.08.020 ↗
5. W.Y. Li, D.D. Zhang, C.J. Huang, S. Yin, M. Yu, F.F. Wang, and H.L. Liao, Modeling of Impact Behaviour of Cold Spray Particles: Review, Surf. Eng., 2014, 30(5), p 299-30810.1179/1743294414Y.0000000268 ↗
6. X.M. Meng, J.B. Zhang, J. Zhao, Y.L. Liang, and Y.J. Zhang, Influence of Gas Temperature on Microstructure and Properties of Cold Spray 304SS Coating, J. Mater. Sci. Technol., 2011, 27(9), p 809-81510.1016/S1005-0302(11)60147-3 ↗
7. Z. Arabgol, H. Assadi, T. Schmidt, F. Gartner, and T. Klassen, Analysis of Thermal History and Residual Stress in Cold-Sprayed coatings, J. Therm. Spray Technol., 2013, 23(1–2), p 84-90
8. T. Stoltenhoff, C. Borchers, F. Gartner, and H. Kreye, Microstructures and Key Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200(16–17), p 4947-496010.1016/j.surfcoat.2005.05.011 ↗
9. C.J. Li and W.Y. Li, Deposition Characteristics of Titanium Coating in Cold Spraying, Surf. Coat. Technol., 2003, 167(2–3), p 278-283
10. X.K. Wu, X.L. Zhou, H. Cui, X. Zheng, and J.S. Zhang, Deposition Behavior and Characteristics of Cold-Sprayed Cu–Cr Composite Deposits, J. Therm. Spray Technol., 2012, 21(5), p 792-79910.1007/s11666-012-9755-0 ↗
11. K. Spencer, D.M. Fabijanic, and M.X. Zhang, The Use of Al-Al2O3 Cold Spray Coatings to Improve the Surface Properties of Magnesium Alloys, Surf. Coat. Technol., 2009, 204(3), p 336-34410.1016/j.surfcoat.2009.07.032 ↗
12. S.V. Klinkov, V.F. Kosarev, A.A. Sova, and I. Smurov, Calculation of Particle Parameters for Cold Spraying of Metal-Ceramic Mixtures, J. Therm. Spray Technol., 2009, 18(5–6), p 944-95610.1007/s11666-009-9346-x ↗
13. H.Y. Bu, M. Yandouzi, C. Lu, D. MacDonald, and B. Jodoin, Cold Spray Blended Al + Mg17Al12 Coating for Corrosion Protection of AZ91D Magnesium Alloy, Surf. Coat. Technol., 2012, 207, p 155-16210.1016/j.surfcoat.2012.06.050 ↗
14. S. Dosta, M. Couto, and J.M. Guilemany, Cold Spray Deposition of a WC-25Co Cermet onto Al7075-T6 and Carbon Steel Substrates, Acta Mater., 2013, 61(2), p 643-65210.1016/j.actamat.2012.10.011 ↗
15. S. Cho, K. Takagi, H. Kwon, D. Seo, K. Ogawa, K. Kikuchi, and A. Kawasaki, Multi-Walled Carbon Nanotube-Reinforced Copper Nanocomposite Coating Fabricated by Low-Pressure Cold Spray Process, Surf. Coat. Technol., 2012, 206(16), p 3488-349410.1016/j.surfcoat.2012.02.021 ↗
16. H. Lee and K. Ko, Effect of SiC Particle Size on Cold Sprayed Al-SiC Composite Coatings, Surf. Eng., 2009, 25(8), p 606-61110.1179/174329408X271516 ↗
17. J. Villafuerte, Recent Trends in Cold Spray Technology: Looking at the Future, Surf. Eng., 2010, 26(6), p 393-39410.1179/026708410X12687356948715 ↗
18. G. Bae, J. Jang, and C. Lee, Correlation of Particle Impact Conditions with Bonding, Nanocrystal Formation and Mechanical Properties in Kinetic Sprayed Nickel, Acta Mater., 2012, 60(8), p 3524-353510.1016/j.actamat.2012.03.001 ↗
19. M. Grujicic, J.R. Saylor, D.E. Beasley, W.S. DeRosset, and D. Helfritch, Computational Analysis of the Interfacial Bonding Between Feed-Powder Particles and the Substrate in the Cold-Gas Dynamic-Spray Process, Appl. Surf. Sci., 2003, 219(3), p 211-22710.1016/S0169-4332(03)00643-3 ↗
