High-Temperature Behavior of a NiCr-Coated T91 Boiler Steel in the Platen Superheater of Coal-Fired Boiler
Source abstract
Abstract
Ni-20Cr coating was deposited on T91 boiler tube steel by high-velocity oxy-fuel (HVOF) process to enhance high-temperature oxidation resistance. High-temperature performance of bare, as well as HVOF-coated steel specimens was evaluated for 1500 h under in the platen superheater zone of coal-fired boiler, where the temperature was around 900 °C. Experiments were carried out for 15 cycles, each of 100-h duration followed by 1-h cooling at ambient temperature. The extent of degradation of the specimens was assessed by the thickness loss and depth of internal corrosion attack. Ni-20Cr-coated steel performed better than the uncoated steel in actual boiler environment. The improved degradation resistance of Ni-20Cr coating can be attributed to the presence of Cr2O3 in the top oxide scale and dense microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. K. Tao, X. Zhou, H. Cui, and J. Zhang, Microhardness Variation in Heat-Treated Conventional and Nanostructured NiCrC Coatings Prepared by HVAF Spraying, Surf. Coat. Technol., 2009, 203, p 1406-141410.1016/j.surfcoat.2008.11.020 ↗
2. O. Xue-mei, S. Zhi, S. Min, and Z. Duan-lian, Hot-Corrosion Mechanism of Ni-Cr Coatings at 650 °C Under Different Simulated Corrosion Conditions, J. China Univ. Min. Technol., 2008, 18, p 0444-044810.1016/S1006-1266(08)60092-9 ↗
3. B.S. Sidhu and S. Prakash, Nickel-Chromium Plasma Spray Coatings: A Way to Enhance Degradation Resistance of Boiler Tube Steels in Boiler Environment, J. Therm. Spray Technol., 2006, 15, p 131-14010.1361/105996306X92695 ↗
4. V.H. Hidalgo, F.J.B. Varela, A.C. Menendez, and S.P. Martınez, A Comparative Study of High-temperature Erosion Wear of Plasma-Sprayed NiCrBSiFe and WC-NiCrBSiFe Coatings Under Simulated Coal-Fired Boiler Conditions, Tribol. Int., 2001, 34, p 161-16910.1016/S0301-679X(00)00146-8 ↗
5. A. Shibli and F. Starr, Some Aspects of Plant and Research Experience in the Use of New High Strength Martensitic Steel P91, Int. J. Press. Vessel Pip., 2007, 84, p 114-12210.1016/j.ijpvp.2006.11.002 ↗
6. M. Torrell, S. Dosta, J.R. Miguel, and J.M. Guilemany, Optimisation of HVOF Thermal Spray Coatings for Their Implementation as MSWI, Superheater Protectors, Corros. Eng. Sci. Technol., 2010, 45, p 84-9310.1179/147842209X12601838533508 ↗
7. B.S. Sidhu and S. Prakash, Studies on the Behaviour of Stellite-6 as Plasma Sprayed and Laser Remelted Coatings in Molten Salt Environment at 900 °C Under Cyclic Conditions, J. Mater. Process. Technol., 2006, 172, p 52-6310.1016/j.jmatprotec.2005.08.018 ↗
8. B.Q. Wang, Hot Erosion Behavior of Two New Iron-Based Coatings Sprayed by HVCC Process, Wear, 2003, 255, p 102-10910.1016/S0043-1648(03)00042-5 ↗
9. N. Bala, H. Singh, and S. Prakash, High Temperature Oxidation Studies of Cold Sprayed Ni-20Cr and Ni-50Cr Coatings on SAE 213-T22 Boiler Steel, Appl. Surf. Sci., 2009, 255, p 6862-686910.1016/j.apsusc.2009.03.006 ↗
10. T. Sundararajan, S. Kuroda, and F. Abe, Steam Oxidation Resistance of Two-Layered Ni-Cr and Al APS Coating for USC Boiler Applications, Corros. Sci., 2005, 47, p 1129-114710.1016/j.corsci.2004.06.023 ↗
