journal article·2025-03Open access

Microstructural and Mechanical Properties of WC-17Co Deposited Using Laser Direct Energy Deposition (LDED) and High-Velocity Oxygen Fuel (HVOF)

Fardad Azarmi, Theresa Grabowski, Martin McDonnell

Journal of Thermal Spray Technology· Volume 34· Issue 2-3

Abstract

Abstract Recently, laser deposition technologies have made significant advancements in their ability to manufacture high-temperature metals and ceramics. One of these technologies, known as laser direct energy deposition (LDED), has the potential to deposit a wide range of materials from polymers to refractory materials, ceramics and functionally graded materials. This study evaluates major microstructural characteristics of WC-17 Co additively manufactured by LDED technology. A LDED-manufactured WC-Co sample was examined by optical microscopy (OM), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and x-ray diffraction (XRD). Electron backscatter diffraction (EBSD) experiment was also performed to validate results obtained from XRD test. This material is commonly used for deposition of protective coatings due to its high hardness and excellent wear resistance. To this end, hardness and wear resistance of the LDED-processed samples were also investigated in this study. All the tests were also repeated on high-velocity oxygen fuel (HVOF)-deposited WC-Co with the same composition for the purpose of comparison. LDED sample showed slightly higher porosity (~4%) compared to the HVOF one (~3%). Both samples experience decomposition of the carbides into compound phases as indicated by XRD results. EBSD test results also confirmed the ones obtained from XRD and detected WC, Co, W2C, and W3Co3C in both samples while some more complex phases such as W9Co3C4 was found in LDED sample. The LDED-deposited sample also displays unique dendritic and eutectic structures that improve the hardness and wear properties compared to the homogenous HVOF coating instead of higher porosity level. The higher wear resistance of LDED sample is also associated with its higher hardness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Y. Yang, C. Zhang, D. Wang, L. Nie, D. Wellmann and Y. Tian, Additive manufacturing of WC-Co hardmetals: a review, Int. J. Adv. Manuf. Technol., 2020, 108(5–6), p 1653–1673.10.1007/s00170-020-05389-5 ↗
2. J. He and J.M. Schoenung, A review on nanostructured WC–Co coatings, Surf. Coat. Technol., 2002, 157(1), p 72–79. https://doi.org/10.1016/S0257-8972(02)00141-X10.1016/S0257-8972(02)00141-X ↗
3. S. Eshkabilov, I. Ara and F. Azarmi, A comprehensive investigation on application of machine learning for optimization of process parameters of laser powder bed fusion-processed 316L stainless steel, Int. J. Adv. Manuf. Technol., 2022, 123, p 2733–2756. https://doi.org/10.1007/s00170-022-10331-y10.1007/s00170-022-10331-y ↗
4. T. Grabowski, I. Ara, J. Thorpe et al., Investigation of microstructural characteristics of cobalt chromium molybdenum additively manufactured using laser directed energy deposition technology, Metal Mater. Trans. A, 2023, 54, p 4065–4079. https://doi.org/10.1007/s11661-023-07154-110.1007/s11661-023-07154-1 ↗
5. S. Eshkabilov, I. Ara, I. Sevostianov, F. Azarmi and X. Tangpong, Mechanical and thermal properties of stainless steel parts, manufactured by various technologies, in relation to their microstructure, Int. J. Eng. Sci., 2021, 159, p 103398. https://doi.org/10.1016/j.ijengsci.2020.10339810.1016/j.ijengsci.2020.103398 ↗
6. K.Q. AlHamad, B.A. Al-Rashdan, J.Q. Ayyad, L.M. AlOmrani, A.M. Sharoh, A.M. AlNimri et al., Additive manu-facturing of dental ceramics: a systematic review and meta-analysis, J. Prosthodont., 2022, 31, p e67–e86. https://doi.org/10.1111/jopr.1355310.1111/jopr.13553 ↗
