journal article·2010-12

Mechanical Properties of LaTi2Al9O19 and Thermal Cycling Behaviors of Plasma-Sprayed LaTi2Al9O19/YSZ Thermal Barrier Coatings

X. Y. Xie, H. B. Guo, S. K. Gong

Publisher page

Abstract

Recently, extensive efforts have been made to develop new thermal barrier coating (TBC) materials which can operate at temperatures above 1523 K over a long term. In this article, LaTi2Al9O19 (LTA) was synthesized by solid-state reaction at 1773 K, and the mechanical properties of the LTA bulk were evaluated. The microhardness is about 14 GPa, comparable to that of YSZ bulk, whereas the Young’s modulus is about 44 GPa, lower than the value of YSZ. However, the fracture toughness of 0.8-1 MPa m1/2 is much lower than that of bulk YSZ. A double-ceramic-layer LTA/YSZ TBC structure was proposed and the TBC sprayed by plasma spraying. Thermal cycling tests of the TBC specimens were performed at 1373 K with a dwell time of 10 min. The LTA remained good stability with ZrO2 and Al2O3. However, the single layer LTA TBC was cracked at the LTA/bond coat interface after about 300 cycles, due to its poor thermal shock resistance, while the YSZ TBC yielded a lifetime of about 1000 cycles. The LTA/YSZ TBC remained intact even after 3000 cycles, exhibiting a promising potential as new TBC materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. R. Taylor, J.R. Brandon, and P. Morrell, Microstructure Composition and Property Relationships of Plasma-Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 1992, 50(2), p 141-14910.1016/0257-8972(92)90055-F ↗
2. R.A. Miller, Current Status of Thermal Barrier Coatings—An Overview, Surf. Coat. Technol., 1987, 30(1), p 1-1110.1016/0257-8972(87)90003-X ↗
3. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296, p 280-28410.1126/science.1068609 ↗
4. W.A. Nelson and R.M. Orenstein, TBC Experience in Land-Based Gas Turbines, J. Therm. Spray Technol., 1997, 6(2), p 176-18010.1007/s11666-997-0009-5 ↗
5. S. Stecura, Optimization of the Ni-Cr-Al-Y/ZrO2-Y2O3 Thermal Barrier System, Adv. Ceram. Mater., 1986, 1(1), p 68-76
6. S. Bose and J. DeMasi-Marcin, Thermal Barrier Coating Experience in Gas Turbine Engines at Pratt & Whitney, J. Therm. Spray Technol., 1997, 6(1), p 99-10410.1007/BF02646318 ↗
7. F. Cernuschi, P. Bianchi, M. Leoni, and P. Scardi, Thermal Diffusivity/Microstructure Relationship in Y-PSZ Thermal Barrier Coatings, J. Therm. Spray Technol., 1999, 8(1), p 102-10910.1361/105996399770350629 ↗
8. J. Ilavsky and J.K. Stalick, Phase Composition and Its Changes During Annealing of Plasma-Sprayed YSZ, Surf. Coat. Technol., 2000, 127(2-3), p 120-12910.1016/S0257-8972(00)00562-4 ↗
9. U. Schulz, Phase Transformation in EB-PVD Yttria Partially Stabilized Zirconia Thermal Barrier Coatings During Annealing, J. Am. Ceram. Soc., 2000, 83(4), p 904-91010.1111/j.1151-2916.2000.tb01292.x ↗
10. M. Matsumoto, N. Yamaguchi, and H. Matsubara, Low Thermal Conductivity and High Temperature Stability of ZrO2-Y2O3-La2O3 Coatings Produced by Electron Beam PVD, Scr. Mater., 2004, 50, p 867-87110.1016/j.scriptamat.2003.12.008 ↗
11. M.N. Rahaman, J.R. Gross, R.E. Dutton, and H. Wang, Phase Stability, Sintering, and Thermal Conductivity of Plasma-Sprayed ZrO2-Gd2O3 Compositions for Potential Thermal Barrier Coating Applications, Acta Mater., 2006, 54(6), p 1615-162110.1016/j.actamat.2005.11.033 ↗
12. R. Vassen, X. Cao, F. Tietz, D. Basu, and D. Stöver, Zirconates as New Materials for Thermal Barrier Coatings, J. Am. Ceram. Soc., 2000, 83(8), p 2023-202810.1111/j.1151-2916.2000.tb01506.x ↗
13. X. Cao, R. Vassen, W. Fischer, F. Tietz, W. Jungen, and D. Stöver, Lanthanum-Cerium Oxide as a Thermal Barrier-Coating Material for High-Temperature Applications, Adv. Mater., 2003, 17, p 1438-144210.1002/adma.200304132 ↗
