journal article·2025-02

Microstructure and Wear Performance of Inconel 718 Composite Coatings Reinforced with Multi-size and Content WC-Co Fabricated by Laser Cladding

Lu Xu, Lida Zhu, Miao Yu, Jinsheng Ning, Zhichao Yang, Zongze Jiang, Peihua Xu, Shaoqing Qin, Chenglong Zhai

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. W. Zhang, H. Xie, Z. Ma, H. Zhao, and L. Ren, Graphene Oxide-Induced Substantial Strengthening of High-Entropy Alloy Revealed by Micropillar Compression and Molecular Dynamics Simulation. Research, vol. 2022, (2022)10.34133/2022/9839403 ↗
2. A.K. Praharaj, J.K. Chaurasia, G.R. Chandan, S. Bontha, and P.S. Suvin, Enhanced Tribological Performance of Laser Directed Energy Deposited Inconel 625 Achieved Through Laser Surface Remelting, Surface Coat. Technol., 2024, 477, p 130345.10.1016/j.surfcoat.2023.130345 ↗
3. M. Yu, L. Zhu, J. Ning, Z. Yang, Z. Jiang, L. Xu, Y. Wang, G. Meng, and Y. Huang, Machine Vision and Novel Attention Mechanism TCN for Enhanced Prediction of Future Deposition Height in Directed Energy Deposition, Mech. Syst. Signal Process., 2024, 216, p 111492.10.1016/j.ymssp.2024.111492 ↗
4. J. Ning, L. Zhu, S. Wang, Z. Yang, P. Xu, P. Xue, H. Lu, M. Yu, Y. Zhao, J. Li, S. Bose, and A. Bandyopadhyay, Printability Disparities in Heterogeneous Material Combinations Via Laser Directed Energy Deposition: A Comparative Study, Int. J. Extreme Manuf., 2024, 6(2), p 025001.10.1088/2631-7990/ad172f ↗
5. N. Xu, R. Kang, B. Zhang, Y. Zhang, C. Wang, Y. Bao, and Z. Dong, Improving Fatigue Properties of Normal Direction Ultrasonic Vibration Assisted Face Grinding Inconel 718 by Regulating Machined Surface Integrity, Int. J. Extreme Manuf., 2024, 6(3), p 035101.10.1088/2631-7990/ad33aa ↗
6. S. Wu, Z. Liu, Y. Gong, X. Liang, Y. Wu, and X. Zhao, Analysis of the Sequentially Coupled Thermal–Mechanical and Cladding Geometry of a Ni60A-25 %WC Laser Cladding Composite Coating, Opt. Laser Technol., 2023, 167, p 109595.10.1016/j.optlastec.2023.109595 ↗
7. Z. Li, J. Chen, S. Sui, C. Zhong, X. Lu, and X. Lin, The Microstructure Evolution and Tensile Properties of Inconel 718 Fabricated by High-Deposition-Rate Laser Directed Energy Deposition, Addit. Manuf., 2020, 31, p 100941.
8. Q. Yin, Z. Liu, B. Wang, Q. Song, and Y. Cai, Recent Progress of Machinability and Surface Integrity for Mechanical Machining Inconel 718: A Review, Int. J. Adv. Manuf. Technol., 2020, 109, p 215-245.10.1007/s00170-020-05665-4 ↗
9. M. Yu, L. Zhu, Z. Yang, and J. Ning, In-Situ Monitoring and Innovative Feature Fusion Neural Network for Enhanced Laser Directed Energy Deposition Track Geometry Prediction and Control, IEEE Trans. Instrum. Meas., 2024, 73, p 1-10.
10. S. Wang, L. Zhu, Y. Dun, Z. Yang, J.Y.H. Fuh, and W. Yan, Multi-physics Modeling of Direct Energy Deposition Process of Thin-Walled Structures: Defect Analysis, Comput. Mech., 2021, 67(4), p 1229-1242.10.1007/s00466-021-01992-9 ↗
11. Y.F. Yan, S.Q. Kou, H.Y. Yang, S.L. Shu, F. Qiu, Q.C. Jiang, and L.C. Zhang, Ceramic Particles Reinforced Copper Matrix Composites Manufactured by Advanced Powder Metallurgy: Preparation, Performance, and Mechanisms, Int. J. Extreme Manuf., 2023, 5(3), p 032006.10.1088/2631-7990/acdb0b ↗
12. H. Fang, R. Chen, Y. Yang, Y. Su, H. Ding, and J. Guo, Effects of Tantalum on Microstructure Evolution and Mechanical Properties of High-Nb TiAl Alloys Reinforced by Ti2 AlC, Research, 2019, 2019, p 5143179.
