journal article·2025-02

Advancements in Deposition of High Entropy Alloys Using Cold Spray Technology

Magesh Kumaravel, Sara Bagherifard, Mario Guagliano

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. D.B. Miracle and O.N. Senkov, A Critical Review of High Entropy Alloys and Related Concepts, Acta Mater., 2017, 122, p 448-511.10.1016/j.actamat.2016.08.081 ↗
2. Y.F. Ye, Q. Wang, J. Lu, C.T. Liu and Y. Yang, High-Entropy Alloy: Challenges and Prospects, Mater. Today, 2016, 19, p 349-362.10.1016/j.mattod.2015.11.026 ↗
3. Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw and Z.P. Lu, Microstructures and Properties of High-Entropy Alloys, Prog. Mater. Sci., 2014, 61, p 1-93.10.1016/j.pmatsci.2013.10.001 ↗
4. M. Vaidya, K. Guruvidyathri and B.S. Murty, Phase Formation and Thermal Stability of CoCrFeNi and CoCrFeMnNi Equiatomic High Entropy Alloys, J. Alloys Compd., 2019, 774, p 856-864.10.1016/j.jallcom.2018.09.342 ↗
5. J. Lehtonen, Y. Ge, N. Ciftci, O. Heczko, V. Uhlenwinkel and S.P. Hannula, Phase Structures of Gas Atomized Equiatomic CrFeNiMn High Entropy Alloy Powder, J. Alloys Compd., 2020, 827, p 154142.10.1016/j.jallcom.2020.154142 ↗
6. D.F. Rojas, H. Li, O.K. Orhan, C. Shao, J.D. Hogan and M. Ponga, Mechanical and Microstructural Properties of a CoCrFe0.75NiMo0.3Nb0.125 High-Entropy Alloy Additively Manufactured Via Cold-Spray, J. Alloys Compd., 2022, 893, p 162309.10.1016/j.jallcom.2021.162309 ↗
7. E.P. George, W.A. Curtin and C.C. Tasan, High Entropy Alloys: A Focused Review of Mechanical Properties and Deformation Mechanisms, Acta Mater., 2020, 188, p 435-474.10.1016/j.actamat.2019.12.015 ↗
8. B. Cantor, Multicomponent High-Entropy Cantor Alloys, Prog. Mater. Sci., 2021, 120, p 100754.10.1016/j.pmatsci.2020.100754 ↗
9. C.-J. Tong, Y.-L. Chen, S.-K. Chen, J.-W. Yeh, T.-T. Shun, C.-H. Tsau, S.-J. Lin, and S.-Y. Chang, “Microstructure Characterization of Al x CoCrCuFeNi High-Entropy Alloy System with Multiprincipal Elements,” n.d.
10. Z. Zeng, M. Xiang, D. Zhang, J. Shi, W. Wang, X. Tang, W. Tang, Y. Wang, X. Ma, Z. Chen, W. Ma and K. Morita, Mechanical Properties of Cantor Alloys Driven by Additional Elements: A Review, J. Mater. Res. Technol., 2021, 15, p 1920-1934.10.1016/j.jmrt.2021.09.019 ↗
11. X. Wang, W. Guo and Y. Fu, High-Entropy Alloys: Emerging Materials for Advanced Functional Applications, J. Mater. Chem. A Roy. Soc. Chem., 2021, 2021, p 663-701.10.1039/D0TA09601F ↗
12. S.G. Ma, J.W. Qiao, Z.H. Wang, H.J. Yang and Y. Zhang, Microstructural Features and Tensile Behaviors of the Al0.5CrCuFeNi2 High-Entropy Alloys by Cold Rolling and Subsequent Annealing, Mater. Des., 2015, 88, p 1057-1062.10.1016/j.matdes.2015.09.092 ↗
13. S. Xia, M.C. Gao, T. Yang, P.K. Liaw and Y. Zhang, Phase Stability and Microstructures of High Entropy Alloys Ion Irradiated to High Doses, J. Nucl. Mater., 2016, 480, p 100-108.10.1016/j.jnucmat.2016.08.017 ↗