7. H. KursatCelik, S. Koc, A. Kustarci, N. Caglayan and A.E.W. Rennie, The state of additive manu-facturing in dental research–A systematic scoping review of 2012–2022, Heliyon, 2023, 9(6), p e17462. https://doi.org/10.1016/j.heliyon.2023.e1746210.1016/j.heliyon.2023.e17462 ↗
8. T. Grabowski, D. Gerner, F. Azarmi et al., Microstructural evaluation of tungsten carbide cobalt (WC-17Co) alloy deposited by high-velocity oxygen fuel, high-velocity air fuel, and cold spraying technologies, J. Therm. Spray. Tech., 2023 https://doi.org/10.1007/s11666-023-01707-x10.1007/s11666-023-01707-x ↗
9. K.-W. Kim, G.-S. Ham, S.-H. Park, J.-W. Cho and K.-A. Lee, Direct energy deposition of ultrastrong WC-12Co cemented carbide: fabrication, microstructure and compressive properties, Int. J. Refrac. Metals Hard Mater., 2021, 99, p 105591. https://doi.org/10.1016/j.ijrmhm.2021.10559110.1016/j.ijrmhm.2021.105591 ↗
10. E. Liverani, A. Ascari and A. Fortunato, Multilayered WC–Co coatings by direct energy deposition-based cladding: effect of laser remelting on interface defects, Surf. Coat. Technol., 2023, 464, p 129556. https://doi.org/10.1016/j.surfcoat.2023.12955610.1016/j.surfcoat.2023.129556 ↗
11. A.M. Venter, O.P. Oladijo, V. Luzin, L.A. Cornish and N. Sacks, Performance characterization of metallic substrates coated by HVOF WC–Co, Thin Solid Films, 2013, 549, p 330–339. https://doi.org/10.1016/j.tsf.2013.08.07510.1016/j.tsf.2013.08.075 ↗
12. S. Brossard, P.R. Munroe and M.M. Hyland, Study of the splat formation for HVOF sprayed NiCr on stainless steel substrates and the effects of heating and boiling pre-treatments, J. Therm. Spray. Tech., 2010, 19, p 990–1000. https://doi.org/10.1007/s11666-010-9502-310.1007/s11666-010-9502-3 ↗
13. X. Luo, G.M. Smith, Y. Wang, E. Gildersleeve, S. Sampath and C. Li, Cracking induced tribological behavior changes for the HVOF WC-12Co cermet coating, Ceram. Int., 2019, 45(4), p 4718–4728. https://doi.org/10.1016/j.ceramint.2018.11.16410.1016/j.ceramint.2018.11.164 ↗
14. M. Hu, J.-C. Tang, X.-G. Chen, N. Ye, X.-Y. Zhao and M.-M. Xu, Microstructure and properties of WC-12Co composite coatings prepared by laser cladding, Trans. Nonferrous Metals Soc. China, 2020, 30(4), p 1017–1030. https://doi.org/10.1016/S1003-6326(20)65273-610.1016/S1003-6326(20)65273-6 ↗
15. K.-W. Kim, A.B. Kale, Y.-H. Cho, S.-H. Park and K.-A. Lee, Microstructural and wear proper-ties of WC-12Co cemented carbide fabricated by direct energy deposition, Wear, 2023, 518–519, p 204653. https://doi.org/10.1016/j.wear.2023.20465310.1016/j.wear.2023.204653 ↗
16. P. Chivavibul, M. Watanabe, S. Kuroda and K. Shinoda, Effects of carbide size and Co content on the microstructure and mechanical properties of HVOF-sprayed WC–Co coatings, Surf. Coat. Technol., 2007, 202(3), p 509–521. https://doi.org/10.1016/j.surfcoat.2007.06.02610.1016/j.surfcoat.2007.06.026 ↗
17. A. Ghabchi, T. Varis, E. Turunen, T. Suhonen, X. Liu and S.P. Hannula, Behavior of HVOF WC-10Co4Cr coatings with different carbide size in fine and coarse particle abrasion, J. Therm. Spray Technol., 2010, 19(1–2), p 368–377. https://doi.org/10.1007/s11666-009-9433-z10.1007/s11666-009-9433-z ↗
18. C. Morales, A. Fortini, C. Soffritti and M. Merlin, Effect of post-fabrication heat treatments on the microstructure of WC-12Co direct energy depositions, Coatings, 2023, 13, p 1459. https://doi.org/10.3390/coatings1308145910.3390/coatings13081459 ↗
