journal article·2024-12

Numerical Analysis of Quasicrystal Particle Behavior in the High-Velocity Oxygen Fuel (HVOF) Process

Mehdi Jadidi, Qimeng Yang, Alireza Rahimi, Kevin Golovin, Ali Dolatabadi

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Quasicrystal Structures and Properties · Solidification and crystal growth phenomena · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. E. Huttunen-Saarivirta, Microstructure, Fabrication and Properties of Quasicrystalline Al–Cu–Fe Alloys: A Review, J. Alloys Compd., 2004, 363(1–2), p 154-178. https://doi.org/10.1016/S0925-8388(03)00445-610.1016/S0925-8388(03)00445-6 ↗
2. Z.X. Wang, S.A. Zhang, Q. Xing, R.P. Yu, X.F. Gong, F.Y. Xiao and H. Wang, Microstructure and Properties of Al-Cu-Fe Quasicrystal Coating Prepared by Explosive Spraying, Surface Technology, Chongqing Wujiu Periodicals Press, 2023, 52(3), p 197-206.
3. J.-M. Dubois, Useful Quasicrystals, Useful Quasicrystals, World Scientific, 2005 https://doi.org/10.1142/358510.1142/3585 ↗
4. B.A. Silva Guedes de Lima, R. Medeiros Gomes, S.J. Guedes de Lima, D. Dragoe, M.-G. Barthes-Labrousse, R. Kouitat-Njiwa and J.-M. Dubois, Self-Lubricating, Low-Friction, Wear-Resistant Al-Based Quasicrystalline Coatings, Sci. Technol. Adv. Mater., 2016, 17(1), p 71-79. https://doi.org/10.1080/14686996.2016.115256310.1080/14686996.2016.1152563 ↗
5. S. Glotzer, The Hunt for Quasicrystals, Nature, 2019, 565(7738), p 156-158.10.1038/d41586-019-00026-y ↗
6. H.R. Trebin, Quasicrystals, Quasicrystals: Structure and Physical Properties. H. Trebin Ed., Wiley, 2003. https://doi.org/10.1002/352760657210.1002/3527606572 ↗
7. D.V. Louzguine-Luzgin and A. Inoue, Formation and Properties of Quasicrystals, Annu. Rev. Mater. Res., 2008, 38(1), p 403-423. https://doi.org/10.1146/annurev.matsci.38.060407.13031810.1146/annurev.matsci.38.060407.130318 ↗
8. A.F. Prekul, V.A. Kazantsev, N.I. Shchegolikhina, R.I. Gulyaeva and K. Edagawa, High-Temperature Heat Capacity of the Al63Cu25Fe12 Quasicrystal, Phys. Solid State, 2008, 50(11), p 2013-2015. https://doi.org/10.1134/S106378340811002410.1134/S1063783408110024 ↗
9. D.A. Rabson, Toward Theories of Friction and Adhesion on Quasicrystals, Prog. Surf. Sci., 2012, 87(9–12), p 253-271. https://doi.org/10.1016/j.progsurf.2012.10.00110.1016/j.progsurf.2012.10.001 ↗
10. J.-M. Dubois and E. Belin-Ferré, Wetting and Adhesion Properties of Quasicrystals and Complex Metallic Alloys, Appl. Adhesion Sci., 2015, 3(1), p 28. https://doi.org/10.1186/s40563-015-0046-010.1186/s40563-015-0046-0 ↗
11. J.-M. Dubois, Properties- and Applications of Quasicrystals and Complex Metallic Alloys, Chem. Soc. Rev., 2012, 41(20), p 6760. https://doi.org/10.1039/c2cs35110b10.1039/c2cs35110b ↗