14. D. Li and Y. Zhang, The Ultrahigh Charpy Impact Toughness of Forged Alxcocrfeni High Entropy Alloys at Room and Cryogenic Temperatures, Intermetallics (Barking), 2016, 70, p 24-28.10.1016/j.intermet.2015.11.002 ↗
15. T. Zuo, X. Yang, P.K. Liaw and Y. Zhang, Influence of Bridgman Solidification on Microstructures and Magnetic Behaviors of a Non-Equiatomic FeCoNiAlSi High-Entropy Alloy, Intermetallics (Barking), 2015, 67, p 171-176.10.1016/j.intermet.2015.08.014 ↗
16. S.G. Ma, S.F. Zhang, M.C. Gao, P.K. Liaw and Y. Zhang, A Successful Synthesis of the CoCrFeNiAl0.3 Single-Crystal, High-Entropy Alloy by Bridgman Solidification, JOM, 2013, 65(12), p 1751-1758.10.1007/s11837-013-0733-x ↗
17. Y. Zhang, X.H. Yan, W.B. Liao and K. Zhao, Effects of Nitrogen Content on the Structure and Mechanical Properties of (Al0.5CrFeNiTi0.25)Nx High-Entropy Films by Reactive Sputtering, Entropy MDPI AG, 2018, 20(9), p 624.10.3390/e20090624 ↗
18. Y. Zhang, Q. Xing, High Entropy Alloys: Manufacturing Routes, in Encyclopedia of Materials: Metals and Alloys (2021), pp. 327-33810.1016/B978-0-12-803581-8.12123-X ↗
19. A. Meghwal, A. Anupam, B.S. Murty, C.C. Berndt, R.S. Kottada and A.S.M. Ang, Thermal Spray High-Entropy Alloy Coatings: A Review, Journal of Therm. Spray Technol., 2020, 2020(29), p 857-893.10.1007/s11666-020-01047-0 ↗
20. R. Nikbakht, M. Saadati, T.S. Kim, M. Jahazi, H.S. Kim and B. Jodoin, Cold Spray Deposition Characteristic and Bonding of CrMnCoFeNi High Entropy Alloy, Surf. Coat. Technol., 2021, 425, p 127748.10.1016/j.surfcoat.2021.127748 ↗
21. J. Zhu, X. Cheng, L. Zhang, X. Hui, Y. Wu, H. Zheng, Z. Ren, Y. Zhao, W. Wang, S. Zhu and X. Wang, Microstructures, Wear Resistance and Corrosion Resistance of CoCrFeNi High Entropy Alloys Coating on AZ91 Mg Alloy Prepared by Cold Spray, J. Alloys Compd., 2022, 925, p 166698.10.1016/j.jallcom.2022.166698 ↗
22. J. Lehtonen, H. Koivuluoto, Y. Ge, A. Juselius and S.P. Hannula, Cold Gas Spraying of a High-Entropy CrFeNiMn Equiatomic Alloy, Coat. MDPI AG, 2020, 10(1), p 53.
23. A. Anupam, S. Kumar, N.M. Chavan, B.S. Murty and R.S. Kottada, First Report on Cold-Sprayed AlCoCrFeNi High-Entropy Alloy and Its Isothermal Oxidation, J. Mater. Res., 2019, 34(5), p 796-806.10.1557/jmr.2019.38 ↗
24. D.V. Hushchyk, A.I. Yurkova, V.V. Cherniavsky, I.I. Bilyk and S.O. Nakonechnyy, Nanostructured AlNiCoFeCrTi High-Entropy Coating Performed by Cold Spray, Appl. Nanosci. (Switzerland), 2020, 10(12), p 4879-4890.10.1007/s13204-020-01364-4 ↗
25. R. Supekar, R.B. Nair, A. McDonald and P. Stoyanov, Sliding Wear Behavior of High Entropy Alloy Coatings Deposited through Cold Spraying and Flame Spraying: A Comparative Assessment, Wear, 2023, 2023, p 516-517.
