journal article·2012-06

Isothermal Oxidation Behavior of NiCoCrAlTaY Coating Deposited by High Velocity Air-Fuel Spraying

Guan-Jun Yang, Xu-Dong Xiang, Lu-Kuo Xing, Ding-Jun Li, Chang-Jiu Li, Cheng-Xin Li

Journal of Thermal Spray Technology· Volume 21· Issue 3-4
Publisher page

Abstract

Abstract The performance of a thermal barrier coating is influenced by the high temperature oxidation behavior of bond coat. In this paper, NiCoCrAlTaY bond coat was deposited by high velocity air-fuel (HVAF) spraying, and the microstructure and surface morphology of the bond coat before and after oxidation were examined. Results show that the HVAF sprayed NiCoCrAlTaY coating presented a dense microstructure and some partially melted particles in a near spherical morphology were deposited on the coating surface. A uniform α-Al2O3 oxide was formed on the HVAF sprayed MCrAlY coating surface after the pre-oxidation treatment in an argon atmosphere. A small fraction of nodular-shaped mixed oxides was formed when the MCrAlY coating was oxidized at 1000°C for 100 h. The amount of the mixed oxides did not significantly increase after 200 h oxidation. The large particles on the bond coat surface maintained homogeneous α-Al2O3 oxide scale in 200 h oxidation at 1000°C in air. A model is proposed to explain the formation of nodular-shaped mixed oxides.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A.G. Evans, M.Y. He, and J.W. Hutchinson, Mechanics-Based Scaling Laws for the Durability of Thermal Barrier Coatings, Prog. Mater. Sci., 2001, 46, p 249-27110.1016/S0079-6425(00)00007-4 ↗
2. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296, p 280-28410.1126/science.1068609 ↗
3. Q. Zhang, C.-J. Li, Y. Li, S.-L. Zhang, X.-R. Wang, G.-J. Yang, and C.-X. Li, Thermal Failure of Nanostructured Thermal Barrier Coatings with Cold-Sprayed Nanostructured NiCrAlY Bond Coat, J. Therm. Spray Technol., 2008, 17, p 838-84510.1007/s11666-008-9223-z ↗
4. A. Rabiei and A.G. Evans, Failure Mechanisms Associated with the Thermally Grown Oxide in Plasma-Sprayed Thermal Barrier Coatings, Acta Mater., 2000, 48, p 3963-397610.1016/S1359-6454(00)00171-3 ↗
5. C.H. Hsueh and E.R. Fuller, Jr., Analytical Modeling of Oxide Thickness Effects on Residual Stresses in Thermal Barrier Coatings, Scr. Mater., 2000, 42, p 781-78710.1016/S1359-6462(99)00430-3 ↗
6. F. Tang and J.M. Schoenung, Local Accumulation of Thermally Grown Oxide in Plasma-Sprayed Thermal Barrier Coatings with Rough Top-Coat/Bond-Coat Interfaces, Scr. Mater., 2005, 52, p 905-90910.1016/j.scriptamat.2004.12.032 ↗
7. E.P. Busso, H.E. Evans, Z.Q. Qian, and M.P. Taylor, Effects of Breakaway Oxidation on Local Stresses in Thermal Barrier Coatings, Acta Mater., 2010, 58, p 1242-125110.1016/j.actamat.2009.10.028 ↗
8. K. Ogawa, K. Ito, T. Shoji, D.W. Seo, H. Tezuka, and H. Kato, Effects of Ce and Si Additions to CoNiCrAlY Bond Coat Materials on Oxidation Behavior and Crack Propagation of Thermal Barrier Coatings, J. Therm. Spray Technol., 2006, 15, p 640-65110.1361/105996306X147081 ↗
9. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit, Mechanisms Controlling the Durability of Thermal Barrier Coatings, Prog. Mater. Sci., 2001, 46, p 505-55310.1016/S0079-6425(00)00020-7 ↗
10. H. Hindamtw and D.P. Whittle, Microstructure, Adhesion and Growth Kinetics of Protective Scales on Metals and Alloys, Oxid. Met., 1982, 18, p 245-28410.1007/BF00656571 ↗
