Development and Characterization of Phosphate-Based Glass Coatings via Suspension High-Velocity Oxy-Fuel (SHVOF) Thermal Spray Process
Source abstract
Abstract
Abstract Phosphate-based glasses (PBGs) are promising materials for biomedical applications due to their biocompatible and fully resorbable characteristics in aqueous environments. These glasses can be coated onto metal substrate via the technique of suspension high-velocity oxy-fuel (SHVOF) thermal spraying to produce nanostructured coatings with improved physical and mechanical properties. PBGs coatings were produced using SHVOF thermal spray process at 50 and 75 kW flame power. The 75 kW coating was rougher (Ra = 3.6 ± 0.1 µm) than the 50 kW coating (Ra = 2.7 ± 0.1 µm), whereas the 50 kW coating was much thicker (24.6 ± 2.3 µm) than the 75 kW coating (16.0 ± 3.4 µm). Due to the rougher surface, the 75 kW coating showed high degradation and ion release rates. Moreover, structural changes were observed by Raman analysis, and the initial glass formulation contained Q1 (phosphate tetrahedra with one-bridging oxygen) and Q2 (phosphate tetrahedra with two-bridging oxygen) species. However, the coatings showed a reduction of Q2 species and higher concentrations of Q1 and Q0 (phosphate tetrahedra with no-bridging oxygen) species, which led to lower degradation rates and reduced ion release profiles in the glass coating compared to the initial glass.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Layered Double Hydroxides Synthesis and Applications · Luminescence Properties of Advanced Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. R.A. Velapoldi, L. Boehm and M.I. Shalom, Phosphate Glasses, 1971, 76, p 1–4.
2. I. Ahmed, H. Ren and J. Booth, Developing Unique Geometries of Phosphate-Based Glasses and their Prospective Biomedical Applications, Johnson Matthey Technol. Rev., 2018, 63(1), p 34–42. https://doi.org/10.1595/205651319x1542646005886310.1595/205651319x15426460058863 ↗
3. I. Ahmed, M. Lewis, I. Olsen and J.C. Knowles, Phosphate Glasses for Tissue Engineering: Part 1. Processing and Characterisation of a Ternary-Based P2O5-CaO-Na 2O Glass System, Biomaterials, 2004, 25(3), p 491–499. https://doi.org/10.1016/S0142-9612(03)00546-510.1016/S0142-9612(03)00546-5 ↗
4. E.A. Abou Neel et al., Doping of a High Calcium Oxide Metaphosphate Glass with Titanium Dioxide, J. Non. Cryst. Solids, 2009, 355(16–17), p 991–1000. https://doi.org/10.1016/j.jnoncrysol.2009.04.01610.1016/j.jnoncrysol.2009.04.016 ↗
5. D.S. Brauer, M.N. Anjum, M. Mneimne, R.M. Wilson, H. Doweidar and R.G. Hill, Fluoride-Containing Bioactive Glass-Ceramics, J. Non. Cryst. Solids, 2012, 358(12–13), p 1438–1442. https://doi.org/10.1016/j.jnoncrysol.2012.03.01410.1016/j.jnoncrysol.2012.03.014 ↗
6. E.A. Abou Neel et al., Structure and Properties of Strontium-Doped Phosphate-Based Glasses, J. R. Soc. Interface, 2009, 6(34), p 435–446. https://doi.org/10.1098/rsif.2008.034810.1098/rsif.2008.0348 ↗