26. R.B. Nair, S. Ngan and A. McDonald, Dry Abrasive Wear and Solid Particle Erosion Assessments of High Entropy Alloy Coatings Fabricated by Cold Spraying, Mater. Today Commun., 2023, 2023(34), p 105527.10.1016/j.mtcomm.2023.105527 ↗
27. A.I. Yurkova, D.V. Hushchyk and A.V. Minitsky, Synthesis of High-Entropy AlNiCoFeCrTi Coating by Cold Spraying, Powder Metall. Metal Ceram., 2021, 59(11-12), p 681-694.10.1007/s11106-021-00203-7 ↗
28. W.E. King, A.T. Anderson, R.M. Ferencz, N.E. Hodge, C. Kamath, S.A. Khairallah and A.M. Rubenchik, Laser Powder Bed Fusion Additive Manufacturing of Metals Physics, Computational, and Materials Challenges, Appl. Phys. Rev., 2015, 2(4), p 041304.10.1063/1.4937809 ↗
29. Z. Fu and C. Körner, Actual State-of-the-Art of Electron Beam Powder Bed Fusion, Eur. J. Mater., 2022, 2(1), p 54-116.10.1080/26889277.2022.2040342 ↗
30. S. Chen, Y. Tong, and P.K. Liaw, Additive Manufacturing of High-Entropy Alloys: A Review. Entropy, MDPI AG (2018)10.3390/e20120937 ↗
31. D. Karlsson, G. Lindwall, A. Lundbäck, M. Amnebrink, M. Boström, L. Riekehr, M. Schuisky, M. Sahlberg and U. Jansson, Binder Jetting of the AlCoCrFeNi Alloy, Addit. Manuf., 2019, 27, p 72-79.
32. Z. Xu, Z. Zhu, P. Wang, G.K. Meenashisundaram, S.M.L. Nai and J. Wei, Fabrication of Porous CoCrFeMnNi High Entropy Alloy Using Binder Jetting Additive Manufacturing, Addit. Manuf., 2020, 35, p 101441.
33. S. Peng, S. Mooraj, R. Feng, L. Liu, J. Ren, Y. Liu, F. Kong, Z. Xiao, C. Zhu, P.K. Liaw and W. Chen, Additive Manufacturing of Three-Dimensional (3D)-Architected CoCrFeNiMn High-Entropy Alloy with Great Energy Absorption, Scr. Mater., 2021, 190, p 46-51.10.1016/j.scriptamat.2020.08.028 ↗
34. C. Kenel, N.P.M. Casati and D.C. Dunand, 3D Ink-Extrusion Additive Manufacturing of CoCrFeNi High-Entropy Alloy Micro-Lattices, Nat. Commun., 2019, 10, p 1.10.1038/s41467-019-08763-4 ↗
35. P. Agrawal, R.S. Haridas, P. Agrawal and R.S. Mishra, Deformation Based Additive Manufacturing of a Metastable High Entropy Alloy via Additive Friction Stir Deposition, Addit. Manuf., 2022, 60, p 103282.
36. Z. McClelland, K. Dunsford, B. Williams, H. Petersen, K. Devami, M. Weaver, J.B. Jordan and P.G. Allison, Microstructure and Mechanical Behavior Comparison between Cast and Additive Friction Stir-Deposited High-Entropy Alloy Al0.35CoCrFeNi, Materials, 2024, 17(4), p 910.10.3390/ma17040910 ↗