13. M. Rezaee Hajideh and M. Farahani, Direct Laser Metal Deposition Cladding of IN718 on DIN 1.2714 Tool Steel Reinforced by the SiC Nanoparticles, J. Mater. Res. Technol., 2023, 23, p 2020-2030.10.1016/j.jmrt.2023.01.107 ↗
14. G. Meng, L. Zhu, J. Zhang, Z. Yang, and P. Xue, Statistical Analysis and Multi-objective Process Optimization of Laser Cladding TiC-Inconel718 Composite Coating, Optik, 2021, 240, p 166828.10.1016/j.ijleo.2021.166828 ↗
15. H. Vasudev, L. Thakur, H. Singh, and A. Bansal, A Study on Processing and Hot Corrosion Behaviour of HVOF Sprayed Inconel718-Nano Al2O3 Coatings, Mater. Today Commun., 2020, 25, p 101626.10.1016/j.mtcomm.2020.101626 ↗
16. C. Guo, Z. Yu, C. Liu, X. Li, Q. Zhu, and R. Mark Ward, Effects of Y2O3 Nanoparticles on the High-Temperature Oxidation Behavior of IN738LC Manufactured by Laser Powder Bed Fusion, Corros. Sci., 2020, 171, p 108715.10.1016/j.corsci.2020.108715 ↗
17. M. Li, B. Han, Y. Wang, and K. Pu, Effects of La2O3 on the Microstructure and Property of Laser Cladding Ni-based Ceramic Coating, Optik, 2017, 130, p 1032-1037.10.1016/j.ijleo.2016.11.111 ↗
18. Q. Gao, W. Wang, G. Yi, S. Wan, Y. Shan, X. Feng, H. Sun, P. Shi, and Q. Cheng, Study on the Oxidation Behaviours and the Interactions between Friction and Oxidation of the Ni-based Composites with In-situ Carbides Reinforcement at 800 °C, Corros. Sci., 2022, 195, p 109987.10.1016/j.corsci.2021.109987 ↗
19. S.A. Alidokht and R.R. Chromik, Sliding Wear Behavior of Cold-Sprayed Ni-WC Composite Coatings: Influence OF WC Content, Wear, 2021, 477, p 203792.10.1016/j.wear.2021.203792 ↗
20. J. Chen, G. Lian, T. Lin, H. Lu, and Y. Wang, Effects of the Proportions of Carbon on the Microstructure and Properties of NbC-Reinforced Ni-WC Composite Coatings by Laser Cladding In-situ Synthesis, Mater. Today Commun., 2024, 38, p 107896.10.1016/j.mtcomm.2023.107896 ↗
21. G. Muvvala, D. Patra Karmakar, and A.K. Nath, In-process Detection of Microstructural Changes in Laser Cladding of In-situ Inconel 718/TiC Metal Matrix Composite Coating, J. Alloys Compd., 2018, 740, p 545-558.10.1016/j.jallcom.2017.12.364 ↗
22. H. Ding, Y. Cao, K. Hua, Y. Tong, N. Li, L. Sun, X. Li, H. Wu, and H. Wang, Fretting Wear Resistance at Ambient and Elevated Temperatures of 316 Stainless Steel Improved by Laser Cladding with Co-based Alloy/WC/CaF2 Composite Coating, Opt. Laser Technol., 2023, 163, p 109428.10.1016/j.optlastec.2023.109428 ↗
23. C. Chen, A. Feng, Y. Wei, Y. Wang, X. Pan, and X. Song, Effect of Multiple Laser Shock Peening on the Microstructure and Properties of Laser Cladding Nano-WC/Ni60 Composite Coatings, Opt. Laser Technol., 2023, 167, p 109719.10.1016/j.optlastec.2023.109719 ↗
24. X. Zhang, Q. Wang, Y. Deng, H. Chai, S. Hu, Y. Feng, Y. Xi, L. Dong, L. Lin, Y. Lin, and D. Zeng, Effect of Microstructure and Micromechanics on Wear/Wear-Corrosion Mechanism of Laser-Repaired Ni-WC Coating, Eng. Fail. Anal., 2024, 162, p 108337.10.1016/j.engfailanal.2024.108337 ↗
25. Q. Fan, H. Yang, J. Ge, S. Zhang, Z. Liu, B. Lei, T. Cheng, Y. Li, Y. Yin, and C. Gao, Customizable Ligand Exchange for Tailored Surface Property of Noble Metal Nanocrystals, Research, 2020, 2020, p 2131806.