20. G. Bae, Y. Xiong, S. Kumar, K. Kang, and C. Lee, General Aspects of Interface Bonding in Kinetic Sprayed Coatings, Acta Mater., 2008, 56(17), p 4858-486810.1016/j.actamat.2008.06.003 ↗
21. R. Ghelichi, S. Bagherifard, M. Guagliano, and M. Verani, Numerical Simulation of Cold Spray Coating, Surf. Coat. Technol., 2011, 205, p 5294-530110.1016/j.surfcoat.2011.05.038 ↗
22. A. Moridi, S.M. Hassani-Gangaraj, and M. Gualiano, A Hybrid Approach to Determine Critical and Erosion Velocities in the Cold Spray Process, Appl. Surf. Sci., 2013, 273, p 617-62410.1016/j.apsusc.2013.02.089 ↗
23. M. Yu, W.Y. Li, F.F. Wang, and H.L. Liao, Finite Element Simulation of Impacting Behavior of Particles in Cold Spraying by Eulerian Approach, J. Therm. Spray Technol., 2012, 21(3–4), p 745-75210.1007/s11666-011-9717-y ↗
24. S. Yin, X. Wang, X. Suo, H. Liao, Z. Guo, W.L. Li, and C. Coddet, Deposition Behavior of Thermally Softened Copper Particles in Cold Spraying, Acta Mater., 2013, 61(14), p 5105-511810.1016/j.actamat.2013.04.041 ↗
25. K.H. Kim, W.Y. Li, and X.P. Guo, Detection of Oxygen at the Interface and Its Effect on Strain, Stress, and Temperature at the Interface Between Cold Sprayed Aluminum and Steel Substrate, Appl. Surf. Sci., 2015, 357, p 1720-172610.1016/j.apsusc.2015.10.022 ↗
26. M. Grujicic, C.L. Zhao, W.S. DeRosset, and D. Helfritch, Adiabatic Shear Instability Based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process, Mater. Design., 2004, 25(8), p 681-68810.1016/j.matdes.2004.03.008 ↗
27. W.Y. Li and W. Gao, Some Aspects on 3D Numerical Modeling of High Velocity Impact of Particles in Cold Spraying by Explicit Finite Element Analysis, Appl. Surf. Sci., 2009, 55(18), p 7878-789210.1016/j.apsusc.2009.04.135 ↗
28. R.C. Dykhuizen, M.F. Smith, D.L. Gilmore, R.A. Neiser, X. Jiang, and S. Sampath, Impact of High Velocity Cold Spray Particles, J. Therm. Spray Technol., 1999, 8(4), p 559-56410.1361/105996399770350250 ↗
29. G. Bae, S. Kumar, S. Yoon, K. Kang, H. Na, H.J. Kim, and C.H. Lee, Bonding Features and Associated Mechanisms in Kinetic Sprayed Titanium Coatings, Acta Mater., 2009, 57(19), p 5654-566610.1016/j.actamat.2009.07.061 ↗
30. P.C. King, G. Bae, S.H. Zahiri, M. Jahedi, and C. Lee, An Experimental and Finite Element Study of Cold Spray Copper Impact onto Two Aluminum Substrates, J. Therm. Spray Technol., 2009, 19(3), p 620-63410.1007/s11666-009-9454-7 ↗
31. K.H. Kim, M. Watanabe, and S. Kuroda, Bonding Mechanisms of Thermally Softened Metallic Powder Particles and Substrates Impacted at High Velocity, Surf. Coat. Technol., 2010, 204(14), p 2175-218010.1016/j.surfcoat.2009.12.001 ↗
32. W.Y. Li, H.L. Liao, C.J. Li, G. Li, C. Coddet, and X.F. Wang, On high Velocity Impact of Micro-Sized Metallic Particles in Cold Spraying, Appl. Surf. Sci., 2006, 253(5), p 2852-286210.1016/j.apsusc.2006.05.126 ↗
33. W.Y. Li, C. Zhang, C.J. Li, and H.L. Liao, Modeling Aspects of High Velocity Impact of Particles in Cold Spraying by Explicit Finite Element Analysis, J. Therm. Spray Technol., 2009, 18(5–6), p 921-93310.1007/s11666-009-9325-2 ↗
34. S. Yin, X.F. Wang, B.P. Xu, and W.Y. Li, Examination on the Calculation Method for Modeling the Multi-Particle Impact Process in Cold Spraying, J. Therm. Spray Technol., 2010, 5(19), p 1032-104110.1007/s11666-010-9489-9 ↗