37. T. Stoltenhoff, H. Kreye, and H.J. Richter, An Analysis of the Cold Spray Process and Its Coatings. n.d.
38. H. Assadi, F. Gärtner, T. Stoltenhoff and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51(15), p 4379-4394.10.1016/S1359-6454(03)00274-X ↗
39. G. Bae, Y. Xiong, S. Kumar, K. Kang and C. Lee, General Aspects of Interface Bonding in Kinetic Sprayed Coatings, Acta Mater., 2008, 56(17), p 4858-4868.10.1016/j.actamat.2008.06.003 ↗
40. G. Vinay, S. Kumar, and N.M. Chavan, Generalised Bonding Criteria in Cold Spraying: Revisiting the Influence of in-Flight Powder Temperature. Mater. Sci. Eng. A 823 (2021)10.1016/j.msea.2021.141719 ↗
41. S. Feng, S. Guan, W.A. Story, J. Ren, S. Zhang, A. Te, M.A. Gleason, J. Heelan, C. Walde, A. Birt, K.L. Tsaknopoulos, D.L. Cote, W. Kapalczynski, A.T. Naardi, V.K. Champagne, M.J. Siopis and W. Chen, Cold Spray Additive Manufacturing of CoCrFeNiMn High-Entropy Alloy: Process Development, Microstructure, and Mechanical Properties, J. Therm. Spray Technol., 2022, 31, p 1222-1231.10.1007/s11666-022-01374-4 ↗
42. G. Prashar and H. Vasudev, A Comprehensive Review on Sustainable Cold Spray Additive Manufacturing: State of the Art, Challenges and Future Challenges, J. Clean. Prod., 2021, 310, p 127606.10.1016/j.jclepro.2021.127606 ↗
43. S. Yin, P. Cavaliere, B. Aldwell, R. Jenkins, H. Liao, W. Li and R. Lupoi, Cold Spray Additive Manufacturing and Repair: Fundamentals and Applications, Addit. Manuf., 2018, 21, p 628-650.
44. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano and M. Dao, Surface Engineering Cold Spray Coating: Review of Material Systems and Future Perspectives Cold Spray Coating: Review of Material Systems and Future, Perspectives, 2014 https://doi.org/10.1179/1743294414Y.000000027010.1179/1743294414Y.0000000270 ↗
45. T.B. Mangalarapu, S. Kumar, P. Gandham and S. Koppoju, Cold Spraying of Al-Aerospace Alloys: Ease of Coating Deposition at High Stagnation Temperatures, Surf. Coat. Technol., 2023, 467, p 129703.10.1016/j.surfcoat.2023.129703 ↗
46. R.P.S. Chakradhar, G. Chandra Mouli, H. Barshilia and M. Srivastava, Improved Corrosion Protection of Magnesium Alloys AZ31B and AZ91 by Cold-Sprayed Aluminum Coatings, J. Therm. Spray Technol., 2021, 30(12), p 371-384.10.1007/s11666-020-01128-0 ↗
47. B. Jodoin, L. Ajdelsztajn, E. Sansoucy, A. Zúñiga, P. Richer and E.J. Lavernia, Effect of Particle Size, Morphology, and Hardness on Cold Gas Dynamic Sprayed Aluminum Alloy Coatings, Surf. Coat. Technol., 2006, 201(6), p 3422-3429.10.1016/j.surfcoat.2006.07.232 ↗
48. F.J. Wei, B.Y. Chou, K.Z. Fung and S.Y. Tsai, Thermomechanical Properties of Cold-Sprayed Copper Coatings from Differently Fabricated Powders, Surf. Coat. Technol., 2022, 434, p 128128.10.1016/j.surfcoat.2022.128128 ↗
49. E. Calla, D.G. McCartney and P.H. Shipway, Effect of Deposition Conditions on the Properties and Annealing Behavior of Cold-Sprayed Copper, J. Therm. Spray Technol., 2006, 15, p 255-262.10.1361/105996306X108192 ↗
50. R. Singh, J. Kondás, C. Bauer, J. Cizek, J. Medricky, S. Csaki, J. Čupera, R. Procházka, D. Melzer and P. Konopík, Bulk-like Ductility of Cold Spray Additively Manufactured Copper in the as-Sprayed State, Addit. Manuf. Lett., 2022, 3, p 100052.10.1016/j.addlet.2022.100052 ↗
51. T. Stoltenhoff, C. Borchers, F. Gärtner and H. Kreye, Microstructures and Key Properties of cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200(16-17), p 4947-4960.10.1016/j.surfcoat.2005.05.011 ↗
52. W. Li, C. Cao and S. Yin, Solid-State Cold Spraying of Ti and Its Alloys: A Literature Review, Prog. Mater. Sci., 2020, 110, p 100633.10.1016/j.pmatsci.2019.100633 ↗
53. D.K. Christoulis, S. Guetta, V. Guipont and M. Jeandin, The Influence of the Substrate on the Deposition of Cold-Sprayed Titanium: An Experimental and Numerical Study, J. of Therm. Spray Technol., 2011, 20, p 523-533.10.1007/s11666-010-9608-7 ↗
54. W. Wong, E. Irissou, A.N. Ryabinin, J.G. Legoux and S. Yue, Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings, J. Therm. Spray Technol., 2011, 20, p 213-226.10.1007/s11666-010-9568-y ↗
55. J.R. Tang, Z.P. Zhao, X.Y. Cui, J.Q. Wang and T.Y. Xiong, Microstructure and Bioactivity of a Cold Sprayed Rough/Porous Ta Coating on Ti6Al4V Substrate, Sci. China Technol. Sci., 2020, 63(5), p 731-739.10.1007/s11431-019-1446-0 ↗
56. D.M. Jafarlou, B.C. Sousa, M.A. Gleason, G. Ferguson, A.T. Nardi, D.L. Cote and I.R. Grosse, Solid-State Additive Manufacturing of Tantalum Using High-Pressure Cold Gas-Dynamic Spray, Addit. Manuf., 2021, 47, p 102243.
