Study on the Effect of Laser Remelting Energy Density on the Microstructure and Wear Resistance of Fe-Based Alloy Coatings Fabricated by Laser Cladding
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Y. Li, S. Dong, S. Yan, X. Liu, P. He, and B. Xu, Microstructure evolution during laser cladding Fe-Cr alloy coatings on ductile cast iron, Opt. Laser Technol., 2018, 108, p 255-264. https://doi.org/10.1016/j.optlastec.2018.07.00410.1016/j.optlastec.2018.07.004 ↗
2. Z. Weng, A. Wang, Y. Wang, D. Xiong, and H. Tang, Diode laser cladding of Fe-based alloy on ductile cast iron and related interfacial behavior, Surf. Coat. Technol., 2016, 286, p 64-71. https://doi.org/10.1016/j.surfcoat.2015.12.03110.1016/j.surfcoat.2015.12.031 ↗
3. B. Podgornik, J. Vizintin, I. Thorbjornsson, B. Johannesson, J. Thorgrimsson, M. Celis, and N. Valle, Improvement of ductile iron wear resistance through local surface reinforcement, Wear, 2012, 274, p 267-273. https://doi.org/10.1016/j.wear.2011.09.00510.1016/j.wear.2011.09.005 ↗
4. F. Walsh, The continued development of multilayered and compositionally modulated electrodeposits, Trans. IMF, 2022, 100, p 233-244. https://doi.org/10.1080/00202967.2022.209407810.1080/00202967.2022.2094078 ↗
5. J. Shaw, H. Zhou, Y. Chen, N. Weiss, Y. Liu, Y. Huang, and X. Duan, Chemical vapor deposition growth of monolayer MoSe 2 nanosheets, Nano Res., 2014, 7, p 511-517. https://doi.org/10.1007/s12274-014-0417-z10.1007/s12274-014-0417-z ↗
6. J. Xia, X. Li, X. Huang, N. Mao, D. Zhu, L. Wang, H. Xu, and X. Meng, Physical vapor deposition synthesis of two-dimensional orthorhombic SnS flakes with strong angle/temperature-dependent Raman responses, Nanoscale, 2016, 8, p 2063-2070. https://doi.org/10.1039/C5NR07675G10.1039/C5NR07675G ↗
7. Q. Liu, T. Dong, B. Fu, G. Li, and L. Yang, Effect of laser remelting on microstructure and properties of AlCoCrFeNi high-entropy alloy coating, J. Mater. Eng. Perform., 2021, 30, p 5728-5735. https://doi.org/10.1007/s11665-021-05806-010.1007/s11665-021-05806-0 ↗
8. F. Arias-González, R. Del Val Comesaña, J. Penide, F. Lusquiños, F. Quintero, M. Boutinguiza, and J. Pou, Fiber laser cladding of nickel-based alloy on cast iron, Appl. Surf. Sci., 2016, 374, p 197-205. https://doi.org/10.1016/j.apsusc.2015.11.02310.1016/j.apsusc.2015.11.023 ↗
9. J. Liu, H. Yu, C. Chen, F. Weng, and J. Dai, Research and development status of laser cladding on magnesium alloys: a review, Opt. Lasers Eng., 2017, 93, p 195-210. https://doi.org/10.1016/j.optlaseng.2017.02.00710.1016/j.optlaseng.2017.02.007 ↗
10. Y. Liu, Y. Ding, L. Yang, R. Sun, T. Zhang, and X. Yang, Research and progress of laser cladding on engineering alloys: a review, J. Manuf. Process., 2021, 66, p 341-363. https://doi.org/10.1016/j.jmapro.2021.03.06110.1016/j.jmapro.2021.03.061 ↗
11. C. Ouyang, R. Wang, C. Zhao, R. Wei, H. Li, R. Deng, Q. Bai, and Y. Liu, Multi-layer laser cladding analysis and high-temperature oxidative wear behavior of cast iron with a low expansion coefficient, Surf. Coat. Technol., 2023, 474, 130079. https://doi.org/10.1016/j.surfcoat.2023.13007910.1016/j.surfcoat.2023.130079 ↗
