Preparation of MCrAlY–Al2O3 Composite Coatings with Enhanced Oxidation Resistance through a Novel Powder Manufacturing Process
Source abstract
Abstract
Abstract MCrAlY–Al2O3 composite coatings were prepared by high-velocity oxygen fuel thermal spraying with bespoke composite powder feedstock for high-temperature applications. Powder processing via a suspension route was employed to achieve a fine dispersion of α-Al2O3 submicron particles on the MCrAlY powder surface. This was, however, compromised by ~ 50% less flowability of the feedstock during spraying. Nevertheless, the novel powder manufacturing process introduced in this study has shown potential as an alternative route to prepare tailored composite powder feedstock for the production of metal matrix composites. In addition, the newly developed MCrAlY–Al2O3 composite coatings exhibited superior oxidation resistance, compared to conventional MCrAlY coatings, with the formation of nearly exclusively Al2O3 scale after isothermal oxidation at 900 °C for 10 h. The addition of α-Al2O3 particles in the MCrAlY coatings as a second phase was found to have promoted the formation of YAG oxides (YxAlyOz) during spraying and also accelerated the outwards diffusion of Al, which resulted in enhanced oxidation resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Flame retardant materials and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. H. Asteman and M. Spiegel, A Comparison of the Oxidation Behaviours of Al2O3 formers and Cr2O3 formers at 700 C–Oxide Solid Solutions Acting as a Template for Nucleation, Corros. Sci., 2008, 50(6), p 1734-174310.1016/j.corsci.2007.12.012 ↗
2. H. Josefsson, F. Liu, J.E. Svensson, M. Halvarsson, and L.G. Johansson, Oxidation of FeCrAl Alloys at 500-900 °C in Dry O2, Mater. Corros., 2005, 56(11), p 801-80510.1002/maco.200503882 ↗
3. J. Nicholls, Advances in Coating Design for High-Performance Gas Turbines, MRS Bull., 2003, 28(9), p 659-67010.1557/mrs2003.194 ↗
4. D. Naumenko, R. Pillai, A. Chyrkin, and W. Quadakkers, Overview on Recent Developments of Bondcoats for Plasma-Sprayed Thermal Barrier Coatings, J. Therm. Spray Technol., 2017, 26(8), p 1743-175710.1007/s11666-017-0649-z ↗
5. R. Lima, D. Nagy, and B. Marple, Bond Coat Engineering Influence on the Evolution of the Microstructure, Bond Strength, and Failure of TBCs Subjected to Thermal Cycling, J. Therm. Spray Technol., 2015, 24(1-2), p 152-159
6. J. Bergholz, B.A. Pint, K.A. Unocic, and R. Vaßen, Fabrication of Oxide Dispersion Strengthened Bond Coats with Low Al2O3 Content, J. Therm. Spray Technol., 2017, 26(5), p 868-87910.1007/s11666-017-0550-9 ↗
7. G. Mauer, D. Sebold, and R. Vaßen, MCrAlY Bondcoats by High-Velocity Atmospheric Plasma Spraying, J. Therm. Spray Technol., 2014, 23(1), p 140-14610.1007/s11666-013-0026-5 ↗