12. Q. Yang, A. Dolatabadi and K. Golovin, Erosion-Resistant Materials Demonstrate Low Interfacial Toughness with Ice and Superior Durability, Mater. Horiz., 2023, 10(10), p 4541-4550. https://doi.org/10.1039/D3MH00885A10.1039/D3MH00885A ↗
13. Q. Yang, A. Dolatabadi, and K. Golovin, Durable Icephobic and Erosion Resistant Coatings Based on Quasicrystals, 2023, https://doi.org/10.4271/2023-01-1455.10.4271/2023-01-1455 ↗
14. M. Mohseni, L. Recla, J. Mora, P.G. Gallego, A. Agüero and K. Golovin, Quasicrystalline Coatings Exhibit Durable Low Interfacial Toughness with Ice, ACS Appl. Mater. Interfaces, 2021, 13(30), p 36517-36526. https://doi.org/10.1021/acsami.1c0874010.1021/acsami.1c08740 ↗
15. K. Golovin, A. Dhyani, M.D. Thouless and A. Tuteja, Low-Interfacial Toughness Materials for Effective Large-Scale Deicing, Science, 2019, 364(6438), p 371-375. https://doi.org/10.1126/science.aav126610.1126/science.aav1266 ↗
16. J. Mora, P. García, R. Muelas and A. Agüero, Hard Quasicrystalline Coatings Deposited by HVOF Thermal Spray to Reduce Ice Accretion in Aero-Structures Components, Coatings, 2020, 10(3), p 290. https://doi.org/10.3390/coatings1003029010.3390/coatings10030290 ↗
17. W. Wolf, R. Schulz, S. Savoie, C. Bolfarini, C.S. Kiminami and W.J. Botta, Structural, Mechanical and Thermal Characterization of an Al-Co-Fe-Cr Alloy for Wear and Thermal Barrier Coating Applications, Surf. Coat. Technol., 2017, 319, p 241-248. https://doi.org/10.1016/j.surfcoat.2017.03.06610.1016/j.surfcoat.2017.03.066 ↗
18. T. Eisenhammer, Quasicrystal Films: Numerical Optimization as a Solar Selective Absorber, Thin Solid Films, 1995, 270(1–2).10.1016/0040-6090(95)06833-3 ↗
19. T. Eisenhammer, A. Haugeneder, and A. Mahr, High-Temperature Optical Properties and Stability of Selective Absorbers Based on Quasicrystalline AlCuFe, Solar Energy Materials and Solar Cells, 1998, 54(1–4).10.1016/S0927-0248(98)00089-0 ↗
20. N.W. Khun, R.T. Li, K. Loke and K.A. Khor, Effects of Al-Cr-Fe Quasicrystal Content on Tribological Properties of Cold-Sprayed Titanium Composite Coatings, Tribol. Trans., 2015, 58(4), p 616-624. https://doi.org/10.1080/10402004.2014.99186010.1080/10402004.2014.991860 ↗
21. A.P.M. de Araujo, F.B.D.M. Carmelo, E.M. Rocha, C.S. Kiminami and P. Gargarella, Effects of Process Parameters on Cold Spray Additive Manufacturing of Quasicrystalline Al93Fe3Cr2Ti2 Alloy, Powders, 2023, 2(3), p 525-539. https://doi.org/10.3390/powders203003310.3390/powders2030033 ↗
22. E. Huttunen-Saarivirta, E. Turunen and M. Kallio, Influence of Cr Alloying on the Microstructure of Thermally Sprayed Quasicrystalline Al–Cu–Fe Coatings, Intermetallics (Barking), 2003, 11(9), p 879-891. https://doi.org/10.1016/S0966-9795(03)00097-910.1016/S0966-9795(03)00097-9 ↗
