journal article·2011-12

Fabrication and Properties of Plasma-Sprayed Al2O3/ZrO2 Composite Coatings

N. Dejang, A. Limpichaipanit, A. Watcharapasorn, S. Wirojanupatump, P. Niranatlumpong, S. Jiansirisomboon

Publisher page

Abstract

Al2O3/xZrO2 (where x = 0, 3, 13, and 20 wt.%) composite coatings were deposited onto mild steel substrates by atmospheric plasma spraying of mixed α-Al2O3 and nano-sized monoclinic-ZrO2 powders. Microstructural investigation showed that the coatings comprised well-separated Al2O3 and ZrO2 lamellae, pores, and partially molten particles. The coating comprised mainly of metastable γ-Al2O3 and tetragonal-ZrO2 with trace of original α-Al2O3 and monoclinic-ZrO2 phases. The effect of ZrO2 addition on the properties of coatings were investigated in terms of microhardness, fracture toughness, and wear behavior. It was found that ZrO2 improved the fracture toughness, reduced friction coefficient, and wear rate of the coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. L. Pawlowski, The Science and Engineering of Thermal Spray Coatings, 2nd ed., John Wiley & Sons, New York, 200810.1002/9780470754085 ↗
2. R. McPherson, Formation of Metastable Phases in Flame and Plasma Prepared Alumina, J. Mater. Sci., 1973, 8, p 851-85810.1007/BF02397914 ↗
3. R. McPherson, On the Formation of Thermally Sprayed Alumina Coatings, J. Mater. Sci., 1980, 15, p 3141-314910.1007/BF00550387 ↗
4. D.I. Pantelis, P. Psyllaki, and N. Alexopoulos, Tribological Behaviour of Plasma-Sprayed Al2O3 Coatings Under Severe Wear Conditions, Wear, 2000, 237, p 197-20410.1016/S0043-1648(99)00324-5 ↗
5. Z.J. Yin, S.Y. Tao, X.M. Zhou, and C.X. Ding, Particle In-flight Behavior and Its Influence on the Microstructure and Mechanical Properties of Plasma-sprayed Al2O3 coatings, J. Eur. Ceram. Soc., 2008, 28, p 1143-114810.1016/j.jeurceramsoc.2007.09.050 ↗
6. A. Abdel-Samad, A.M.M. El-Bahloul, E. Lugscheider, and S.A. Rassoul, A Comparative Study on Thermally Sprayed Alumina Based Ceramic Coatings, J. Mater. Sci., 2000, 35, p 3127-313010.1023/A:1004824104162 ↗
7. R.S. Lima and B.R. Marple, Superior Performance of High-Velocity Oxyfuel-sprayed Nanostructured TiO2 in Comparison to Air Plasma-Sprayed Conventional Al2O3-13TiO2, J. Therm. Spray Technol., 2005, 14(3), p 397-40410.1361/105996305X59413 ↗
8. N. Dejang, A. Watcharapasorn, S. Wirojupatump, P. Niranatlumpong, and S. Jiansirisomboon, Fabrication and Properties of Plasma-Sprayed Al2O3/TiO2 Composite Coatings: A Role of Nano-Sized TiO2 Addition, Surf. Coat. Technol., 2010, 204, p 1651-165710.1016/j.surfcoat.2009.10.052 ↗
9. Y. Wang, S. Jiang, M. Wang, S. Wang, T.D. Xiao, and P.R. Strutt, Abrasive Wear Characteristics of Plasma Sprayed Nanostructured Alumina/Titania Coatings, Wear, 2000, 237, p 176-18510.1016/S0043-1648(99)00323-3 ↗
10. H. Luo, D. Goberman, L. Shaw, and M. Gell, Indentation Fracture Behavior of Plasma-Sprayed Nanostructured Al2O3-13 wt.% TiO2 Coatings, Mater. Sci. Eng., 2003, A346(1-2), p 237-24510.1016/S0921-5093(02)00523-3 ↗
11. P.F. Becher, Toughening Behavior in Ceramics Associated with the Transformation of Tetragonal ZrO2, Acta Metall., 1986, 34(10), p 1885-189110.1016/0001-6160(86)90246-4 ↗