8. T. Zhang, C. Huang, H. Lan, L. Du, and W. Zhang, Oxidation and Hot Corrosion Behavior of Plasma-Sprayed MCrAlY–Cr2O3 Coatings, J. Therm. Spray Technol., 2016, 25(6), p 1208-121610.1007/s11666-016-0433-5 ↗
9. N. Bala, H. Singh, S. Prakash, and J. Karthikeyan, Investigations on the Behavior of HVOF and Cold Sprayed Ni-20Cr Coating on T22 Boiler Steel in Actual Boiler Environment, J. Therm. Spray Technol., 2012, 21(1), p 144-15810.1007/s11666-011-9698-x ↗
10. S. Paul and M.D.F. Harvey, Corrosion Testing of Ni Alloy HVOF Coatings in High Temperature Environments for Biomass Applications, J. Therm. Spray Technol., 2013, 22(2), p 316-32710.1007/s11666-012-9820-8 ↗
11. S. Hong, Y. Wu, G. Li, B. Wang, W. Gao, and G. Ying, Microstructural Characteristics of High-Velocity Oxygen-Fuel (HVOF) Sprayed Nickel-Based Alloy Coating, J. Alloy. Compd., 2013, 581, p 398-40310.1016/j.jallcom.2013.07.109 ↗
12. A.A. Khan, W. de Jong, P.J. Jansens, and H. Spliethoff, Biomass Combustion in Fluidized Bed Boilers: Potential Problems and Remedies, Fuel Process. Technol., 2009, 90(1), p 21-5010.1016/j.fuproc.2008.07.012 ↗
13. G.R. Holcomb, B.S. Covino Jr., S.J. Bullard, S.D. Cramer, M. Ziomek-Moroz, and D.E. Alman, Ultra Supercritical Turbines–Steam Oxidation, Albany Research Center (ARC), Albany, 2004
14. G.R. Holcomb, Steam Oxidation and Chromia Evaporation in Ultrasupercritical Steam Boilers and Turbines, J. Electrochem. Soc., 2009, 156(9), p C292-C29710.1149/1.3155442 ↗
15. H.J. Grabke, Oxidation of NiAl and FeAl, Intermetallics, 1999, 7(10), p 1153-115810.1016/S0966-9795(99)00037-0 ↗
16. D. Maghet, G. Marginean, I. Mitelea, A. Davidescu, and W. Brandl, Comparison of oxidation behaviour of various thermally sprayed MCrAlY coatings, The European corrosion congress, Breisgau, 2007
17. D. Utu, G. Marginean, V.-A. Serban, and C. Codrean, Corrosion Behavior of Laser Remelted CoNiCrAlY Based Composite Coatings, Engineering, 2010, 2(05), p 32210.4236/eng.2010.25042 ↗
18. W. Brandl, D. Toma, J. Krüger, H. Grabke, and G. Matthäus, The Oxidation Behaviour of HVOF Thermal-Sprayed MCrAlY Coatings, Surf. Coat. Technol., 1997, 94, p 21-2610.1016/S0257-8972(97)00470-2 ↗
19. Y.N. Wu, M. Qin, Z.C. Feng, Y. Liang, C. Sun, and F.H. Wang, Improved Oxidation Resistance of NiCrAlY Coatings, Mater. Lett., 2003, 57(16), p 2404-2408
20. Y.N. Wu, G. Zhang, Z.C. Feng, B.C. Zhang, Y. Liang, and F.J. Liu, Oxidation Behavior of Laser Remelted Plasma Sprayed NiCrAlY and NiCrAlY–Al2O3 Coatings, Surf. Coat. Technol., 2001, 138(1), p 56-6010.1016/S0257-8972(00)01102-6 ↗
21. G. Bolelli, A. Candeli, L. Lusvarghi, A. Ravaux, K. Cazes, A. Denoirjean, S. Valette, C. Chazelas, E. Meillot, and L. Bianchi, Tribology of NiCrAlY + Al2O3 Composite Coatings by Plasma Spraying with Hybrid Feeding of Dry Powder + Suspension, Wear, 2015, 344–345, p 69-8510.1016/j.wear.2015.10.014 ↗
