journal article·2024-03

Erosion Behavior of Cold-Sprayed Coatings Made of CoCrFeMnNi HEA and Tungsten Carbide Nanoparticles in a Nickel Matrix

Giacomo Cappelli, Arnoldas Sasnauskas, Shuo Yin, Rocco Lupoi

Journal of Thermal Spray Technology· Volume 33· Issue 2-3
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. C.P. Paul, S.K. Mishra, P. Tiwari and L.M. Kukreja, Solid-Particle Erosion Behaviour of WC/Ni Composite Clad Layers with Different Contents of WC Particles, Opt. Laser Technol., 2013, 50, p 155-162. https://doi.org/10.1016/j.optlastec.2013.03.00210.1016/j.optlastec.2013.03.002 ↗
2. K. Van Acker, D. Vanhoyweghen, R. Persoons and J. Vangrunderbeek, Influence of Tungsten Carbide Particle Size and Distribution on the Wear Resistance of Laser Clad WC/Ni Coatings, Wear, 2005, 258(1–4), p 194-202.10.1016/j.wear.2004.09.041 ↗
3. L. Du, B. Xu, S. Dong, W. Zhang, J. Zhang, H. Yang and H. Wang, Sliding Wear Behavior of the Supersonic Plasma Sprayed WC-Co Coating in Oil Containing Sand, Surf. Coatings Technol., 2008, 202(15), p 3709-3714.10.1016/j.surfcoat.2008.01.009 ↗
4. J.R.T. Branco, R. Gansert, S. Sampath, C.C. Berndt and H. Herman, Solid Particle Erosion of Plasma Sprayed Ceramic Coatings, Mater. Res., 2004, 7(1), p 147-153.10.1590/S1516-14392004000100020 ↗
5. Y. Lian and Y. Li, Investigation on Erosion Resistance of WC–Co–Cr Coatings, Tribol. Online, 2018, 13(2), p 36-42.10.2474/trol.13.36 ↗
6. S.G. Sapate, N. Tangselwar, S.N. Paul, R.C. Rathod, S. Mehar, D.S. Gowtam and M. Roy, Effect of Coating Thickness on the Slurry Erosion Resistance of HVOF-Sprayed WC-10Co-4Cr Coatings, J Thermal Spray Technol, 2021, 30, p 1365-1379. https://doi.org/10.1007/s11666-021-01190-210.1007/s11666-021-01190-2 ↗
7. J. Tang, G.C. Saha, P. Richter, J. Kondás, A. Colella and P. Matteazzi, Effects of Post-Spray Heat Treatment on Hardness and Wear Properties of Ti-WC High-Pressure Cold Spray Coatings, J. Therm. Spray Technol., 2018, 27(7), p 1153-1164.10.1007/s11666-018-0762-7 ↗
8. M. Kazasidis, E. Verna, S. Yin and R. Lupoi, The Effect of Heat Treatment and Impact Angle on the Erosion Behavior of Nickel-Tungsten Carbide Cold Spray Coating Using Response Surface Methodology, Emerg Mater, 2021, 4(6), p 1605-1618.10.1007/s42247-021-00274-7 ↗
9. S.J. McMaster, T.W. Liskiewicz, A. Neville and B.D. Beake, Probing Fatigue Resistance in Multi-Layer DLC Coatings by Micro-and Nano-Impact: Correlation to Erosion Tests, Surf. Coat. Technol., 2020, 402, p 126319. https://doi.org/10.1016/j.surfcoat.2020.12631910.1016/j.surfcoat.2020.126319 ↗
10. N. Okimura, J. Choi, W. Nakayama, N. Ata, Y. Hirata, N. Ohtake and H. Akasaka, Metal Matrix Composites Using Diamond-like Carbon-Coated Particles Fabricated by Cold Spray Technique, J Thermal Spray Technol, 2020, 29, p 1660-1668. https://doi.org/10.1007/s11666-020-01071-010.1007/s11666-020-01071-0 ↗
11. V.K. Champagne, The Cold Spray Materials Deposition Process: Fundamentals and Applications, The Cold Spray Materials Deposition Process: Fundamentals and Applications, (2007)10.1201/9781439824122 ↗