23. M. Xiao, X. Liu, S. Zeng, Z. Zheng, G. Wang, Z. Qiu, M. Liu and D. Zeng, Effects of Particle Size on the Microstructure and Mechanical Properties of HVAF-Sprayed Al-Based Quasicrystalline Coatings, J. Therm. Spray Technol., 2021, 30(5), p 1380-1392. https://doi.org/10.1007/s11666-021-01202-110.1007/s11666-021-01202-1 ↗
24. E. Fleury, S.M. Lee, W.T. Kim and D.H. Kim, Effects of Air Plasma Spraying Parameters on the Al–Cu–Fe Quasicrystalline Coating Layer, J. Non Cryst. Solids, 2000, 278(1–3), p 194-204. https://doi.org/10.1016/S0022-3093(00)00321-510.1016/S0022-3093(00)00321-5 ↗
25. W. Wolf, G.Y. Koga, R. Schulz, S. Savoie, C.S. Kiminami, C. Bolfarini and W.J. Botta, Wear and Corrosion Performance of Al-Cu-Fe-(Cr) Quasicrystalline Coatings Produced by HVOF, J. Therm. Spray Technol., 2020, 29(5), p 1195-1207. https://doi.org/10.1007/s11666-020-01053-210.1007/s11666-020-01053-2 ↗
26. H. Parsamehr, T.-S. Chen, D.-S. Wang, M.-S. Leu, I. Han, Z. Xi, A.-P. Tsai, A.J. Shahani and C.-H. Lai, Thermal Spray Coating of Al-Cu-Fe Quasicrystals: Dynamic Observations and Surface Properties, Materialia (Oxf), 2019, 8, 100432. https://doi.org/10.1016/j.mtla.2019.10043210.1016/j.mtla.2019.100432 ↗
27. T.A. Souza, D.D.S. Silva, F.W.E.L.A. Júnior, F.R.P. Feitosa, R.M. Gomes and B.A.S.G. Lima, Analysis of the Surface Properties of Al–Cu–Fe–B and Al–Co–Cu Quasicrystalline Coatings Produced by HVOF, MRS Commun., 2021, 11(6), p 873878. https://doi.org/10.1557/s43579-021-00112-110.1557/s43579-021-00112-1 ↗
28. E. Huttunen-Saarivirta, E. Turunen and M. Kallio, Microstructural Characterisation of Thermally Sprayed Quasicrystalline Al–Co–Fe–Cr Coatings, J. Alloys Compd., 2003, 354(1–2), p 269-280. https://doi.org/10.1016/S0925-8388(02)01361-010.1016/S0925-8388(02)01361-0 ↗
29. S.M. Lee, E. Fleury, J.S. Kim, Y.C. Kim, D.H. Kim, W.T. Kim and H.S. Ahn, Potential Industrial Applications of Al-Based Quasicrystals: Plasma Sprayed vs. HVOF Sprayed Coatings, MRS Proc., 2000, 643, p K152. https://doi.org/10.1557/PROC-643-K15.210.1557/PROC-643-K15.2 ↗
30. Y. Fu, T. Peng, D. Yang, C. Sun, Y. Chen and Y. Gao, HVOF Sprayed Al–Cu–Cr Quasicrystalline Coatings from Coarse Feedstock Powders, Surf. Coat. Technol., 2014, 252, p 29-34. https://doi.org/10.1016/j.surfcoat.2014.05.00310.1016/j.surfcoat.2014.05.003 ↗
31. F.R.P. Feitosa, R.M. Gomes, M.M.R. Silva, S.J.G. De Lima and J.M. Dubois, Effect of Oxygen/Fuel Ratio on the Microstructure and Properties of HVOF-Sprayed Al59Cu25.5Fe12.5B3 Quasicrystalline Coatings, Surf. Coat. Technol., 2018, 353, p 171-178. https://doi.org/10.1016/j.surfcoat.2018.08.08110.1016/j.surfcoat.2018.08.081 ↗
32. A. Vardelle, C. Moreau, J. Akedo, H. Ashrafizadeh, C.C. Berndt, J.O. Berghaus, M. Boulos, J. Brogan, A.C. Bourtsalas, A. Dolatabadi, M. Dorfman, T.J. Eden, P. Fauchais, G. Fisher, F. Gaertner, M. Gindrat, R. Henne, M. Hyland, E. Irissou, E.H. Jordan, K.A. Khor, A. Killinger, Y.-C. Lau, C.-J. Li, L. Li, J. Longtin, N. Markocsan, P.J. Masset, J. Matejicek, G. Mauer et al., The 2016 Thermal Spray Roadmap, J. Therm. Spray Technol., 2016, 25(8), p 1376-1440. https://doi.org/10.1007/s11666-016-0473-x10.1007/s11666-016-0473-x ↗