35. W.Y. Li, S. Yin, and X.F. Wang, Numerical Investigations of the Effect of Oblique Impact on Particle Deformation in Cold Spraying by the SPH Method, Appl. Surf. Sci., 2010, 256(12), p 3725-373410.1016/j.apsusc.2010.01.014 ↗
36. A. Manap, O. Nooririnah, H. Misran, T. Okabe, and K. Ogawa, Experimental and SPH Study of Cold Spray Impact Between Similar and Dissimilar Metals, Surf. Eng., 2014, 30(5), p 335-34110.1179/1743294413Y.0000000237 ↗
37. W.Y. Li, M. Yu, H. Wu, and H.L. Liao, Effect of Mesh Resolution on the Particle Deformation During Cold Spraying by Eulerian Formulation, Rare. Metal Mater. Eng., 2012, 41(S1), p 327-330
38. F.F. Wang, W.Y. Li, M. Yu, and H.L. Liao, Prediction of Critical Velocity During Cold Spraying Based on a Coupled Thermo-Mechanical Eulerian Model, J. Therm. Spray Technol., 2014, 23(1–2), p 60-6710.1007/s11666-013-0009-6 ↗
39. M. Yu, W.Y. Li, F.F. Wang, X.K. Suo, and H.L. Liao, Effect of Particle and Substrate Preheating on Particle Deformation Behavior in Cold Spraying, Surf. Coat. Technol., 2013, 220, p 174-17810.1016/j.surfcoat.2012.04.081 ↗
40. W.Y. Li, K. Yang, D.D. Zhang, X.L. Zhou, and X.P. Guo, Interface Behavior of Particles Upon Impacting During Cold Spraying of Cu/Ni/Al Mixture, Mater. Design., 2016, 95, p 237-24610.1016/j.matdes.2016.01.122 ↗
41. W.Y. Li, K. Yang, D.D. Zhang, and X.L. Zhou, Residual Stress Analysis of Cold-Sprayed Copper Coatings by Numerical Simulation, J. Therm. Spray Technol., 2016, 25(1), p 131-14210.1007/s11666-015-0308-1 ↗
42. S. Yin, X.F. Wang, W.Y. Li, H.L. Liao, and H.E. Jie, Deformation Behavior of the Oxide Film on the Surface of Cold Sprayed Powder Particle, Appl. Surf. Sci., 2012, 259, p 294-30010.1016/j.apsusc.2012.07.036 ↗
43. Abaqus Analysis User’s Manual, ABAQUS 6.13 HTML Documentation, DassaultSystèmes, 2013.
44. C.J. Li, W.Y. Li, and H. Liao, Examination of the Critical Velocity for Deposition of Particles in Cold Spraying, J. Therm. Spray Technol., 2006, 15, p 212-22210.1361/105996306X108093 ↗
45. G.R. Johnson and W.H. Cook, Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures, Eng. Fract. Mech., 1985, 21(1), p 31-4810.1016/0013-7944(85)90052-9 ↗
46. X.W. Yang, W.Y. Li, J. Ma, S.T. Hu, Y. He, L. Li, and B. Xiao, Thermo-Physical Simulation of the Compression Testing For Constitutive Modeling of GH4169 Superalloy During Linear Friction Welding, J. Alloys Compd., 2016, 656, p 395-40710.1016/j.jallcom.2015.09.267 ↗
47. W.Y. Li, H.L. Liao, C.J. Li, H.S. Bang, and C. Coddet, Numerical Simulation of Deformation Behavior of Al Particles Impacting on Al Substrate and Effect of Surface Oxide Films on Interfacial Bonding in Cold Spraying, Appl. Surf. Sci., 2007, 253(11), p 5084-509110.1016/j.apsusc.2006.11.020 ↗
48. J.O. Hallquist, LS-DYNA Keyword User’s Manual, Ver 970, Livermore Software Technology Corporation, Livermore, 2003
49. G.R. Johnson and T.J. Holmquist, High Pressure Science and Technology 1993, S.C. Schmidt, J.W. Shaner, G.A. Samara, and M. Ross, Ed., AIP Press, New York, 1994, p 981-984