12. P. Ctibor, J. Sedláček, and K. Neufuss, Influence of Chemical Composition on Dielectric Properties of Al2O3 and ZrO2 Plasma Deposits, Ceram. Int., 2003, 29, p 527-53210.1016/S0272-8842(02)00197-9 ↗
13. J. Chevalier, A.H. De Aza, G. Fantozzi, M. Schehl, and R. Torrecillas, Extending the Lifetime of Ceramic Orthopedic Implants, Adv. Mater., 2000, 12(21), p 1619-162110.1002/1521-4095(200011)12:21<1619::AID-ADMA1619>3.0.CO;2-O ↗
14. J. Chevalier, S. Deville, G. Fantozzi, J.F. Bartolome, C. Pecharroman, J.S. Moya, L.A. Diaz, and R. Torrecillas, Nanostructured Ceramic Oxides with a Slow Crack Growth Resistance Close to Covalent Materials, Nano Lett., 2005, 5(7), p 1297-130110.1021/nl050492j ↗
15. J.O. Berghaus, J.G. Legoux, C. Moreau, F. Tarasi, and T. Chraska, Mechanical and Thermal Transport Properties of Suspension Thermal-Sprayed Alumina-Zirconia Composite Coatings, J. Therm. Spray Technol., 2008, 17(1), p 91-10410.1007/s11666-007-9146-0 ↗
16. E.H. Jordan, L. Xie, X. Ma, M. Gell, N.P. Padture, B. Cetegen, A. Ozturk, J. Roth, T.D. Xiao, and P.E.C. Bryant, Superior Thermal Barrier Coatings using Solution Precursor Plasma Spray, J. Therm. Spray Technol., 2004, 13(1), p 57-6510.1007/s11666-004-0050-6 ↗
17. D. Chen, E.H. Jordan, and M. Gell, Microstructure of Suspension Plasma Spray and Air Plasma Spray Al2O3-ZrO2 Composite Coatings, J. Therm. Spray Technol., 2009, 18(3), p 421-42610.1007/s11666-009-9306-5 ↗
18. B. Lianga, H. Liao, C. Ding, and C. Coddet, Nanostructured Zirconia-30 vol.% Alumina Composite Coatings Deposited by Atmospheric Plasma Spraying, Thin Solid Films, 2005, 484, p 225-23110.1016/j.tsf.2005.02.040 ↗
19. J. Ahn, B. Hwang, E.P. Song, S. Lee, and N.J. Kim, Correlation of Microstructure and Wear Resistance of Al2O3-TiO2 Coatings Plasma Sprayed with Nanopowders, Metall. Mater. Trans., 2006, 37A, p 1851-186110.1007/s11661-006-0128-5 ↗
20. V. Fervel, B. Normand, and C. Coddet, Tribological Behavior of Plasma Sprayed Al2O3 Based Cermet Coatings, Wear, 1999, 230, p 70-7710.1016/S0043-1648(99)00096-4 ↗
21. D. Goberman, Y.H. Sohn, L. Shaw, E. Jordan, and M. Gell, Microstructure Development of Al2O3-13 wt.% TiO2 Plasma Sprayed Coatings Derived from Nanocrystalline Powders, Acta Mater., 2002, 50, p 1141-115210.1016/S1359-6454(01)00414-1 ↗
22. A.L. Vasiliev, N.P. Padture, and X. Ma, Coatings of Metastable Ceramics Deposited by Solution-Precursor Plasma Spray: I. Binary ZrO2-Al2O3 System, Acta Mater., 2006, 54, p 4913-492010.1016/j.actamat.2006.06.025 ↗
23. F. Cardarelli, Materials Handbook: A Concise Desktop Reference, 2nd ed., Springer, Germany, 2008
24. F.F. Lange, Effect of Microstructure on Strength of Si3N4-SiC Composite Systems, J. Am. Ceram. Soc., 1973, 56, p 445-44810.1111/j.1151-2916.1973.tb12520.x ↗
25. B. Normand, V. Fervel, C. Coddet, and V. Nikitine, Tribological Properties of Plasma Sprayed Alumina-Titania Coatings: Role and Control of the Microstructure, Surf. Coat. Technol., 2000, 123, p 278-28710.1016/S0257-8972(99)00532-0 ↗
26. C.B. Carter and M.G. Norton, Ceramic Materials: Science and Engineering, Springer, Germany, 2007