12. G. Motors, S.N. Laborato-, and F.M. Company, Cold Spray Technology, (n.d)
13. R.T. Sataloff, M.M. Johns, and K.M. Kost, Modern Cold Spray, Springer, (2015)
14. S. Rahmati, R.G.A. Veiga, A. Zúñiga and B. Jodoin, A Numerical Approach to Study the Oxide Layer Effect on Adhesion in Cold Spray, J. Therm. Spray Technol., 2021, 30(7), p 1777-1791.10.1007/s11666-021-01245-4 ↗
15. S.A. Alidokht and R.R. Chromik, Sliding Wear Behavior of Cold-Sprayed Ni-WC Composite Coatings: Influence OF WC Content, Wear, 2021, 477, p 203792. https://doi.org/10.1016/j.wear.2021.20379210.1016/j.wear.2021.203792 ↗
16. S. Yin, E.J. Ekoi, T.L. Lupton, D.P. Dowling and R. Lupoi, Cold Spraying of WC-Co-Ni Coatings Using Porous WC-17Co Powders: Formation Mechanism, Microstructure Characterization and Tribological Performance, Mater. Des., 2017, 126, p 305-313. https://doi.org/10.1016/j.matdes.2017.04.04010.1016/j.matdes.2017.04.040 ↗
17. R.G. Rateick, K.R. Karasek, A.J. Cunningham, K.C. Goretta and J.L. Routbort, Solid-Particle Erosion of Tungsten Carbide/Cobalt Cermet and Hardened 440C Stainless Steel-A Comparison, Wear, 2006, 261(7–8), p 773-778.10.1016/j.wear.2006.01.012 ↗
18. M. Bromark, P. Hedenqvist, and S. Hogmark, Coated Tool Steels, Science 186187, 189-194 (1995)10.1016/0043-1648(95)07163-6 ↗
19. E. Bousser, L. Martinu and J.E. Klemberg-Sapieha, Solid Particle Erosion Mechanisms of Protective Coatings for Aerospace Applications, Surf. Coat. Technol., 2014, 257, p 165-181.10.1016/j.surfcoat.2014.08.037 ↗
20. I.M. Hutchings, Ductile-Brittle Transitions and Wear Maps for the Erosion and Abrasion of Brittle Materials, J. Phys. D Appl. Phys., 1992, 25(1), p A212-A221.10.1088/0022-3727/25/1A/033 ↗
21. G.L. Sheldon and I. Finnie, On the Ductile Behavior of Nominally Brittle Materials during Erosive Cutting, J. Manuf. Sci. Eng. Trans. ASME, 1966, 88(4), p 387-392.10.1115/1.3672666 ↗
22. J. Menghani, A. Vyas, P. Patel, H. Natu and S. More, Wear, Erosion And Corrosion Behavior of Laser Cladded High Entropy Alloy Coatings–A Review, Mater Today: Proceed, 2021, 38, p 2824-2829. https://doi.org/10.1016/j.matpr.2020.08.76310.1016/j.matpr.2020.08.763 ↗
23. R.B. Nair, K. Selvam, H.S. Arora, S. Mukherjee, H. Singh and H.S. Grewal, Slurry Erosion Behavior of High Entropy Alloys, Wear, 2017, 386, p 230-238. https://doi.org/10.1016/j.wear.2017.01.02010.1016/j.wear.2017.01.020 ↗
24. J. Xu, S. Peng, Z. Li, S. Jiang, Z.H. Xie, P. Munroe and H. Lu, Remarkable Cavitation Erosion–Corrosion Resistance of CoCrFeNiTiMo High-Entropy Alloy Coatings, Corros. Sci., 2021, 190, p 109663. https://doi.org/10.1016/j.corsci.2021.10966310.1016/j.corsci.2021.109663 ↗
25. F. Ghadami, M.A. Davoudabadi, and S. Ghadami, Cyclic Oxidation Properties of the Nanocrystalline AlCrFeCoNi High-Entropy Alloy Coatings Applied by the Atmospheric Plasma Spraying Technique. Coatings, 12(3) (2022)10.3390/coatings12030372 ↗
26. C.J. Akisin, C.J. Bennett, F. Venturi, H. Assadi and T. Hussain, Numerical and Experimental Analysis of the Deformation Behavior of CoCrFeNiMn High Entropy Alloy Particles onto Various Substrates During Cold Spraying, J Thermal Spray Technol, 2022, 31(4), p 1085-1111. https://doi.org/10.1007/s11666-022-01377-110.1007/s11666-022-01377-1 ↗