14. C. Friedrich, R. Gadow, and T. Schirmer, Lanthanum Hexaaluminate—A New Material for Atmospheric Plasma Spraying of Advanced Thermal Barrier Coatings, J. Therm. Spray Technol., 2001, 10, p 592-59810.1361/105996301770349105 ↗
15. H. Lehmann, D. Pitzer, G. Pracht, R. Vaßen, and D. Stöver, Thermal Conductivity and Thermal Expansion Coefficients of the Lanthanum Rare-Earth-Element Zirconate System, J. Am. Ceram. Soc., 2003, 86(8), p 1338-134410.1111/j.1151-2916.2003.tb03473.x ↗
16. Y. Wang, H.B. Guo, and S.K. Gong, Thermal Shock Resistance and Mechanical Properties of La2Ce2O7 Thermal Barrier Coatings with Segmented Structure, J. Therm. Spray Technol., 2009, 35(7), p 2639-2644
17. R. Vaßen and D. Stöver, New Thermal Barrier Coatings Based on Pyrochlore/YSZ Double Layer System, Int. J. Appl. Ceram. Technol., 2005, 1, p 351-36110.1111/j.1744-7402.2004.tb00186.x ↗
18. W. Ma, S.K. Gong, H.F. Li, and H.B. Xu, Novel Thermal Barrier Coatings Based on La2Ce2O7/8YSZ Double-Ceramic-Layer Systems Deposited by Electron Beam Physical Vapor Deposition, Surf. Coat. Technol., 2008, 202, p 2704-270810.1016/j.surfcoat.2007.09.047 ↗
19. H.B. Guo, X.Y. Xie, H.B. Xu, and S.K. Gong, Manufacturing of Thermal Barrier Coating with Column Structure Ceramic Layer, China Patent No. ZL200710118236.5, 16 Sept 2009
20. S.K. Gong, X.Y. Xie, H.B. Guo, and H.B. Xu, Synthesis of LaTi2Al9O19 by Sol-gel Method, China Patent No. ZL200810101373.2, 2 Jun 2010
21. H.B. Xu, X.Y. Xie, H.B. Guo, and S.K. Gong, Synthesis of LaTi2Al9O19 by Co-precipitation Method, China Patent No. ZL200810101374.7, 22 Jan 2010
22. D.B. Marshall, T. Noma, and A.G. Evans, A Simple Method for Determining Elastic-Modulus-to-Hardness Ratio using Knoop Indentation Measurements, J. Am. Ceram. Soc., 1982, 65(10), p c175-c17610.1111/j.1151-2916.1982.tb10357.x ↗
23. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall, A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: 1. Direct Crack Measurements, J. Am. Ceram. Soc., 1981, 64(9), p 533-53810.1111/j.1151-2916.1981.tb10320.x ↗
24. T.K. Gupta, Role of Stress-Induced Phase Transformation in Enhancing Strength and Toughness of in Zirconia Ceramics, Fracture Mechanics of Ceramics, Vol 4, R.C. Bradt, D.P.H. Hasselman, and F.F. Lange, Ed., Plenum Press, 1977, p 877-88910.1007/978-1-4615-7020-2_21 ↗
25. G.K. Beshish, C.W. Florey, F.J. Worzala, and W.J. Lenling, Fracture Toughness of Thermal Spray Ceramic Coatings Determined by the Indentation Technique, J. Therm. Spray Technol., 1993, 2(1), p 35-3810.1007/BF02647421 ↗
26. Y. Zhang, Q. Li, X. Ma, and X. Cao, Synthesis and High-pressure Sintering of Lanthanum Magnesium Hexaaluminate, Mater. Lett., 2008, 62, p 923-92510.1016/j.matlet.2007.07.039 ↗
27. Z. Xu, L. He, R. Mu, X. Zhong, Y. Zhang, J. Zhang, and X. Cao, Double-Ceramic-Layer Thermal Barrier Coatings of La2Zr2O7/YSZ Deposited by Electron Beam-Physical Vapor Deposition, J. Alloy Compd., 2009, 473, p 509-51510.1016/j.jallcom.2008.06.064 ↗
28. R. Vaßen, X. Cao, and D. Stöver, Improvement of New Thermal Barrier Coating Systems Using a Layered or Graded Structure, Ceram. Eng. Sci. Proc., 2001, 22(4), p 435-442
29. C. Mercer, J.R. Williams, D.R. Clarke, and A.G. Evans, On a Ferroelastic Mechanism Governing the Toughness of Metastable Tetragonal-Prime (t′) Yttria-Stabilized Zirconia, Proc. R. Soc., 2007, 463, p 1393-140810.1098/rspa.2007.1829 ↗
30. A. Rabiei and A.G. Evans, Failure Mechanisms Associated with the Thermally Grown Oxide in Plasma-Sprayed Thermal Barrier Coatings, Acta Mater., 2000, 48(15), p 3963-397610.1016/S1359-6454(00)00171-3 ↗