11. W. Brand, H.J. Grabke, D. Toma, and J. Kriiger, The Oxidation Behaviour of Sprayed MCrAlY Coatings, Surf. Coat. Technol., 1996, 86-87, p 41-4710.1016/S0257-8972(96)03039-3 ↗
12. I. Spitsberg and K. More, Effect of Thermally Grown Oxide (TGO) Microstructure on the Durability of TBCs with PtNiAl Diffusion Bond Coats, Mater. Sci. Eng. A, 2006, 417, p 322-33310.1016/j.msea.2005.11.014 ↗
13. W.R. Chen, X. Wu, B.R. Marple, and P.C. Patnaik, Oxidation and Crack Nucleation/Growth in an Air-Plasma-Sprayed Thermal Barrier Coating with NiCrAlY Bond Coat, Surf. Coat. Technol., 2005, 197, p 109-11510.1016/j.surfcoat.2004.06.027 ↗
14. W.R. Chen, E. Irissou, X. Wu, J.-G. Legoux, and B.R. Marple, The Oxidation Behavior of TBC with Cold Spray CoNiCrAlY Bond Coat, J. Therm. Spray Technol., 2011, 20, p 132-13810.1007/s11666-010-9601-1 ↗
15. W.R. Chen, R. Archer, X. Huang, and B.R. Marple, TGO Growth and Crack Propagation in a Thermal Barrier Coating, J. Therm. Spray Technol., 2008, 17, p 858-86410.1007/s11666-008-9251-8 ↗
16. S. Takahashi, M. Yoshiba, and Y. Harada, Nano-Characterization of Ceramic Top-Coat/Metallic Bond-Coat Interface for Thermal Barrier Coating Systems by Plasma Spraying, Mater. Trans., 2003, 44, p 1181-118910.2320/matertrans.44.1181 ↗
17. Y. Li, C.-J. Li, Q. Zhang, G.-J. Yang, and C.-X. Li, Influence of TGO Composition on the Thermal Shock Lifetime of Thermal Barrier Coatings with Cold-Sprayed MCrAlY Bond Coat, J. Therm. Spray Technol., 2010, 19, p 168-17710.1007/s11666-009-9372-8 ↗
18. P. Puetz, X. Huang, R.S. Lima, Q. Yang, and L. Zhao, Characterization of Transient Oxide Formation on CoNiCrAlY After Heat Treatment in Vacuum and Air, Surf. Coat. Technol., 2010, 205, p 647-65710.1016/j.surfcoat.2010.07.079 ↗
19. F. Tang, L. Ajdelsztajn, G.E. Kim, V. Provenzano, and J.M. Schoenung, Effects of Surface Oxidation During HVOF Processing on the Primary Stage Oxidation of a CoNiCrAlY Coating, Surf. Coat. Technol., 2004, 185, p 228-23310.1016/j.surfcoat.2003.11.020 ↗
20. F. Tang, L. Ajdelsztajn, G.E. Kim, V. Provenzano, and J.M. Schoenung, Effects of Variations in Coating Materials and Process Conditions on the Thermal Cycle Properties of NiCrAlY/YSZ Thermal Barrier Coatings, Mater. Sci. Eng. A, 2006, 425, p 94-10610.1016/j.msea.2006.03.043 ↗
21. L. Ajdelsztajn, F. Tang, G.E. Kim, V. Provenzano, and J.M. Schoenung, Synthesis and Oxidation Behavior of Nanocrystalline MCrAlY Bond Coatings, J. Therm. Spray Technol., 2005, 14, p 23-3010.1361/10599630522693 ↗
22. M. Matsumoto, T. Kato, K. Hayakawa, N. Yamaguchi, S. Kitaoka, and H. Matsubara, The Effect of Pre-Oxidation Atmosphere on the Durability of EB-PVD Thermal Barrier Coatings with CoNiCrAlY Bond Coats, Surf. Coat. Technol., 2008, 202, p 2743-274810.1016/j.surfcoat.2007.10.001 ↗
23. P. Richer, M. Yandouzi, L. Beauvais, and B. Jodoin, Oxidation Behaviour of CoNiCrAlY Bond Coats Produced by Plasma, HVOF and Cold Gas Dynamic Spraying, Surf. Coat. Technol., 2010, 204, p 3962-397410.1016/j.surfcoat.2010.03.043 ↗
24. Y. Li, C.-J. Li, Q. Zhang, L.-K. Xing, and G.-J. Yang, Effect of Chemical Compositions and Surface Morphologies of MCrAlY Coating on Its Isothermal Oxidation Behavior, J. Therm. Spray Technol., 2011, 20, p 121-13110.1007/s11666-010-9590-0 ↗