22. A. Clare and A. Kennedy, Additive Manufacturing. Google Patents, 2016.
23. H. Tan, D. Hao, K. Al-Hamdani, F. Zhang, Z. Xu, and A.T. Clare, Direct Metal Deposition of TiB 2/AlSi10 Mg Composites Using Satellited Powders, Mater. Lett., 2018, 214, p 123-12610.1016/j.matlet.2017.11.121 ↗
24. F. Zhang, M. Mei, K. Al-Hamdani, H. Tan, and A.T. Clare, Novel Nucleation Mechanisms Through Satelliting in Direct Metal Deposition of Ti-15Mo, Mater. Lett., 2018, 213, p 197-20010.1016/j.matlet.2017.11.036 ↗
25. K.S. Al-Hamdani, J.W. Murray, T. Hussain, A. Kennedy, and A.T. Clare, Cold Sprayed Metal-Ceramic Coatings using Satellited Powders, Mater. Lett., 2017, 198, p 184-18710.1016/j.matlet.2017.03.175 ↗
26. M. Simonelli, N.T. Aboulkhair, P. Cohen, J.W. Murray, A.T. Clare, C. Tuck, and R.J.M. Hague, A Comparison of Ti-6Al-4 V In Situ Alloying in Selective Laser Melting Using Simply-Mixed and Satellited Powder Blend Feedstocks, Mater. Charact., 2018, 143, p 118-12610.1016/j.matchar.2018.05.039 ↗
27. J. Bratberg, H. Mao, L. Kjellqvist, A. Engström, P. Mason, and Q. Chen, The Development and Validation of a New Thermodynamic Database for Ni-Based Alloys, Superalloys, 2012, 12, p 803-81210.7449/2012/Superalloys_2012_803_812 ↗
28. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman, Thermo-Calc & DICTRA, Computational Tools for Materials Science, Calphad, 2002, 26(2), p 273-31210.1016/S0364-5916(02)00037-8 ↗
29. Z. Pala, M. Bai, F. Lukac, and T. Hussain, Laser Clad and HVOF-Sprayed Stellite 6 Coating in Chlorine-Rich Environment with KCl at 700 °C. Oxid. Met. 2017, p 1-23.10.1007/s11085-017-9776-7 ↗
30. M. Bai, L. Reddy, and T. Hussain, Experimental and Thermodynamic Investigations on the Chlorine-Induced Corrosion of HVOF Thermal Sprayed NiAl Coatings and 304 Stainless Steels at 700 °C, Corros. Sci., 2018, 135, p 147-15710.1016/j.corsci.2018.02.047 ↗
31. T.J. Nijdam and W.G. Sloof, Microstructural Evolution of a MCrAlY Coating Upon Isothermal Annealing, Mater. Charact., 2008, 59(12), p 1697-170410.1016/j.matchar.2008.03.011 ↗
32. K. Ma and J.M. Schoenung, Thermodynamic Investigation into the Equilibrium Phases in the NiCoCrAl System at Elevated Temperatures, Surf. Coat. Technol., 2010, 205(7), p 2273-228010.1016/j.surfcoat.2010.09.009 ↗
33. K. Ma, F. Tang, and J.M. Schoenung, Investigation into the Effects of Fe Additions on the Equilibrium Phase Compositions, Phase Fractions and Phase Stabilities in the Ni–Cr–Al System, Acta Mater., 2010, 58(5), p 1518-152910.1016/j.actamat.2009.10.059 ↗
34. J. Liang, H. Wei, Y. Zhu, T. Jin, X. Sun, and Z. Hu, Phase Stabilities in a NiCrAlYRe Coating Alloy, Surf. Coat. Technol., 2012, 206(11), p 2746-275010.1016/j.surfcoat.2011.11.021 ↗
35. J. Liang, H. Wei, Y. Zhu, X. Sun, Z. Hu, M. Dargusch, and X. Yao, Phase Constituents and Thermal Expansion Behavior of a NiCrAlYRe Coating Alloy, J. Mater. Sci., 2011, 46(2), p 500-50810.1007/s10853-010-4953-y ↗
36. B. Baufeld and M. Schmücker, Microstructural Evolution of a NiCoCrAlY Coating on an IN100 Substrate, Surf. Coat. Technol., 2005, 199(1), p 49-5610.1016/j.surfcoat.2004.06.014 ↗
37. D.R.G. Achar, R. Munoz-Arroyo, L. Singheiser, and W.J. Quadakkers, Modelling of Phase Equilibria in MCrAlY Coating Systems, Surf. Coat. Technol., 2004, 187(2), p 272-28310.1016/j.surfcoat.2004.02.018 ↗
38. L. Wu, R. Wu, P. Xiao, T. Osada, K. Lee, and M. Bai, A Prominent Driving Force for the Spallation of Thermal Barrier Coatings: Chemistry Dependent Phase Transformation of the Bond Coat, Acta Mater., 2017, 137, p 22-3510.1016/j.actamat.2017.06.037 ↗
