journal article·2022-04Open access

Assessment of CrFeCoNi and AlCrFeCoNi High-Entropy Alloys as Bond Coats for Thermal Barrier Coatings

M. Ossiansson, M. Gupta, M. Löbel, T. Lindner, T. Lampke, S. Joshi

Abstract

Abstract High-entropy alloys (HEAs) represent a relatively new group of multicomponent alloys that have shown great potential for applications requiring tribological and oxidation resistant properties. Consequently, thermally sprayed coatings of different HEA chemistries have received increasing research attention. In this paper, atomized equimolar CrFeCoNi and AlCrFeCoNi feedstocks were used for high velocity air-fuel spraying (HVAF) to produce overlay coatings using two different nozzle configurations. The microstructure, phase constitution and hardness of the coatings were analyzed along with the primary aim of testing the coatings for their oxidation behavior. The performance of the two HEA chemistries was compared with two commercial MCrAlY coatings that are well-established bond coat materials for thermal barrier coatings (TBCs). An investigation was conducted to test the coatings’ performance as bond coats by applying suspension plasma sprayed yttria-stabilized zirconia top coats and evaluating the thermal cycling behavior of the TBCs. The AlCrFeCoNi-coating was found to demonstrate a lower oxidation rate than the CrFeCoNi-coating. However, the AlCrFeCoNi-coating was found to form more rapid oxide scales compared with the commercial bond coat material that also contained reactive elements.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. N.P. Padture, M. Gell and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296(5566), p 280-284.10.1126/science.1068609 ↗
2. R.A. Miller, Thermal Barrier Coatings for Aircraft Engines: History and Directions, JTST, 1997, 6(1), p 35-42.10.1007/BF02646310 ↗
3. S. Mahade, R. Li, N. Curry, S. Björklund, N. Markocsan and P. Nylén, Isothermal Oxidation Behavior of Gd 2 Zr 2 O 7 /YSZ Multilayered Thermal Barrier Coatings, Int. J. Appl. Ceram. Technol., 2016, 13(3), p 443-450.10.1111/ijac.12527 ↗
4. N. Curry, K. VanEvery, T. Snyder and N. Markocsan, Thermal Conductivity Analysis and Lifetime Testing of Suspension Plasma-Sprayed Thermal Barrier Coatings, Coatings, 2014, 4(3), p 630-650.10.3390/coatings4030630 ↗
5. A. Feuerstein, J. Knapp, T. Taylor, A. Ashary, A. Bolcavage and N. Hitchman, Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A Review, J Therm Spray Tech, 2008, 17(2), p 199-213.10.1007/s11666-007-9148-y ↗
6. H.-J. Jang, D.-H. Park, Y.-G. Jung, J.-C. Jang, S.-C. Choi and U. Paik, Mechanical Characterization and Thermal Behavior of HVOF-Sprayed Bond Coat in Thermal Barrier Coatings (TBCs), Surf. Coat. Technol., 2006, 200(14-15), p 4355-4362.10.1016/j.surfcoat.2005.02.170 ↗
7. G.-J. Yang, X.-D. Xiang, L.-K. Xing, D.-J. Li, C.-J. Li and C.-X. Li, Isothermal Oxidation Behavior of NiCoCrAlTaY Coating Deposited by High Velocity Air-Fuel Spraying, J Therm Spray Tech, 2012, 21(3-4), p 391-399.10.1007/s11666-012-9740-7 ↗
8. D.L.-M. Berger and D.S. Matthews, Potenzial von HVAF-Spritzprozessen Potential of HVAF Spray Processes, n.d., p 5.
9. M. Löbel, T. Lindner, T. Mehner, L.-M. Rymer, T. Lampke, S. Björklund, and S. Joshi, Microstructure and Corrosion Properties of AlCrFeCoNi High-Entropy Alloy Coatings Prepared by HVAF and HVOF, n.d., p 6.
