journal article·2023-08Open access

Numerical Investigation of the Effect of a Nozzle Extension on the Plasma Jet in Multi-Arc Plasma Spraying

K. Bobzin, H. Heinemann, S. R. Dokhanchi

Abstract

Abstract In plasma spraying, compared to other thermal spraying process variants, only a small part of the available energy is used to build up a coating. Another peculiarity of this process is the relatively strong oxidation of the sprayed metallic particles, caused by the high temperatures and turbulent flow of the plasma jet in combination with the ambient air. A promising solution for increasing energy efficiency is a solid shroud that surrounds the plasma jet and thus prevents air entrainments from mixing with the plasma gas. The primary goal of this study is to develop a numerical model to investigate the effect of an external fixed nozzle extension on the plasma jet as a shroud in case of a multi-arc plasma generator. To this end, the existing simulation models of the plasma jet from the previous works of the authors were extended to model a solid nozzle extension at the outlet of a three-arc plasma generator. The developed parametrized model can be used to optimize the geometry of the nozzle extension based on experimental measurements to adapt it to the flow conditions of the plasma jet. The results revealed that the plasma temperature could be increased using the nozzle extension even with relatively cold process parameters, thereby raising the energy efficiency to melt the particles in plasma spraying.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. J.R. Fincke, W.D. Swank and D.C. Haggard, Plasma Spraying of Alumina: Plasma and Particle Flow Fields, Plasma Chem. Plasma Process., 1993, 13(4), p 579-600.10.1007/BF01570132 ↗
2. K. Taheri, M. Elhoriny, M. Plachetta and R. Gadow, Thermodynamic Analysis of Resources Used in Thermal Spray Processes: Energy and Exergy Methods, Entropy, 2016, 18(7), p 237.10.3390/e18070237 ↗
3. M.L. Thorpe, Thermal Spray Industry in Transition, Adv. Mater. Processes, 1993, 143(5), p 50-56.
4. R.B. Heimann, Plasma Spray Coating: Principles and Applications, 2nd ed. Wiley-VCH, Weinheim, 2008.
5. E. Pfender, J. Fincke and R. Spores, Entrainment of Cold Gas into Thermal Plasma Jets, Plasma Chem. Plasma Process., 1991, 11(4), p 529-543.10.1007/BF01447164 ↗
6. P. Fauchais, Understanding Plasma Spraying, Plasma Chem. Plasma Process., 2004, 37(9), p R86-R108.
7. M.F. Morks and C.C. Berndt, Corrosion and Oxidation Properties of Nicr Coatings Sprayed in Presence of Gas Shroud System, Appl. Surf. Sci., 2010, 256(13), p 4322-4327.10.1016/j.apsusc.2010.02.024 ↗
8. M.P. Planche, H. Liao and C. Coddet, Oxidation Control in Atmospheric Plasma Spraying Coating, Surf. Coat. Technol., 2007, 202(1), p 69-76.10.1016/j.surfcoat.2007.04.053 ↗
9. S. Matthews, Shrouded Plasma Spray of Ni-20Cr Coatings Utilizing Internal Shroud Film Cooling, Surf. Coat. Technol., 2014, 249, p 56-74.10.1016/j.surfcoat.2014.03.050 ↗
10. J. Kim, K. Kang, S. Yoon and C. Lee, Enhancement of Metallic Glass Properties of Cu-Based Bmg Coating By Shroud Plasma Spraying, Surf. Coat. Technol., 2011, 205(8-9), p 3020-3026.10.1016/j.surfcoat.2010.11.012 ↗
11. M. Jankovic and J. Mostaghimi, A New Nozzle Design For Dc Plasma Spray Guns, Plasma Chem Plasma Process, 1995, 15(4), p 607-628.10.1007/BF01447063 ↗
12. M. Jankovic, J. Mostaghimi and V. Pershin, Design of a New Nozzle For Direct Current Plasma Guns With Improved Spraying Parameters, J. Therm. Spray Technol., 2000, 9(1), p 114-120.10.1361/105996300770350140 ↗
13. H.-X. Wang, X. Chen and W. Pan, Effects of the Length of a Cylindrical Solid Shield on the Entrainment of Ambient Air into Turbulent and Laminar Impinging Argon Plasma Jets, Plasma Chem. Plasma Process., 2008, 28(1), p 85-105.10.1007/s11090-007-9109-8 ↗
14. D.T. Gawne, T. Zhang and B. Liu, Computational Analysis of the Influence of a Substrate, Solid Shield and Gas Shroud on the Flow Field of a Plasma Jet, Surf. Coat. Technol., 2002, 153(2-3), p 138-147.10.1016/S0257-8972(01)01672-3 ↗
15. T. Liu, L. Zheng and H. Zhang, Effect of Solid Shield on Coating Properties in Atmospheric Plasma Spray Process, J. Therm. Spray. Tech., 2016, 25(8), p 1502-1515.10.1007/s11666-016-0442-4 ↗
16. P.L. Fauchais, J.V. Heberlein and M.I. Boulos, Thermal Spray Fundamentals: From Powder to Part, Springer, New York, 2014.10.1007/978-0-387-68991-3 ↗
17. J.P. Trelles, C. Chazelas, A. Vardelle and J.V.R. Heberlein, Arc Plasma Torch Modeling, J. Therm. Spray Tech., 2009, 18(5-6), p 728-752.10.1007/s11666-009-9342-1 ↗
18. K. Bobzin, M. Öte, J. Schein and S. Zimmermann, Numerical Study on Plasma Jet and Particle Behavior in Multi-Arc Plasma Spraying, J. Therm. Spray Tech., 2017, 26(5), p 811-830.10.1007/s11666-017-0564-3 ↗
19. M. Öte, Understanding Multi-Arc Plasma Spraying, Dissertation, RWTH Aachen; Shaker Verlag.
20. K. Bobzin and M. Öte, Modeling Plasma-Particle Interaction in Multi-Arc Plasma Spraying, J. Therm. Spray Tech., 2017, 26(3), p 279-291.10.1007/s11666-016-0514-5 ↗
21. A. Burcat, B. Ruscic, and Chemistry, Third millenium ideal gas and condensed phase thermochemical database for combustion (with update from active thermochemical tables) (2005).10.2172/925269 ↗