12. G. Zhang, T. Liu, Q. Yin, W. Wang, X. Song, W. Huang, and H. Zhang, Effect of B-Si ratio and laser remelting on the microstructure and properties of Fe10Co10Ni10Cr4Mo6BxSi10-x coating by laser cladding, Surf. Coat. Technol., 2022, 450, 128989. https://doi.org/10.1016/j.surfcoat.2022.12898910.1016/j.surfcoat.2022.128989 ↗
13. W. Cheng, X. Pang, Q. Gong, Z. Wang, and P. Nie, Effect of laser remelting on the microstructure and mechanical properties of AerMet100 steel fabricated by laser cladding, Mater. Sci. Eng. A, 2022, 840, 142951. https://doi.org/10.1016/j.msea.2022.14295110.1016/j.msea.2022.142951 ↗
14. S. ManJunatha, M. Manjajah, and S. Basavarajappa, Characterization of laser remelted plasma-sprayed Mo coating on AISI 1020 steel, SILICON, 2017, 9, p 741-751. https://doi.org/10.1007/s12633-016-9523-810.1007/s12633-016-9523-8 ↗
15. M. Buchtik, M. Hasonova, M. Brezina, L. Doskocil, J. Masilko, L. Mrna, J. Filipensky, I. Kubena, S. Fintova, J. Wasserbauer, and P. Dolezal, Influence of laser remelting on the microstructure and corrosion behavior of HVOF-sprayed Fe-based coatings on magnesium alloy, Mater CharactCharact, 2022, 194, 112343. https://doi.org/10.1016/j.matchar.2022.11234310.1016/j.matchar.2022.112343 ↗
16. X. Xu, J. Du, K. Luo, M. Peng, F. Xing, L. Wu, and J. Lu, Microstructural features and corrosion behavior of Fe-based coatings prepared by an integrated process of extreme high-speed laser additive manufacturing, Surf. Coat. Technol., 2021, 422, 127500. https://doi.org/10.1016/j.surfcoat.2021.12750010.1016/j.surfcoat.2021.127500 ↗
17. J. Yu, W. Sun, G. Zhang, Q. Cui, and H. Jiao, Effect of variable specific energy laser remelting on the morphology, microstructure, and mechanical properties of Ta/Ni-based composite coatings, JOM, 2023 https://doi.org/10.1007/s11837-023-05799-210.1007/s11837-023-05799-2 ↗
18. M. Liu, H. Jiang, G. Chang, Y. Xu, F. Ma, and K. Xu, Effect of laser remelting on corrosion and wear resistance of Fe82Cr16SiB alloy coatings fabricated by extreme high-speed laser cladding, Mater. Lett., 2022, 325, 132823. https://doi.org/10.1016/j.matlet.2022.13282310.1016/j.matlet.2022.132823 ↗
19. B. Sun, Q. Wang, Y. Chen, J. Cheng, H. Zhao, S. Zhu, B. Zhang, X. Liang, and B. Shen, Dendrite refinement and wear performance enhancement in laser-cladded Fe-based coatings after multi-step laser remelting, Surf. Coat. Technol., 2022, 447, 128794. https://doi.org/10.1016/j.surfcoat.2022.12879410.1016/j.surfcoat.2022.128794 ↗
20. Q. Ma, Y. Li, J. Wang, and K. Liu, Homogenization of carbides in Ni60/WC composite coatings made by fiber laser remelting, Mater. Manuf. Processes, 2015, 30, p 1417-1424. https://doi.org/10.1080/10426914.2015.102635310.1080/10426914.2015.1026353 ↗
21. Y. Ding, W. Gui, B. Nie, W. Bi, C. Zhong, Y. Xue, and B. Luan, Elimination of elemental segregation by high-speed laser remelting for ultra-high-speed laser cladding Inconel 625 coatings, J. Market. Res., 2023, 24, p 4118-4129. https://doi.org/10.1016/j.jmrt.2023.04.02810.1016/j.jmrt.2023.04.028 ↗
22. W. Xi, B. Song, Z. Wang, T. Yu, J. Wang, and Y. Dai, Effect of laser re-melting on geometry and mechanical properties of YCF102 cladding layer, Surf. Coat. Technol., 2021, 408, 126789. https://doi.org/10.1016/j.surfcoat.2020.12678910.1016/j.surfcoat.2020.126789 ↗
