High-Temperature Oxidation and Hot Corrosion Studies on NiCrAlY Coatings Deposited by Flame-Spray Technique
Source abstract
Abstract
The NiCrAlY coatings deposited by flame-spray technique on the superalloy substrate were oxidized in the presence of air and Na2SO4 + V2O5 salt at 900 °C for 100 cycles. The kinetics of oxidation showed that the coatings deposited by flame-spray technique possess better oxidation resistance compared with coatings deposited by high-velocity oxy fuel (HVOF)-sprayed technique. The oxidized coatings were further characterized by XRD, FESEM/EDS, and x-ray mapping techniques. The mechanisms of the oxidation and hot corrosion were substantiated by analyzing the results obtained from the various characterization techniques.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Catalytic Processes in Materials Science · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. L.Y. Ni, C. Liu, H. Huang, and C.G. Zhou, Thermal Cycling Behavior of Thermal Barrier Coatings with HVOF NiCrAlY Bond Coat, J. Therm. Spray Technol., 2011, 20(5), p 1133-113810.1007/s11666-011-9647-8 ↗
2. Philip Puetz, Xiao Huang, Q. Yang, and Z. Tang, Transient Oxide Formation on APS NiCrAlY After Oxidation Heat Treatment, J. Therm. Spray Technol., 2011, 20(3), p 621-62910.1007/s11666-010-9602-0 ↗
3. M. Kaur, H. Singh, and S. Prakash, Surface Engineering Analysis of Detonation-Gun Sprayed Cr3 C2–NiCr Coating Under High-Temperature Oxidation and Oxidation–Erosion Environments, Surf. Coat. Technol., 2011, 206, p 530-54110.1016/j.surfcoat.2011.07.077 ↗
4. Niraj Bala, Harpreet Singh, Satya Prakash, and J. Karthikeyan, Investigations on the Behavior of HVOF and Cold Sprayed Ni-20Cr Coating on T22 Boiler Steel in Actual Boiler Environment, J. Therm. Spray Technol., 2012, 21(1), p 144-15810.1007/s11666-011-9698-x ↗
5. S. Matthews and M. Schweizer, High-Temperature Oxidation and Smelt Deposit Corrosion of Ni-Cr-Ti Arc-Sprayed Coatings, J. Therm. Spray Technol., 2010, 19(1–2), p 932-946
6. V. Higuera Hidalgo, J. Belzunce Varela, A. CarrilesMenéndeza, and S. Poveda Martínez, High temperature erosion wear of flame and plasma-sprayed nickel–chromium coatings under simulated coal-fired boiler atmospheres, Wear, 2001, 247, p 214-22210.1016/S0043-1648(00)00540-8 ↗
7. B. Uyulgan, E. Dokumaci, E. Celik, I. Kayatekin, N.F. Ak Azem, I. Ozdemir, and M. Toparli, Wear Behaviour of Thermal Flame Sprayed FeCr Coatings on Plain Carbon Steel Substrate, J. Mater. Process. Technol., 2007, 190, p 204-21010.1016/j.jmatprotec.2007.02.044 ↗
8. S. Sharma, High Temperature Erosive Wear Study of NiCrFeSiB Flame Sprayed Coating, J. Inst. Eng. Ser. D, 2012, 93(1), p 7-1210.1007/s40033-012-0006-9 ↗
9. K.A. Habib, J.J. Saura, C. Ferrer, M.S. Damra, E. Giménez, and L. Cabedo, Comparison of Flame Sprayed Al2O3/TiO2 Coatings: Their Microstructure, Mechanical Properties and Tribology Behaviour, Surf. Coat. Technol., 2006, 201, p 1436-144310.1016/j.surfcoat.2006.02.011 ↗
