Wear and Friction Behavior of NiCrBSi Coatings at Elevated Temperatures
Source abstract
Abstract
In many hot forming operations, the dies are subjected to high temperatures and high contact pressures. To combat wear problem, it is essential to select the accurate die material, hardness and surface coating for increasing the die life. This paper is an investigation into the use of NiCrBSi coating as a wear-resistant material on the H11 tool steel. The coating was developed by high-velocity oxy-fuel spray and atmospheric plasma spray process. In-depth characterization of the as-sprayed specimens was done by field emission-scanning electron microscopy/energy-dispersive spectroscopy and x-ray diffraction techniques. The mechanical and physical properties of the as-sprayed coatings were measured. Thereafter, the tribological performances of the uncoated and coated specimens were studied on high-temperature pin-on-disk tribometer under two different loads and temperatures ranging from room temperature to 800 °C. Wear mechanisms were mainly oxidative and adhesive at 400 °C and a combination of oxidative wear, abrasive wear and adhesive wear at 800 °C for the HVOF-sprayed and the APS-coated specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. J. Sjostrom, Chromium Martensitic Hot-Work Tool Steels-Damage, Performance and Microstructure, vol. 52. Dissertation Karlstad University Studies (2004).
2. J. Hardell and B. Prakash, Tribological Performance of Surface Engineered Tool Steel at Elevated Temperatures, Int. J. Refrac Metals Hard Mater., 2010, 28, p 106-11410.1016/j.ijrmhm.2009.07.009 ↗
3. G. Roberts, G. Krauss, and R. Kennedy, Tool Steels, 5th ed., ASM International, Novelty, 199810.31399/asm.tb.ts5.9781627083584 ↗
4. O.E. Okorafor, Fracture Toughness of M2 and H13 Alloy Tool Steels, Mater. Sci. Technol., 1987, 3, p 118-12410.1179/mst.1987.3.2.118 ↗
5. S. Kheirandish and A. Noorian, Effect of Niobium on Microstructure of Cast AISI, H13 Hot Work Tool Steel, J. Iron Steel Res. Inter., 2008, 15(4), p 61-6610.1016/S1006-706X(08)60145-4 ↗
6. L. Eliasson and O. Sandberg, New Materials and Processes for Tooling, Verlag Schurmann & Klagges KG, Bochum, 1989, p 3-14
7. P. Visuttipitukul, C. Paarai, and H. Kuwahara, Characterization of Atmospheric plasma Nitrided AISI, H13 Tool Steel, Acta Metall. Slovaca., 2006, 12, p 264-274
8. R. Kumar, R. Prakash, and J. Alphonsa, Impact of Forging Conditions on Atmospheric Plasma Nitrided Hot-Forging Dies and Punches, J. Mater. Sci. Res., 2012, 1(4), p 11-18
9. S. Lebaili and S. Hamar-thibault, Equilibresliquide-Solidedans le Systeme Ni-B-Si Dans La Region Riche En Nickel, Acta Metall., 1987, 35(3), p 701-710 (in French)10.1016/0001-6160(87)90194-5 ↗
10. M. Rosso, A. Bennani, Studies of New Applications of Ni-Based Powders for Hardfacing Processes, PM World Congress Thermal Spraying/Spray Forming, p. 524-530 (1998).