25. Y. Li, C.-J. Li, G.-J. Yang, and L.-K. Xing, Thermal Fatigue Behavior of Thermal Barrier Coatings with the MCrAlY Bond Coats by Cold Spraying and Low-pressure Plasma Spraying, Surf. Coat. Technol., 2010, 205, p 2225-223310.1016/j.surfcoat.2010.08.144 ↗
26. M.S. Ali, S.H. Song, and P. Xiao, Degradation of Thermal Barrier Coatings Due to Thermal Cycling up to 1150°C, J. Mater. Sci., 2002, 37, p 2097-210210.1023/A:1015245920054 ↗
27. M. Dressler, M. Nofz, I. Dorfel, and R.S. Neumann, Influence of Sol-Gel Derived Alumina Coatings on Oxide Scale Growth of Nickel-Base Superalloy Inconel-718, Surf. Coat. Technol., 2008, 202, p 6095-610210.1016/j.surfcoat.2008.07.018 ↗
28. J. Kawakita, H. Katanoda, M. Watanabe, K. Yokoyama, and S. Kuroda, Warm Spraying: An Improved Spray Process to Deposit Novel Coatings, Surf. Coat. Technol., 2008, 202, p 4369-437310.1016/j.surfcoat.2008.04.011 ↗
29. K.H. Kim, M. Watanabe, and S. Kuroda, Bonding Mechanisms of Thermally Softened Metallic Powder Particles and Substrates Impacted at High Velocity, Surf. Coat. Technol., 2010, 204, p 2175-218010.1016/j.surfcoat.2009.12.001 ↗
30. F.-H. Yuan, Z.-X. Chen, Z.-W. Huang, Z.-G. Wang, and S.-J. Zhu, Oxidation Behavior of Thermal Barrier Coatings with HVOF and Detonation-Sprayed NiCrAlY Bond Coats, Corros. Sci., 2008, 50, p 1608-161710.1016/j.corsci.2008.02.002 ↗
31. H. Yamano, K. Tani, Y. Harada, and T. Teratani, Oxidation Control with Chromate Pretreatment of MCrAlY Unmelted Particle and Bond Coat in Thermal Barrier Systems, J. Therm. Spray Technol., 2008, 17, p 275-28310.1007/s11666-008-9169-1 ↗
32. E. Lugscheider, C. Herbst, and L. Zhao, Parameter Studies on High-Velocity Oxy-Fuel Spraying of MCrAlY Coatings, Surf. Coat. Technol., 1998, 108-109, p 16-2310.1016/S0257-8972(98)00630-6 ↗
33. C.R.C. Lima and J.M. Guilemany, Adhesion Improvements of Thermal Barrier Coatings with HVOF Thermally Sprayed Bond Coats, Surf. Coat. Technol., 2007, 201, p 4694-470110.1016/j.surfcoat.2006.10.005 ↗
34. W.R. Chen, X. Wu, B.R. Marple, D.R. Nagy, and P.C. Patnaik, TGO Growth Behaviour in TBCs with APS and HVOF Bond Coats, Surf. Coat. Technol., 2008, 202, p 2677-268310.1016/j.surfcoat.2007.09.042 ↗
35. X. Zhe, C.A. Dioka, and A. Hendry, Aluminothermic Reduction of Zirconia, J. Eur. Ceram. Soc., 2005, 25, p 695-70210.1016/j.jeurceramsoc.2003.12.033 ↗
36. F. Tang, L. Ajdelsztajn, and J.M. Schoenung, Influence of Cryomilling on the Morphology and Composition of the Oxide Scales Formed on HVOF CoNiCrAlY Coatings, Oxid. Met., 2004, 61, p 219-23810.1023/B:OXID.0000025332.26757.41 ↗
37. N. Birks and H. Rickert, Oxidation Mechanism of Some Nickel-Chromium Alloys, J. Inst. Met., 1963, 91, p 308-310
38. F.S. Pettit, Oxidation Mechanisms for Nickel-aluminum Alloys at Temperatures Between 900 Degrees and 1300 Degrees C, Trans. Metall. Soc. AIME, 1967, 239, p 1296-1304
39. G.R. Wallwork and A.Z. Hed, Some Limiting Factors in the Use of Alloys at High Temperatures, Oxid. Met., 1971, 3, p 171-18410.1007/BF00603485 ↗
40. N. Birks, G.H. Meier, and F.S. Pettit, Introduction to the High-temperature Oxidation of Metals, 2nd ed., Cambridge University Press, Cambridge, 200610.1017/CBO9781139163903 ↗
41. H.E. Evans and M.P. Taylor, Diffusion Cells and Chemical Failure of MCrAlY Bond Coats in Thermal-Barrier Coating Systems, Oxid. Metals, 2001, 55, p 17-3410.1023/A:1010369024142 ↗