journal article·2013-10

Isothermal Oxidation Behavior of Supersonic Atmospheric Plasma-Sprayed Thermal Barrier Coating System

Yu Bai, Chunhua Ding, Hongqiang Li, Zhihai Han, Bingjun Ding, Tiejun Wang, Lie Yu

Publisher page

Abstract

In this work, Y2O3 stabilized zirconia-based thermal barrier coatings (TBCs) were deposited by conventional atmospheric plasma spraying (APS) and high efficiency supersonic atmospheric plasma spraying (SAPS), respectively. The effect of Al2O3 layer stability on the isothermal growth behavior of thermally grown oxides (TGOs) was studied. The results revealed that the Al2O3 layer experienced a three-stage change process, i.e., (1) instantaneous growth stage, (2) steady-state growth stage, and (3) depletion stage. The thickness of Al2O3 scale was proved to be an important factor for the growth rate of TGOs. The SAPS-TBCs exhibited a higher Al2O3 stability and better oxidation resistance as compared with the APS-TBCs. Additionally, it was found that inner oxides, especially nucleated on the top of the crest, continually grew and swallowed the previously formed Al2O3 layer, leading to the granulation and disappearance of continuous Al2O3 scale, which was finally replaced by the mixed oxides and spinel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296, p 280-28410.1126/science.1068609 ↗
2. D. Stöver and C. Funke, Directions of The Development of Thermal Barrier Coatings in Energy Applications, J. Mater. Process. Technol., 1999, 92-93, p 195-20210.1016/S0924-0136(99)00244-7 ↗
3. G. Johner and K.K. Schweitzer, Thermal Barrier Coatings for Jet Engine Improvement, Thin Solid Films, 1984, 119, p 301-31510.1016/0040-6090(84)90014-2 ↗
4. G.M. Ingo and T. De Caro, Chemical Aspects of Plasma Spraying of Zirconia-Based Thermal Barrier Coatings, Acta Mater., 2008, 56, p 5177-518710.1016/j.actamat.2008.07.006 ↗
5. T.S. Hille, T.J. Nijdam, A.S.J. Suiker, S. Turteltaub, and W.G. Sloof, Damage Growth Triggered by Interface Irregularities in Thermal Barrier Coatings, Acta Mater., 2009, 57, p 2624-263010.1016/j.actamat.2009.01.022 ↗
6. W.R. Chen, X. Wu, B.R. Marple, and P.C. Patnaik, The Growth and Influence of Thermally Grown Oxide in a Thermal Barrier Coating, Surf. Coat. Technol., 2006, 201, p 1074-107910.1016/j.surfcoat.2006.01.023 ↗
7. W.R. Chen, X. Wu, B.R. Marple, R.S. Lima, and P.C. Patnaik, Pre-Oxidation and TGO Growth Behaviour of an Air-Plasma-Sprayed Thermal Barrier Coating, Surf. Coat. Technol., 2008, 202, p 3787-379610.1016/j.surfcoat.2008.01.021 ↗
8. M. Subanovic, P. Song, E. Wessel, R. Vassen, D. Naumenko, L. Singheiser, and W.J. Quadakkers, Effect of Exposure Conditions on the Oxidation of Mcraly-Bondcoats and Lifetime of Thermal Barrier Coatings, Surf. Coat Technol., 2009, 204, p 820-82310.1016/j.surfcoat.2009.09.056 ↗
9. F. Cao, B. Tryon, C.J. Torbet, and T.M. Pollock, Microstructural Evolution and Failure Characteristics of a NiCoCrAlY Bond Coat in “Hot Spot” Cyclic Oxidation, Acta Mater., 2009, 57, p 3885-389410.1016/j.actamat.2009.04.039 ↗
10. E.A.G. Shillington and D.R. Clarke, Spalling Failure of a Thermal Barrier Coating Associated with Aluminium Depletion in the Bond-Coat, Acta Mater., 1999, 47, p 1297-130510.1016/S1359-6454(98)00407-8 ↗
11. C.H. Lee, H.K. Kim, H.S. Choi, and H.S. Ahn, Phase Transformation and Bond Coat Oxidation Behavior of Plasma-Sprayed Zirconia Thermal Barrier Coating, Surf. Coat. Technol., 2000, 124, p 1-1210.1016/S0257-8972(99)00517-4 ↗
12. D. Stöver and C. Funke, Observations and Analyses of Failure Mechanisms in Thermal Barrier System with Two Phase Bond Coats Based on NiCoCrAlY, Acta Mater., 2004, 52, p 1439-145010.1016/j.actamat.2003.11.025 ↗
13. T.J. Nijdam, G.H. Marijnissen, E. Vergeldt, A.B. Kloosterman, and W.G. Sloof, Development of a Pre-Oxidation Treatment to Improve the Adhesion Between Thermal Barrier Coatings and NiCoCrAlY Bond Coatings, Oxid. Met., 2006, 66, p 269-29410.1007/s11085-006-9036-8 ↗