33. P.L. Fauchais, J.V.R. Heberlein and M.I. Boulos, Thermal Spray Fundamentals . Thermal Spray Fundamentals: From Powder to Part, Springer, Boston, 2014.10.1007/978-0-387-68991-3 ↗
34. M. Jadidi, S. Moghtadernejad and A. Dolatabadi, A Comprehensive Review on Fluid Dynamics and Transport of Suspension/Liquid Droplets and Particles in High-Velocity Oxygen-Fuel (HVOF) Thermal Spray, Coatings, 2015, 5(4), p 576-645. https://doi.org/10.3390/coatings504057610.3390/coatings5040576 ↗
35. S. Kamnis, S. Gu, T.J. Lu and C. Chen, Computational Simulation of Thermally Sprayed WC–Co Powder, Comput. Mater. Sci., 2008, 43(4), p 1172-1182. https://doi.org/10.1016/j.commatsci.2008.03.01510.1016/j.commatsci.2008.03.015 ↗
36. S. Kamnis, S. Gu and N. Zeoli, Mathematical Modelling of Inconel 718 Particles in HVOF Thermal Spraying, Surf. Coat. Technol., 2008, 202(12), p 2715-2724. https://doi.org/10.1016/j.surfcoat.2007.10.00610.1016/j.surfcoat.2007.10.006 ↗
37. M. Li, D. Shi and P.D. Christofides, Modeling and Control of HVOF Thermal Spray Processing of WC–Co Coatings, Powder Technol., 2005, 156(2–3), p 177-194. https://doi.org/10.1016/j.powtec.2005.04.01110.1016/j.powtec.2005.04.011 ↗
38. S. Gu, D.G. McCartney, C.N. Eastwick and K. Simmons, Numerical Modeling of In-Flight Characteristics of Inconel 625 Particles During High-Velocity Oxy-Fuel Thermal Spraying, J. Therm. Spray Technol., 2004, 13(2), p 200-213. https://doi.org/10.1361/1059963041933710.1361/10599630419337 ↗
39. C. Li, S. Li and X. Han, The Study on Flow Field Simulation and WC-12Co Multi-Layer Coating Growth in High-Velocity Oxygen-Fuel (HVOF) Thermal Spraying, J. Therm. Spray Technol., 2024, 33(4), p 1135-1157. https://doi.org/10.1007/s11666-024-01724-410.1007/s11666-024-01724-4 ↗
40. J. Yu, X. Liu, Y. Yu, H. Li, P. Liu, R. Sun, L. Wang and P. Li, Numerical Analysis of High-Velocity Oxygen Fuel Thermal-Spray Process for Fe-Based Amorphous Coatings, Coatings, 2021, 11(12), p 1533. https://doi.org/10.3390/coatings1112153310.3390/coatings11121533 ↗
41. C. Li, X. Gao, D. Zhang, H. Gao, X. Han and B. Zhang, Numerical Investigation on the Flame Characteristics and Particle Behaviors in a HVOF Spray Process Using Kerosene as Fuel, J. Therm. Spray Technol., 2021, 30(3), p 725-738. https://doi.org/10.1007/s11666-021-01165-310.1007/s11666-021-01165-3 ↗
42. J. Yu, X. Liu, Y. Yu, Z. Li, S. Xu, H. Li, P. Liu and L. Wang, Effect of HVOF Spraying Process on Particle Behavior of Fe-Based Amorphous Alloy Coatings, J. Therm. Spray Technol., 2022, 31(8), p 2448-2462. https://doi.org/10.1007/s11666-022-01476-z10.1007/s11666-022-01476-z ↗