26. J. Zhang, G. Meng, L. Zhu, Z. Yang, P. Xue, and P. Xu, Formation Mechanism and Mechanical Properties of TiC Reinforced Inconel 718 Composite Coatings by Laser Cladding on H13 Steel, Int. J. Adv. Manuf. Technol., 2022, 121(5–6), p 121.
27. J. Li, X. Cui, Y. Guan, G. Jin, W. Zheng, E. Liu, S. Wan, Z. Shi, and A. Liu, Effect of SiC Content on Microstructural Evolution and Tribology Properties of Laser-Clad TiC-Reinforced Ti-Al-Si Composite Coatings, Mater. Today Commun., 2023, 35, p 106019.10.1016/j.mtcomm.2023.106019 ↗
28. X. Shen, X. He, L. Gao, G. Su, C. Xu, and N. Xu, Study on Crack Behavior of Laser Cladding Ceramic-Metal Composite Coating with High Content of WC, Ceram. Int., 2022, 48(12), p 17460-17470.10.1016/j.ceramint.2022.03.010 ↗
29. T. Rong, D. Gu, Q. Shi, S. Cao, and M. Xia, Effects of Tailored Gradient Interface on Wear Properties of WC/Inconel 718 Composites using Selective Laser Melting, Surface Coat. Technol., 2016, 307, p 418-427.10.1016/j.surfcoat.2016.09.011 ↗
30. J. Yang, F. Liu, X. Miao, and F. Yang, Influence of Laser Cladding Process on the Magnetic Properties of WC–FeNiCr Metal–Matrix Composite Coatings, J. Mater. Process. Technol., 2012, 212(9), p 1862-1868.10.1016/j.jmatprotec.2012.04.009 ↗
31. T. Rong and D. Gu, Formation of Novel Graded Interface and Its Function on Mechanical Properties of WC1−x Reinforced Inconel 718 Composites Processed by Selective Laser Melting, J. Alloys Compd., 2016, 680, p 333-342.10.1016/j.jallcom.2016.04.107 ↗
32. L. De-sheng, C. Ke, F. Xiu-qing, K. Min, H. Zi-xuan, and W. Xian-fa, Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding, Int. J. Electrochem. Sci., 2021, 16(2), p 210233.10.20964/2021.02.54 ↗
33. P. Mukherjee, A. Gabourel, S.A. Firdosy, D.C. Hofmann, and A. Moridi, Additive Manufacturing of Functionally Gradient Refractory Coatings using Substrate Dilution and In-situ Carbide Formation, Mater. Sci. Eng. A, 2024, 891, p 145952.10.1016/j.msea.2023.145952 ↗
34. M.H. Nie, P.F. Jiang, Y.X. Zhou, Y.L. Li, and Z.H. Zhang, Studies on the 316/NiTi Functionally Gradient Ultra-Thick Coatings Fabricated with Directed Energy Deposition: Microstructure, Crystallography and Wear Mechanism, Appl. Surface Sci., 2023, 630, p 157497.10.1016/j.apsusc.2023.157497 ↗
35. S. Lu, L. Wang, J. Zhou, and J. Liang, Microstructure and Tribological Properties of Laser-Cladded Co-Ti3SiC2 Coating with Ni-based Interlayer on Copper Alloy, Tribol. Int., 2022, 171, p 107549.10.1016/j.triboint.2022.107549 ↗
36. K.N. Xue, H.F. Lu, K.Y. Luo, C.Y. Cui, J.H. Yao, F. Xing, and J.Z. Lu, Effects of Ni25 Transitional Layer on Microstructural Evolution and Wear Property of Laser Clad Composite Coating on H13 Tool Steel, Surface Coat. Technol., 2020, 402, p 126488.10.1016/j.surfcoat.2020.126488 ↗
37. M. Grandhi, V. Nguyen, Z. Liu, C.-O. Romo-De-La-cruz, and X. Song, Copper-Nickel Functionally Magnetic Gradient Material Fabricated Via Directed Energy Deposition, J. Manuf. Process., 2023, 100, p 47-54.10.1016/j.jmapro.2023.05.014 ↗