39. Y. Chen, X. Zhao, M. Bai, A. Chandio, R. Wu, and P. Xiao, Effect of Platinum Addition on Oxidation Behaviour of γ/γ′ Nickel Aluminide, Acta Mater., 2015, 86, p 319-33010.1016/j.actamat.2014.12.023 ↗
40. Y. Chen, X. Zhao, and P. Xiao, Effect of Microstructure on Early Oxidation of MCrAlY Coatings, Acta Mater., 2018, 159, p 150-16210.1016/j.actamat.2018.08.018 ↗
41. B. Mann and B.J.W. Prakash, High Temperature friction and wear characteristics of various coating materials for steam valve spindle application, Wear, 2000, 240(1-2), p 223-23010.1016/S0043-1648(00)00390-2 ↗
42. H.-Y. Wang, D.-W. Zuo, M.-D. Wang, G.-F. Sun, M. Hong, and Y.-L. Sun, High Temperature Frictional Wear Behaviors of Nano-Particle Reinforced NiCoCrAlY Cladded Coatings, Trans. Nonferrous Met. Soc. China, 2011, 21(6), p 1322-132810.1016/S1003-6326(11)60860-1 ↗
43. K. Bobzin, T. Schläfer, K. Richardt, and M. Brühl, Development of Oxide Dispersion Strengthened MCrAlY Coatings, J. Therm. Spray Technol., 2008, 17(5-6), p 853-85710.1007/s11666-008-9244-7 ↗
44. L. Zhao, M. Parco, and E.J.S. Lugscheider, Technology, Wear Behaviour of Al2O3 Dispersion Strengthened MCrAlY Coating, Surf. Coat. Technol., 2004, 184(2-3), p 298-30610.1016/j.surfcoat.2003.10.055 ↗
45. Y. Cao, C. Huang, W. Liu, W. Zhang, and L. Du, Effects of Boron Carbide Content on the Microstructure and Properties of Atmospheric Plasma-Sprayed NiCoCrAlY/Al2O3-B4C Composite Coatings, J. Therm. Spray Technol., 2014, 23(4), p 716-72410.1007/s11666-014-0061-x ↗
46. K. Ma, X. Tang, and J.M. Schoenung, Mechanistic Investigation into the Role of Aluminum Diffusion in the Oxidation Behavior of Cryomilled NiCrAlY Bond Coat, J. Wuhan Univ. Technol. Mater. Sci. Edit., 2016, 31(1), p 35-4310.1007/s11595-016-1326-7 ↗
47. M. Okada, R. Vassen, M. Karger, D. Sebold, D. Mack, M.O. Jarligo, and F. Bozza, Deposition and Oxidation of Oxide-Dispersed CoNiCrAlY Bondcoats, J. Therm. Spray Technol., 2014, 23(1-2), p 147-15310.1007/s11666-013-0037-2 ↗
48. D. Toma, W. Brandl, and U. Köster, The Characteristics of Alumina Scales Formed on HVOF-Sprayed MCrAlY Coatings, Oxid. Met., 2000, 53(1), p 125-13710.1023/A:1004586814837 ↗
49. D. Whittle and J. Stringer, Improvements in High Temperature Oxidation Resistance by Additions of Reactive Elements or Oxide Dispersions, Philos. Trans. R. Soc. Lond. Ser. A Math. Phys. Sci., 1980, 295(1413), p 309-329
50. B. Pint, Progress in Understanding the Reactive Element Effect Since the Whittle and Stringer Literature Review, in Proceedings of John Stringer Symposium on High Temperature Corrosion. ASM International Materials Park, Ohio, 2003, p. 9-19
51. B. Pint, Experimental Observations in Support of the Dynamic-Segregation Theory to Explain the Reactive-Element Effect, Oxid. Met., 1996, 45(1-2), p 1-3710.1007/BF01046818 ↗
52. J.G. Goedjen and D.A. Shores, The Effect of Alloy Grain Size on the Transient Oxidation Behavior of an Alumina-Forming Alloy, Oxid. Met., 1992, 37(3), p 125-14210.1007/BF00665186 ↗
53. L. Badrour, E.G. Moya, J. Bernardini, and F. Moya, Bulk Diffusion of 110Ag Tracer in Al2O3, Scr. Metall., 1986, 20(9), p 1217-122210.1016/0036-9748(86)90034-7 ↗
54. A. Vlad, A. Stierle, N. Kasper, H. Dosch, and M. Rühle, In Situ X-Ray Study of the γ- to α-Al2O3 Phase Transformation During Atmospheric Pressure Oxidation of NiAl(110), J. Mater. Res., 2006, 21(12), p 3047-305710.1557/jmr.2006.0397 ↗
55. R. Cueff, H. Buscail, E. Caudron, C. Issartel, and F. Riffard, Oxidation Behaviour of Kanthal A1 and Kanthal AF at 1173 K: Effect of Yttrium Alloying Addition, Appl. Surf. Sci., 2003, 207(1), p 246-25410.1016/S0169-4332(02)01506-4 ↗