57. W. Sun, A.W.Y. Tan, D.J.Y. King, N.W. Khun, A. Bhowmik, I. Marinescu and E. Liu, Tribological Behavior of Cold Sprayed Inconel 718 Coatings at Room and Elevated Temperatures, Surf. Coat. Technol., 2020, 385, p 125386.10.1016/j.surfcoat.2020.125386 ↗
58. G.N. Devi, S. Kumar, T.S. Balaji, T.B. Mangalarapu, S.B. Chandrasekhar, A.V. Gopal and A. Jyothirmayi, Influence of Inter-Splat Bonding State of Cold Sprayed IN625 and IN718 Coatings on Mechanical and Corrosion Performance, Surf. Coat. Technol., 2022, 445, p 128731.10.1016/j.surfcoat.2022.128731 ↗
59. N. Brizuela-Colmenares, L.I. Pérez-Andrade, S. Perez, L.N. Brewer and J. Muñoz-Saldaña, Mechanical and Microstructural Behavior of Inconel 625 Deposits by High-Pressure Cold Spray and Laser Assisted Cold Spray, Surf. Coat. Technol., 2024, 485, p 130917.10.1016/j.surfcoat.2024.130917 ↗
60. R. Nikbakht, H. Assadi and B. Jodoin, Intermetallic Phase Evolution of Cold-Sprayed Ni-Ti Composite Coatings: Influence of As-Sprayed Chemical Composition, J. Therm. Spray Technol., 2021, 30(1-2), p 119-130.10.1007/s11666-020-01112-8 ↗
61. D. Wu, W. Li, K. Liu, Y. Yang and S. Hao, Optimization of Cold Spray Additive Manufactured AA2024/Al2O3 Metal Matrix Composite with Heat Treatment, J. Mater. Sci. Technol., 2022, 106, p 211-224.10.1016/j.jmst.2021.07.036 ↗
62. C. Huang, A. List, L. Wiehler, M. Schulze, F. Gärtner and T. Klassen, Cold Spray Deposition of Graded Al-SiC Composites, Addit. Manuf., 2022, 59, p 103116.