7. J.C.K. Ensanya Ali Abou Neel and W. Chrzanowski, Effect of Increasing Titanium Dioxide Content on Bulk and Surface Properties of Phosphate-Based Glasses, Acta Biomater., 2008, 4(3), p 523–534. https://doi.org/10.1016/j.biomaterials.2004.07.02410.1016/j.biomaterials.2004.07.024 ↗
8. I. Ahmed et al., The Structure and Properties of Silver-Doped Phosphate-Based Glasses, J. Mater. Sci., 2007, 42(23), p 9827–9835. https://doi.org/10.1007/s10853-007-2008-910.1007/s10853-007-2008-9 ↗
9. E.A. Abou Neel, W. Chrzanowski and J.C. Knowles, Effect of Increasing Titanium Dioxide Content on Bulk and Surface Properties of Phosphate-Based Glasses, Acta Biomater., 2008, 4(3), p 523–534. https://doi.org/10.1016/j.actbio.2007.11.00710.1016/j.actbio.2007.11.007 ↗
10. I. Ahmed, C.A. Collins, M.P. Lewis, I. Olsen and J.C. Knowles, Processing, Characterisation and Biocompatibility of Iron-Phosphate Glass Fibres for Tissue Engineering, Biomaterials, 2004, 25(16), p 3223–3232. https://doi.org/10.1016/j.biomaterials.2003.10.01310.1016/j.biomaterials.2003.10.013 ↗
11. M.T. Islam, K.M.Z. Hossain, N. Sharmin, A.J. Parsons and I. Ahmed, Effect of Magnesium Content on Bioactivity of Near Invert Phosphate-Based Glasses, Int. J. Appl. Glas. Sci., 2017, 8(4), p 391–402. https://doi.org/10.1111/ijag.1232010.1111/ijag.12320 ↗
12. M.T. Islam, R.M. Felfel, E.A. Abou Neel, D.M. Grant, I. Ahmed and K.M.Z. Hossain, Bioactive Calcium Phosphate–Based Glasses and Ceramics and Their Biomedical Applications: A Review, J. Tissue Eng., 2017 https://doi.org/10.1177/204173141771917010.1177/2041731417719170 ↗
13. H. Gao, T. Tan and D. Wang, Dissolution Mechanism and Release Kinetics of Phosphate Controlled Release Glasses in Aqueous Medium, J. Control. Release, 2004, 96(1), p 29–36. https://doi.org/10.1016/j.jconrel.2003.12.03110.1016/j.jconrel.2003.12.031 ↗
14. B.C. Bunker, G.W. Arnold and J.A. Wilder, Phosphate Glass Dissolution in Aqueous Solutionsitle, J. Non. Cryst. Solids, 2021, 64(3), p 291–316.10.1016/0022-3093(84)90184-4 ↗
15. B.W. Stuart, M. Gimeno-Fabra, J. Segal, I. Ahmed and D.M. Grant, Degradation and Characterization of Resorbable Phosphate-Based Glass Thin-Film Coatings Applied by Radio-Frequency Magnetron Sputtering, ACS Appl. Mater. Interfaces, 2015, 7(49), p 27362–27372. https://doi.org/10.1021/acsami.5b0895710.1021/acsami.5b08957 ↗
16. E.A. Abou Neel et al., Effect of Iron on the Surface, Degradation and Ion Release Properties of Phosphate-Based Glass Fibres, Acta Biomater., 2005, 1(5), p 553–563. https://doi.org/10.1016/j.actbio.2005.05.00110.1016/j.actbio.2005.05.001 ↗
17. M.T. Islam, L. Macri-Pellizzeri, K.M.Z. Hossain, V. Sottile and I. Ahmed, “Effect of Varying the Mg with Ca Content in Highly Porous Phosphate-Based Glass Microspheres, Mater. Sci. Eng. C, 2021, 120, p 111668. https://doi.org/10.1016/j.msec.2020.11166810.1016/j.msec.2020.111668 ↗