43. S. Chadha, R. Jefferson-Loveday and T. Hussain, Effect of Nozzle Geometry on the Gas Dynamics and Evaporation Rates of Suspension High Velocity Oxy Fuel (SHVOF) Thermal Spray: A Numerical Investigation, Surf. Coat. Technol., 2019, 371, p 78-89. https://doi.org/10.1016/j.surfcoat.2018.10.08510.1016/j.surfcoat.2018.10.085 ↗
44. S. Chadha, R. Jefferson-Loveday and T. Hussain, Modelling Knudsen Number Effects in Suspension High Velocity Oxy Fuel Thermal Spray, Int. J. Heat Mass Transf., 2020, 152, 119454. https://doi.org/10.1016/j.ijheatmasstransfer.2020.11945410.1016/j.ijheatmasstransfer.2020.119454 ↗
45. S. Chadha, R. Jefferson-Loveday, F. Venturi and T. Hussain, A Computational and Experimental Investigation into Radial Injection for Suspension High Velocity Oxy-Fuel (SHVOF) Thermal Spray, J. Therm. Spray Technol., 2019, 28(6), p 1126-1145. https://doi.org/10.1007/s11666-019-00888-810.1007/s11666-019-00888-8 ↗
46. M. Jadidi, A.Z. Yeganeh and A. Dolatabadi, Numerical Study of Suspension HVOF Spray and Particle Behavior Near Flat and Cylindrical Substrates, J. Therm. Spray Technol., 2018, 27(1–2), p 59-72. https://doi.org/10.1007/s11666-017-0656-010.1007/s11666-017-0656-0 ↗
47. M. Jadidi, S. Moghtadernejad and A. Dolatabadi, Numerical Modeling of Suspension HVOF Spray, J. Therm. Spray Technol., 2016, 25(3), p 451-464. https://doi.org/10.1007/s11666-015-0364-610.1007/s11666-015-0364-6 ↗
48. A. Fluent, Ansys Fluent Theory Guide, ANSYS Inc., USA, 2013.
49. A. Dolatabadi, J. Mostaghimi and V. Pershin, Effect of a Cylindrical Shroud on Particle Conditions in High Velocity Oxy-Fuel Spray Process, Sci. Technol. Adv. Mater., 2002, 3(3), p 245-255. https://doi.org/10.1016/S1468-6996(02)00023-210.1016/S1468-6996(02)00023-2 ↗
50. M. Taleby and S. Hossainpour, Numerical Investigation of High Velocity Suspension Flame Spraying, J. Therm. Spray Technol., 2012, 21(6), p 1163-1172. https://doi.org/10.1007/s11666-012-9802-x10.1007/s11666-012-9802-x ↗
51. E. Gozali, S. Kamnis and S. Gu, Numerical Investigation of Combustion and Liquid Feedstock in High Velocity Suspension Flame Spraying Process, Surf. Coat. Technol., 2013, 228, p 176-186. https://doi.org/10.1016/j.surfcoat.2013.04.02610.1016/j.surfcoat.2013.04.026 ↗
52. E. Gozali, M. Mahrukh, S. Gu and S. Kamnis, Numerical Analysis of Multicomponent Suspension Droplets in High-Velocity Flame Spray Process, J. Therm. Spray Technol., 2014, 23(6), p 940-949. https://doi.org/10.1007/s11666-014-0106-110.1007/s11666-014-0106-1 ↗
53. S. Kamnis and S. Gu, 3-D Modelling of Kerosene-Fuelled HVOF Thermal Spray Gun, Chem. Eng. Sci., 2006, 61(16), p 5427-5439. https://doi.org/10.1016/j.ces.2006.04.00510.1016/j.ces.2006.04.005 ↗
54. S. Gordon and B.J. McBride, Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications, Lewis Research Center, Cleveland, 1994.
