Experimental and Numerical Study of the Influence of Substrate Surface Preparation on Adhesion Mechanisms of Aluminum Cold Spray Coatings on 300M Steel Substrates
Source abstract
Abstract
The effect of substrate surface topography on the creation of metallurgical bonds and mechanical anchoring points has been studied for the cold spray deposition of pure aluminum on 300M steel substrate material. The coatings adhesion strength showed a significant decrease from 31.0 ± 5.7 MPa on polished substrates to 6.9 ± 2.0 MPa for substrates with roughness of 2.2 ± 0.5 μm. Strengths in the vicinity of 45 MPa were reached for coatings deposited onto forced pulsed waterjet treated surfaces with roughnesses larger than 33.8 μm. Finite element analysis has confirmed the sole presence of mechanical anchoring in coating adhesion strength for all surface treatment except polished surfaces. Grit embedment has been shown to be non-detrimental to coating adhesion for the current deposited material combination. The particle deformation process during impacts has been studied through finite element analysis using the Preston–Tonks–Wallace (PTW) constitutive model. The obtained equivalent plastic strain (PEEQ), temperature, contact pressure and velocity vector were correlated to the particle ability to form metallurgical bonds. Favorable conditions for metallurgical bonding were found to be highest for particles deposited on polished substrates, as confirmed by fracture surface analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Particle Dynamics in Fluid Flows · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. M. Faccoli, G. Cornacchia, D. Maestrini, G.P. Marconi, and R. Roberti, Cold Spray Repair of Martensitic Stainless Steel Components, J. Therm. Spray Technol., 2014, 23(8), p 1270-128010.1007/s11666-014-0129-7 ↗
2. V. Champagne and D. Helfritch, Critical Assessment 11: Structural Repairs by Cold Spray, Mater. Sci. Technol., 2015, 31(6), p 627-63410.1179/1743284714Y.0000000723 ↗
3. V.K. Champagne, The Repair of Magnesium Rotorcraft Components by Cold Spray, J. Fail. Anal. Prev., 2008, 8(2), p 164-17510.1007/s11668-008-9116-y ↗
4. F. Raletz, M. Vardelle, and G. Ezo’o, Critical Particle Velocity Under Cold Spray Conditions, Surf. Coat. Technol., 2006, 201(5), p 1942-194710.1016/j.surfcoat.2006.04.061 ↗
5. C.-J. Li, W.-Y. Li, and H. Liao, Examination of the Critical Velocity for Deposition of Particles in Cold Spraying, J. Therm. Spray Technol., 2006, 15(2), p 212-22210.1361/105996306X108093 ↗
6. D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, M.F. Smith, and T.J. Roemer, Particle Velocity and Deposition Efficiency in the Cold Spray Process, J. Therm. Spray Technol., 1999, 8(4), p 576-58210.1361/105996399770350278 ↗
7. W.-Y. Li, C. Zhang, C.-J. Li, and H. Liao, Modeling Aspects of High Velocity Impact of Particles in Cold Spraying by Explicit Finite Element Analysis, J. Therm. Spray Technol., 2009, 18(5-6), p 92110.1007/s11666-009-9325-2 ↗
8. T. Schmidt et al., From Particle Acceleration to Impact and Bonding in Cold Spraying, J. Therm. Spray Technol., 2009, 18(5-6), p 79410.1007/s11666-009-9357-7 ↗
9. S. Rahmati and A. Ghaei, The Use of Particle/Substrate Material Models in Simulation of Cold-Gas Dynamic-Spray Process, J. Therm. Spray Technol., 2013, 23(3), p 530-54010.1007/s11666-013-0051-4 ↗
10. D. Zhang, P.H. Shipway, and D.G. McCartney, Cold Gas Dynamic Spraying of Aluminum: The Role of Substrate Characteristics in Deposit Formation, J. Therm. Spray Technol., 2004, 14(1), p 109-11610.1361/10599630522666 ↗