38. T. Wu, W. Shi, L. Xie, M. Gong, J. Huang, Y. Xie, and K. He, Study on the Effect of Ni60 Transition Coating on Microstructure and Mechanical Properties of Fe/WC Composite Coating by Laser Cladding, Opt. Laser Technol., 2023, 163, p 109387.10.1016/j.optlastec.2023.109387 ↗
39. D. Zhang, W. Liu, Y. Li, D. Sun, Y. Wu, S. Luo, S. Chen, Y. Tao, and B. Zhang, In situ Observation of Crystal Rotation in Ni-based Superalloy During Additive Manufacturing Process, Nat. Commun., 2023, 14(1), p 2961.10.1038/s41467-023-38727-8 ↗
40. S. Zhang, Y. Sun, W. Cheng, Y. Chen, J. Gu, and G. Chen, Microstructure and Tribological Behavior of CoCrFeNiMo0.2/SiC High-Entropy Alloy Gradient Composite Coating Prepared by Laser Cladding, Surface Coat. Technol., 2023, 467, p 129681.10.1016/j.surfcoat.2023.129681 ↗
41. Q. Wang, Q. Li, L. Zhang, D.X. Chen, H. Jin, J.D. Li, J.W. Zhang, and C.Y. Ban, Microstructure and Properties of Ni-WC Gradient Composite Coating Prepared by Laser Cladding, Ceram. Int., 2022, 48(6), p 7905-7917.10.1016/j.ceramint.2021.11.338 ↗
42. G. Tosun, Ni-WC Coating on AISI 1010 Steel Using TIG: Microstructure and Microhardness, Arab. J. Sci. Eng., 2014, 39(3), p 2097-2106.10.1007/s13369-013-0754-3 ↗
43. D. Shu, Z. Li, K. Zhang, C. Yao, D. Li, and Z. Dai, In Situ Synthesized High Volume Fraction WC Reinforced Ni-Based Coating by Laser Cladding, Mater. Lett., 2017, 195, p 178-181.10.1016/j.matlet.2017.02.076 ↗
44. K. Li, R. Ma, Y. Qin, N. Gong, J. Wu, P. Wen, S. Tan, D.Z. Zhang, L.E. Murr, and J. Luo, A Review of the Multi-dimensional Application of Machine Learning to Improve the Integrated Intelligence of Laser Powder Bed Fusion, J. Mater. Process. Technol., 2023, 318, p 118032.10.1016/j.jmatprotec.2023.118032 ↗
45. D. Hu, Y. Liu, H. Chen, J. Liu, M. Wang, and L. Deng, Microstructure and Properties of Ta-Reinforced NiCuBSi + WC Composite Coating Deposited on 5Cr5MoSiV1 Steel Substrate by Laser Cladding, Opt. Laser Technol., 2021, 142, p 107210.10.1016/j.optlastec.2021.107210 ↗
46. K. Huo, J. Zhou, F. Dai, and J. Xu, Particle Distribution and Microstructure of IN718/WC Composite Coating Fabricated by Electromagnetic Compound Field-Assisted Laser Cladding, Appl. Surface Sci., 2021, 545, p 149078.10.1016/j.apsusc.2021.149078 ↗
47. X. Chen, M. Yao, F. Kong, Y. Fu, J. Wu, and H. Zhang, In-situ Quality Monitoring of Laser Hot Wire Cladding Process Based on Multi-sensing Diagnosis and Machine Learning Model, J. Manuf. Process., 2023, 87, p 183-198.10.1016/j.jmapro.2023.01.031 ↗
48. C. Jiang, J. Zhang, Y. Chen, Z. Hou, Q. Zhao, Y. Li, L. Zhu, F. Zhang, and Y. Zhao, On Enhancing Wear Resistance of Titanium Alloys by Laser Cladded WC-Co Composite Coatings, Int. J. Refract. Metals Hard Mater., 2022, 107, p 105902.10.1016/j.ijrmhm.2022.105902 ↗
49. J. Zhang, J. Lei, Z. Gu, F. Tantai, H. Tian, J. Han, and Y. Fang, Effect of WC-12Co Content on Wear and Electrochemical Corrosion Properties of Ni-Cu/WC-12Co Composite Coatings Deposited by Laser Cladding, Surface Coat. Technol., 2020, 393, p 125807.10.1016/j.surfcoat.2020.125807 ↗
