Corrosion Mechanism of Plasma-Sprayed Fe-Based Amorphous Coatings with High Corrosion Resistance
Source abstract
Abstract
Fe45Cr16Mo16C18B5 amorphous coatings were deposited on the mild steel substrate (0.45 wt.% C) by plasma spraying, and their corrosion resistance in 3.5 wt.% NaCl solution was compared with those of the substrate and 316 stainless steel. Potentiodynamic tests revealed that the as-prepared coatings had higher resistance to local corrosion than 316 stainless steel due to their wide passivation range. Electrochemical impedance spectroscopy (EIS) measurements further explained the long-term corrosion process of the coatings and indicated their excellent corrosion resistance. Based on this analysis, a schematic diagram of the corrosion mechanism of the coatings was proposed. The obtained results imply that Fe45Cr16Mo16C18B5 amorphous coatings have a promising prospect for industrial applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. A. Kobayashi, S. Yano, H. Kimura, and A. Inoue, Mechanical Property of Fe-Base Metallic Glass Coating Formed by Gas Tunnel Type Plasma Spraying, Surf. Coat. Technol., 2008, 202, p 2513-251810.1016/j.surfcoat.2007.09.011 ↗
2. A. Inoue, X.M. Wang, and W. Zhang, Development and Applications of Bulk Metallic Glasses, Rev. Adv. Mater. Sci., 2008, 18, p 1-9
3. Z. Zhou, L. Wang et al., Formation and corrosion behavior of Fe-based amorphous metallic coatings by HVOF thermal spraying, Surf. Coat. Technol., 2009, 204, p 563-57010.1016/j.surfcoat.2009.08.025 ↗
4. J. Blink, J. Farmer et al., Applications in the Nuclear Industry for Thermal Spray Amorphous Metal and Ceramic Coatings, Metall. Mater. Trans. A, 2009, 40, p 1344-135410.1007/s11661-009-9830-4 ↗
5. B. Shen, A. Inoue, and C. Chang, Superhigh strength and good soft-magnetic properties of (Fe, Co)–B–Si–Nb bulk glassy alloys with high glass-forming ability, Acta Mater., 2004, 52, p 4093-409910.1016/j.actamat.2004.05.022 ↗
6. D.J. Branagan and M. Breitsameter, High-performance nanoscale composite coatings for boiler applications, J. Therm. Spray Technol., 2005, 14, p 196-20410.1361/10599630523755 ↗
7. J. Voyer, Wear-Resistant Amorphous Iron-Based Flame-Sprayed Coatings, J. Them. Spray Technol., 2010, 19, p 1013-102310.1007/s11666-010-9495-y ↗
8. X.Q. Liu, Y.G. Zheng et al., Microstructure and Properties of Fe-Based Amorphous Metallic Coating Produced by High Velocity Axial Plasma Spraying, J. Alloys Compd., 2009, 484, p 300-30710.1016/j.jallcom.2009.04.086 ↗
9. J. Farmer, S. Cheng et al., Iron-Based Amorphous-Metals: High-Performance Corrosion-Resistant Materials (HPCRM) Development Final Report, Metall. Mater. Trans. A, 2009, 40, p 1289-130510.1007/s11661-008-9779-8 ↗
10. J. Farmer, S.D. Day et al., Terahertz Polaritonics, J. Mater. Res., 2007, 22, p 2291-231110.1557/jmr.2007.0291 ↗
11. S. Kumar, C. Lee et al., Phase Dependence of Fe-Based Bulk Metallic Glasses on Properties of Thermal Spray Coatings, J. Alloys Compd., 2009, 475, p 9-1210.1016/j.jallcom.2008.07.064 ↗
12. C. Zhang, R.Q. Guo et al., Influence of the Size of Spraying Powders on the Microstructure and Corrosion Resistance of Fe-Based Amorphous Coating, Electrochim. Acta, 2011, 56, p 6380-638810.1016/j.electacta.2011.05.020 ↗
13. Y. Yang, C. Zhang et al., Effects of Crystallization on the Corrosion Resistance of Fe-Based Amorphous Coatings, Corros. Sci., 2012, 59, p 10-1910.1016/j.corsci.2012.02.003 ↗
14. S.D. Zhang, J. Wu, W.B. Qi et al., Effect of Porosity Defects on the Long-Term Corrosion Behaviour of Fe-Based Amorphous Alloy Coated Mild Steel, Corros. Sci., 2016, 110, p 57-7010.1016/j.corsci.2016.04.021 ↗
15. J.M. Guilemany, N. Espallargas et al., Influence of Spraying Parameters on the Electrochemical Behaviour of HVOF Thermally Sprayed Stainless Steel Coatings in 3.4% NaCl, Surf. Coat. Technol., 2006, 200, p 3064-307210.1016/j.surfcoat.2005.02.116 ↗
16. J. Saaedi, T.W. Coyle et al., Effects of HVOF Process Parameters on the Properties of Ni-Cr Coatings, J. Therm. Spray Technol., 2010, 19, p 521-53010.1007/s11666-009-9464-5 ↗
17. J. Kawakita and S. Kuroda, Corrosion Resistance of HVOF Sprayed HastelloyC Nickel Base Alloy in Seawater, Corros. Sci., 2005, 47, p 2053-206210.1016/j.corsci.2004.08.018 ↗
18. M. Naka, K. Hashimoto, and T. Masumoto, Effect of Addition of Chromium and Molybdenum on the Corrosion Behavior of Amorphous Fe-20B, Co-20B and Ni-20B Alloys, J. Non-Cryst. Solids J., 1979, 34, p 257-26610.1016/0022-3093(79)90040-1 ↗
19. D. Yang, C. Liu et al., Corrosion Behavior of Plasma Sprayed Ceramic and Metallic Coatings on Carbon Steel in Simulated Seawater, Mater. Des., 2013, 52, p 630-63710.1016/j.matdes.2013.06.002 ↗