18. K.M.Z. Hossain et al., Porous Calcium Phosphate Glass Microspheres for Orthobiologic Applications, Acta Biomater., 2018, 72, p 396–406. https://doi.org/10.1016/j.actbio.2018.03.04010.1016/j.actbio.2018.03.040 ↗
19. B.W. Stuart, J.J. Titman, M. Gimeno-Fabra, I. Ahmed and D.M. Grant, Insights into Structural Characterisation and Thermal Properties of Compositionally Equivalent Vapour-Condensed and Melt-Quenched Glasses, Mater. Des., 2016, 111, p 174–184. https://doi.org/10.1016/j.matdes.2016.08.06310.1016/j.matdes.2016.08.063 ↗
20. B. Stuart, M. Gimeno-Fabra, J. Segal, I. Ahmed and D.M. Grant, Preferential Sputtering in Phosphate Glass Systems for the Processing of Bioactive Coatings, Thin Solid Films, 2015, 589, p 534–542. https://doi.org/10.1016/j.tsf.2015.05.07210.1016/j.tsf.2015.05.072 ↗
21. P.J. Kelly and R.D. Arnell, Magnetron Sputtering: A Review of Recent Developments and Applications, Vacuum, 2000, 56(3), p 159–172. https://doi.org/10.1016/S0042-207X(99)00189-X10.1016/S0042-207X(99)00189-X ↗
22. S. Bano, I. Ahmed, D.M. Grant, A. Nommeots-Nomm and T. Hussain, Effect of processing on microstructure, mechanical properties and dissolution behaviour in SBF of Bioglass (45S5) coatings deposited by Suspension High Velocity Oxy Fuel (SHVOF) thermal spray, Surf. Coat. Technol., 2019, 372(May), p 229–238. https://doi.org/10.1016/j.surfcoat.2019.05.03810.1016/j.surfcoat.2019.05.038 ↗
23. G. Bolelli et al., Comparison between Suspension Plasma Sprayed and High Velocity Suspension Flame Sprayed bioactive coatings, Surf. Coat. Technol., 2015, 280, p 232–249. https://doi.org/10.1016/j.surfcoat.2015.08.03910.1016/j.surfcoat.2015.08.039 ↗
24. J.W. Murray, A.S.M. Ang, Z. Pala, E.C. Shaw and T. Hussain, Suspension High Velocity Oxy-Fuel (SHVOF)-Sprayed Alumina Coatings: Microstructure, Nanoindentation and Wear, J. Therm. Spray Technol., 2016, 25(8), p 1700–1710. https://doi.org/10.1007/s11666-016-0462-010.1007/s11666-016-0462-0 ↗
25. M. Bai, R. Khammas, L. Guan, J.W. Murray and T. Hussain, Suspension High Velocity Oxy-Fuel Spraying of a Rutile TiO2 Feedstock: Microstructure, Phase Evolution and Photocatalytic Behaviour, Ceram. Int., 2017, 43(17), p 15288–15295. https://doi.org/10.1016/j.ceramint.2017.08.06810.1016/j.ceramint.2017.08.068 ↗
26. B.W. Stuart, C.A. Grant, G.E. Stan, A.C. Popa, J.J. Titman and D.M. Grant, Gallium Incorporation into Phosphate Based Glasses: Bulk and Thin Film Properties, J. Mech. Behav. Biomed. Mater., 2018, 82(March), p 371–382. https://doi.org/10.1016/j.jmbbm.2018.03.04110.1016/j.jmbbm.2018.03.041 ↗
27. J.E. Pemberton, L. Latifzadeh, J.P. Fletcher and S.H. Risbud, Raman Spectroscopy of Calcium Phosphate Glasses with Varying CaO Modifier Concentrations, Chem. Mater., 1991, 3(1), p 195–200. https://doi.org/10.1021/cm00013a03910.1021/cm00013a039 ↗
28. A.K. Yadav and P. Singh, A Review of the Structures of Oxide Glasses by Raman Spectroscopy, RSC Adv., 2015, 5(83), p 67583–67609. https://doi.org/10.1039/c5ra13043c10.1039/c5ra13043c ↗
