journal article·2015-10

Cycling Performance of a Columnar-Structured Complex Perovskite in a Temperature Gradient Test

N. Schlegel, D. Sebold, Y. J. Sohn, G. Mauer, R. Vaßen

Publisher page

Abstract

To increase the efficiency of turbines for the power generation and the aircraft industry, advanced thermal barrier coatings (TBCs) are required. They need to be long-term stable at temperatures higher than 1200 °C. Nowadays, yttria partially stabilized zirconia (YSZ) is applied as standard TBC material. But its long-term application at temperatures higher than 1200 °C leads to detrimental phase changes and sintering effects. Therefore, new materials have to be investigated, for example, complex perovskites. They provide high melting points, high thermal expansion coefficients and thermal conductivities of approx. 2.0 W/(m K). In this work, the complex perovskite La(Al1/4Mg1/2Ta1/4)O3 (LAMT) was investigated. It was deposited by the suspension plasma spraying (SPS) process, resulting in a columnar microstructure of the coating. The coatings were tested in thermal cycling gradient tests and they show excellent results, even though some phase decomposition was found.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. D. Stöver and C. Funke, Directions of the Development of Thermal Barrier Coatings in Energy Applications, J. Mater. Process. Technol., 1999, 92-93, p 195-20210.1016/S0924-0136(99)00244-7 ↗
2. R. Vaßen, F. Tietz, G. Kerkhoff, and D. Stöver, New Materials for Advanced Thermal Barrier Coatings, Materials for Advanced Power Engineering 1998 - Proceedings of the 6 th Liège Conference Part III, J. Lecomte-Beckers, F. Schuber, and P. J. Ennis Eds., 1998 (Liège, Belgium), Forschungszentrum Jülich GmbH, Jülich, Germany, 1998, p 1627-1635
3. D.R. Clarke and S.R. Phillpot, Thermal Barrier Coating Materials, Mater. Today, 2005, 8(6), p 22-2910.1016/S1369-7021(05)70934-2 ↗
4. R. Vaßen, M.O. Jarligo, T. Steinke, D.E. Mack, and D. Stöver, Overview on Advanced Thermal Barrier Coatings, Surf. Coat. Technol., 2010, 205(4), p 938-94210.1016/j.surfcoat.2010.08.151 ↗
5. G. Mauer, M.O. Jarligo, D.E. Mack, and R. Vaßen, Plasma-Sprayed Thermal Barrier Coatings: New Materials, Processing Issues, and Solutions, J. Therm. Spray Technol., 2013, 22(5), p 646-65810.1007/s11666-013-9889-8 ↗
6. G. Mauer, N. Schlegel, A. Guignard, M.O. Jarligo, S. Rezanka, A. Hospach, and R. Vaßen, Plasma Spraying of Ceramics with Particular Difficulties in Processing, J. Therm. Spray Technol., 2015, 24(1-2), p 30-37
7. O. Ruff and M. Konschak, Arbeiten im Gebiet hoher Temperaturen, Z. f. Elektroch., 1926, 32(11), p 515-525 (in German)
8. G.V. Samsonov, The Oxide Handbook, IFI/Plenum, London, UK, 197310.1007/978-1-4615-9597-7 ↗
9. N.S. Jacobson, Thermodynamic Properties of Some Metal Oxide-Zirconia Systems, NASA-TM-102351, 1989, p 1-62
10. Ltd. Optotec Materials Co., Tantal-Oxid, http://de.made-in-china.com/co_optotecomc/product_Tantalum-Oxide_hnnghuisg.html [Access-Date: 14/10/2014]
11. M.O. Jarligo, D.E. Mack, R. Vaßen, and D. Stöver, Application of Plasma-Sprayed Complex Perovskites as Thermal Barrier Coatings, J. Therm. Spray Technol., 2009, 18(2), p 187-19310.1007/s11666-009-9302-9 ↗
12. T. Maekawa, K. Kurosaki, and S. Yamanaka, Thermal and Mechanical Properties of Perovskite-Type Barium Hafnate, J. Alloys Compd., 2006, 407(1-2), p 44-4810.1016/j.jallcom.2005.06.030 ↗
13. D. Stöver, G. Pracht, H. Lehmann, M. Dietrich, J.E. Döring, and R. Vaßen, New Material Concepts for the Next Generation of Plasma-Sprayed Thermal Barrier Coatings, J. Therm. Spray. Technol., 2004, 13(1), p 76-8310.1007/s11666-004-0052-4 ↗
14. N.P. Bansal, D. Zhu, and M. Eslamloo-Grami, Effects of Doping on Thermal Conductivity of Pyrochlore Oxides for Advanced Thermal Barrier Coatings, Mater. Sci. Eng. A, 2007, 459(1-2), p 192-19510.1016/j.msea.2007.01.069 ↗
15. R. Vaßen, F. Träger, and D. Stöver, New Thermal Barrier Coatings Based on Pyrochlore/YSZ Double-Layer Systems, Int. J. Appl. Ceram. Technol., 2004, 1(4), p 351-36110.1111/j.1744-7402.2004.tb00186.x ↗
16. A. Guignard, G. Mauer, R. Vaßen, and D. Stöver, Deposition and Characteristics of Submicrometer-Structured Thermal Barrier Coatings by Suspension Plasma Spraying, J. Therm. Spray Technol., 2012, 21(3-4), p 416-42410.1007/s11666-012-9762-1 ↗