11. T. Hussain, D.G. McCartney, P.H. Shipway, and D. Zhang, Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components, J. Therm. Spray Technol., 2009, 18(3), p 364-37910.1007/s11666-009-9298-1 ↗
12. M. Grujicic, C.L. Zhao, W.S. DeRosset, and D. Helfritch, Adiabatic Shear Instability Based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process, Mater. Des., 2004, 25(8), p 681-68810.1016/j.matdes.2004.03.008 ↗
13. P.C. King, G. Bae, S.H. Zahiri, M. Jahedi, and C. Lee, An Experimental and Finite Element Study of Cold Spray Copper Impact Onto Two Aluminum Substrates, J. Therm. Spray Technol., 2009, 19(3), p 620-63410.1007/s11666-009-9454-7 ↗
14. Y. Cormier, P. Dupuis, B. Jodoin, and A. Ghaei, Finite Element Analysis and Failure Mode Characterization of Pyramidal Fin Arrays Produced by Masked Cold Gas Dynamic Spray, J. Therm. Spray Technol., 2015, 24(8), p 1549-156510.1007/s11666-015-0317-0 ↗
15. W.-Y. Li, H. Liao, C.-J. Li, H.-S. Bang, and C. Coddet, Numerical Simulation of Deformation Behavior of Al Particles Impacting on Al Substrate and Effect of Surface Oxide Films on Interfacial Bonding in Cold Spraying, Appl. Surf. Sci., 2007, 253(11), p 5084-509110.1016/j.apsusc.2006.11.020 ↗
16. W.-Y. Li, C.-J. Li, and G.-J. Yang, Effect of Impact-Induced Melting on Interface Microstructure and Bonding of Cold-Sprayed Zinc Coating, Appl. Surf. Sci., 2010, 257(5), p 1516-152310.1016/j.apsusc.2010.08.089 ↗
17. G. Bae, Y. Xiong, S. Kumar, K. Kang, and C. Lee, General Aspects of Interface Bonding in Kinetic Sprayed Coatings, Acta Mater., 2008, 56(17), p 4858-486810.1016/j.actamat.2008.06.003 ↗
18. M. Grujicic, J.R. Saylor, D.E. Beasley, W.S. DeRosset, and D. Helfritch, Computational Analysis of the Interfacial Bonding Between Feed-Powder Particles and the Substrate in the Cold-Gas Dynamic-Spray Process, Appl. Surf. Sci., 2003, 219(3-4), p 211-22710.1016/S0169-4332(03)00643-3 ↗
19. R.C. Dykhuizen, M.F. Smith, D.L. Gilmore, R.A. Neiser, X. Jiang, and S. Sampath, Impact of High Velocity Cold Spray Particles, J. Therm. Spray Technol., 1999, 8(4), p 559-56410.1361/105996399770350250 ↗
20. X.-J. Ning, J.-H. Jang, H.-J. Kim, C.-J. Li, and C. Lee, Cold Spraying of Al-Sn Binary Alloy: Coating Characteristics and Particle Bonding Features, Surf. Coat. Technol., 2008, 202(9), p 1681-168710.1016/j.surfcoat.2007.07.026 ↗
21. C.-J. Li, W.-Y. Li, and Y.-Y. Wang, Formation of Metastable Phases in Cold-Sprayed Soft Metallic Deposit, Surf. Coat. Technol., 2005, 198(1-3), p 469-47310.1016/j.surfcoat.2004.10.063 ↗
22. J. Wu, H. Fang, H. Kim, and C. Lee, High Speed Impact Behaviors of Al Alloy Particle Onto Mild Steel Substrate During Kinetic Deposition, Mater. Sci. Eng., A, 2006, 416(1-2), p 114-11910.1016/j.msea.2005.11.011 ↗
23. W.-Y. Li, C. Zhang, X. Guo, C.-J. Li, H. Liao, and C. Coddet, Study on Impact Fusion at Particle Interfaces and Its Effect on Coating Microstructure in Cold Spraying, Appl. Surf. Sci., 2007, 254(2), p 517-52610.1016/j.apsusc.2007.06.026 ↗
24. S. Barradas et al., Laser Shock Flier Impact Simulation of Particle-Substrate Interactions in Cold Spray, J. Therm. Spray Technol., 2007, 16(4), p 548-55610.1007/s11666-007-9069-9 ↗
25. D. Goldbaum et al., The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats, J. Therm. Spray Technol., 2012, 21(2), p 288-30310.1007/s11666-011-9720-3 ↗
26. G. Bae et al., Bonding Features and Associated Mechanisms in Kinetic Sprayed Titanium Coatings, Acta Mater., 2009, 57(19), p 5654-566610.1016/j.actamat.2009.07.061 ↗