23. Y. Chen, X. Li, J. Liu, Y. Zhang, and X. Chen, Effect of scanning speed on properties of laser surface remelted 304 stainless steel, Micromachines, 2022, 13, p 1426. https://doi.org/10.3390/mi1309142610.3390/mi13091426 ↗
24. C. Zhang, L. Chai, Q. Li, Y. Ma, H. Wang, and X. An, Effect of scanning speed on microstructure and texture of laser surface remelted 1050 Al alloy, Trans. Nonferrous Metals Soc. China, 2023, 33, p 1677-1686. https://doi.org/10.1016/S1003-6326(23)66213-210.1016/S1003-6326(23)66213-2 ↗
25. W. Xi, B. Song, Z. Sun, Z. Ma, T. Yu, and J. Wang, Effect of remelting power and remelting time on the morphological characteristics and mechanical properties of Fe-based clad layer, Opt. Lasers Eng., 2023, 161, 107330. https://doi.org/10.1016/j.optlaseng.2022.10733010.1016/j.optlaseng.2022.107330 ↗
26. Z. Chong, Y. Sun, W. Cheng, L. Huang, C. Han, X. Ma, and A. Meng, Laser remelting induces grain refinement and properties enhancement in high-speed laser cladding AlCoCrFeNi high-entropy alloy coatings, Intermetallics, 2022, 150, 107686. https://doi.org/10.1016/j.intermet.2022.10768610.1016/j.intermet.2022.107686 ↗
27. R. Wei, M. Mao, J. Liang, C. Zhao, C. Ouyang, and Q. Bai, Repair feasibility and performance enhancement analysis of Fe-based alloy coating on ductile iron surface by high-speed laser cladding, Mater. Today Commun., 2024, 39, 108638. https://doi.org/10.1016/j.mtcomm.2024.10863810.1016/j.mtcomm.2024.108638 ↗
28. L. Cao, S. Chen, M. Wei, Q. Guo, J. Liang, C. Liu, and M. Wang, Effect of laser energy density on defects behavior of direct laser depositing 24CrNiMo alloy steel, Opt. Laser Technol., 2019, 111, p 541-553. https://doi.org/10.1016/j.optlastec.2018.10.02510.1016/j.optlastec.2018.10.025 ↗
29. L. Zhu, P. Xue, Q. Lan, G. Meng, Y. Ren, Z. Yang, P. Xu, and Z. Liu, Recent research and development status of laser cladding: a review, Opt. Laser Technol., 2021, 138, 106915. https://doi.org/10.1016/j.optlastec.2021.10691510.1016/j.optlastec.2021.106915 ↗
30. R.A. Savrai, N. Soboleva, I. Malygina, and A. Osintseva, The structural characteristics and contact loading behavior of gas powder laser clad CoNiCrW coating, Opt. Laser Technol., 2020, 126, 106079. https://doi.org/10.1016/j.optlastec.2020.10607910.1016/j.optlastec.2020.106079 ↗
31. J. Li, Z. Zhu, Y. Peng, and G. Shen, In situ synthesized (Cr, Fe) 7 C 3-reinforced composite coatings via laser cladding deposition of Fe-based alloys and carbon fibers, J. Mater. Eng. Perform., 2020, 29, p 391-398. https://doi.org/10.1007/s11665-019-04528-810.1007/s11665-019-04528-8 ↗
32. P. Xu, L. Zhu, P. Xue, Z. Yang, S. Wang, J. Ning, G. Meng, Q. Lan, and S. Qin, Microstructure and properties of IN718/WC-12Co composite coating by laser cladding, Ceram. Int., 2022, 48, p 9218-9228. https://doi.org/10.1016/j.ceramint.2021.12.10810.1016/j.ceramint.2021.12.108 ↗
33. J. O’Connell, M. Lee, M. Yagoub, H. Swart, and E. Coetsee, Characterization of crystallite morphology for doped strontium fluoride nanophosphors by TEM and XRD, Physica B B, 2016, 480, p 169-173. https://doi.org/10.1016/j.physb.2015.09.02110.1016/j.physb.2015.09.021 ↗
34. H. Ye, X. Sun, Y. Liu, X. Rao, and Q. Gu, Effect of ultrasonic surface rolling process on mechanical properties and corrosion resistance of AZ31B Mg alloy, Surf. Coat. Technol., 2019, 372, p 288-298. https://doi.org/10.1016/j.surfcoat.2019.05.03510.1016/j.surfcoat.2019.05.035 ↗