50. J. Zhang, G. Meng, L. Zhu, Z. Yang, P. Xue, and P. Xu, Formation Mechanism and Mechanical Properties of TiC Reinforced Inconel 718 Composite Coatings by Laser Cladding on H13 Steel, Int. J. Adv. Manuf. Technol., 2022, 121(5-6), p 3597-3611.10.1007/s00170-022-09545-x ↗
51. L. Chen, Y. Zhao, F. Meng, T. Yu, Z. Ma, S. Qu, and Z. Sun, Effect of TiC Content on the Microstructure and Wear Performance of In situ Synthesized Ni-Based Composite Coatings by Laser Direct Energy Deposition, Surface Coat. Technol., 2022, 444, p 128678.10.1016/j.surfcoat.2022.128678 ↗
52. T. Zhang, J. Zhou, J. Wang, X. Meng, P. Li, S. Huang, and H. Zhu, Effect of Hybrid Ultrasonic-Electromagnetic Field on Cracks and Microstructure of Inconel 718/60%WC Composites Coating Fabricated by Laser Cladding, Ceram. Int., 2022, 48(22), p 33901-33913.10.1016/j.ceramint.2022.07.339 ↗
53. S. Wang, J. Ning, L. Zhu, Z. Yang, W. Yan, Y. Dun, P. Xue, P. Xu, S. Bose, and A. Bandyopadhyay, Role of Porosity Defects in Metal 3D Printing: Formation Mechanisms, Impacts on Properties and Mitigation Strategies, Mater. Today, 2022, 59, p 133-160.10.1016/j.mattod.2022.08.014 ↗
54. F. Brückner, D. Lepski, and E. Beyer, Modeling the Influence of Process Parameters and Additional Heat Sources on Residual Stresses in Laser Cladding, J. Therm. Spray Technol., 2007, 16(3), p 355-373.10.1007/s11666-007-9026-7 ↗
55. P. Farahmand, S. Liu, Z. Zhang, and R. Kovacevic, Laser Cladding Assisted by Induction Heating of Ni-WC Composite Enhanced by Nano-WC and La2O3, Ceram. Int., 2014, 40(10), p 15421-15438.10.1016/j.ceramint.2014.06.097 ↗
56. C.P. Paul, H. Alemohammad, E. Toyserkani, A. Khajepour, and S. Corbin, Cladding of WC-12 Co on Low Carbon Steel Using a Pulsed Nd:YAG Laser, Mater. Sci. Eng. A, 2007, 464(1-2), p 170-176.10.1016/j.msea.2007.01.132 ↗
57. P. Xue, L. Zhu, P. Xu, Y. Ren, B. Xin, S. Wang, Z. Yang, J. Ning, G. Meng, and Z. Liu, CrCoNi Medium-Entropy Alloy Thin-Walled Parts Manufactured by Laser Metal Deposition: Microstructure Evolution and Mechanical Anisotropy, Mater. Sci. Eng. A, 2021, 817, p 141306.10.1016/j.msea.2021.141306 ↗
58. P. Xu, L. Zhu, P. Xue, Z. Yang, S. Wang, J. Ning, G. Meng, Q. Lan, and S. Qin, Microstructure and Properties of IN718/WC-12Co Composite Coating by Laser Cladding, Ceram. Int., 2022, 48(7), p 9218-9228.10.1016/j.ceramint.2021.12.108 ↗
59. T.E. Abioye, P.K. Farayibi, D.G. McCartney, and A.T. Clare, Effect of Carbide Dissolution on the Corrosion Performance of Tungsten Carbide Reinforced Inconel 625 Wire Laser Coating, J. Mater. Process. Technol., 2016, 231, p 89-99.10.1016/j.jmatprotec.2015.12.023 ↗
60. M. Fenech, M. Grech, and J.C. Betts, The In-flight Temperature Variation and Dissolution of WC Powder Particles Producing an Fe-Cr-W-C System by Direct Laser Deposition, Surface Coat. Technol., 2012, 207, p 211-217.10.1016/j.surfcoat.2012.06.063 ↗
61. X. Wang, S. Zhou, X. Dai, J. Lei, J. Guo, Z. Gu, and T. Wang, Evaluation and Mechanisms on Heat Damage of WC Particles in Ni60/WC Composite Coatings by Laser Induction Hybrid Cladding, Int. J. Refract. Met. Hard Mater., 2017, 64, p 234-241.10.1016/j.ijrmhm.2016.11.001 ↗