29. S. Kaoua, S. Krimi, A. El Jazouli, E.K. Hlil and D. de Waal, Preparation and Characterization of Phosphate Glasses Containing Titanium and Vanadium, J. Alloys Compd., 2007, 429(1–2), p 276–279. https://doi.org/10.1016/j.jallcom.2006.04.00410.1016/j.jallcom.2006.04.004 ↗
30. M.T. Islam et al., The Effect of MgO/TiO2 on Structural and Crystallization Behavior of Near Invert Phosphate-Based Glasses. J, Biomed. Mater. Res. Part B Appl. Biomater., 2019, 3, p 1–13. https://doi.org/10.1002/jbm.b.3442110.1002/jbm.b.34421 ↗
31. G. Bolelli, V. Cannillo, R. Gadow, A. Killinger, L. Lusvarghi and J. Rauch, Investigation of High-Velocity Suspension Flame Sprayed (HVSFS) , Ceram. Silikaty, 2010, 54(1), p 1–7. https://doi.org/10.1016/j.jeurceramsoc.2009.01.03210.1016/j.jeurceramsoc.2009.01.032 ↗
32. D. Groh, F. Döhler and D.S. Brauer, Bioactive Glasses with Improved Processing. Part 1. Thermal Properties, Ion Release and Apatite Formation, Acta Biomater., 2014, 10(10), p 4465–4473. https://doi.org/10.1016/j.actbio.2014.05.01910.1016/j.actbio.2014.05.019 ↗
33. B. Pföss, M. Höner, M. Wirth, A. Bührig-Polaczek, H. Fischer and R. Conradt, Structuring of Bioactive Glass Surfaces at the Micrometer Scale by Direct Casting Intended to Influence Cell Response, Biomed. Glas., 2016, 2(1), p 63–71. https://doi.org/10.1515/bglass-2016-000810.1515/bglass-2016-0008 ↗
34. R.G.C. Beerkens, Modeling the Kinetics of Volatilization from Glass Melts, J. Am. Ceram. Soc., 2001, 84(9), p 1952–1960. https://doi.org/10.1111/j.1151-2916.2001.tb00942.x10.1111/j.1151-2916.2001.tb00942.x ↗
35. D. M. Sanders, W. K. Haller, Effect of Water Vapor on Sodium Vaporization from Two Silica-Based Glasses, Am. Soc. Ceram., 1977, 60(3-4), p 138–141. https://doi.org/10.1111/j.1151-2916.1977.tb15489.x10.1111/j.1151-2916.1977.tb15489.x ↗
36. F. Pigeonneau, H. Kočárková and F. Rouyer, Stability of Vertical Films of Molten Glass Due to Evaporation, Colloids Surf. A Physicochem. Eng. Asp., 2012, 408, p 8–16. https://doi.org/10.1016/j.colsurfa.2012.04.01410.1016/j.colsurfa.2012.04.014 ↗
37. A. Kiani et al., Structural Characterization and Physical Properties of P2O5-CaO-Na2O-TiO2 Glasses by Fourier Transform Infrared, Raman and Solid-State Magic Angle Spinning Nuclear Magnetic Resonance Spectroscopies, Acta Biomater., 2012, 8(1), p 333–340. https://doi.org/10.1016/j.actbio.2011.08.02510.1016/j.actbio.2011.08.025 ↗
38. T. Moeller, Phosphorus and its Compounds. Volume I: Chemistry. J. Am. Chem. Soc., 1959, 81(11), p 2916. https://doi.org/10.1021/ja01520a08610.1021/ja01520a086 ↗
39. B.W. Stuart, M. Gimeno-Fabra, J. Segal, I. Ahmed and D.M. Grant, Mechanical, Structural and Dissolution Properties of Heat Treated Thin-Film Phosphate Based Glasses, Appl. Surf. Sci., 2017, 416, p 605–617. https://doi.org/10.1016/j.apsusc.2017.04.11010.1016/j.apsusc.2017.04.110 ↗