63. L. He and M. Hassani, A Review of the Mechanical and Tribological Behavior of Cold Spray Metal Matrix Composites, J. Therm. Spray Technol., 2020, 29, p 1565-1608.10.1007/s11666-020-01091-w ↗
64. X. Xie, S. Yin, R. Nirinaraoelison, C. Chen, C. Verdy, W. Li, G. Ji, Z. Ren and H. Liao, Al Matrix Composites Fabricated by Solid-State Cold Spray Deposition: A Critical Review, J. Mater. Sci. Technol., 2021, 86, p 20-55.10.1016/j.jmst.2021.01.026 ↗
65. S.A. Jose, A.K. Kasar and P.L. Menezes, Cold Spray Deposition of Cermets: Insights into Bonding Mechanism and Critical Parameters, Int. J. Adv. Manuf. Technol., 2024, 133(1-2), p 1-23.10.1007/s00170-024-13637-1 ↗
66. A. Trelka, A. Góral, W. Żórawski, T. Gancarz and P. Petrzak, The Mechanical and Tribological Properties of Cold-Sprayed Cermet Coatings—Al Alloy Substrate Systems, J. Therm. Spray Technol., 2023, 32, p 1714-1727.10.1007/s11666-023-01590-6 ↗
67. A.S. Jagadeeswar, S. Kumar, B. Venkataraman, P.S. Babu and A. Jyothirmayi, Effect of Thermal Energy on the Deposition Behaviour Wear and Corrosion Resistance of Cold Sprayed Ni-WC Cermet Coatings, Surf. Coat. Technol., 2020, 399, p 126138.10.1016/j.surfcoat.2020.126138 ↗
68. H. Singh, M. Kumar, and R. Singh, Development of High Pressure Cold Spray Coatings of Tungsten Carbide Composites, Mater. Today Proc. (2022).10.1016/j.matpr.2022.12.210 ↗
69. K. Kim, S. Kuroda, M. Watanabe, R. Huang, H. Fukanuma and H. Katanoda, Comparison of Oxidation and Microstructure of Warm-Sprayed and Cold-Sprayed Titanium Coatings, J. Therm. Spray Technol., 2012, 21, p 550-560.10.1007/s11666-011-9703-4 ↗
70. Z. Zhang, D.H.L. Seng, M. Lin, S.L. Teo, T.L. Meng, C.J.J. Lee, Z.Q. Zhang, T. Ba, J. Guo, K. Sundaravadivelu, P.K. Aw and J. Pan, Cold Spray Deposition of Inconel 718 in Comparison with Atmospheric Plasma Spray Deposition, Appl. Surf. Sci., 2021, 535, p 147704.10.1016/j.apsusc.2020.147704 ↗
71. M. Couto, S. Dosta, J. Fernández and J.M. Guilemany, Comparison of the Mechanical and Electrochemical Properties of WC-25Co Coatings Obtained by High Velocity Oxy-Fuel and Cold Gas Spraying, J. Therm. Spray Technol., 2014, 23(8), p 1251-1258.10.1007/s11666-014-0123-0 ↗
72. B. Maier, H. Yeom, G. Johnson, T. Dabney, J. Walters, P. Xu, J. Romero, H. Shah and K. Sridharan, Development of Cold Spray Chromium Coatings for Improved Accident Tolerant Zirconium-Alloy Cladding, J. Nucl. Mater., 2019, 519, p 247-254.10.1016/j.jnucmat.2019.03.039 ↗
73. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau and S.Y. Chang, Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes, Adv. Eng. Mater., 2004, 6(5), p 299-303.10.1002/adem.200300567 ↗
74. R. Nikbakht, C.V. Cojocaru, M. Aghasibeig, É. Irissou, T.S. Kim, H.S. Kim and B. Jodoin, Cold Spray and Laser-Assisted Cold Spray of CrMnCoFeNi High Entropy Alloy Using Nitrogen as the Propelling Gas, J. Therm. Spray Technol., 2022, 31, p 1129-1142.10.1007/s11666-022-01361-9 ↗
75. J.E. Ahn, Y.K. Kim, S.H. Yoon and K.A. Lee, Tuning the Microstructure and Mechanical Properties of Cold Sprayed Equiatomic CoCrFeMnNi High-Entropy Alloy Coating Layer, Met. Mater. Int., 2021, 27(7), p 2406-2415.10.1007/s12540-020-00886-4 ↗
76. Y. Xu, W. Li, L. Qu, X. Yang, B. Song, R. Lupoi and S. Yin, Solid-State Cold Spraying of FeCoCrNiMn High-Entropy Alloy: An Insight into Microstructure Evolution and Oxidation Behavior at 700-900 °C, J. Mater. Sci. Technol., 2021, 68, p 172-183.10.1016/j.jmst.2020.06.041 ↗
77. S. Yin, W. Li, B. Song, X. Yan, M. Kuang, Y. Xu, K. Wen and R. Lupoi, Deposition of FeCoNiCrMn High Entropy Alloy (HEA) Coating Via Cold Spraying, J. Mater. Sci. Technol., 2019, 35(6), p 1003-1007.10.1016/j.jmst.2018.12.015 ↗
78. R.B. Nair, G. Perumal and A. McDonald, Effect of Microstructure on Wear and Corrosion Performance of Thermally Sprayed AlCoCrFeMo High-Entropy Alloy Coatings, Adv. Eng. Mater., 2022, 24, p 9.
