journal article·2013-10

Sliding Wear Performance of Plasma-Sprayed Al2O3-Cr2O3 Composite Coatings Against Graphite under Severe Conditions

Kai Yang, Xiaming Zhou, Chenguang Liu, Shunyan Tao, Chuanxian Ding

Publisher page

Abstract

Al2O3, Cr2O3, and Al2O3-Cr2O3 composite coatings were produced by plasma spraying. Their tribological properties were evaluated at high load conditions. The average friction coefficients, wear rates, and worn surface temperatures of the coating/graphite pairs were measured. Compared with the single coating/graphite pairs, the friction coefficients of composite coating/graphite pairs are more stable. The corresponding wear rates and worn surface temperatures are lower, which may be conducive to the formation of more effective and stable graphite transfer film on the surface of the coating subjected to abrasion. Especially, 10wt.%Al2O3-90wt.%Cr2O3 (AC90) composite coating shows better anti-wear performance, which may be attributed to its higher thermal conduction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. K. Maiti and A. Sil, Relationship Between Fracture Toughness Characteristics and Morphology of Sintered Al2O3 Ceramics, Ceram. Int., 2010, 36(8), p 2337-234410.1016/j.ceramint.2010.07.031 ↗
2. Ch.I. Sarafoglou, D.I. Pantelis, S. Beauvais, and M. Jeandin, Study of Al2O3 Coatings on AISI, 316 stainless Steel Obtained by Controlled Atmosphere Plasma Spraying (CAPS), Surf. Coat. Technol., 2007, 202(1), p 155-16110.1016/j.surfcoat.2007.05.021 ↗
3. D. Zois, A. Lekatou, M. Vardavoulias, and A. Vazdirvanidis, Nanostructured Alumina Coatings Manufactured by Air Plasma Spraying: Correlation of Properties with the Raw Powder Microstructure, J. Alloys Compd., 2010, 495(2), p 611-61610.1016/j.jallcom.2009.10.055 ↗
4. M. Chen, M. Shen, S. Zhu, F. Wang, and Y. Niu, Preparation and Thermal Shock Behavior at 1000 °C of a Glass-Alumina-NiCrAlY Tri-Composite Coating on K38G Superalloy, Surf. Coat. Technol., 2012, 206(8-9), p 2566-257110.1016/j.surfcoat.2011.11.015 ↗
5. L. Marot, T. de los Arcos, A.M. Bünzli, C. Wäckerlin, R. Steiner, P. Oelhafen, E. Meyer, D. Mathys, P. Spätig, and G. Covarel, Nanocomposites of Carbon Nanotubes Embedded in a (Ti,Al)N Coated Film, Surf. Coat. Technol., 2012, 212, p 223-22810.1016/j.surfcoat.2012.09.053 ↗
6. Z.Y. Pan, Y. Wang, C.H. Wang, X.G. Sun, and L. Wang, The Effect of SiC Particles on Thermal Shock Behavior of Al2O3/8YSZ Coatings Fabricated by Atmospheric Plasma Spraying, Surf. Coat. Technol., 2012, 206(8-9), p 2484-249810.1016/j.surfcoat.2011.10.055 ↗
7. Y. Zhao, A. Shinmi, X. Zhao, P.J. Withers, S. Van Boxel, N. Markocsan, P. Nylen, and P. Xiao, Investigation of Interfacial Properties of Atmospheric Plasma Sprayed Thermal Barrier Coatings with Four-Point Bending and Computed Tomography Technique, Surf. Coat. Technol., 2012, 206(23), p 4922-492910.1016/j.surfcoat.2012.05.099 ↗