19. A. Raza, F. Ahmad, T.M. Badri, M.R. Raza and K. Malik, An influence of oxygen flow rate and spray distance on the porosity of HVOF coating and its effects on corrosion-a review, Materials, 2022 https://doi.org/10.3390/ma1518632910.3390/ma15186329 ↗
20. J. Matthews et al., Carbide dissolution in WC-17Co thermal spray coatings: Part 1-project concept and as-sprayed coatings, J. Alloy. Compd., 2021, 856, 157464. https://doi.org/10.1016/j.jallcom.2020.15746410.1016/j.jallcom.2020.157464 ↗
21. X. An, Y. Li, S. Ni, Z. Wang and M. Song, Microstructural and hardness evolutions of a cold-rolled cobalt, Mater. Sci. Eng., 2021, 803, 140712. https://doi.org/10.1016/j.msea.2020.14071210.1016/j.msea.2020.140712 ↗
22. W. Li, W. Liu, Z. Liu, Z. Wang, Y. Xia, H. Liu, Y. Huang, Z. Ma, J. Song, F. Wang, S. Liu and Y. Zhang, Effect of CNT content on the micro structure and friction characteristics of LDED-fabricated CNTs-Ni60/WC coatings, Surf. Coat. Technol., 2023, 473, p 129938. https://doi.org/10.1016/j.surfcoat.2023.12993810.1016/j.surfcoat.2023.129938 ↗
23. C. Jiang, J. Zhang, Y. Chen, Z. Hou, Q. Zhao, Y. Li, L. Zhu, F. Zhang and Y. Zhao, On enhancing wear resistance of titanium alloys by laser cladded WC-Co composite coatings, Int. J. Refrac. Metals Hard Mater., 2022, 107, p 105902. https://doi.org/10.1016/j.ijrmhm.2022.10590210.1016/j.ijrmhm.2022.105902 ↗
24. W. Wang, S. Zhang, S. Xiao, Y.S. Sato, D. Wang, Y. Liu, D. Liu and H. Qiang, Microstructure and properties of multilayer WC-40Co coating on Ti-6Al-4V by electron beam cladding, Mater Charact, 2022, 183, p 111585. https://doi.org/10.1016/j.matchar.2021.11158510.1016/j.matchar.2021.111585 ↗
25. I. Konyashin, H. Hinners, B. Ries, A. Kirchner, B. Klöden, B. Kieback, R.W.N. Nilen and D. Sidorenko, Additive manufacturing of WC-13%Co by selective electron beam melting: achievements and challenges, Int. J. Refract. Met. Hard. Mater., 2019, 84, p 84. https://doi.org/10.1016/j.ijrmhm.2019.10502810.1016/j.ijrmhm.2019.105028 ↗
26. X. Yan, Y. Zheng, Y. Qiu, G. Qiao, D. Wei, H. He and Q. Bai, Role of reinforcement on the mi-crostructure of WC reinforced Fe-based composite coating prepared by direct energy deposition, Mater Charact, 2024, 209, p 113731. https://doi.org/10.1016/j.matchar.2024.11373110.1016/j.matchar.2024.113731 ↗
27. N. Simionescu, L. Benea and J.P. Celis, Wear-corrosion response of Cerium oxide reinforced Cobalt hybrid composite layers in biological solution, IOP Conf. Ser.: Mater. Sci. Eng., 2019, 572, p 012003. https://doi.org/10.1088/1757-899X/572/1/01200310.1088/1757-899X/572/1/012003 ↗
28. N. Ley, S.S. Joshi, B. Zhang, Y.-H. Ho, N.B. Dahotre and M.L. Young, Laser coating of a CrMoTaWZr complex concentrated alloy onto a H13 tool steel die head, Surf. Coat. Technol., 2018, 348, p 150–158. https://doi.org/10.1016/j.surfcoat.2018.02.03810.1016/j.surfcoat.2018.02.038 ↗
29. K. Murugan, A. Ragupathy, V. Balasubramanian and K. Sridhar, Optimizing HVOF spray process parameters to attain minimum porosity and maximum hardness in WC–10Co–4CR Coatings, Surf. Coat. Technol., 2014, 247, p 90–102. https://doi.org/10.1016/j.surfcoat.2014.03.02210.1016/j.surfcoat.2014.03.022 ↗
30. T. Chandanayaka and F. Azarmi, Investigation on the effect of reinforcement particle size on the mechanical properties of the cold sprayed Ni-Ni3Al composites, J. Mater. Eng. Perform., 2014, 23, p 1815–1822. https://doi.org/10.1007/s11665-014-0941-810.1007/s11665-014-0941-8 ↗
31. M. Ksiazek, I. Nejman and L. Boron, Investigation on microstructure, mechanical and wear properties of HVOF sprayed composite coatings (WC–Co + CR) on ductile cast iron, Materials., 2021, 14(12), p 3282. https://doi.org/10.3390/ma1412328210.3390/ma14123282 ↗