17. N. Schlegel, S. Ebert, G. Mauer, and R. Vaßen, Columnar-Structured Mg-Al-Spinel Thermal Barrier Coatings (TBCs) by Suspension Plasma Spraying (SPS), J. Therm. Spray Technol., 2015, 24(1-2), p 144-151
18. F. Träger, R. Vaßen, K.H. Rauwald, and D. Stöver, Thermal Cycling Setup for Testing Thermal Barrier Coatings, Adv. Eng. Mater., 2003, 5(6), p 429-43210.1002/adem.200300337 ↗
19. M.J. Donachie and S.J. Donachie, Superalloys: A Technical Guide, ASM International, Novelty, OH, 200210.31399/asm.tb.stg2.9781627082679 ↗
20. S. Ebert, R. Mücke, D.E. Mack, R. Vaßen, D. Stöver, T. Wobst, and S. Gebhard, Failure Mechanisms of Magnesia Alumina Spinel Abradable Coatings Under Thermal Cyclic Loading, J. Eur. Ceram. Soc., 2013, 33(15-16), p 3335-334310.1016/j.jeurceramsoc.2013.06.021 ↗
21. S.M. Ebert, Ph.D. Thesis (Ruhr-Universität Bochum: Fakultät für Maschinenbau, Bochum, Germany): Versagensverhalten plasmagespritzter Mg-Al-Spinell-Schichten unter Thermozyklierung, Schriften des Forschungszentrums Jülich: Energie & Umwelt/Energy & Environment, 166, Forschungszentrum Jülich GmbH, Jülich, Germany, 2013, in German
22. R. Vaßen, S. Giesen, and D. Stöver, Lifetime of Plasma-Sprayed Thermal Barrier Coatings: Comparison of Numerical and Experimental Results, J. Therm. Spray Technol., 2009, 18(5-6), p 835-84510.1007/s11666-009-9389-z ↗
23. N.S. Afonskii and M. Neiman, Investigation of the Phase Composition of the La2O3-Ta2O5 System, Inorg. Mater., 1967, 3(7), p 1132-1134
24. H.P. Rooksby and E.A.D. White, Rare-Earth Niobates and Tantalates of Defect Fluorite-Type and Weberite-Type Structures, J. Am. Ceram. Soc., 1964, 47(2), p 94-9610.1111/j.1151-2916.1964.tb15663.x ↗
25. J.G. Allpress and H.J. Rossell, Fluorite-Related Phases Ln3MO7, Ln = Rare-Earth, Y, or Sc, M = Nb, Sb, or Ta. 1. Crystal-Chemistry, J. Solid State Chem., 1979, 27(1), p 105-11410.1016/0022-4596(79)90149-X ↗
26. M. Wakeshima, H. Nishimine, and Y. Hinatsu, Crystal Structures and Magnetic Properties of Rare Earth Tantalates RE3TaO7 (RE = Rare Earths), J. Phys.: Condens. Matter., 2004, 16(23), p 4103-4120
27. M.O. Jarligo, D.E. Mack, G. Mauer, R. Vaßen, and D. Stöver, Atmospheric Plasma Spraying of High Melting Temperature Complex Perovskites for TBC Application, J. Therm. Spray Technol., 2010, 19(1-2), p 303-31010.1007/s11666-009-9377-3 ↗
28. C. Nordhorn, R. Mücke, D.E. Mack, and R. Vaßen, Probabilistic Lifetime Model for Atmospherically Plasma Sprayed Thermal Barrier Coating Systems, Mech. Mater. (submitted)
29. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296, p 280-28410.1126/science.1068609 ↗
30. C. Nordhorn, R. Mücke, K.A. Unocic, M.J. Lance, B.A. Pint, and R. Vaßen, Effects of Thermal Cycling Parameters on Residual Stresses in Alumina Scales of CoNiCrAlY and NiCoCrAlY Bond Coats, Surf. Coat. Technol., 2014, 258, p 608-61410.1016/j.surfcoat.2014.08.028 ↗
31. F. Träger, M. Ahrens, R. Vaßen, and D. Stöver, A Life Time Model for Ceramic Thermal Barrier Coatings, Mater. Sci. Eng. A., 2003, 358(1-2), p 255-26510.1016/S0921-5093(03)00300-9 ↗
32. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit, Mechanisms Controlling the Durability of Thermal Barrier Coatings, Prog. Mater. Sci., 2001, 46(5), p 505-55310.1016/S0079-6425(00)00020-7 ↗
33. E.P. Busso, H.E. Evans, Z.Q. Qian, and M.P. Taylor, Effects of Breakaway Oxidation on Local Stresses in Thermal Barrier Coatings, Acta Mater., 2010, 58(4), p 1242-125110.1016/j.actamat.2009.10.028 ↗
34. D. Kim, I. Shin, J. Koo, S. Kim, D. Seo, J. Kim, and C. Seok, Quantitative Analysis on the Depletion Rate of β-NiAl Phases in MCrAlY Coating, J. Mech. Sci. Technol., 2014, 28(2), p 513-51910.1007/s12206-013-1118-3 ↗
35. A. Nakatsuka, O. Ohtaka, H. Arima, N.A. Noriaki, and T. Mizota, Cubic Phase of Single-Crystal LaAlO3 Perovskite Synthesized at 4.5 GPa and 1273 K, Acta Crystallogr. Sect. E: Struct. Rep. Online, 2005, 61, p I148-I15010.1107/S1600536805020441 ↗
36. P. Wu and A.D. Pelton, Coupled Thermodynamic-Phase Diagram Assessment of the Rare Earth Oxide-Aluminium Oxide Binary Systems, J. Alloys Compd., 1992, 179(1-2), p 259-28710.1016/0925-8388(92)90227-Z ↗