Effect of Ball-to-Powder Ratio on Morphology, Structure, and Flowability of Ball-Milled Gray Cast Iron Powder
Source abstract
Abstract
With the conventional gas or water atomization process of synthesizing metallic powders, it is difficult to obtain graphite structure in a gray cast powder particle because of rapid cooling of the molten droplets. In this work, a fabrication method of gray cast iron powder with graphite structure was proposed based on a structural transplantation route. In the fabrication process, the precursor powder was firstly prepared by mechanically separating from as-cast gray cast iron bulk, then the precursor powder was ball-milled with different ratios of ball-to-powder to obtain final powders. The profile, size distribution, and surface roughness of final powders were quantitatively characterized by circularity, particle uniformity level, and fractal dimension method, respectively. It was found that ball milling smoothed the sharp edges and corners of the precursor powder and reduced the size of the precursor powder. As a result, the ball-milled powders have a more regular shape, more uniform size distribution, lower surface roughness, and better flowability than the precursor powder for thermal spray applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Granular flow and fluidized beds · Particle Dynamics in Fluid Flows · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. L. Nastac and D.M. Stefanescu, Prediction of Gray-to-White Transition in Cast Iron by Solidification Modeling, AFS Trans., 1995, 103, p 329–337.
2. M. Vardelle, A. Vardelle, A.C. Leger, P. Fauchais and D. Gobin, Influence of Particle Parameters at Impact on Splat Formation and Solidification in Plasma spraying processes, J. Therm. Spray Technol., 1995, 4, p 50–58.10.1007/BF02648528 ↗
3. Y.Z. Xing, C.J. Li, J.H. Qiao, G.X. Wang. Analysis on rapid cooling and epitaxial solidification of a plasma-sprayed yttria stabilized zirconia splat on a high-temperature substrate, in Proceedings of the ASME International Mechanical Engineering Congress and Exposition. Washington: ASME. 8 (2007) 1837–1844.10.1115/IMECE2007-43266 ↗
4. Y.Z. Xing, C.P. Jiang, J.M. Hao and R. Sun, Numerical Analysis on Substrate Melting During Plasma-Spraying Cast Iron on Aluminum Surface, Rev. Adv. Mater. Sci., 2013, 33, p 276–280.
5. M.F. Morks, Y. Tsunekawa, M. Okumiva and M.A. Shoeib, Splat Morphology and Microstructure of Plasma Sprayed Cast Iron with Different Preheat Substrate Temperatures, J. Therm. Spray Technol., 2002, 11, p 226–232.10.1361/105996302770348880 ↗
6. M.F. Morks, Y. Tsunekawa, M. Okumiya and M.A. Shoeib, Microstructure of Plasma-Sprayed Cast Iron Splats with Different Particle Sizes, Mater. Trans., 2005, 44, p 743–748.10.2320/matertrans.44.743 ↗
7. M.F. Morks, Y. Tsunekawa, M. Okumiya and M.A. Shoeib, Splat Microstructure of Plasma Sprayed Cast Iron with Different Chamber Pressures, J. Therm. Spray Technol., 2003, 12, p 282–289.10.1361/105996303770348393 ↗
8. H.B. Xiong, L.L. Zheng, L. Li, A.J. Vaidya and M. Transfer, Melting and Oxidation Behavior of In-Flight Particles in Plasma Spray Process, Int. J. Heat Mass Trans., 2005, 48, p 5121–5133.10.1016/j.ijheatmasstransfer.2005.07.019 ↗
9. C. Tekmen, K. Iwata, Y. Tsunekawa and M. Okumiya, Controlling Graphite Content in Plasma Sprayed Cast Iron Coatings Via In-Flight Particle Diagnostic, J Mater. Process. Technol., 2009, 209, p 5417–5422.10.1016/j.jmatprotec.2009.04.015 ↗
10. C. Tekmen, K. Iwata, Y. Tsunekawa and M. Okumiya, Influence of Methane and Carbon Dioxide on In-Flight Particle Behavior of Cast Iron Powder by Atmospheric Plasma Spraying, Mater. Lett., 2009, 63, p 2439–2441.10.1016/j.matlet.2009.08.026 ↗
11. L. Yangzhen, L. Yefei, X. Jiandong, W. Shaogang, Z. Baochao, T. Dong and L. Wei, Effect of Graphite Morphology on the Tensile Strength and Thermal Conductivity of Cast Iron, Mater. Charact., 2018, 144, p 155–165.10.1016/j.matchar.2018.07.001 ↗
12. R. González-Martínez, U.D.L. Torre, A. Ebel, J. Lacaze and J. Sertucha, Effects of High Silicon Contents on Graphite Morphology and Room Temperature Mechanical Properties of As-Cast Ferritic Ductile Cast Irons. Part II-Mechanical Properties, Mater. Sci. Eng. A, 2018, 712, p 803–811.10.1016/j.msea.2017.11.051 ↗
13. M.F. Morks, Y. Tsunekawa, N.F. Fahim and M. Okumiya, Microstructure and Friction Properties of Plasma Sprayed Al-Si Alloyed Cast Iron Coatings, Mater. Chem. Phys., 2006, 96, p 170–175.10.1016/j.matchemphys.2005.07.002 ↗
14. M. Yang, Y. Dai, C.J. Song and Q.J. Zhai, Microstructure Evolution of Grey Cast Iron Powder by High Pressure Gas Atomization, J. Mater. Process. Technol., 2010, 210, p 351–355.10.1016/j.jmatprotec.2009.09.023 ↗
15. I. Ohnaka, I. Yamauchi and S. Kawamoto, Production and Properties of Rapidly Solidified Al-4.5%Cu Alloy Powder by the Rotating-Water-Atomization Process, J. Mater. Sci., 1985, 20, p 2148–2158.10.1007/BF01112299 ↗