11. F. Otsubo, H. Era, and K. Kishitake, Structure and Phases in Nickel-Base Self-Fluxing Alloy Coating Containing High Cromium and Boron, J. Therm. Spray Technol., 2000, 9(1), p 107-11310.1361/105996300770350131 ↗
12. J.M. Miguel, J.M. Guilemany, and S. Vizcaino, Tribological Study of NiCrBSi Coating Obtained by Different Processes, Tribol. Int., 2003, 36, p 181-18710.1016/S0301-679X(02)00144-5 ↗
13. M.A. Garrido, A. Rico, M.T. Gomez, M. Cadenas, J.E. Fernandez-Rico, and J. Rodrıguez, Tribological and Oxidative Behavior of Thermally Sprayed NiCrBSi Coatings, J. Therm. Spray Technol., 2017, 26(3), p 517-52910.1007/s11666-016-0521-6 ↗
14. N. Serres, F. Hlawka, S. Costil, C. Langlade, and F. Machi, Microstructures of Metallic NiCrBSi Coatings Manufactured via Hybrid Atmospheric Plasma Spray and In Situ Laser Remelting, Process Journal of Thermal Spray Technology, 2011, 20(1-2), p 336-34310.1007/s11666-010-9565-1 ↗
15. I.C. Grigorescu, C. Di Rauso, R. Drira-Halouani, B. Lavelle, and J. Lira, Phase Characterization in Ni Alloy-Hard Carbide Composites for Fused Coatings, Surf. Coat. Technol., 1995, 76, p 494-49810.1016/0257-8972(95)02511-1 ↗
16. J. Rodriguez, A. Martin, R. Fernández, and J.E. Fernández, An Experimental Study of the Wear Performance of Nicrbsi Thermal Spray Coatings, Wear, 2003, 255(7-12), p 950-95510.1016/S0043-1648(03)00162-5 ↗
17. N. Serres, F. Hlawka, S. Costil, C. Langlade, and F. Machi, An Investigation of the Mechanical Properties and Wear Resistance of Nicrbsi Coatings Carried Out by In Situ Laser Remelting, Wear, 2011, 270(9-10), p 640-64910.1016/j.wear.2011.01.025 ↗
18. C. Guo, J. Zhou, J. Chen, J. Zhao, and H. Zhou, High Temperature Wear Resistance of Laser Cladding NiCrBSi and NiCrBSi/WC-Ni Composite Coatings, Wear, 2011, 270(7-8), p 492-49810.1016/j.wear.2011.01.003 ↗
19. A. Zikin, M. Antonov, I. Hussainova, L. Katona, and A. Gavrilovic, High Temperature Wear of Cermet Particle Reinforced NiCrBSi Hardfacings, Tribol. Int., 2013, 68, p 45-5510.1016/j.triboint.2012.08.013 ↗
20. M.T. Blatchford, M. Jones, A.J. Horlock, D.G. McCartney, P.H. Shipway, J.V. Wood, Improvements in HVOF Sprayed Cermet Coatings Produced from SHS Powders, in Proceedings of the International Thermal Spray Conference (2001), pp. 221-230.
21. J.R. Davis, Handbook of Thermal Spray Technology, ASM International, Ohio, 2004
22. N.L. Parthasarathi, M. Duraiselvam, and U. Borah, Effect of Atmospheric Plasma Spraying Parameter on Wear Resistance of NiCrBSiCFe Atmospheric Plasma Coatings on Austenitic Stainless Steel at Elevated Temperatures At Various Loads, Mater. Design, 2012, 36, p 141-15110.1016/j.matdes.2011.10.051 ↗
23. S. Natarajan, E.E. Anand, K.S. Akhilesh, A. Rajagopal, and P.P. Nambiar, Effect of Graphite Addition on the Microstructure, Hardness and Abrasive Wear Behavior of Atmospheric Plasma Sprayed NiCrBSi Coatings, Mater. Chem. Phys., 2016, 175, p 100-10610.1016/j.matchemphys.2016.02.076 ↗
24. M.P. Planche, H. Liao, B. Normand, and C. Coddet, Relationships Between NiCrBSi Particle Characteristics and Corresponding Coating Properties Using Different Thermal Spraying Processes, Surf. Coat. Technol., 2005, 200, p 2465-247310.1016/j.surfcoat.2004.08.224 ↗
25. D. Kong and B. Zhao, Effects of Loads on Friction and Wear Properties of HVOF Sprayed NiCrBSi Alloy Coatings by Laser Remelting, J. Alloys Compd., 2017, 705, p 700-70710.1016/j.jallcom.2017.02.171 ↗