10. J. Lu, H. Zhang, Y. Chen, X. Zhao, F. Guo and P. Xiao, Effect of Microstructure of a NiCoCrAlY Coating Fabricated by High-Velocity Air Fuel on the Isothermal Oxidation, Corros. Sci., 2019, 159, p 108126.10.1016/j.corsci.2019.108126 ↗
11. F. Tang, L. Ajdelsztajn, G.E. Kim, V. Provenzano and J.M. Schoenung, Effects of Surface Oxidation during HVOF Processing on the Primary Stage Oxidation of a CoNiCrAlY Coating, Surf. Coat. Technol., 2004, 185(2-3), p 228-233.10.1016/j.surfcoat.2003.11.020 ↗
12. C.T. Sims, N.S. Stoloff and W.C. Hagel, Protective Coatings, Superalloys II, Wiley, New York, 1987.
13. C.T. Sims, N.S. Stoloff and W.C. Hagel, High-Temperature Oxidation, Superalloys II, Wiley, New York, 1987.
14. B.A. Pint, Experimental Observations in Support of the Dynamic-Segregation Theory to Explain the Reactive-Element Effect, Oxid Met, 1996, 45(1-2), p 1-37.10.1007/BF01046818 ↗
15. F.A. Golightly, F.H. Stott and G.C. Wood, The Influence of Yttrium Additions on the Oxide-Scale Adhesion to an Iron-Chromium-Aluminum Alloy, Oxid Met, 1976, 10(3), p 163-187.10.1007/BF00612158 ↗
16. J.-W. Yeh, Alloy Design Strategies and Future Trends in High-Entropy Alloys, JOM, 2013, 65(12), p 1759-1771.10.1007/s11837-013-0761-6 ↗
17. J.-W. Yeh, S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, T.-T. Shun, C.-H. Tsau and S.-Y. Chang, Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes, Adv. Eng. Mater., 2004, 6(5), p 299-303.10.1002/adem.200300567 ↗
18. P.-K. Huang, J.-W. Yeh, T.-T. Shun and S.-K. Chen, Multi-Principal-Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray Coating, Adv. Eng. Mater., 2004, 6(12), p 74-78.10.1002/adem.200300507 ↗
19. A. Meghwal, A. Anupam, B.S. Murty, C.C. Berndt, R.S. Kottada and A.S.M. Ang, Thermal Spray High-Entropy Alloy Coatings: A Review, J. Therm. Spray Tech., 2020, 29(5), p 857-893.10.1007/s11666-020-01047-0 ↗
20. D. Lin, N. Zhang, B. He, B. Jin, Y. Zhang, D. Li and F. Dong, Influence of Laser Re-Melting and Vacuum Heat Treatment on Plasma-Sprayed FeCoCrNiAl Alloy Coatings, J. Iron Steel Res. Int., 2017, 24(12), p 1199-1205.10.1016/S1006-706X(18)30018-9 ↗
21. K.-C. Cheng, J.-H. Chen, S. Stadler and S.-H. Chen, Properties of Atomized AlCoCrFeNi High-Entropy Alloy Powders and Their Phase-Adjustable Coatings Prepared via Plasma Spray Process, Appl. Surf. Sci., 2019, 478, p 478-486.10.1016/j.apsusc.2019.01.203 ↗
22. M. Srivastava, M. Jadhav, R.P.S. Chethan, C.M. Muniprakash and S. Singh, Synthesis and Properties of High Velocity Oxy-Fuel Sprayed FeCoCrNi2Al High Entropy Alloy Coating, Surf. Coat. Technol., 2019, 378, p 124950.10.1016/j.surfcoat.2019.124950 ↗
23. L. Wang, F. Zhang, S. Yan, G. Yu, J. Chen, J. He and F. Yin, Microstructure Evolution and Mechanical Properties of Atmosphere Plasma Sprayed AlCoCrFeNi High-Entropy Alloy Coatings Under Post-Annealing, J. Alloys Compd., 2021, 872, p 159607.10.1016/j.jallcom.2021.159607 ↗
24. A. Meghwal, A. Anupam, V. Luzin, C. Schulz, C. Hall, B.S. Murty, R.S. Kottada, C.C. Berndt and A.S.M. Ang, Multiscale Mechanical Performance and Corrosion Behaviour of Plasma Sprayed AlCoCrFeNi High-Entropy Alloy Coatings, J. Alloys Compd., 2021, 854, p 157140.10.1016/j.jallcom.2020.157140 ↗