27. K. Ramachandran, V. Selvarajan, P.V. Ananthapadmanabhan, and K.P. Sreekumar, Microstructure, Adhesion, Microhardness, Abrasive Wear Resistance and Electrical Resistivity of the Plasma Sprayed Alumina and Alumina-Titania Coatings, Thin Solid Films, 1998, 315, p 144-15210.1016/S0040-6090(97)00738-4 ↗
28. P.Y. Pekshev and I.G. Murzin, Modelling of Porosity of Plasma Sprayed Materials, Surf. Coat. Technol., 1993, 56, p 199-20810.1016/0257-8972(93)90252-J ↗
29. D. Sarkar, S. Adak, and N.K. Mitra, Preparation and Characterization of an Al2O3-ZrO2 Nanocomposite, Part I: Powder Synthesis and Transformation Behavior During Fracture, Composites A, 2007, 38, p 124-13110.1016/j.compositesa.2006.01.005 ↗
30. T. Ohji, Y.K. Jeong, Y.H. Choa, and K. Niihara, Strengthening and Toughening Mechanisms of Ceramic Nanocomposites, J. Am. Ceram. Soc., 1998, 81(6), p 1453-146010.1111/j.1151-2916.1998.tb02503.x ↗
31. Y.J. He, A.J.A. Winnubst, D.J. Schipper, A.J. Burggraaf, and H. Verweij, Effects of a Second Phase on the Tribological Properties of A12O3 and ZrO2 Ceramics, Wear, 2007, 210, p 178-187
32. M. Gell, E.H. Jordan, Y.H. Sohn, D. Goberman, L. Shaw, and T.D. Xiao, Development and Implementation of Plasma Sprayed Nanostructured Ceramic Coatings, Surf. Coat. Technol., 2001, 146-147, p 48-5410.1016/S0257-8972(01)01470-0 ↗
33. R.S. Lima, C. Moreau, and B.R. Marple, HVOF-Sprayed Coatings Engineered from Mixtures of Nanostructured and Submicron Al2O3-TiO2 Powders: An Enhanced Wear Performance, J. Therm. Spray Technol., 2007, 16(5-6), p 866-87210.1007/s11666-007-9092-x ↗
34. D.J. Green, Critical Microstructures for Microcracking in Al2O3-ZO2 Composites, J. Am. Ceram. Soc., 1982, 65(12), p 610-61410.1111/j.1151-2916.1982.tb09939.x ↗
35. P.F. Becher, Microstructural Design of Toughened Ceramics, J. Am. Ceram. Soc., 1991, 74(2), p 255-26910.1111/j.1151-2916.1991.tb06872.x ↗
36. R. Lakshminarayanan, D.K. Shetty, and R.A. Cutler, Toughening of Layered Ceramic Composites with Residual Surface Compression, J. Am. Ceram. Soc., 1996, 79, p 79-8710.1111/j.1151-2916.1996.tb07883.x ↗
37. W.H. Tuan and R.Z. Chen, Interactions Between Toughening Mechanisms—Transformation Toughening vs. Plastic Deformation, J. Mater. Res., 2002, 17, p 2921-292810.1557/JMR.2002.0423 ↗
38. H. Richard, J. Hannink, P.M. Kelly, and B.C. Muddle, Transformation Toughening in Zirconia-Containing Ceramics, J. Am. Ceram. Soc., 2000, 83(3), p 461-48710.1111/j.1151-2916.2000.tb01221.x ↗
39. T.C. Wang, R.Z. Chen, and W.H. Tuan, Effect of Zirconia Addition on the Oxidation Resistance of Ni-Toughened Al2O3, J. Eur. Ceram. Soc., 2004, 24, p 833-84010.1016/S0955-2219(03)00337-6 ↗
40. Y. Wang, Nano- and Submicron-structured Sulfide Self-Lubricating Coatings Produced by Thermal Spraying, Tribol. Lett., 2004, 17(2), p 165-16810.1023/B:TRIL.0000032441.09602.40 ↗
41. H.-S. Ahn, J.Y. Kim, and D.S. Lim, Tribological Behaviour of Plasma-Sprayed Zirconia Coatings, Wear, 1997, 203-204, p 77-8710.1016/S0043-1648(96)07395-4 ↗
42. X.D. Wang, H.B. Lou, K. Ståhl, J. Bednarcik, H. Franz, and J.Z. Jiang, Tensile Behavior of Orthorhombic α″-Titanium alloy Studied by In Situ X-ray Diffraction, Mater. Chem. Phys., 2008, 112, p 213-21710.1016/j.matchemphys.2008.05.041 ↗