Determination of Interfacial Fracture Toughness of Thermal Spray Coatings by Indentation
Source abstract
Abstract
Adhesion is an important and basic property for thermal spray coatings. The standard tensile test method “ISO 14916” is usually used to evaluate the adhesive strength of coatings. On the other hand, the indentation test method has some advantages to evaluate the interfacial fracture toughness as the adhesive strength, arising from the following reasons: the test procedure and the specimen preparation are easy in comparison with the typical testing method. Collaborative research has been conducted by “Committee on Standard Development” in the Japan Thermal Spray Society to establish a standard test method for evaluating interfacial fracture toughness of thermal spray coatings using a conventional Vickers indenter. This article reports the differences among collaborators in round-robin tests performed in this committee and discusses the validity of the test method and test conditions with respect to the test results and finite element analyses. Comparison among collaborators reveals that interfacial fracture toughness can be obtained with a small scattering from the indentation test under constraints found on the basis of the results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. B.R. Lawn, A.G. Evans, and D.B. Marshall, Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System, J. Am. Ceram. Soc., 1980, 63, p 574-58110.1111/j.1151-2916.1980.tb10768.x ↗
2. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall, A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements, J. Am. Ceram. Soc., 1981, 64, p 533-53810.1111/j.1151-2916.1981.tb10320.x ↗
3. K. Niihara, A Fracture Mechanics Analysis of Indentation-Induced Palmqvist Crack in Ceramics, J. Mater. Sci. Lett., 1983, 2, p 221-22310.1007/BF00725625 ↗
4. D.B. Marshall, Controlled Flows in Ceramics: A Comparison of Knoop and Vickers Indentation, J. Am. Ceram. Soc., 1983, 66, p 127-13110.1111/j.1151-2916.1983.tb09989.x ↗
5. K. Shetty, I.G. Wright, P.N. Miner, and A.H. Clauer, Indentation Fracture of WC-Co Cermets, J. Mater. Sci., 1985, 20, p 1873-188210.1007/BF00555296 ↗
6. K. Tanaka, Elastic/Plastic Indentation Hardness and Indentation Fracture Toughness: The Inclusion Core Model, J. Mater. Sci. Lett., 1987, 22, p 1501-150810.1007/BF01233154 ↗
7. C.B. Poton and R.D. Rawlings, Vickers Indentation Fracture Toughness test Part 1: Review of Literature and Formulation of Standardised Toughness Equations, Mater. Sci. Technol., 1989, 5, p 865-87210.1179/026708389790222852 ↗
8. G.A. Gogotsi, S.N. Dub, E.E. Lomonova, and B.I. Ozersky, Vickers and Knoop Indentation Behaviour of Cubic and Partially Stabilized Zirconia Crystals, J. Eur. Ceram. Soc., 1995, 15, p 405-41310.1016/0955-2219(95)91431-M ↗
9. J. Gong, Indentation Toughness of Ceramics: A Statistical Analysis, Ceram. Int., 2002, 28, p 767-77210.1016/S0272-8842(02)00041-X ↗
10. D. Chicot, A. Pertuz, F. Roudet, M.H. Staia, and J. Lesage, New Developments for Fracture Toughness Determination by Vickers Indentation, Mater. Sci. Technol., 2004, 20, p 877-88410.1179/026708304225017427 ↗
11. D. Choulier, Contribution à l’étude de l’adhérence de revêtements projetés à la torche à plasma. Modélisation et utilisation d’un test d’indentation à l’interface, Thèse de doctorat, Université de Technologie de Compiègne, 1989.
12. D. Chicot, P. Dèmarècaux, and J. Lesage, Apparent Interface Toughness of Substrate and Coating Couples from Indentation Test, Thin Solid Films, 1996, 283, p 151-15710.1016/0040-6090(96)08763-9 ↗
13. P. Demarecaux, D. Chicot, and J. Lesage, Interface Indentation Test for the Determination of Adhesive Properties of Thermal Sprayed Coatings, J. Mater. Sci. Lett., 1996, 15, p 1377-138010.1007/BF00275281 ↗
14. J. Lesage and D. Chicot, Models for Hardness and Adhesion of Coatings, Surf. Eng., 1999, 15, p 447-45310.1179/026708499101516821 ↗
15. J. Lesage and D. Chicot, Role of Residual Stress on Interface Toughness of Thermally Sprayed Coatings, Thin Solid Films, 2002, 415, p 143-15010.1016/S0040-6090(02)00488-1 ↗
16. D. Chicot, P. Araujo, N. Horny, A. Tricoteaux, and J. Lesage, Application of the Interfacial Indentation Test for Adhesion Toughness Determination, Surf. Coat. Technol., 2005, 200, p 174-17710.1016/j.surfcoat.2005.02.045 ↗
17. P. Araujo, D. Chicot, M. Staia, and J. Lesage, Residual Stresses and Adhesion of Thermal Spray Coatings, Surf. Eng., 2005, 21, p 1-610.1179/174329405X30020 ↗
18. D. Chicot, G. Marot, P. Araujo, N. Horny, A. Tricoteaux, M.H. Staia, and J. Lesage, Effect of Some Thermal Treatments on Interface Adhesion Toughness of Various Thick Thermal Spray Coatings, Surf. Eng., 2006, 22, p 390-39810.1179/174329406X126690 ↗
19. M. Arai, Interfacial Fracture Toughness Evaluation of Ceramic Thermal Barrier Coatings Based on Indentation Test Method, J. Soc. Mater. Sci. Jpn., 2009, 58, p 917-923 (in Japanese)10.2472/jsms.58.917 ↗
20. M. Arai, Interfacial Fracture Toughness Evaluation of Thermal Barrier Coatings by Indentation Test Method, Proceedings of Asian Pacific Conference for Materials an Mechanics 2009, Yokohama, Japan10.2472/jsms.58.917 ↗
21. A.N. Khan, J. Lu, and H. Liao, Heat Treatment of Thermal Barrier Coatings, Mater. Eng., 2003, A359, p 129-13610.1016/S0921-5093(03)00372-1 ↗
22. Y. Yamazaki, S. Kuga, and T. Yoshida, Evaluation of Interfacial Strength by an Instrumented Indentation Method and Its Application to an Actual TBC Vane, Acta Metall. Sin., 2011, 24, p 109-117
23. Y. Yamazaki and S. Kuga, Interfacial Fracture Toughness Evaluation of Thermal Barrier Coating by Instrumented Indentation Method, Metall. J., 2010, 63, p 194-200
24. R. Dal Maschio, V.M. Sglavo, L. Mattivi, L. Bertamini, and S. Sturlese, Indentation Method for Fracture Resistance Determination of Metal/Ceramic Interface in Thick TBCs, J. Therm. Spray Technol., 1994, 3, p 51-5610.1007/BF02648999 ↗
25. Y. Yamazaki, M. Suzuki, M. Arai, Y. Miyashita, and H. Waki, Current Activities for Standardization on Indentation Method to Evaluate Adhesion Strength of Thermal Spray Coatings in Japan, Proceeding of the ITSC2013 ”International Thermal Spray Conference and Exposition 2013”, May 13, 2013, Republic of Korea, Busan, 201310.31399/asm.cp.itsc2013p0451 ↗
26. Y. Yamazaki, A. Schmidt, and A. Scholz, The Determination of the Delamination Resistance in Thermal Barrier Coatings by Four-Point Bending Tests, Surf. Coat. Technol., 2006, 201, p 744-75410.1016/j.surfcoat.2005.12.023 ↗