16. S. Cui, P. Zhou and C. Zhou, Overview of Thermal Spray Powder Properties, Sci. Technol. Inf., 2018, 29, p 66–68.
17. R. Freeman, Measuring the flow properties of Consolidated, Conditioned and Aerated Powders—A Comparative Study Using a Powder Rheometer and a Rotational Shear Cell, Powder Technol., 2007, 174, p 25–33.10.1016/j.powtec.2006.10.016 ↗
18. K. Ridgway and R. Rupp, The Effect of Particle Shape on Powder Properties, J. Pharm. Pharmacol., 2011, 21, p 30S-39S.10.1111/j.2042-7158.1969.tb08344.x ↗
19. F. Podczeck and Y. Miah, The Influence of Particle Size and Shape on the Angle of Internal Friction and the Flow Factor of Unlubricated and Lubricated Powders, Int. J. Pharmaceut., 1996, 144, p 187–194.10.1016/S0378-5173(96)04755-2 ↗
20. J.C. Feeley, P. York, B.S. Sumby and H. Dicks, Determination of Surface Properties and Flow Characteristics of Salbutamol Sulphate, Before and After Micronisation, Int. J. Pharmaceut., 1998, 172, p 89–96.10.1016/S0378-5173(98)00179-3 ↗
21. Y.C. Li, M.H. Song, Y. Zang, W.J. Zhang and Y. Wang, Influence of the Ball Mill Process on Titanium Alloy Powder Particle Size, Chem. Eng., 2017, 6, p 13–15. ((in Chinese))
22. D.Z. Yin, Z.M. Shi, Y.D. Zhang and X.W. Liu, Effect of Milling Technology on Mixed Powder of Copper Based Friction Material I: Particle Size Distribution, Powder Metall. Technol., 2016, 34, p 444–449. ((in Chinese))
23. B.Q. Hu, Y.Z. Wang and J.C. Niu, Effect of Ball Powder Ratio on Characterization of Mechanical Alloying Powder of Mo 10% Cu, Found. Equip. Technol, 2016, 1, p 30–32. ((in Chinese))
24. L.F. Chang, W. Wang and H.Q. Ru, Effect of Ball Milling Parameters on the Preparing Ultrafine WC Powders, J. Mater. Metall., 2018, 18, p 207–212. ((in Chinese))
25. M. Ellart, N. Azeggagh, C. Ablitzer, A. Ndiaye and A.-C. Robisson, Influence of Ball Milling on the Characteristics of Uranium Powders and on the Resistance of Pressed Green Pellets, Ceram. Int., 2020, 46, p 21402–21409.10.1016/j.ceramint.2020.05.238 ↗
26. T. Allen, Particle Size Measurement, Springer, London, 1976.
27. Z.J. Ren, Particle Uniformity Level Expression, B. Chin. Ceram. Soc., 1998, 18, p 12–14. ((in Chinese))
28. B.B. Mandelbrot, The fractal geometry of nature, Comput. Geosci., 1984, 91, p 594–598.
29. N. Sarkar and B.B. Chaudhuri, An efficient approach to estimate fractal dimension of textural images, Pattern Recogn., 1992, 25, p 1035–1041.10.1016/0031-3203(92)90066-R ↗
30. J.J. Gagnepain and C. Roques-Carmes, Fractal approach to two-dimensional and three-dimensional surface roughness, Wear, 1986, 109, p 119–126.10.1016/0043-1648(86)90257-7 ↗
31. J.M. Keller, Texture Description and Segmentation Through Fractal Geometry, Academic Press Professional Inc, New York, 1989.10.1016/0734-189X(89)90130-8 ↗
32. B.B. Chaudhuri and N. Sarkar, Texture Segmentation Using Fractal Dimension, Comput. Vis. Gr. Image Process., 2002, 17, p 72–77.