50. A. Tasdemirci and I.W. Hall, Numerical and Experimental Studies of Damage Generation in Multi-Layer Composite Materials at High Strain Rates, Int. J. Impact Eng., 2007, 34(2), p 189-20410.1016/j.ijimpeng.2005.08.010 ↗
51. D.J. Benson and S. Okazawa, Contact in a Multi-Material Eulerian Finite Formation, Comput. Methods Appl. Mech. Eng., 2004, 193(39–41), p 4277-429810.1016/j.cma.2003.12.061 ↗
52. J. Vlcek, L. Gimeno, H. Huber, and E. Lugscheider, A Systematic Approach to Material Eligibility for the Cold Spray Processes, Mater. Lett., 2004, 58, p 37-44
53. W.Y. Li, M. Yu, F.F. Wang, S. Yin, and H.L. Liao, A Generalized Critical Velocity Window Based on Material Property for Cold Spraying by Eulerian Method, J. Therm. Spray Technol., 2013, 23(3), p 557-56610.1007/s11666-013-0023-8 ↗
54. M. Fukumoto, K. Wada, K. Tanae, M. Yamada, E. Yamaguchi, A. Niwa, M. Sugimoto, and M. Izawa, Effect of Substrate Temperature on Deposition Behavior of Copper Particles on Substrate Surfaces in the Cold Spray Process, J. Therm. Spray Technol., 2007, 16(5), p 643-65010.1007/s11666-007-9121-9 ↗
55. M. Fukumoto, M. Mashiko, M. Yamada, and E. Yamaguchi, Deposition Behavior of Copper Fine Particles onto Flat Substrate Surface in Cold Spraying, J. Therm. Spray Technol., 2007, 19(1), p 89-94
56. C.J. Li, H.T. Wang, Q. Zhang, G.J. Yang, W.Y. Li, and H.L. Liao, Influence of Spray Materials and Their Surface Oxidation on the Critical Velocity in Cold Spraying, J. Therm. Spray Technol., 2010, 19(1–2), p 95-101
57. K. Kang, S. Yoon, Y. Ji, and C. Lee, Oxidation Dependency of Critical Velocity for Aluminum Feedstock Deposition in Kinetic Spraying Process, Mater. Sci. Eng., A, 2008, 486(1–2), p 300-30710.1016/j.msea.2007.09.010 ↗
58. T. Schmidt, F. Gartner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 3(54), p 729-74210.1016/j.actamat.2005.10.005 ↗
59. J. Vlcek, H. Huber, H. Voggenreiter, A. Fischer, E. Lugscheider, H. Hallen, and G. Pache, Kinetic Power Compaction Applying the Cold Spray Process Parameters, Thermal Spray 2001: New Surfaces for A New Millennium, C.C. Berndt, K.A. Khor, and E. Lugscheider, Ed., ASM International, Materials Park, 2001, p 417-422
60. L.L. Wang, Advances in Impact Dynamics, China Science and Technology University Press, Beijing, 1992
61. V. Luzin, K. Spencer, and M.X. Zhang, Residual Stress and Thermo-Mechanical Properties of Cold Spray Metal Coatings, Acta Mater., 2011, 59(3), p 1259-127010.1016/j.actamat.2010.10.058 ↗
62. R. Ghelichi, S. Bagherifard, D. MacDonald, and I. Fernandez-Pariente, Experimental and Numerical Study Residual Stress Evolution in Cold Spray Coating, Appl. Surf. Sci., 2014, 288(1), p 26-3310.1016/j.apsusc.2013.09.074 ↗
63. T. Suhonen, T. Varis, S. Dosta, M. Torrell, and J.M. Guilemany, Residual Stress Development in Cold Sprayed Al, Cu and Ti Coatings, Acta Mater., 2013, 61(17), p 6329-633710.1016/j.actamat.2013.06.033 ↗
64. A.S.M. Ang and C.C. Berndt, A Review of Testing Methods for Thermal Spray Coatings, Int. Mater. Rev., 2014, 59(4), p 179-22310.1179/1743280414Y.0000000029 ↗
65. J. Matejicek and S. Sampath, Intrinsic Residual Stresses in Single Splat Produced by Thermal Spray Processes, Acta Mater., 2001, 49(11), p 1993-199910.1016/S1359-6454(01)00099-4 ↗