62. G. Muvvala, D. Patra Karmakar, and A.K. Nath, Online Assessment of TiC Decomposition in Laser Cladding of Metal Matrix Composite Coating, Mater. Des., 2017, 121, p 310-320.10.1016/j.matdes.2017.02.061 ↗
63. J. Kumar, M. Radhakrishnan, S. Palaniappan, K.V.M. Krishna, K. Biswas, S.G. Srinivasan, R. Banerjee, and N.B. Dahotre, Cr Content Dependent Lattice Distortion and Solid Solution Strengthening in Additively Manufactured CoFeNiCrx Complex Concentrated Alloys—A First Principles Approach, Mater. Today Commun., 2024, 40, p 109485.10.1016/j.mtcomm.2024.109485 ↗
64. P.A. Geslin, Modeling of Solid Solution Strengthening in FCC Alloys: Atomistic Simulations, Statistical Models and Elastic Continuous Approaches, Comput. Mater. Sci., 2024, 232, p 112624.10.1016/j.commatsci.2023.112624 ↗
65. Z. Wu, H. Bei, G.M. Pharr, and E.P. George, Temperature Dependence of the Mechanical Properties of Equiatomic Solid Solution Alloys with Face-Centered Cubic Crystal Structures, Acta Mater., 2014, 81, p 428-441.10.1016/j.actamat.2014.08.026 ↗
66. S. He, S. Park, D.S. Shim, C. Yao, M. Li, and S. Wang, Effect of Substrate Preheating on the Microstructure and Bending Behavior of WC-Inconel 718 Composite Coating Synthesized Via Laser Directed Energy Deposition, Int. J. Refract. Met. Hard Mater., 2023, 115, p 106299.10.1016/j.ijrmhm.2023.106299 ↗
67. L. Liu, G. Wang, J. Zhang, L. Wang, and Y. Rong, Synchronous Optimization of Surface Flatness and Interfacial Bonding Strength in Laser Cladding by Marangoni Flow, J. Manuf. Process., 2024, 125, p 25-37.10.1016/j.jmapro.2024.07.043 ↗
68. K.C. Mills, B.J. Keene, R.F. Brooks, and A. Shirali, Marangoni Effects in Welding, Philos. Trans. R. Soc. Lond. Ser. A Math. Phys. Eng. Sci., 1998, 356(1739), p 356.10.1098/rsta.1998.0196 ↗
69. M.H. Nie, S. Zhang, Z.Y. Wang, C.H. Zhang, H.T. Chen, and J. Chen, Effect of Laser Power on Microstructure and Interfacial Bonding Strength of Laser Cladding 17-4PH Stainless Steel Coatings, Mater. Chem. Phys., 2022, 275, p 125236.10.1016/j.matchemphys.2021.125236 ↗
70. P. Jin, Y. Liu, F. Li, and Q. Sun, Realization of Synergistic Enhancement for Fracture Strength and Ductility by Adding TiC Particles in Wire and Arc Additive Manufacturing 2219 Aluminium Alloy, Compos. Part B Eng., 2021, 219, p 108921.10.1016/j.compositesb.2021.108921 ↗
71. R. Fu, Y. Liang, Q. Han, Y. Guo, H. Lei, and C. Liu, Strengthening and Fracturing Mechanisms of Laser-Directed Energy Deposited Al-7075 Alloy, Mater. Sci. Eng. A, 2023, 881, p 145433.10.1016/j.msea.2023.145433 ↗
72. J.S. Keist and T.A. Palmer, Development of Strength-Hardness Relationships in Additively Manufactured Titanium Alloys, Mater. Sci. Eng. A, 2017, 693, p 214-224.10.1016/j.msea.2017.03.102 ↗
73. A. Rudnytskyj, M. Varga, S. Krenn, G. Vorlaufer, J. Leimhofer, M. Jech, and C. Gachot, Investigating the Relationship of Hardness and Flow Stress in Metal Forming, Int. J. Mech. Sci., 2022, 232, p 107571.10.1016/j.ijmecsci.2022.107571 ↗