33. J. Li, Q. Du and C.X. Sun, An Improved Box-Counting Method for Image Fractal Dimension Estimation, Pattern Recogn., 2009, 42, p 2460–2469.10.1016/j.patcog.2009.03.001 ↗
34. S.Y. Jin and H.Q. Ye, Fractal Dimension to Characterize Surface Topography of Flaky Powders, Chin. J. Process Eng., 2004, 4, p 335–339. ((In Chinese))
35. H. Chen and C.X. Ding, Nanostructured Zirconia Coating Prepared by Atmospheric Plasma Spraying, Surf. Coat. Technol., 2002, 150, p 31–36.10.1016/S0257-8972(01)01525-0 ↗
36. Y.Z. Xing, Q.L. Wei and J.M. Hao, The Fracture Toughness of Alumina Coatings Plasma-Sprayed at Different In Situ Temperatures, Ceram. Int., 2012, 38, p 4661–4667.10.1016/j.ceramint.2012.02.048 ↗
37. X.T. Luo, G.J. Yang and C.J. Li, Preparation of cBNp/NiCrAl Nanostructured Composite Powders by A Step-Fashion Mechanical Alloying Process, Powder Technol., 2012, 217, p 591–598.10.1016/j.powtec.2011.11.029 ↗
38. J.C. Cai, B.M. Yu, M.Q. Zou and M.F. Mei, Fractal Analysis of Surface Roughness of Particles in Porous Media, Chin. Phys. Lett., 2010, 27, p 0247051–0247054.10.1088/0256-307X/27/12/124501 ↗
39. W. Wang, The Application of Fractal Theory in Surface Roughness Non-Contact Measurement, Jilin Universty, Changchun, 2006.
40. M.E. Shaibani and M. Ghambari, Characterization and Comparison of Gray Cast Iron Powder Produced by Target Jet Milling and High Energy Ball Milling of Machining Scraps, Powder Technol., 2011, 212, p 278–283.10.1016/j.powtec.2011.06.002 ↗
41. S.S. Lv, T. Gu, W.J. Tang, H.J. Ni and X.X. Wang, Optimization of plasma spraying technical parameters for ultimate aluminum ash coating, Mod. Chem. Ind., 2018, 38, p 104–108. ((in Chinese))
42. G.Z. Hao, C.H. Wang, J.H. Liu and G. Dong, Preparation and Properties of Modified Basalt Powder for Flame Spraying, Trans. Mater. Heat Treat., 2014, 35, p 191–196.
43. G.L. Xu, P. Lu, M.H. Li, C. Liang, P. Xu, D.Y. Liu and X.P. Chen, Investigation on characterization of powder flowability using different testing methods, Exp. Therm. Fluid Sci., 2018, 92, p 390–401.10.1016/j.expthermflusci.2017.11.008 ↗
44. S.V. Søgaard, N.E. Olesen, C. Hirschberg, M.H. Madsen, M. Allesø, J. Garnaes and J. Rantancn, An experimental Evaluation of Powder Flow Predictions in Small-Scale Process Equipment Based on Jenike’s Hopper Design Methodology, Powder Technol., 2017, 321, p 523–532.10.1016/j.powtec.2017.08.006 ↗
45. T. Baxter,R. Barnum, J.K.Prescott, Flow: general principles of bulk solids handing, in: L.L. Augsburger, S.W. Hoag (EDS), New York, 2008.10.3109/9781420020281-4 ↗
46. D. Schulze, J. Schwedes and J.W. Carson, Powders and Bulk Solids, Behavior, Characterization, Storage and Flow, Springer, Berlin, 2017.
47. C. Xing, T. Ding, H.D. Zhou, Z. Li and L. Wen, Influence of Size and Shape Distribution on the Flowability of Particles Emitted during Panel Cutting and Paint Sanding, Sci. Silvan Sin., 2018, 54, p 142–148.
48. Y. Liu, H. Lu, M. Poletto, X. Guo, X. Gong and Y. Jin, Flow Properties and Inter-Particle Forces in Fuel Powders, Particuology, 2017, 34, p 24–38.10.1016/j.partic.2016.10.007 ↗
49. M.M. Kanafi and A.J. Tuononen, Top Topography Surface Roughness Power Spectrum for Pavementfriction Evaluation, Tribol. Int., 2017, 107, p 240–249.10.1016/j.triboint.2016.11.038 ↗
50. C. Wang, R. Ma, J. Zhao and J. Zhao, Calculation Method and Experimental Study of Coulomb Friction Coefficient in Sheet Metal Forming, J. Manuf. Process., 2017, 27, p 126–213.10.1016/j.jmapro.2017.02.016 ↗
51. W.C. Shen, L. Zhu, T. Hou and Y.J. Liu, Trend and Prospect of a Study on GICS MATERIALS, Carbon Techn., 1993, 5, p 22–28. ((in Chinese))