79. P. Han, W. Wang, Z. Liu, T. Zhang, Q. Liu, X. Guan, K. Qiao, D. Ye, J. Cai, Y. Xie, and K. Wang, Modification of Cold-Sprayed High-Entropy Alloy Particles Reinforced Aluminum Matrix Composites via Friction Stir Processing, J. Alloys. Compd., 907, 164426 (2022)10.1016/j.jallcom.2022.164426 ↗
80. A. Silvello, P. Cavaliere, S. Yin, R. Lupoi, I. Garcia Cano and S. Dosta, Microstructural, Mechanical and Wear Behavior of HVOF and Cold-Sprayed High-Entropy Alloys (HEAs) Coatings, J. Therm. Spray Technol., 2022, 31, p 1184-1206.10.1007/s11666-021-01293-w ↗
81. P. Cavaliere, A. Perrone, A. Silvello, A. Laska, G. Blasi, I.G. Cano, B. Sadeghi and S. Nagy, Cyclic Behavior of FeCoCrNiMn High Entropy Alloy Coatings Produced through Cold Spray, J. Alloys Compd., 2023, 931, p 167550.10.1016/j.jallcom.2022.167550 ↗
82. S.V. Klinkov and V.F. Kosarev, Measurements of Cold Spray Deposition Efficiency, J. Therm. Spray Technol., 2006, 15, p 364-371.10.1361/105996306X124365 ↗
83. H. Wang, J. Kang, W. Yue, G. Jin, R. Li, Y. Zhou, J. Liang and Y. Yang, Microstructure and Corrosive Wear Properties of CoCrFeNiMn High-Entropy Alloy Coatings, Materials, 2023, 16(1), p 55.10.3390/ma16010055 ↗
84. C.J. Akisin, C.J. Bennett, F. Venturi, H. Assadi and T. Hussain, Numerical and Experimental Analysis of the Deformation Behavior of CoCrFeNiMn High Entropy Alloy Particles onto Various Substrates During Cold Spraying, J. Therm. Spray Technol., 2022, 31, p 1085-1111.10.1007/s11666-022-01377-1 ↗
85. M.R. Rokni, S.R. Nutt, C.A. Widener, V.K. Champagne and R.H. Hrabe, Review of Relationship Between Particle Deformation Coating Microstructure, and Properties in High-Pressure Cold Spray, J. Therm. Spray Technol., 2017, 26(6), p 1308-1355.10.1007/s11666-017-0575-0 ↗
86. H. Assadi, T. Schmidt, H. Richter, J.O. Kliemann, K. Binder, F. Gärtner, T. Klassen and H. Kreye, On Parameter Selection in Cold Spraying, J. Therm. Spray Technol., 2011, 20, p 1161-1176.10.1007/s11666-011-9662-9 ↗
87. W. Wong, P. Vo, E. Irissou, A.N. Ryabinin, J.G. Legoux and S. Yue, Effect of Particle Morphology and Size Distribution on Cold-Sprayed Pure Titanium Coatings, J. Therm. Spray Technol., 2013, 22(7), p 1140-1153.10.1007/s11666-013-9951-6 ↗
88. R.S. Kiplangat, T.T. Lin, N.G. Kipkirui and S.H. Chen, Microstructure and Mechanical Properties of the Plasma-Sprayed and Cold-Sprayed Al0.5CoCrFeNi2Ti0.5 High-Entropy Alloy Coatings, J. Therm. Spray Technol., 2022, 31, p 1207-1221.10.1007/s11666-022-01356-6 ↗
89. X. Suo, S. Yin, M.P. Planche, T. Liu and H. Liao, Strong Effect of Carrier Gas Species on Particle Velocity during Cold Spray Processes, Surf. Coat. Technol., 2015, 268, p 90-93.10.1016/j.surfcoat.2014.04.039 ↗