14. D. Renusch, M. Schorr, and M. Schütze, The Role That Bond Coat Depletion of Aluminum Has on the Lifetime of APS-TBC Under Oxidizing Conditions, Mater. Corros, 2008, 59, p 547-55510.1002/maco.200804137 ↗
15. M.H. Li, X.F. Sun, W.Y. Hu, and H.R. Guan, Thermocyclic Behavior of Sputtered NiCrAlY/EB-PVD 7 wt.% Y2O3-ZrO2 Thermal Barrier Coatings, Surf. Coat. Technol., 2006, 200, p 3770-377410.1016/j.surfcoat.2004.12.014 ↗
16. V.K. Tolpygo and D.R. Clarke, Surface Rumpling of a (Ni, Pt)Al Bond Coat Induced by Cyclic Oxidation, Acta Mater., 2000, 48, p 3283-329310.1016/S1359-6454(00)00156-7 ↗
17. T.J. Nijdam, L.P.H. Jeurgens, and W.G. Sloof, Promoting Exclusive α-Al2O3 Growth upon High-temperature Oxidation of NiCrAl Alloys: Experiment Versus Model Predictions, Acta Mater., 2005, 53, p 1643-165310.1016/j.actamat.2004.12.014 ↗
18. Z.J. Yin, S.Y. Tao, X.M. Zhou, and C.X. Ding, Particle In-Flight Behavior and Its Influence on the Microstructure and Mechanical Properties Of Plasma-Sprayed Al2O3 Coatings, J. Eur. Ceram. Soc., 2008, 28, p 1143-114810.1016/j.jeurceramsoc.2007.09.050 ↗
19. P. Fauchais, G. Montavon, M. Vardelle, and J. Cedelle, Developments in Direct Current Plasma Spraying, Surf. Coat. Technol., 2006, 201, p 1908-192110.1016/j.surfcoat.2006.04.033 ↗
20. Y. Bai, Z.H. Han, H.Q. Li, C. Xu, Y.L. Xu, C.H. Ding, and J.F. Yang, Structure-Property Differences Between Supersonic and Conventional Atmospheric Plasma Sprayed Zirconia Thermal Barrier Coatings, Surf. Coat. Technol., 2011, 205, p 3833-383910.1016/j.surfcoat.2011.01.056 ↗
21. A.C. Fox and T.W. Clyne, Oxygen Transport by Gas Permeation Through the Zirconia Layer in Plasma Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 2004, 184, p 311-32110.1016/j.surfcoat.2003.10.018 ↗
22. F.H. Yuan, Z.X. Chen, Z.W. Huang, Z.G. Wang, and S.J. Zhu, Oxidation Behavior of Thermal Barrier Coatings with HVOF and Detonation-Sprayed NiCrAlY Bondcoats, Corros. Sci., 2008, 50, p 1608-161710.1016/j.corsci.2008.02.002 ↗
23. U. Schulz, M. Menzebach, C. Leyens, and Y.Q. Yang, Influence of Substrate Material on Oxidation Behavior and Cyclic Lifetime of EB-PVD TBC Systems, Surf. Coat. Technol., 2001, 146-147, p 117-12310.1016/S0257-8972(01)01481-5 ↗
24. J. Adler, Ceramic Diesel Particulate Filters, Int. J Appl. Ceram. Technol., 2005, 2, p 429-43910.1111/j.1744-7402.2005.02044.x ↗
25. H.B. Guo, S.K. Gong, C.G. Zhou, and H.B. Xu, Investigation on Hot-Fatigue Behaviors of Gradient Thermal Barrier Coatings by EB-PVD, Surf. Coat. Technol., 2001, 148, p 110-11610.1016/S0257-8972(01)01347-0 ↗
26. Z.M. Li, S.Q. Qian, W. Wang, and J.H. Liu, Microstructure and Oxidation Resistance of Magnetron-Sputtered Nanocrystalline NiCoCrAlY Coatings on Nickel-Based Superalloy, J. Alloy. Compd., 2010, 505, p 675-67910.1016/j.jallcom.2010.06.112 ↗
27. L. Ajdelsztajn, J.A. Picas, G.E. Kim, F.L. Bastian, J. Schoenung, and V. Provenzano, Oxidation Behavior of HVOF Sprayed Nanacrystalline NiCrAlY Powder, Mater. Sci. Eng. A, 2002, 338, p 33-4310.1016/S0921-5093(02)00008-4 ↗
28. P. Saltykov, O. Fabrichnaya, J. Golczewski, and F. Aldinger, Thermodynamic Modeling of Oxidation of Al-Cr-Ni Alloys, J. Alloy. Compd., 2004, 381, p 99-11310.1016/j.jallcom.2004.02.053 ↗
29. P. Niranatlumpong, C.B. Ponton, and H.E. Evans, The Failure of Protective Oxides on Plasma-sprayed NiCrAlY Overlay Coatings, Oxid. Met., 2000, 53, p 241-25810.1023/A:1004549219013 ↗
30. W.H. Tuan, H.H. Wu, and R.Z. Chen, Effect of Sintering Atmosphere on the Mechanical Properties of Ni/Al2O3 Composites, J. Eur. Ceram. Soc., 1997, 17, p 735-74110.1016/S0955-2219(96)00083-0 ↗
31. M. Daroonparvar, M.A.M. Yajid, N.M. Yusof, M.S. Hussain, and H.R. Bakhsheshi-Rad, Formation of a dense and continuous Al2O3 layer in nano thermal barrier coating systems for the suppression of spinel growth on the Al2O3 oxide scale during oxidation, J. Alloy. Compd., 2013, 571, p 205-22010.1016/j.jallcom.2013.03.168 ↗
32. H. Hu, H.J. Gao, and F. Liu, Theory of Directed Nucleation of Strained Islands on Patterned Substrates, Phys. Rev. Lett., 2008, 101, p 216102(1)-216102(4)