10. R. Gonz´alez, M. Cadenas, R. Fern´andez, J.L. Cortizo, and E. Rodr´ıguez, Wear Behaviour of Flame Sprayed NiCrBSi Coating Remelted by Flame or by Laser, Wear, 2007, 262, p 301-30710.1016/j.wear.2006.05.009 ↗
11. Q. Wang, Z. Chen, Z.X. Ding, and D. Chen, Abrasive Wear Behaviour of WC Reinforced Ni Based Composite Coatings Sprayed and Fused by Oxy-Acetylene Flame, Surf. Rev. Lett., 2009, 1(3), p 475-48510.1142/S0218625X09012883 ↗
12. D. Chaliampalias, G. Vourlias, E. Pavlidou, S. Skolianos, K. Chrissafis, and G. Stergioudis, Comparative Examination of the Microstructure and High Temperature Oxidation Performance of NiCrBSi Flame Sprayed and Pack Cementation Coatings, Appl. Surf. Sci., 2009, 255, p 3605-361210.1016/j.apsusc.2008.10.006 ↗
13. M.H. Li, Z.Y. Zhang, X.F. Sun, J.G. Li, F.S. Yin, W.Y. Hu, H.R. Guan, and Z.Q. Hu, Oxidation Behavior of Sputter-Deposited NiCrAlY Coating, Surf. Coat. Technol., 2003, 165, p 241-24710.1016/S0257-8972(02)00738-7 ↗
14. D. Toma, W. Brandl, and U. Koster, The Characteristics of Alumina Scales Formed on HVOF-Sprayed MCrAlY Coatings, Oxid. Met., 2000, 53, p 125-13710.1023/A:1004586814837 ↗
15. N. Czech, F. Schmitz, and W. Stamm, Microstructural Analysis of the Role of Rhenium in Advanced MCrAlY Coatings, Surf. Coat. Technol., 1995, 76–77, p 28-3310.1016/0257-8972(95)02546-4 ↗
16. J.W. Hutchinson and A.G. Evans, On the Delamination of Thermal Barrier Coatings in a Thermal Gradient, Surf. Coat. Technol., 2002, 149, p 179-18410.1016/S0257-8972(01)01451-7 ↗
17. Yong Li, Chang-Jiu Li, Qiang Zhang, Lu-Kuo Xing, and Guan-Jun Yang, Effect of Chemical Compositions and Surface Morphologies of MCrAlY Coating on Its Isothermal Oxidation Behavior, J. Therm. Spray Technol., 2011, 20(1–2), p 121-131
18. T.S. Sidhu, S. Prakash, and R.D. Agrwal, Hot Corrosion Performance of Nickel Based Coatings, Curr. Sci., 2006, 90, p 41-47
19. T. Hussain, T. Dudziak, N.J. Simms, and J.R. Nicholls, Fireside Corrosion Behavior of HVOF and Plasma-Sprayed Coatings in Advanced Coal/Biomass Co-Fired Power Plants, J. Therm. Spray Technol., 2013, 22(5), p 797-80710.1007/s11666-013-9887-x ↗
20. F. Rizzo, M. Monteiro, M.F. Lopes, I. Caminha, C. Zeng, and M. Piza Paes, Evaluation of the Corrosion Resistance of Thermal-Spray Coatings Under Oxidant Atmosphere in a Fluid Catalytic-Cracking Unit, Oxid. Met., 2002, 57, p 323-33810.1023/A:1014830519799 ↗
21. N. Rana, R. Jayaganthan, and S. Prakash, Microstructural Features and Oxidation Behaviour of NiCrAlY Coatings Obtained by HVOF Process, Adv. Mater. Res., 2012, 585, p 507-51110.4028/www.scientific.net/AMR.585.507 ↗
22. J. Matejicek and S. Sampath, Intrinsic Residual Stresses in Single Splats Produced by Thermal Spray Processes, Acta Mater., 2001, 49, p 1993-199910.1016/S1359-6454(01)00099-4 ↗
23. O. Redjdal, B. Zaid, M.S. Tabti, K. Henda, and P.C. Lacaze, Characterization of Thermal Flame Sprayed Coatings Prepared from FeCr Mechanically Milled Powder, J. Mater. Process. Technol., 2013, 213, p 779-79010.1016/j.jmatprotec.2012.11.018 ↗