27. K. Kim, M. Watanabe, and S. Kuroda, Jetting-Out Phenomenon Associated with Bonding of Warm-Sprayed Titanium Particles Onto Steel Substrate, J. Therm. Spray Technol., 2009, 18(4), p 49010.1007/s11666-009-9379-1 ↗
28. W.-Y. Li et al., Significant Influences of Metal Reactivity and Oxide Films at Particle Surfaces on Coating Microstructure in Cold Spraying, Appl. Surf. Sci., 2007, 253(7), p 3557-356210.1016/j.apsusc.2006.07.063 ↗
29. S. Barradas et al., Application of Laser Shock Adhesion Testing to the Study of the Interlamellar Strength and Coating-Substrate Adhesion in Cold-Sprayed Copper Coating of Aluminum, Surf. Coat. Technol., 2005, 197(1), p 18-2710.1016/j.surfcoat.2004.08.222 ↗
30. T. Marrocco, D.G. McCartney, P.H. Shipway, and A.J. Sturgeon, Production of Titanium Deposits by Cold-Gas Dynamic Spray: Numerical Modeling and Experimental Characterization, J. Therm. Spray Technol., 2006, 15(2), p 263-27210.1361/105996306X108219 ↗
31. R. Ghelichi, S. Bagherifard, M. Guagliano, and M. Verani, Numerical Simulation of Cold Spray Coating, Surf. Coat. Technol., 2011, 205, p 5294-530110.1016/j.surfcoat.2011.05.038 ↗
32. R. Ghelichi, S. Bagherifard, D. MacDonald, I. Fernandez-Pariente, B. Jodoin, and M. Guagliano, Experimental and Numerical Study of Residual Stress Evolution in Cold Spray Coating, Appl. Surf. Sci., 2014, 288, p 26-3310.1016/j.apsusc.2013.09.074 ↗
33. K. Yokoyama, M. Watanabe, S. Kuroda, Y. Gotoh, T. Schmidt, and F. Gärtner, Simulation of Solid Particle Impact Behavior for Spray Processes, Mater. Trans., 2006, 47(7), p 1697-170210.2320/matertrans.47.1697 ↗
34. M.M. Sharma, T.J. Eden, and B.T. Golesich, Effect of Surface Preparation on the Microstructure, Adhesion, and Tensile Properties of Cold-Sprayed Aluminum Coatings on AA2024 Substrates, J. Therm. Spray Technol., 2014, 24(3), p 410-42210.1007/s11666-014-0175-1 ↗
35. S. Kumar, G. Bae, and C. Lee, Influence of Substrate Roughness on Bonding Mechanism in Cold Spray, Surf. Coat. Technol., 2016, 304, p 592-60510.1016/j.surfcoat.2016.07.082 ↗
36. P. Richer, B. Jodoin, and L. Ajdelsztajn, Substrate Roughness and Thickness Effects on Cold Spray Nanocrystalline A-Mg Coatings, J. Therm. Spray Technol., 2006, 15(2), p 246-25410.1361/105996306X108174 ↗
37. S. Kumar, G. Bae, and C. Lee, Deposition Characteristics of Copper Particles on Roughened Substrates Through Kinetic Spraying, Appl. Surf. Sci., 2009, 255(6), p 3472-347910.1016/j.apsusc.2008.10.060 ↗
38. T.S. Price, P.H. Shipway, D.G. McCartney, E. Calla, and D. Zhang, A Method for Characterizing the Degree of Inter-Particle Bond Formation in Cold Sprayed Coatings, J. Therm. Spray Technol., 2007, 16(4), p 566-57010.1007/s11666-007-9070-3 ↗
39. M.M. Vijay, A.H. Tieu, W. Yan, and B.R. Daniels, Method and Apparatus for Prepping Surfaces with a High-Frequency Forced Pulsed Waterjet, US8550873 B2, 08 Oct 2013
40. M.M. Vijay, Apparatus and Method for Prepping a Surface Using a Coating Particle Entrained in a Pulsed Waterjet or Airjet, US8389066 B2, 05-Mar-2013
41. T. Samson, D. MacDonald, R. Fernández, and B. Jodoin, Effect of Pulsed Waterjet Surface Preparation on the Adhesion Strength of Cold Gas Dynamic Sprayed Aluminum Coatings, J. Therm. Spray Technol., 2015, 24(6), p 984-99310.1007/s11666-015-0261-z ↗
42. M. Fukumoto et al., Effect of Substrate Temperature on Deposition Behavior of Copper Particles on Substrate Surfaces in the Cold Spray Process, J. Therm. Spray Technol., 2007, 16(5), p 643-65010.1007/s11666-007-9121-9 ↗
