journal article·2023-08Open access

Coating of Aluminum with High Deposition Rates through Extreme High-Speed Laser Application

Stephan Koß, Sabrina Vogt, Marco Göbel, Johannes Henrich Schleifenbaum

Abstract

Abstract In the past few years, the Extreme High-Speed Laser Application (EHLA) process has been used as a coating technology alongside conventional processes due to its unique process characteristics and as an economical and sustainable alternative to traditional technologies. Compared to other LMD processes, the main energy input is into the powder material instead of into the substrate. This potentiates the achievement of to significantly higher surface and deposition rates as well as the coating of heat-sensitive substrates. Moreover, this increase in resource efficiency leads to a more sustainable and economically attractive process. To reduce component´s weight as well as secondary energy consumption, aluminum has become an essential base material in most industrial sectors. Aluminum is not simple to process its resistance is comparatively small due to its low hardness in relation to widely used steels. The low melting temperature of aluminum (approx. 750 °C) poses a great challenge when coating with, for example, iron-based alloys. Another challenge for laser-based systems is the reflectance of aluminum in the wavelength range of conventional laser beam sources (approx. between 1030 and 1070 nm). Therefore, for conventional laser-based processes, laser beam sources in other wavelength spectra, e.g., green or blue, are being developed to improve the processing of aluminum. Currently, commercially available multi-kW lasers in the visible light spectrum are still below the available power of IR-beam sources. In the context of this study, the feasibility of coating aluminum mase materials using EHLA is investigated. Besides the feasibility, the focus is to determine the maximum achievable surface and deposition rates up to the utilization of the available 8 kW infrared laser powder.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Laser Material Processing Techniques · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Maschinenbau-Wissen. Dichte von Aluminium und Al-Legierungen. In: Maschinenbau-Wissen.de (2009).
2. J. Döschner, Aluminium-Produktion in Deutschland: Schmutzig, teuer, überflüssig. Tagesschau. https://www.tagesschau.de/wirtschaft/aluminium102.html.
3. J. Vasters, G. Franken, Aluminium: Information zur Nachhaltigkeit. Hannover (2020).
4. H. Elsner, D. Homberg-Heumann, D. Huy, R. Lutz, K. Moldenhauer, M. Pein, M. Schauer, S. Schmidt, M. Schmitz, H. Sievers, M. Szurlies, and H. Wilken, Deutschland-Rohstoffsituation (2018).
5. H.-P. Zepf, Faserverbundwerkstoffe mit thermoplastischer Matrix: Hochleistungswerkstoffe für rationelle Verarbeitung; mit 27 Tabellen und 107 Literaturstellen. Kontakt & Studium, Vol 529. Renningen-Malmsheim: expert-Verl (1997).
6. A. Guminski, E. Rouyrre, and M. Wiener, CO2-Verminderung in der Primäraluminiumherstellung. FFE Forschungsgemeinschaft für Energiewirtschaft (2019).
7. International Aluminium Institute. IAI MATERIAL FLOW MODEL–2021 UPDATE.
8. Finanzen.net. Aluminiumpreis Chart. In: https://www.finanzen.net/rohstoffe/aluminiumpreis.
9. Laser world of Photonics. Wellenlänge und Absorption. In: https://world-of-photonics.com/de/newsroom/photonik-branchenportal/photonik-kompakt/in-30- sekunden/wellenlaenge-und-absorption/.
10. J. Landry, Wie funktioniert das Laserätzen? Das Material absorbiert die Energie des Laserstrahls (2019).
11. Koß Stephan, A. Holzer, S. Megahed, S. Ziegler, J. H. Schleifenbaum, and K. Schmitz, Investigation of the coating of hydrodynamic plain bearing contact surfaces by means of Extreme High-Speed Laser Material Deposition (EHLA) (2021).10.1088/1757-899X/1097/1/012016 ↗
12. T. Schopphoven, A. Gasser, and G. Backes, T. Schopphoven, A. Gasser, and G. Backes, EHLA: Extreme High-Speed Laser Material Deposition: Economical and effective protection against corrosion and wear, Vol 14.10.1002/latj.201770308 ↗
13. T. Li, L. Zhang, G. G. P. Bultel, T. Schopphoven, A. Gasser, J. H. Schleifenbaum, and R. Poprawe, Extreme High-Speed Laser Material Deposition (EHLA) of AISI 4340 Steel.
14. T. Schopphoven, A. Gasser and G.E.H.L.A. Backes, Extreme High-Speed Laser Material Deposition, LTJ, 2017, 14, p 26–29.10.1002/latj.201700020 ↗
15. HD Special Optics for Laser Technology. HIGHNO-NEW GENERATION OF THE COAXIAL POWDER NOZZLE.
16. TWI, What is Extreme High Speed Laser Application (EHLA).
17. T. Schopphoven, A. Gasser, K. Wissenbach, T. Schopphoven, A. Gasser, K. Wissenbach and R. Poprawe, Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying, J. Laser Appl., 2016, 28, p 7778.10.2351/1.4943910 ↗
18. M. Rettig, J. Grochowicz, K. Käsgen, R. Eaton, A. Wank, A. Hitzek, C. Schmengler, S. Koß, M.Voshage, J. H. Schleifenbaum, C. Verpoort, T. Weber, Carbidic Brake Rotor Surface Coating Applied by High-Performance Laser-Cladding; EuroBrake2020; 2020.10.46720/eb2020-mds-025 ↗
19. Koß Stephan, S. Koß, S. Ewald, M.-N. Bold, J. H. Koch, M. Voshage et al., Comparison of the EHLA and LPBF Process in Context of New Alloy Design Methods for LPBF, Vol 1161.10.4028/www.scientific.net/AMR.1161.13 ↗
20. ECKART, Produktdatenblatt TLS AlSi10Mg.
21. G. Marchese, X. G. Colera, F. Calignano, M. Lorusso, S. Biamino, P. Minetola, and D. Manfredi, Characterization and Comparison of Inconel 625 Processed by Selective Laser Melting and Laser Metal Deposition, Vol 19. 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim (2017).10.1002/adem.201600635 ↗