26. S. Houdkova, E. Smazalova, M. Vostrak, and J. Schubert, Properties of NiCrBSi Coating, as Sprayed and Remelted by Different Technologies, Surf. Coat. Technol., 2014, 253, p 14-2610.1016/j.surfcoat.2014.05.009 ↗
27. C.J. Li and Y.Y. Wang, Effect of Particle State on the Adhesive Strength of HVOF Sprayed Metallic Coating, J. Therm. Spray Technol., 2002, 11(4), p 523-52910.1361/105996302770348655 ↗
28. L. Liu, H. Xu, J. Xiao, X. Wei, G. Zhang, and C. Zhang, Effect of Heat Treatment on Structure and Property Evolutions of Atmospheric Plasma Sprayed NiCrBSi Coatings, Surf. Coat. Technol., 2017, 325, p 548-55410.1016/j.surfcoat.2017.07.011 ↗
29. A.C. Karaoglanli, M. Oge, K.M. Doleker, and M. Hotamis, Comparison of Tribological Properties of HVOF Sprayed Coatings with Different Composition, Surf. Coat. Technol., 2017, 318, p 299-30810.1016/j.surfcoat.2017.02.021 ↗
30. W. Tillmann, L. Hagen, D. Stangier, I. Laemmerhirt, D. Biermann, P. Kersting, and E. Krebs, Wear Behavior of Bio-Inspired and Technologically Structured HVOF Sprayed NiCrBSiFe Coatings, Surf. Coat. Technol., 2015, 280, p 16-2610.1016/j.surfcoat.2015.08.055 ↗
31. S. Dong, B. Song, H. Liao, and C. Coddet, Deposition of NiCrBSi Coatings by Atmospheric Plasma Spraying and Dry-Ice Blasting: Microstructure and Wear Resistance, Surf. Coat. Technol., 2015, 268, p 36-4510.1016/j.surfcoat.2014.09.025 ↗
32. C. Huang, L. Du, W. Zhang, Microstructure and Tribological Properties of Atmospheric Plasma Sprayed NiCr/Cr3C2 and NiCr/Cr3C2-BaF2·CaF2 Composite Coatings, in Proceedings of CIST2008 & ITS-IFToMM, Beijing, China (2008).10.1007/978-3-642-03653-8_218 ↗
33. T.B. Torgerson, M.D. Harris, S.A. Alidokht, T.W. Scharf, S.M. Aouadi, R.R. Chromik, J.S. Zabinski, A.A. Voevodin, Room and Elevated Temperature Sliding Wear Behavior of Cold Sprayed Ni-WC Composite Coatings (2018). https://doi.org/10.1016/j.surfcoat.2018.05.090 .10.1016/j.surfcoat.2018.05.090 ↗
34. F.H. Stott, D.S. Lin, and G.C. Wood, The Structure and Mechanism of Formation of the ‘Glaze’ Oxide Layers Produced on Nickel-Based Alloys During Wear at High Temperatures, Corros. Sci., 1973, 13, p 449-46910.1016/0010-938X(73)90030-9 ↗
35. H. Kashani, A. Amadeh, and H.M. Ghasemi, Room and High Temperature Wear Behaviors of Nickel and Cobalt Base Weld Overlay Coatings on Hot Forging Dies, Wear, 2007, 262, p 800-80610.1016/j.wear.2006.08.028 ↗
36. G. Bolelli, T. Borner, A. Milanti, L. Lusvarghi, J. Laurila, H. Koivuluoto, K. Niemi, and P. Vuoristo, Tribological Behavior of HVOF and HVAF Sprayed Composite Coating Based on Fe-Alloy + WC-12% Co, Surf. Coat. Technol., 2014, 248, p 104-11210.1016/j.surfcoat.2014.03.037 ↗
37. J. Hardell, Tribology of Hot Forming Tools and High Strength Steels. Doctoral Thesis, Lulea University of Technology, Department of Applied Physics and Mechanical Engineering, Lulea (2009)
38. L. Hauschmann, J. Siegi, J. Karlik, I.P. Kunes, Atmospheric plasma Sprayed Coatings Under Cyclic Contact Pressure on a Small Area, in 13th International Thermal Spray Conference (ITSC) ASM International, Orlando, FL, USA, pp. 723-727 (1992).
39. R. Nieminen, P. Vuoristo, K. Niemi, T. Mantyla, and G. Barbezat, Rolling Contact Fatigue Failure Mechanisms in Atmospheric Plasma and HVOF Sprayed WC-Co Coatings, Wear, 1997, 212, p 66-6710.1016/S0043-1648(97)00138-5 ↗
40. N.P. Suh, The Delamination Theory of Wear, Wear, 1973, 25, p 111-12410.1016/0043-1648(73)90125-7 ↗