35. Y. An, S. Zheng, X. Pang, and J. Pu, Effect of laser remelting on copper-nickel alloy coating prepared by extreme high-speed laser cladding, J. Manuf. Process., 2023, 95, p 497-507. https://doi.org/10.1016/j.jmapro.2023.04.02210.1016/j.jmapro.2023.04.022 ↗
36. C. Cui, M. Wu, R. He, Y. Gong, and X. Miao, Understanding Stellite-6 coating prepared by laser cladding: convection and columnar-to-equiaxed transition, Opt. Laser Technol., 2022, 149, 107885. https://doi.org/10.1016/j.optlastec.2022.10788510.1016/j.optlastec.2022.107885 ↗
37. I. Hemmati, V. Ocelík, and J. De, Microstructural characterization of AISI 431 martensitic stainless steel laser-deposited coatings, J. Mater. Sci., 2011, 46, p 3405-3414. https://doi.org/10.1007/s10853-010-5229-210.1007/s10853-010-5229-2 ↗
38. R. Wang, C. Ouyang, C. Zhao, R. Wei, R. Deng, and L. Jiang, Effect of high-temperature heat treatment on electrochemical corrosion behavior of laser cladding Fe-based alloy coating in H2SO4 solution, Mater. Lett., 2023, 346, 134560. https://doi.org/10.1016/j.matlet.2023.13456010.1016/j.matlet.2023.134560 ↗
39. H. Zhu, M. Ouyang, J. Hu, J. Zhang, and C. Qiu, Design and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser cladding, Ceram. Int., 2021, 47, p 12505-12513. https://doi.org/10.1016/j.ceramint.2021.01.10810.1016/j.ceramint.2021.01.108 ↗
40. D. Adebiyi, A. Popoola, and S. Pityana, Microstructural evolution at the overlap zones of 12Cr martensitic stainless steel laser alloyed with TiC, Opt. Laser Technol., 2014, 61, p 15-23. https://doi.org/10.1016/j.optlastec.2014.01.01410.1016/j.optlastec.2014.01.014 ↗
41. C. Li, Y. Wang, Z. Zhang, B. Han, and T. Han, Influence of overlapping ratio on hardness and residual stress distributions in multi-track laser surface melting roller steel, Opt. Lasers Eng., 2010, 48, p 1224-1230. https://doi.org/10.1016/j.optlaseng.2010.06.01010.1016/j.optlaseng.2010.06.010 ↗
42. Y. Li, Y. Hu, D. Zhang, and W. Cong, Laser remelting of CoCrFeNiTi high entropy alloy coatings fabricated by directed energy deposition: effects of remelting laser power, Opt. Laser Technol., 2023, 158, 108871. https://doi.org/10.1016/j.optlastec.2022.10887110.1016/j.optlastec.2022.108871 ↗
43. Y. Guo, C. Li, M. Zeng, J. Wang, P. Deng, and Y. Wang, In-situ TiC reinforced CoCrCuFeNiSi0.2 high-entropy alloy coatings designed for enhanced wear performance by laser cladding, Mater. Chem. Phys., 2020, 242, p 122522. https://doi.org/10.1016/j.matchemphys.2019.12252210.1016/j.matchemphys.2019.122522 ↗
44. X. Qi, Y. Li, F. Li, J. Du, C. Li, K. Wang, H. Lu, and B. Yang, Improving the properties of remanufactured wear parts of shield tunneling machines by novel Fe-based composite coatings, Ceram. Int., 2022, 48, p 6722-6733. https://doi.org/10.1016/j.ceramint.2021.11.22310.1016/j.ceramint.2021.11.223 ↗
45. B. Han, Y. Chen, C. Tan, M. Jiang, J. Bi, J. Feng, X. Chen, L. Chen, L. Zhang, X. Liu, L. Cao, and G. Bi, Microstructure and wear behavior of laser clad interstitial CoCrFeNi high entropy alloy coating reinforced by carbon nanotubes, Surf. Coat. Technol., 2022, 434, 128241. https://doi.org/10.1016/j.surfcoat.2022.12824110.1016/j.surfcoat.2022.128241 ↗