27. R. Nikbakht, C.V. Cojocaru, M. Aghasibeig, É. Irissou, T.S. Kim, H.S. Kim and B. Jodoin, Cold Spray and Laser-Assisted Cold Spray of CrMnCoFeNi High Entropy Alloy Using Nitrogen as the Propelling Gas, J. Therm. Spray Technol., 2022, 31(4), p 1129-1142.10.1007/s11666-022-01361-9 ↗
28. J.E. Ahn, Y.K. Kim, S.H. Yoon and K.A. Lee, Tuning the Microstructure and Mechanical Properties of Cold Sprayed Equiatomic CoCrFeMnNi High-Entropy Alloy Coating Layer, Metals Mater Int, 2021, 27, p 2406-2415. https://doi.org/10.1007/s12540-020-00886-410.1007/s12540-020-00886-4 ↗
29. J. Mahaffey, A. Vackel, S. Whetten, M. Melia and A.B. Kustas, Structure Evolution and Corrosion Performance of CoCrFeMnNi High Entropy Alloy Coatings Produced Via Plasma Spray and Cold Spray, J Thermal Spray Technol, 2022, 31(4), p 1143-1154.10.1007/s11666-022-01373-5 ↗
30. Z. Zeng, M. Xiang, D. Zhang, J. Shi, W. Wang, X. Tang and K. Morita, Mechanical Properties of Cantor Alloys Driven by Additional Elements: A Review, J Mater Res Technol, 2021, 15, p 1920-1934. https://doi.org/10.1016/j.jmrt.2021.09.01910.1016/j.jmrt.2021.09.019 ↗
31. F. Otto, A. Dlouhý, C. Somsen, H. Bei, G. Eggeler and E.P. George, The Influences of Temperature and Microstructure on the Tensile Properties of a CoCrFeMnNi High-Entropy Alloy, Acta Mater., 2013, 61(15), p 5743-5755.10.1016/j.actamat.2013.06.018 ↗
32. B. Schuh, F. Mendez-Martin, B. Völker, E.P. George, H. Clemens, R. Pippan and A. Hohenwarter, Mechanical Properties, Microstructure and Thermal Stability of a Nanocrystalline CoCrFeMnNi High-Entropy Alloy after Severe Plastic Deformation, Acta Mater., 2015, 96, p 258-268.10.1016/j.actamat.2015.06.025 ↗
33. L. Baiamonte, G. Pulci, A. Gisario, L. Paglia, A.L. Marino, M. Tului and F. Marra, WC-Ti Coatings Deposited Via Cold Gas Spray and Modified by Laser and Furnace Heat Treatments, J Thermal Spray Technol, 2021, 30, p 2083-2098. https://doi.org/10.1007/s11666-021-01278-910.1007/s11666-021-01278-9 ↗
34. S.A. Alidokht, P. Vo, S. Yue and R.R. Chromik, Cold Spray Deposition of Ni and WC-Reinforced Ni Matrix Composite Coatings, J. Therm. Spray Technol., 2017, 26(8), p 1908-1921.10.1007/s11666-017-0636-4 ↗
35. ISO 113581, International Standard ITeh Standard ITeh Standard Preview, Int. Organ. Stand., p 3-6 (2015)
36. C. Wei, Z. Liu, Y. Bao, D. Wan, Y. Qiu and X. Liu, Evaluating Thermal Expansion Coefficient and Density of Ceramic Coatings by Relative Method, Mater. Lett., 2015, 161, p 542-544. https://doi.org/10.1016/j.matlet.2015.09.03410.1016/j.matlet.2015.09.034 ↗
37. H.Z. Li, J. Wang and J.M. Fan, Analysis and Modelling of Particle Velocities in Micro-Abrasive Air Jet, Int J Machine Tools Manuf, 2009, 49(11), p 850-858. https://doi.org/10.1016/j.ijmachtools.2009.05.01210.1016/j.ijmachtools.2009.05.012 ↗
38. B.J. Connolly, E. Loth and C.F. Smith, Drag and Bounce of Irregular Particles and Test Dust, AIAA Propuls. Energy Forum Expo., 2019, 2019(363), p 275-285.
