Numerical and Experimental Investigation for Application of CoNiCrAlY Coatings by HVAF
Source abstract
Abstract
Abstract A relatively small change in oxide content and microstructure in MCrAlY coatings (M = Co, Ni) can affect the functionality of the coating for oxidation protection or as a bond coat. The objective of this study is to fabricate a CoNiCrAlY coating with low porosity and low oxide content. The high velocity air-fuel (HVAF) process, with its relatively low process temperature, is particularly suitable for the deposition of spray materials that are susceptible to oxidation or degradation at high temperature. A CFD simulation model of HVAF process is developed to determine the process parameters for fabricating CoNiCrAlY coating. The simulation results are validated by particle diagnostics, thereby establishing a comprehensive understanding of the underlying process. To assess the coating microstructure, XRD and EDS analyses as well as observation of cross sections of the coatings are conducted. The results highlight the influence of various factors, such as the variation of carrier gas and particle size distribution, on the quality of the coatings. Consequently, the utilization of simulation-based process parameter development is well supported by the coating fabrications, offering valuable insights into the processes prior to implementation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. T. Mori, S. Kuroda, H. Murakami, H. Katanoda, Y. Sakamoto, and S. Newman, Effects of initial oxidation on β phase depletion and oxidation of CoNiCrAlY bond coatings fabricated by warm spray and HVOF processes, Surf. Coat. Technol., 2013, 221, p 59-69.10.1016/j.surfcoat.2013.01.028 ↗
2. D. Naumenko, R. Pillai, A. Chyrkin, and W.J. Quadakkers, Overview on recent developments of bondcoats for plasma-sprayed thermal barrier coatings, J. Therm. Spray Technol., 2017, 26(8), p 1743-1757.10.1007/s11666-017-0649-z ↗
3. P. Richer, M. Yandouzi, L. Beauvais, and B. Jodoin, Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying, Surf. Coat. Technol., 2010, 204(24), p 3962-3974.10.1016/j.surfcoat.2010.03.043 ↗
4. T. Koomparkping, S. Damrongrat, and P. Niranatlumpong, Al-rich precipitation in CoNiCrAlY bondcoat at high temperature, J. Therm. Spray Technol., 2005, 14(2), p 264-267.10.1361/10599630523845 ↗
5. G. Mauer, D. Sebold, and R. Vaßen, MCrAlY bondcoats by high-velocity atmospheric plasma spraying, J. Therm. Spray Technol., 2014, 23(1), p 140-146.10.1007/s11666-013-0026-5 ↗
6. F.R. Caliari, F.S. Miranda, D.A.P. Reis, A.M. Essiptchouk, and G.P. Filho, Supersonic plasma spray deposition of CoNiCrAlY coatings on Ti-6Al-4V alloy, J. Therm. Spray Technol., 2017, 26(5), p 880-889.10.1007/s11666-017-0563-4 ↗
7. W.R. Chen, E. Irissou, X. Wu, J.-G. Legoux, and B.R. Marple, The oxidation behavior of TBC with cold spray CoNiCrAlY bond coat, J. Therm. Spray Technol., 2011, 20(1), p 132-138.10.1007/s11666-010-9601-1 ↗
8. C.-J. Li and W.-Y. Li, Effect of sprayed powder particle size on the oxidation behavior of MCrAlY materials during high velocity oxygen-fuel deposition, Surf. Coat. Technol., 2003, 162(1), p 31-41.10.1016/S0257-8972(02)00573-X ↗
9. W.R. Chen, Degradation of a TBC with HVOF-CoNiCrAlY bond coat, J. Therm. Spray Technol., 2014, 23(5), p 876-884.10.1007/s11666-014-0095-0 ↗
10. H.-R. Jiang, M.-L. Li, X.-S. Wei, T.-C. Ma, Y. Dong, C.-X. Ying, Z.-Y. Liao, and J. Shen, Numerical investigation of in-flight behavior of Fe-based amorphous alloy particles in AC-HVAF thermal spray process, J. Therm. Spray Technol., 2019, 28(6), p 1146-1159.10.1007/s11666-019-00889-7 ↗
11. F. Liu, Z. Li, M. Fang, and H. Hou, Numerical analysis of the activated combustion high-velocity air-fuel spraying process: a three-dimensional simulation with improved gas mixing and combustion mode, Materials, 2021, 14(3), p 657.10.3390/ma14030657 ↗
12. X. Gao, C. Li, Y. Xu, X. Chen, and X. Han, Effects of fuel types and process parameters on the performance of an activated combustion high velocity air-fuel (AC-HVAF) thermal spray system, J. Therm. Spray Technol., 2021, 30(7), p 1875-1890.10.1007/s11666-021-01250-7 ↗
13. X. Gao, C. Li, D. Zhang, H. Gao, and X. Han, Numerical analysis of the activated combustion high-velocity air-fuel (AC-HVAF) thermal spray process: a survey on the parameters of operation and nozzle geometry, Surf. Coat. Technol., 2021, 405, p 126588.10.1016/j.surfcoat.2020.126588 ↗
14. X. Han, C. Li, X. Gao, X. Chen, and Z. Liu, Numerical study on the behavior of titanium particles in the process of warm spraying, Weld. World, 2022, 66(7), p 1305-1314.10.1007/s40194-022-01292-7 ↗
15. G. Mauer, K.-H. Rauwald, and R. Vaßen, The potential of high velocity air fuel spraying (HVAF) to manufacture bond coats in thermal barrier coating systems, in: Thermal Spray 2023: Proceedings from the International Thermal Spray Conference (2023), pp. 625-632.10.31399/asm.cp.itsc2023p0625 ↗
16. K. Bobzin, H. Heinemann, and K. Jasutyn, Correlation between process parameters and particle in-flight behavior in AC-HVAF, J. Therm. Spray Technol., 2023, 32(2), p 559-567.10.1007/s11666-023-01543-z ↗
17. S. Gordon and B.J. McBride, Computer program for calculation of complex chemical equilibrium compositions, rocket performance, incident and reflected shocks, and Chapman-Jouguet detonations. Scientific and Technical Information Office National Aeronautics and Space Administration; [for sale by the National Technical Information Service Springfield Va.] (1971)
18. M. Vardelle, A. Vardelle, P. Fauchais, and M.I. Boulos, Plasma—particle momentum and heat transfer: modelling and measurements, AIChE J., 1983, 29(2), p 236-243.10.1002/aic.690290210 ↗
19. G.A. Hughmark, Mass and heat transfer from rigid spheres, AIChE J., 1967, 13(6), p 1219-1221.10.1002/aic.690130638 ↗
20. P. Richer, A. Zúñiga, M. Yandouzi, and B. Jodoin, Conicraly microstructural changes induced during cold gas dynamic spraying, Surf. Coat. Technol., 2008, 203(3), p 364-371.10.1016/j.surfcoat.2008.09.014 ↗