74. X. Meng, Z. Sun, X. Chu, Y. Guo, H. Chang, and Y. Wang, Microstructural Evolution and Wear Properties of In-situ (TiB + TiC)-Reinforced Ti6Al4V Matrix Composite Coating by Laser Melting Deposition, Mater Charact, 2023, 205, p 113192.10.1016/j.matchar.2023.113192 ↗
75. L. Chen, Y. Chen, X. Chen, T. Yu, and Z. Wang, Microstructure and Properties of In situ TiC/Ni Functionally Gradient Coatings by Powder-Fed Laser Cladding, Ceram. Int., 2022, 48(24), p 36789-36801.10.1016/j.ceramint.2022.08.243 ↗
76. Y. Sun, L. Jin, Y. Gong, X. Wen, G. Yin, Q. Wen, and B. Tang, Experimental Evaluation of Surface Generation and Force Time-Varying Characteristics of Curvilinear Grooved Micro End Mills Fabricated by EDM, J. Manuf. Process., 2022, 73, p 799-814.10.1016/j.jmapro.2021.11.049 ↗
77. L. Chen, Y. Zhao, C. Guan, and T. Yu, Effects of CeO2 Addition on Microstructure and Properties of Ceramics Reinforced Fe-Based Coatings by Laser Cladding, Int. J. Adv. Manuf. Technol., 2021, 115(7-8), p 2581-2593.10.1007/s00170-021-07297-8 ↗
78. Y. Guo, C. Li, M. Zeng, J. Wang, P. Deng, and Y. Wang, In-situ TiC Reinforced CoCrCuFeNiSi0.2 High-Entropy Alloy Coatings Designed for Enhanced Wear Performance by Laser Cladding, Mater. Chem. Phys., 2020, 242, p 122522.10.1016/j.matchemphys.2019.122522 ↗
79. E. Binega, L. Yang, H. Sohn, and J.C.P. Cheng, Online Geometry Monitoring During Directed Energy Deposition Additive Manufacturing Using Laser Line Scanning, Precis. Eng., 2022, 73, p 104-114.10.1016/j.precisioneng.2021.09.005 ↗
80. G. Qiao, B. Zhang, Q. Bai, Y. Gao, W. Du, and Y. Zhang, Machinability of TiC-Reinforced Titanium Matrix Composites Fabricated by Additive Manufacturing, J. Manuf. Process., 2022, 76, p 412-418.10.1016/j.jmapro.2022.02.033 ↗
81. H. Wang, M. Wu, X. Miao, X. Jin, C. Cui, C. Ma, and Q. Wang, Effect of Nb on the Microstructure and Wear Resistance of In625/(Nbx+SiC0.5) Composite Coatings by Laser Cladding, Ceram. Int., 2023, 49(23), p 38420-38431.10.1016/j.ceramint.2023.09.247 ↗
82. M. Xie, C. Wu, S. Zhou, J. Jin, S. Zhao, and D. Chen, TiB2- and Fe2P with Nanotwins-Reinforced Cu-Based Immiscible Composites Fabricated by Selective Laser Melting: Formation Mechanism and Wear Behavior, J. Alloys Compd., 2021, 864, p 158716.10.1016/j.jallcom.2021.158716 ↗
83. K. Hua, H. Ding, L. Sun, Y. Cao, X. Li, H. Wu, and H. Wang, Enhancing High-Temperature Fretting Wear Resistance of TC21 Titanium Alloys by Laser Cladding Self-Lubricating Composite Coatings, J. Alloys Compd., 2024, 977, p 173360.10.1016/j.jallcom.2023.173360 ↗
84. S. Chandra, X. Tan, R.L. Narayan, C. Wang, S.B. Tor, and G. Seet, A Generalised Hot Cracking Criterion for Nickel-Based Superalloys Additively Manufactured by Electron Beam Melting, Addit. Manuf., 2021, 37, p 101633.
85. X.X. Wang, X.C. Ping, X. Zeng, R.J. Wang, Q. Zhao, S.J. Ying, and T. Hu, Fretting Fatigue Experiment and Simulation of WC-12Co Coating Taking into Account the Wear Effects, Surface Coat. Technol., 2022, 441, p 128555.10.1016/j.surfcoat.2022.128555 ↗