25. A.S.M. Ang, C.C. Berndt, M.L. Sesso, A. Anupam, P.S.R.S. Kottada and B.S. Murty, Plasma-Sprayed High Entropy Alloys: Microstructure and Properties of AlCoCrFeNi and MnCoCrFeNi, Metall. Mat. Trans. A, 2015, 46(2), p 791-800.10.1007/s11661-014-2644-z ↗
26. Y. Qiu, S. Thomas, M.A. Gibson, H.L. Fraser and N. Birbilis, Corrosion of High Entropy Alloys, npj Mater Degrad., 2017, 1(1), p 15.10.1038/s41529-017-0009-y ↗
27. K. Yamanaka, H. Shiratori, M. Mori, K. Omura, T. Fujieda, K. Kuwabara and A. Chiba, Corrosion Mechanism of an Equimolar AlCoCrFeNi High-Entropy Alloy Additively Manufactured by Electron Beam Melting, npj Mater Degrad., 2020, 4(1), p 24.10.1038/s41529-020-00127-4 ↗
28. X. Ma, P. Ruggiero, R. Bhattacharya, O.N. Senkov and A.K. Rai, Evaluation of New High Entropy Alloy as Thermal Sprayed Bondcoat in Thermal Barrier Coatings, J. Therm. Spray Tech., 2021 https://doi.org/10.1007/s11666-021-01279-810.1007/s11666-021-01279-8 ↗
29. W.L. Hsu, H. Murakami, H. Araki, M. Watanabe, S. Kuroda, A.C. Yeh and J.W. Yeh, A Study of NiCo 0.6 Fe 0.2 Cr x SiAlTi y High-Entropy Alloys for Applications as a High-Temperature Protective Coating and a Bond Coat in Thermal Barrier Coating Systems, J. Electrochem. Soc., 2018, 165(9), p C524-C531.10.1149/2.1191809jes ↗
30. T. Ru, Spray Parameters Influence on Suspension Plasma Sprayed Zirconia Coatings Properties, n.d., p 31.
31. E04 Committee, “Guide for Metallographic Preparation of Thermal Sprayed Coatings,” ASTM International, n.d., Doi: https://doi.org/10.1520/E1920-03R14.10.1520/E1920-03R14 ↗
32. E04 Committee, “Test Method for Microindentation Hardness of Materials,” ASTM International, n.d., Doi: https://doi.org/10.1520/E0384-17.10.1520/E0384-17 ↗
33. M. Gupta, N. Markocsan, X.-H. Li and R.L. Peng, Improving the Lifetime of Suspension Plasma Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 2017, 332, p 550-559.10.1016/j.surfcoat.2017.07.078 ↗
34. M. Gupta, N. Markocsan, X.-H. Li and L. Östergren, Influence of Bondcoat Spray Process on Lifetime of Suspension Plasma-Sprayed Thermal Barrier Coatings, J. Therm. Spray Tech., 2018, 27(1-2), p 84-97.10.1007/s11666-017-0672-0 ↗
35. N. Curry, Z. Tang, N. Markocsan and P. Nylén, Influence of Bond Coat Surface Roughness on the Structure of Axial Suspension Plasma Spray Thermal Barrier Coatings — Thermal and Lifetime Performance, Surf. Coat. Technol., 2015, 268, p 15-23.10.1016/j.surfcoat.2014.08.067 ↗
36. K. VanEvery, M.J.M. Krane, R.W. Trice, H. Wang, W. Porter, M. Besser, D. Sordelet, J. Ilavsky and J. Almer, Column Formation in Suspension Plasma-Sprayed Coatings and Resultant Thermal Properties, J Therm Spray Tech, 2011, 20(4), p 817-828.10.1007/s11666-011-9632-2 ↗
37. K. Torkashvand, M. Gupta, S. Björklund, F. Marra, L. Baiamonte and S. Joshi, Influence of Nozzle Configuration and Particle Size on Characteristics and Sliding Wear Behaviour of HVAF-Sprayed WC-CoCr Coatings, Surf. Coat. Technol., 2021, 423, p 127585.10.1016/j.surfcoat.2021.127585 ↗
38. V. Matikainen, H. Koivuluoto, P. Vuoristo, J. Schubert and Š Houdková, Effect of Nozzle Geometry on the Microstructure and Properties of HVAF-Sprayed WC-10Co4Cr and Cr3C2-25NiCr Coatings, J. Therm. Spray Tech., 2018, 27(4), p 680-694.10.1007/s11666-018-0717-z ↗