90. J. Mahaffey, A. Vackel, S. Whetten, M. Melia and A.B. Kustas, Structure Evolution and Corrosion Performance of CoCrFeMnNi High Entropy Alloy Coatings Produced Via Plasma Spray and Cold Spray, J. Therm. Spray Technol., 2022, 31, p 1143-1154.10.1007/s11666-022-01373-5 ↗
91. D. MacDonald, S. Rahmati, B. Jodoin and W. Birtch, An Economical Approach to Cold Spray Using In-Line Nitrogen-Helium Blending, J. Therm. Spray Technol., 2019, 28(1-2), p 161-173.10.1007/s11666-018-0813-0 ↗
92. P. Yu, N. Fan, Y. Zhang, Z. Wang, W. Li, R. Lupoi and S. Yin, Microstructure Evolution and Composition Redistribution of FeCoNiCrMn High Entropy Alloy Under Extreme Plastic Deformation, Mater. Res. Lett., 2022, 10(3), p 124-132.10.1080/21663831.2021.2023678 ↗
93. L. Feng, W.J. Yang, K. Ma, Y.D. Yuan, G.S. An and W.S. Li, Microstructure and Properties of Cold Spraying AlCoCrCuFeNix HEA Coatings Synthesized by Induction Remelting, Mater. Technol., 2022, 37(13), p 2567-2579.10.1080/10667857.2022.2046929 ↗
94. J. Liu, K. Ma, Y. Ding, L. Feng, W. Li and L. Li, Microstructure and Properties of an FeCoCrAlCu HEA Coating Synthesized via the Induction Remelting Method, Coatings, 2023, 13(2), p 399.10.3390/coatings13020399 ↗
95. Y. Zou, Z. Qiu, C. Huang, D. Zeng, R. Lupoi, N. Zhang and S. Yin, Microstructure and Tribological Properties of Al2O3 Reinforced FeCoNiCrMn High Entropy Alloy Composite Coatings by Cold Spray, Surf. Coat. Technol., 2022, 434, p 128205.10.1016/j.surfcoat.2022.128205 ↗
96. D. Wei, X. Li, S. Schönecker, J. Jiang, W.M. Choi, B.J. Lee, H.S. Kim, A. Chiba and H. Kato, Development of Strong and Ductile Metastable Face-Centered Cubic Single-Phase High-Entropy Alloys, Acta Mater., 2019, 181, p 318-330.10.1016/j.actamat.2019.09.050 ↗
97. P. Yu, N. Fan, S. Yin, and R. Lupoi, Systematic Research on the Formation of Heterogenous Microstructure in FeCoNiCrMn High Entropy Cold Spray (2022)10.31399/asm.cp.itsc2022p0815 ↗
98. P. Han, J. Lin, W. Wang, Z. Liu, Y. Xiang, T. Zhang, Q. Liu, X. Guan, K. Qiao, Y. Xie, and K. Wang, Friction Stir Processing of Cold-Sprayed High-Entropy Alloy Particles Reinforced Aluminum Matrix Composites: Corrosion and Wear Properties, in Metals and Materials International (Korean Institute of Metals and Materials, 2022).10.1007/s12540-022-01248-y ↗
99. N. Fan, A. Rafferty, R. Lupoi, W. Li, Y. Xie, and S. Yin, Microstructure Evolution and Mechanical Behavior of Additively Manufactured CoCrFeNi High-Entropy Alloy Fabricated via Cold Spraying and Post-Annealing, Materials Science and Engineering: A, Elsevier BV, 2023, p 144748.10.1016/j.msea.2023.144748 ↗
100. S. Yin, J. Cizek, J. Cupera, M. Hassani, X. Luo, R. Jenkins, Y. Xie, W. Li and R. Lupoi, Formation conditions of vortex-like intermixing interfaces in cold spray, Mater. Des., 2021, 200, 109444.