55. S. Garmeh, M. Jadidi, J.-M. Lamarre and A. Dolatabadi, Cold Spray Gas Flow Dynamics for On and Off-Axis Nozzle/Substrate Hole Geometries, J. Therm. Spray Technol., 2023, 32(1), p 208-225. https://doi.org/10.1007/s11666-022-01487-w10.1007/s11666-022-01487-w ↗
56. E. Loth, Compressibility and Rarefaction Effects on Drag of a Spherical Particle, AIAA J., 2008, 46(9), p 2219-2228. https://doi.org/10.2514/1.2894310.2514/1.28943 ↗
57. B. Fikus, C. Senderowski and A.J. Panas, Modeling of Dynamics and Thermal History of Fe40Al Intermetallic Powder Particles Under Gas Detonation Spraying Using Propane-Air Mixture, J. Therm. Spray Technol., 2019, 28(3), p 346-358.10.1007/s11666-019-00836-6 ↗
58. M. Li and P.D. Christofides, Multi-Scale Modeling and Analysis of an Industrial HVOF Thermal Spray Process, Chem. Eng. Sci., 2005, 60(13), p 3649-3669.10.1016/j.ces.2005.02.043 ↗
59. M. Li and P.D. Christofides, Computational Study of Particle In-Flight Behavior in the HVOF Thermal Spray Process, Chem. Eng. Sci., 2006, 61(19), p 6540-6552.10.1016/j.ces.2006.05.050 ↗
60. L.L. Kavanau, Heat Transfer From Spheres to a Rarefied Gas in Subsonic Flow, J. Fluids Eng., 1955, 77(5), p 617-623. https://doi.org/10.1115/1.401444510.1115/1.4014445 ↗
61. A. Zabihi Yeganeh, M. Jadidi, C. Moreau and A. Dolatabadi, Numerical Modeling of Aerosol Deposition Process, Surf. Coat. Technol., 2019, 370, p 269-287. https://doi.org/10.1016/j.surfcoat.2019.04.09410.1016/j.surfcoat.2019.04.094 ↗
62. B. Farahani, M. Jadidi and S. Moghtadernejad, Compressibility and Rarefaction Effects on Particle Dynamics and Heat Transfer in Aerosol Deposition Process, Coatings, 2022, 12(10), p 1578. https://doi.org/10.3390/coatings1210157810.3390/coatings12101578 ↗
63. F. Jabbari, M. Jadidi, R. Wuthrich and A. Dolatabadi, A Numerical Study of Suspension Injection in Plasma-Spraying Process, J. Therm. Spray Technol., 2014, 23(1–2), p 3-13. https://doi.org/10.1007/s11666-013-0030-910.1007/s11666-013-0030-9 ↗
64. M. Jadidi, M. Mousavi, S. Moghtadernejad and A. Dolatabadi, A Three-Dimensional Analysis of the Suspension Plasma Spray Impinging on a Flat Substrate, J. Therm. Spray Technol., 2014, 24, p 11-23. https://doi.org/10.1007/s11666-014-0166-210.1007/s11666-014-0166-2 ↗
65. C. Dong and J.M. Dubois, Quasicrystals and Crystalline Phases in Al65Cu20Fe10Cr5 Alloy, J. Mater. Sci., 1991, 26(6), p 1647-1654. https://doi.org/10.1007/BF0054467710.1007/BF00544677 ↗
66. A. Dolatabadi, J. Mostaghimi and V. Pershin, Modeling Dense Suspension of Solid Particles in Highly Compressible Flows, Int J Comut Fluid Dyn, 2004, 18(2), p 125-131. https://doi.org/10.1080/1061856031000163422110.1080/10618560310001634221 ↗
67. H. Koivuluoto and P. Vuoristo, Structural Analysis of Cold-Sprayed Nickel-Based Metallic and Metallic-Ceramic Coatings, J. Therm. Spray Technol., 2010, 19(5), p 975-989. https://doi.org/10.1007/s11666-010-9481-410.1007/s11666-010-9481-4 ↗
68. H. Zhou, Microstructure Control and Properties of Cold-Sprayed Titanium and Its Alloy Coatings, Mater. Sci. Technol., 2021, 37(2), p 121-143. https://doi.org/10.1080/02670836.2020.186868910.1080/02670836.2020.1868689 ↗
69. H. Koivuluoto and P. Vuoristo, Effect of Ceramic Particles on Properties of Cold-Sprayed Ni-20Cr+Al2O3 Coatings, J. Therm. Spray Technol., 2009, 18(4), p 555-562. https://doi.org/10.1007/s11666-009-9345-y10.1007/s11666-009-9345-y ↗
70. B. Song, M. Bai, K.T. Voisey and T. Hussain, Role of Oxides and Porosity on High-Temperature Oxidation of Liquid-Fueled HVOF Thermal-Sprayed Ni50Cr Coatings, J. Therm. Spray Technol., 2017, 26(3), p 554-568. https://doi.org/10.1007/s11666-017-0531-z10.1007/s11666-017-0531-z ↗