43. S. Rech, A. Trentin, S. Vezzu, J.-G. Legoux, E. Irissou, and M. Guagliano, Influence of Pre-Heated Al 6061 Substrate Temperature on the Residual Stresses of Multipass Al Coatings Deposited by Cold Spray, J. Therm. Spray Technol., 2011, 20(1-2), p 243-25110.1007/s11666-010-9596-7 ↗
44. S. Yin, Y. Sun, X. Wang, Z. Guo, and H. Liao, Effect of Spray Angle on Temperature Distribution Within the Metallic Substrate in Cold Spraying, J. Therm. Spray Technol., 2013, 22(6), p 983-99110.1007/s11666-013-9931-x ↗
45. M.P. Dewar, A.G. McDonald, and A.P. Gerlich, Interfacial Heating During Low-Pressure Cold-Gas Dynamic Spraying of Aluminum Coatings, J. Mater. Sci., 2011, 47(1), p 184-19810.1007/s10853-011-5786-z ↗
46. ASTM C633-13, Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings, ASTM International, West Conshohocken, PA, 2017
47. T.H. Van Steenkiste, J.R. Smith, and R.E. Teets, Aluminum Coatings Via Kinetic Spray with Relatively Large Powder Particles, Surf. Coat. Technol., 2002, 154(2-3), p 237-25210.1016/S0257-8972(02)00018-X ↗
48. C. Borchers, F. Gärtner, T. Stoltenhoff, and H. Kreye, Microstructural Bonding Features of Cold Sprayed Face Centered Cubic Metals, J. Appl. Phys., 2004, 96(8), p 4288-429210.1063/1.1789278 ↗
49. T. Stoltenhoff, C. Borchers, F. Gärtner, and H. Kreye, Microstructures and Key Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200(16-17), p 4947-496010.1016/j.surfcoat.2005.05.011 ↗
50. W.-Y. Li, H. Liao, C.-J. Li, G. Li, C. Coddet, and X. Wang, On High Velocity Impact of Micro-Sized Metallic Particles in Cold Spraying, Appl. Surf. Sci., 2006, 253(5), p 2852-286210.1016/j.apsusc.2006.05.126 ↗
51. ASM and A. S. for Metals, ASM Handbook: Volume 18: Friction, Lubrication, and Wear Technology, 10th ed., ASM International, Materials Park, OH, 1992
52. T. Schmidt, F. Gaertner, and H. Kreye, New Developments in Cold Spray Based on Higher Gas and Particle Temperatures, J. Therm. Spray Technol., 2006, 15(4), p 488-49410.1361/105996306X147144 ↗
53. É.I.J.G. Legoux, Effect of Substrate Temperature on the Formation Mechanism of Cold-Sprayed Aluminum, Zinc and Tin Coatings, J. Therm. Spray Technol., 2007, 16(5), p 619-62610.1007/s11666-007-9091-y ↗
54. A. Nastic, Repair of Aluminum Alloy Aerospace Components and Cold Gas Dynamic Spray Flow Distribution Study, Université d’Ottawa/University of Ottawa, Thesis, 2015
55. B. Banerjee, An Evaluation of Plastic Flow Stress Models for the Simulation of High-Temperature and High-Strain-Rate Deformation of Metals, Acta Mater., 2010, 58(20), p 6810-682710.1016/j.actamat.2010.09.009 ↗
56. D.L. Preston, D.L. Tonks, and D.C. Wallace, Model of Plastic Deformation for Extreme Loading Conditions, J. Appl. Phys., 2003, 93(1), p 211-22010.1063/1.1524706 ↗
57. R. Fernández, D. MacDonald, A. Nastić, B. Jodoin, A. Tieu, and M. Vijay, Enhancement and Prediction of Adhesion Strength of Copper Cold Spray Coatings on Steel Substrates for Nuclear Fuel Repository, J. Therm. Spray Technol., 2016, 25(8), p 1577-158710.1007/s11666-016-0467-8 ↗
58. J. Wu, J. Yang, H. Fang, S. Yoon, and C. Lee, The Bond Strength of A-Si Coating on Mild Steel by Kinetic Spraying Deposition, Appl. Surf. Sci., 2006, 252(22), p 7809-781410.1016/j.apsusc.2005.09.015 ↗
59. X. Wang, J.V. Wood, Y. Sui, and H. Lu, Formation of Intermetallic Compound in Iron-Aluminum Alloys, J. Shanghai Univ. Engl. Ed., 1998, 2(4), p 305-31010.1007/s11741-998-0045-5 ↗
60. S. Yin, X. Wang, W. Li, H. Liao, and H. Jie, Deformation Behavior of the Oxide Film on the Surface of Cold Sprayed Powder Particle, Appl. Surf. Sci., 2012, 259, p 294-30010.1016/j.apsusc.2012.07.036 ↗