24. N. Rana, R. Jayaganthan, and S. Prakash, Stepwise Oxidation Mechanism of HVOF Sprayed NiCrAlY Coatings in Air, T Indian I, Metals, 2014, 67, p 393-40010.1007/s12666-013-0362-7 ↗
25. N. Rana, R. Jayaganthan, and S. Prakash, Stepwise Depletion of Coating Elements as a Result of Hot Corrosion of NiCrAlY Coating, J. Mater. Eng. Perform., 2014, 23, p 643-65010.1007/s11665-013-0774-x ↗
26. G. Sreedhar, M. Alam, and V.S. Raja, Hot Corrosion Behaviour of Plasma Sprayed YSZ/Al2O3 Dispersed NiCrAlY Coatings on Inconel-718 Superalloy, Surf. Coat. Technol., 2009, 204, p 291-29910.1016/j.surfcoat.2009.07.026 ↗
27. X. Chena, Y. Zhao, L. Gua, B. Zou, Y. Wang, and X. Cao, Hot Corrosion Behaviour of Plasma Sprayed YSZ/LaMgAl11O19 Composite Coatings in Molten Sulfate–Vanadate Salt, Corros. Sci., 2011, 53, p 2335-234310.1016/j.corsci.2011.03.019 ↗
28. J. Ma, S.M. Jiang, J. Gong, and C. Sun, Behaviour and Mechanisms of Alkali-Sulphate-Induced Hot Corrosion on Composite Coatings at 900 °C, Corros. Sci., 2012, 58, p 251-25910.1016/j.corsci.2012.01.034 ↗
29. T. Hirata, K. Akiyama, and H. Yamamoto, Corrosion Resistance of Cr2O3-Al2O3 Ceramics by Molten Sodium Sulphate–Vanadium Pentoxide, J. Mater. Sci., 2001, 36, p 5927-593410.1023/A:1012941129678 ↗
30. T.A. Ramanarayana, Metallic Y Addition to High Temperature Alloys: Influence on Al2O3 Scale Properties, Oxid. Met., 1984, 22, p 83-10010.1007/BF00656898 ↗
31. E.W.A. Young and J.H.W. Wit, An 18O Tracer Study on the Growth Mechanism of Alumina Scales on NiAl and NiAlY Alloys, Oxid. Met., 1986, 26, p 351-36110.1007/BF00659341 ↗
32. L.A. Klinkova and E.A. Ukshe, Zh. Neorg. Khim., 1975, 20(2), p 481
33. S. Mohsen, A. Abbas, and K. Akira, Bond Coat Oxidation and Hot Corrosion Behaviour of Plasma Sprayed YSZ Coating on Ni Based Superalloy, Trans. JWRI., 2007, 36, p 41-45
34. C. Batista, A. Portinha, R.M. Ribeiro, V. Teixeira, and C.R. Oliveira, Evaluation of Laser-Glazed Plasma-Sprayed Thermal Barrier Coatings Under High Temperature Exposure to Molten Salts, Surf. Coat. Technol., 2006, 200, p 6783-679110.1016/j.surfcoat.2005.10.011 ↗
35. C.S. Giggins and F.S. Pettit, Oxidation of NiCrAl alloys between 1000-1200 °C, J. Electrochem. Soc. Solid State Sci., 1971, 118, p 1782-1790
36. U.K. Chatterjee, S.K. Bose, and S.K. Roy, Environmental Degradation of Metals, Marcel Dekker, New York, 200110.1201/9781482292244 ↗
37. Gitanjaly, Role of Inhibitors on Hot Corrosion of Superalloys in Na 2 SO 4 -V 2 O 5 Environment. Ph.D. Thesis, Met. Mater. Eng. Dept., Indian Institute of Technology Roorkee, Roorkee, India, 2003
38. W.H. Lee and R.Y. Lin, Hot Corrosion Mechanism of Intermetallic Compound Ni3Al, Mater. Chem. Phys., 2003, 77(1), p 86-9610.1016/S0254-0584(01)00567-3 ↗
39. J.A. Goebel, F.S. Pettit, and G.W. Goward, Mechanisms for the Hot Corrosion of Nickel-Base Alloys, Metall. Mater. Trans. A, 1973, 4(1), p 261-27810.1007/BF02649626 ↗