39. W.D. Callister and D.G. Rethwisch, Materials Science and Engineering, Wiley, Hoboken, 2015.
40. G. Mauer, D. Sebold, R. Vaßen, E. Hejrani, D. Naumenko and W.J. Quadakkers, Impact of Processing Conditions and Feedstock Characteristics on Thermally Sprayed MCrAlY Bondcoat Properties, Surf. Coat. Technol., 2017, 318, p 114-121.10.1016/j.surfcoat.2016.08.079 ↗
41. M. Löbel, T. Lindner, S. Clauß, R. Pippig, D. Dietrich and T. Lampke, Microstructure and Wear Behavior of the High-Velocity-Oxygen-Fuel Sprayed and Spark Plasma Sintered High-Entropy Alloy AlCrFeCoNi, Adv. Eng. Mater., 2021, 23(4), p 2001253.10.1002/adem.202001253 ↗
42. W. Brandl, H.J. Grabke, D. Toma and J. Krüger, The Oxidation Behaviour of Sprayed MCrAlY Coatings, Surf. Coat. Technol., 1996, 86-87, p 41-47.10.1016/S0257-8972(96)03039-3 ↗
43. J.R. Davis & Associates and ASM International, Eds., Process Variations, Handbook of thermal spray technology, (Materials Park, OH), ASM International, 2004, p 123-124.
44. J.R. Davis & Associates and ASM International, Eds., Splat, Handbook of thermal spray technology, (Materials Park, OH), ASM International, 2004, p 47-48.
45. P. Niranatlumpong, C.B. Ponton, and H.E. Evans, The Failure of Protective Oxides on Plasma-Sprayed NiCrAlY Overlay Coatings, n.d., p 18.
46. H. Choi, B. Yoon, H. Kim and C. Lee, Isothermal Oxidation of Air Plasma Spray NiCrAlY Bond Coatings, Surf. Coat. Technol., 2002, 150(2-3), p 297-308.10.1016/S0257-8972(01)01557-2 ↗
47. P. Zhang, E. Sadeghimeresht, S. Chen, X.-H. Li, N. Markocsan, S. Joshi, W. Chen, I.A. Buyanova and R.L. Peng, Effects of Surface Finish on the Initial Oxidation of HVAF-Sprayed NiCoCrAlY Coatings, Surf. Coat. Technol., 2019, 364, p 43-56.10.1016/j.surfcoat.2019.02.068 ↗
48. W. Kai, W.L. Jang, R.T. Huang, C.C. Lee, H.H. Hsieh and C.F. Du, Air Oxidation of FeCoNi-Base Equi-Molar Alloys at 800 and 1000°C, Oxid Met, 2005, 63(3-4), p 169-192.10.1007/s11085-004-3198-z ↗
49. X.-X. Yu, M.A. Taylor, J.H. Perepezko and L.D. Marks, Competition between Thermodynamics, Kinetics and Growth Mode in the Early-Stage Oxidation of an Equimolar CoCrFeNi Alloy, Acta Mater., 2020, 196, p 651-659.10.1016/j.actamat.2020.06.056 ↗
50. T.W. Cornelius, F. Mastropietro, O. Thomas, and T.U. Schülli, In Situ Nanofocused X-Ray Diffraction Combined with Scanning Probe Microscopy, X-ray Diffraction: Structure, Principles, and Applications, ([Hauppauge], New York), Nova Publishers, 2013, p 223-259.