39. Astm, G76-07, Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets, ASTM Int., pp 1-6 (2013)
40. R.C. Dykhuizen and M.F. Smith, Gas Dynamic Principles of Cold Spray, J. Therm. Spray Technol., 1998, 7(2), p 205-212.10.1361/105996398770350945 ↗
41. M. Grujicic, C.L. Zhao, C. Tong, W.S. DeRosset and D. Helfritch, Analysis of the Impact Velocity of Powder Particles in the Cold-Gas Dynamic-Spray Process, Mater. Sci. Eng. A, 2004, 368(1–2), p 222-230.10.1016/j.msea.2003.10.312 ↗
42. S. Yin, M. Meyer, W. Li, H. Liao and R. Lupoi, Gas Flow, Particle Acceleration, and Heat Transfer in Cold Spray: A Review, J Thermal Spray Technol, 2016, 25, p 874-896.10.1007/s11666-016-0406-8 ↗
43. A.P. Alkhimov, V.F. Kosarev and S.V. Klinkov, The Features of Cold Spray Nozzle Design, J. Therm. Spray Technol., 2001, 10(2), p 375-381.10.1361/105996301770349466 ↗
44. V.K. Champagne, D.J. Helfritch, S.P.G. Dinavahi and P.F. Leyman, Theoretical and Experimental Particle Velocity in Cold Spray, J. Therm. Spray Technol., 2011, 20(3), p 425-431.10.1007/s11666-010-9530-z ↗
45. W.Y. Li, H. Liao, G. Douchy and C. Coddet, Optimal Design of a Cold Spray Nozzle by Numerical Analysis of Particle Velocity and Experimental Validation with 316L Stainless Steel Powder, Mater. Des., 2007, 28(7), p 2129-2137.10.1016/j.matdes.2006.05.016 ↗
46. W. Li, H. Assadi, F. Gaertner and S. Yin, A Review of Advanced Composite and Nanostructured Coatings by Solid-State Cold Spraying Process, Critic Rev Solid State Mater Sci, 2019, 44(2), p 109-156. https://doi.org/10.1080/10408436.2017.141077810.1080/10408436.2017.1410778 ↗
47. S. Özbilen, Satellite Formation Mechanism in Gas Atomized Powders, Powder Metall., 1999, 42(1), p 70-78.10.1179/pom.1999.42.1.70 ↗
48. S.A. Alidokht, P. Vo, S. Yue and R.R. Chromik, Erosive Wear Behavior of Cold-Sprayed Ni-WC Composite Coating, Wear, 2017, 376, p 566-577. https://doi.org/10.1016/j.wear.2017.01.05210.1016/j.wear.2017.01.052 ↗
49. Y. Qian and Z. Zhao, Microstructure and Properties of Ultrafine Cemented Carbides Prepared by Microwave Sintering of Nanocomposites, Crystals, 2020, 10(6), p 507.10.3390/cryst10060507 ↗
50. M. Kazasidis, E. Verna, S. Yin, and R. Lupoi, Investigation of the Effect of Low-Temperature Annealing and Impact Angle on the Erosion Performance of Nickel-Tungsten Carbide Cold Spray Coating Using Design of Experiments. In ITSC2022 (pp 763-772). ASM International10.31399/asm.cp.itsc2022p0763 ↗
51. S. Yin, X.F. Wang, W.Y. Li and H.E. Jie, Effect of Substrate Hardness on the Deformation Behavior of Subsequently Incident Particles in Cold Spraying, Appl. Surf. Sci., 2011, 257(17), p 7560-7565.10.1016/j.apsusc.2011.03.126 ↗
52. S. Bagherifard, J. Kondas, S. Monti, J. Cizek, F. Perego, O. Kovarik and M. Guagliano, Tailoring Cold Spray Additive Manufacturing of Steel 316 L for Static and Cyclic Load-Bearing Applications, Mater. Des., 2021, 203, p 109575. https://doi.org/10.1016/j.matdes.2021.10957510.1016/j.matdes.2021.109575 ↗
53. S. Yin, J. Cizek, X. Yan and R. Lupoi, Annealing Strategies for Enhancing Mechanical Properties of Additively Manufactured 316L Stainless Steel Deposited by Cold Spray, Surf. Coat. Technol., 2019, 370, p 353-361. https://doi.org/10.1016/j.surfcoat.2019.04.01210.1016/j.surfcoat.2019.04.012 ↗
54. S. Yin, W. Li, B. Song, X. Yan, M. Kuang, Y. Xu and R. Lupoi, Deposition of FeCoNiCrMn High Entropy Alloy (HEA) Coating via Cold Spraying, J. Mater. Sci. Technol., 2019, 35(6), p 1003-1007. https://doi.org/10.1016/j.jmst.2018.12.01510.1016/j.jmst.2018.12.015 ↗
55. S.A. Alidokht, J. Lengaigne, J.E. Klemberg-Sapieha, S. Yue and R.R. Chromik, Effect of Microstructure and Properties of Ni-WC Composite Coatings on Their Solid Particle Erosion Behavior, J. Mater. Eng. Perform., 2019, 28, p 1532-1543. https://doi.org/10.1007/s11665-019-03956-w10.1007/s11665-019-03956-w ↗
56. H. Oettel and R. Wiedemann, Residual Stresses in PVD Hard Coatings, Surf Coatings Technol, 1995, 76, p 265-273. https://doi.org/10.1016/0257-8972(95)02581-210.1016/0257-8972(95)02581-2 ↗
57. T. Suhonen, T. Varis, S. Dosta, M. Torrell and J.M. Guilemany, Residual Stress Development in Cold Sprayed Al Cu and Ti Coatings, Acta Mater., 2013, 61(17), p 6329-6337. https://doi.org/10.1016/j.actamat.2013.06.03310.1016/j.actamat.2013.06.033 ↗
58. S.H. Zahiri, C.I. Antonio, and M. Jahedi, Elimination of Porosity in Directly Fabricated Titanium via Cold Gas Dynamic Spraying, (2008)10.1016/j.jmatprotec.2008.03.005 ↗