8. L. Hallmann, P. Ulmer, E. Reusser, and C.H.F. Hämmerle, Effect of Blasting Pressure, Abrasive Particle Size and Grade on Phase Transformation and Morphological Change of Dental Zirconia Surface, Surf. Coat. Technol., 2012, 206(19-20), p 4293-430210.1016/j.surfcoat.2012.04.043 ↗
9. E. Bertarelli, D. Carnelli, D. Gastaldi, D. Tonini, F. Di Fonzo, M. Beghi, R. Contro, and P. Vena, Nanomechanical Testing of Alumina-Titanium Functionally Graded Thin Coatings for Orthopaedic Applications, Surf. Coat. Technol., 2011, 205(8-9), p 2838-284510.1016/j.surfcoat.2010.10.053 ↗
10. P. Chraska, J. Dubsky, K. Neufuss, and J. Pisacka, Alumina-Base Plasma-Sprayed Materials Part I: Phase Stability of Alumina and Alumina-Chromia, J. Therm. Spray Technol., 1997, 6(3), p 320-32610.1007/s11666-997-0066-9 ↗
11. K. Yang, X.M. Zhou, H.Y. Zhao, and S.Y. Tao, Microstructure and Mechanical Properties of Al2O3-Cr2O3 Composite Coatings Produced by Atmospheric Plasma Spraying, Surf. Coat. Technol., 2011, 206(6), p 1362-137110.1016/j.surfcoat.2011.08.061 ↗
12. K. Yang, J.W. Feng, X.M. Zhou, and S.Y. Tao, Microstructural Characterization and Strengthening-Toughening Mechanism of Plasma-Sprayed Al2O3-Cr2O3 Composite Coatings, J. Therm. Spray Technol., 2012, 21(5), p 1011-102410.1007/s11666-012-9796-4 ↗
13. S.Y. Tao, Z.J. Yin, X.M. Zhou, and C.X. Ding, Sliding Wear Characteristics of plasma-sprayed Al2O3 and Cr2O3 Coatings Against Copper Alloy Under Severe Conditions, Tribol. Int., 2010, 43(1-2), p 69-7510.1016/j.triboint.2009.04.037 ↗
14. H.-J. Rätzer-Scheibe, U. Schulz, and T. Krell, The Effect of Coating Thickness on the Thermal Conductivity of EB-PVD PYSZ Thermal Barrier Coatings, Surf. Coat. Technol., 2006, 200(18-19), p 5636-564410.1016/j.surfcoat.2005.07.109 ↗
15. C.X. Ding, B.T. Huang, and H.L. Lin, Plasma-Sprayed Wear-Resistant Ceramic and Cermet Coating Materials, Thin Solid Films, 1984, 118(4), p 485-49310.1016/0040-6090(84)90277-3 ↗
16. A.K. Basak, J.P. Celis, M. Vardavoulias, and P. Matteazzi, Effect of Nanostructuring and Al Alloying on Friction and Wear Behaviour of Thermal Sprayed WC-Co Coatings, Surf. Coat. Technol., 2012, 206(16), p 3508-351610.1016/j.surfcoat.2012.02.030 ↗
17. X. Lin, Y. Zeng, C. Ding, and P. Zhang, Tribological Behaviour of Nanostructured Al2O3-3 wt.% TiO2 Coating Against Steel in Dry Sliding, Tribol. Lett., 2004, 17(1), p 19-2610.1023/B:TRIL.0000017414.32058.f7 ↗
18. V. Fervel, B. Normand, and C. Coddet, Tribological Behavior of Plasma Sprayed Al2O3-Based Cermet Coatings, Wear, 1999, 230(1), p 70-7710.1016/S0043-1648(99)00096-4 ↗
19. Z.J. Yin, S.Y. Tao, X.M. Zhou, and C.X. Ding, Tribological Properties of Plasma Sprayed Al/Al2O3 Composite Coatings, Wear, 2007, 263, p 1430-143710.1016/j.wear.2007.01.052 ↗
20. B. Normand, V. Fervel, C. Coddet, and V. Nikitine, Tribological Properties of Plasma Sprayed Alumina-Titania Coatings: Role and Control of the Microstructure, Surf. Coat. Technol., 2000, 123(2-3), p 278-28710.1016/S0257-8972(99)00532-0 ↗