51. A. Ganvir, V. Vaidhyanathan, N. Markocsan, M. Gupta, Z. Pala and F. Lukac, Failure Analysis of Thermally Cycled Columnar Thermal Barrier Coatings Produced by High-Velocity-Air Fuel and Axial-Suspension-Plasma Spraying: A Design Perspective, Ceram. Int., 2018, 44(3), p 3161-3172.10.1016/j.ceramint.2017.11.084 ↗
52. N. Curry, N. Markocsan, L. Östergren, X.-H. Li and M. Dorfman, Evaluation of the Lifetime and Thermal Conductivity of Dysprosia-Stabilized Thermal Barrier Coating Systems, J Therm Spray Tech, 2013, 22(6), p 864-872.10.1007/s11666-013-9932-9 ↗
53. B. Bernard, A. Quet, L. Bianchi, V. Schick, A. Joulia, A. Malié and B. Rémy, Effect of Suspension Plasma-Sprayed YSZ Columnar Microstructure and Bond Coat Surface Preparation on Thermal Barrier Coating Properties, J Therm Spray Tech, 2017, 26(6), p 1025-1037.10.1007/s11666-017-0584-z ↗
54. A.G. Evans, D.R. Clarke and C.G. Levi, The Influence of Oxides on the Performance of Advanced Gas Turbines, J. Eur. Ceram. Soc., 2008, 28(7), p 1405-1419.10.1016/j.jeurceramsoc.2007.12.023 ↗
55. A. Anupam, S. Kumar, N.M. Chavan, B.S. Murty and R.S. Kottada, First Report on Cold-Sprayed AlCoCrFeNi High-Entropy Alloy and Its Isothermal Oxidation, J. Mater. Res., 2019, 34(5), p 796-806.10.1557/jmr.2019.38 ↗
56. R. Gawel, Ł Rogal, J. Dąbek, M. Wójcik-Bania and K. Przybylski, High Temperature Oxidation Behaviour of Non-Equimolar AlCoCrFeNi High Entropy Alloys, Vacuum, 2021, 184, p 109969.10.1016/j.vacuum.2020.109969 ↗
57. T.M. Butler, J.P. Alfano, R.L. Martens and M.L. Weaver, High-Temperature Oxidation Behavior of Al-Co-Cr-Ni-(Fe or Si) Multicomponent High-Entropy Alloys, JOM, 2015, 67(1), p 246-259.10.1007/s11837-014-1185-7 ↗
58. T.M. Butler and M.L. Weaver, Oxidation Behavior of Arc Melted AlCoCrFeNi Multi-Component High-Entropy Alloys, J. Alloy. Compd., 2016, 674, p 229-244.10.1016/j.jallcom.2016.02.257 ↗
59. A. Anupam, A.S.M. Ang, K. Guruvidyathri, M. Abbas, D. Sivaprahasam, P. Munroe, C.C. Berndt, B.S. Murty and R.S. Kottada, Evaluating the Influence of Microstructural Attributes: Fraction Composition Size and Spatial Distribution of Phases on the Oxidation Behaviour of High-Entropy Alloys, Corros. Sci., 2021, 184, p 109381.10.1016/j.corsci.2021.109381 ↗
60. M.P. Borom and C.A. Johnson, Thermomechanical Behavior and Phase Relationships of Plasma-Sprayed Zirconia Coatings, Surf. Coat. Technol., 1992, 54-55, p 45-52.10.1016/S0257-8972(09)90026-3 ↗
61. J.A. Haynes, M.K. Ferber, W.D. Porter and E.D. Rigney, Mechanical Properties and Fracture Behavior of Interfacial Alumina Scales on Plasma-Sprayed Thermal Barrier Coatings, Mater. High Temp., 1999, 16(2), p 49-69.10.1179/mht.1999.006 ↗
62. M. Löbel, T. Lindner, R. Hunger, R. Berger and T. Lampke, Precipitation Hardening of the HVOF Sprayed Single-Phase High-Entropy Alloy CrFeCoNi, Coatings, 2020, 10(7), p 701.10.3390/coatings10070701 ↗