61. Y. Xie, S. Yin, C. Chen, M.-P. Planche, H. Liao, and R. Lupoi, New Insights Into the Coating/Substrate Interfacial Bonding Mechanism in Cold Spray, Scr. Mater., 2016, 125, p 1-410.1016/j.scriptamat.2016.07.024 ↗
62. X.K. Suo, M. Yu, W.Y. Li, M.P. Planche, and H.L. Liao, Effect of Substrate Preheating on Bonding Strength of Cold-Sprayed Mg Coatings, J. Therm. Spray Technol., 2012, 21(5), p 1091-109810.1007/s11666-012-9803-9 ↗
63. K. Kim, W. Li, and X. Guo, Detection of Oxygen at the Interface and Its Effect on Strain, Stress, and Temperature at the Interface Between Cold Sprayed Aluminum and Steel Substrate, Appl. Surf. Sci., 2015, 357(B), p 1720-172610.1016/j.apsusc.2015.10.022 ↗
64. W.Y. Li, M. Yu, F.F. Wang, S. Yin, and H.L. Liao, A Generalized Critical Velocity Window Based on Material Property for Cold Spraying by Eulerian Method, J. Therm. Spray Technol., 2014, 23(3), p 557-56610.1007/s11666-013-0023-8 ↗
65. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51(15), p 4379-439410.1016/S1359-6454(03)00274-X ↗
66. F. Meng, H. Aydin, S. Yue, and J. Song, The Effects of Contact Conditions on the Onset of Shear Instability in Cold-Spray, J. Therm. Spray Technol., 2015, 24(4), p 711-71910.1007/s11666-015-0229-z ↗
67. S. Guetta et al., Influence of Particle Velocity on Adhesion of Cold-Sprayed Splats, J. Therm. Spray Technol., 2009, 18(3), p 331-34210.1007/s11666-009-9327-0 ↗
68. T. Schmidt, F. Gartner, H. Assadi, and H. Kreye, Development of a Generalized Parameter for Cold Spray Deposition, Acta Mater., 2006, 54, p 729-74210.1016/j.actamat.2005.10.005 ↗
69. P.C. King, C. Busch, T. Kittel-Sherri, M. Jahedi, and S. Gulizia, Interface Melding in Cold Spray Titanium Particle Impact, Surf. Coat. Technol., 2014, 239, p 191-19910.1016/j.surfcoat.2013.11.039 ↗
70. A.D. Kuritsyna, Relation Between Hardness and Resistance to Cold Welding [Antifriction Property] of Metals and Alloys, Met. Sci. Heat Treat. Met., 1959, 1(8), p 29-3210.1007/BF00815757 ↗
71. S. Yin, P. He, H. Liao, and X. Wang, Deposition Features of Ti Coating Using Irregular Powders in Cold Spray, J. Therm. Spray Technol., 2014, 23(6), p 984-99010.1007/s11666-014-0116-z ↗
72. W.-Y. Li, S. Yin, and X.-F. Wang, Numerical Investigations of the Effect of Oblique Impact on Particle Deformation in Cold Spraying by the SPH Method, Appl. Surf. Sci., 2010, 256(12), p 3725-373410.1016/j.apsusc.2010.01.014 ↗
73. G. Li, X. Wang, and W. Li, Effect of Different Incidence Angles on Bonding Performance in Cold Spraying, Trans. Nonferrous Met. Soc. China, 2007, 17(1), p 116-12110.1016/S1003-6326(07)60058-2 ↗
74. F.P. Incropera and D.P. De Witt, Fundamentals of Heat and Mass Transfer, 2nd ed., John Wiley & Sons, Inc., Hoboken, NJ, 1985
75. D. Steinberg, Equation of State and Strength Properties of Selected Materials, Lawrence Livermore National Laboratory, Livermore, CA, 1996
76. M.C. Price, A.T. Kearsley, and M.J. Burchell, Validation of the Preston–Tonks–Wallace Strength Model at Strain Rates Approaching ~1011 s-1 for Al-1100, Tantalum and Copper Using Hypervelocity Impact Crater Morphologies, Int. J. Impact Eng, 2013, 52, p 1-1010.1016/j.ijimpeng.2012.09.001 ↗
77. G.R. Johnson and W.H. Cook, A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures, Proc. 7th Int. Symp. Ballist., 1983, p 541-547
78. M. Fugate et al., Hierarchical Bayesian Analysis and the Preston–Tonks–Wallace Model, Los Alamos Technical Report, LA-UR-05-3935, 2005