11. H.S. Sidhu, B.S. Sidhu, S. Prakash, and S. Prakash, Mechanical and Microstructural Properties of HVOF Sprayed WC-Co and Cr3C2-NiCr Coatings on the Boiler Tube Steels Using LPG as the Fuel Gas, J. Mater. Process. Technol., 2006, 171, p 77-8210.1016/j.jmatprotec.2005.06.058 ↗
12. W. Tillmann, E. Vogli, I. Baumann, G. Kopp, and C. Weihs, Desirability-Based Multi-Criteria Optimization of HVOF Spray Experiments to Manufacture Fine Structured Wear-Resistant 75Cr3C2-25(NiCr20) Coatings, J. Therm. Spray Technol., 2010, 19, p 392-40810.1007/s11666-009-9383-5 ↗
13. R.A. Mahesh, R. Jayaganthan, and S. Prakash, Evaluation of Hot Corrosion Behaviour of HVOF Sprayed NiCrAl Coating on Superalloys at 900 °C, Mater. Chem. Phys., 2008, 111, p 524-53310.1016/j.matchemphys.2008.05.006 ↗
14. J.M. Guilemany, J. Fernandez, J. Delgado, A.V. Benedetti, and F. Climent, Effects of Thickness Coatings on the Electrochemical Behavior of Thermal Spray Cr3C2-NiCr Coatings, Surf. Coat. Technol., 2002, 153, p 107-11310.1016/S0257-8972(01)01679-6 ↗
15. T.S. Sidhu, S. Prakash, and R.D. Agrawal, Studies of the Metallurgical and Mechanical Properties of High Velocity Oxy-Fuel Sprayed Stellite-6 Coatings on Ni- and Fe-Based Superalloys, Surf. Coat. Technol., 2006, 201, p 273-28110.1016/j.surfcoat.2005.11.108 ↗
16. J.M. Guilemany, M. Torrell, and J.R. Miguel, Study of the HVOF Ni-Based Coatings’ Corrosion Resistance Applied on Municipal Solid-Waste Incinerators, J. Therm. Spray Technol., 2008, 17, p 254-26210.1007/s11666-008-9167-3 ↗
17. T.S. Sidhu, S. Prakash, and R.D. Agrawal, Hot Corrosion Studies of HVOF NiCrBSi and Stellite-6 Coatings on a Ni-Based Superalloy in an Actual Industrial Environment of a Coal Fired Boiler, Surf. Coat. Technol., 2006, 201, p 1602-161210.1016/j.surfcoat.2006.02.047 ↗
18. S.S. Chatha, H.S. Sidhu, and B.S. Sidhu, High Temperature Hot Corrosion Behaviour of NiCr and Cr3C2-NiCr Coatings on T91 Boiler Steel in an Aggressive Environment at 750 °C, Surf. Coat. Technol., 2012, 206, p 3839-385010.1016/j.surfcoat.2012.01.060 ↗
19. D. Das, R. Balasubramaniam, and M.N. Mungole, Hot Corrosion of Carbon-Alloyed Fe3Al-Based Iron Aluminides, Mater. Sci. Eng. A, 2002, 338, p 24-3210.1016/S0921-5093(02)00072-2 ↗
20. S. Srikanth, B. Ravikumar, S.K. Das, K. Gopalakrishna, K. Nandakumar, and P. Vijayan, Analysis of Failures in Boiler Tubes Due to Fireside Corrosion in a Waste Heat Recovery Boiler, Eng. Fail. Anal., 2003, 10, p 59-6610.1016/S1350-6307(02)00030-4 ↗
21. U.K. Chatterjee, S.K. Bose, and S.K. Roy, Environmental Degradation of Metals, Marcel Dekker, New York, 200110.1201/9781482292244 ↗
22. G.Y. Lai, High Temperature Corrosion of Engineering Alloys, ASM International, Materials Park, 1990
23. S.E. Sadique, A.H. Mollah, M.S. Islam, M.M. Ali, M.H.H. Megat, and S. Basri, High-Temperature Oxidation Behavior of Iron-Chromium-Aluminum Alloys, Oxid. Met., 2000, 54, p 385-40010.1023/A:1004682316408 ↗
24. A. Ul-Hamid, Diverse Scaling Behavior of the Ni-20Cr Alloy, Mater. Chem. Phys., 2003, 80, p 135-14210.1016/S0254-0584(02)00448-0 ↗
25. S. Sundararajan, S. Kuroda, K. Nishida, T. Itagaki, and F. Abe, Behaviour of Mn and Si in the Spray Powders During Steam Oxidation of Ni-Cr Thermal Spray Coatings, ISIJ Int., 2004, 44, p 139-14410.2355/isijinternational.44.139 ↗
26. M.A. Uusitalo, P.M.J. Vuoristo, and T.A. Mantyla, High Temperature Corrosion of Coatings and Boiler Steels Below Chlorine-Containing Salt Deposits, Corros. Sci., 2004, 46, p 1311-133110.1016/j.corsci.2003.09.026 ↗