journal article·2026-03Open access

In-Depth Microstructural Analysis of High-Performance Nickel Chromium Coating with Complex Composition

Nadia Akter, Fardad Azarmi, Ying Huang, Rebekah Wilson

Journal of Thermal Spray Technology· Volume 35· Issue 2-3

Abstract

Abstract Recently, special types of high-temperature and corrosion-resistant nickel chromium coatings have been designed and applied on industrial equipment and tools. In addition to NiCr, a large number of alloying elements in small amounts are added to the coating composition. In this study, the high-velocity oxygen fuel (HVOF) technology has been utilized to deposit NiCrSiBMoFeCuC as an example of coating with complex composition. The microstructural characterization was carried out on the coating sample using optical microscopy (OM), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and x-ray diffraction (XRD). The coating microstructure exhibited low porosity content approximately 3%, which is in the acceptable range for an anti-corrosion protective coating. The coating exhibited strong adhesion to the substrate, with no evidence of delamination, indicating good interfacial bonding. Notably, a high density of dislocations within the grain core was observed in TEM micrographs. The x-ray diffraction (XRD) analysis of the powder identified the major peaks as expected, but the coating sample showed formation of some extra phases during HVOF process that may alter thermo-mechanical properties of the coating. The need for this study can be justified due to the unique composition of the coating that makes it suitable to be used as protective layer for corrosion protection in harsh environment for industrial parts and components. While the added boron content is expected to enhance the hardness of the coating, silicon may improve the wear resistance of the NiCr coating.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. S.G. Sapate, N. Tangselwar, S.N. Paul, R.C. Rathod, S. Mehar, D.S. Gowtam, and M. Roy, Effect of Coating Thickness on the Slurry Erosion Resistance of HVOF-Sprayed WC-10Co-4Cr Coatings, J. Therm. Spray Tech., 2021, 30, p 1365–1379. https://doi.org/10.1007/s11666-021-01190-210.1007/s11666-021-01190-2 ↗
2. J. Kawakita, T. Fukushima, S. Kuroda, and T. Kodama, Corrosion Behaviour of HVOF Sprayed SUS316L Stainless Steel in Seawater, Corros. Sci., 2002, 44, p 2561–2581.10.1016/S0010-938X(02)00030-6 ↗
3. K.S. Tan, J.A. Wharton, and R.J.K. Wood, Solid Particle Erosion–Corrosion Behaviour of a Novel HVOF Nickel Aluminium Bronze Coating for Marine Applications—Correlation Between Mass Loss and Electrochemical Measurements, Wear, 2005, 258, p 629–640. https://doi.org/10.1016/j.wear.2004.02.01910.1016/j.wear.2004.02.019 ↗
4. M. Zhong, W. Liu, and H. Zhang, Corrosion and Wear Resistance Characteristics of NiCr Coating by Laser Alloying with Powder Feeding on Grey Iron Liner, Wear, 2006, 260, p 1349–1355. https://doi.org/10.1016/j.wear.2005.09.03310.1016/j.wear.2005.09.033 ↗
5. S. Shrestha, T. Hodgkiess, and A. Neville, Erosion–Corrosion Behaviour of High-Velocity Oxy-Fuel Ni-Cr-Mo-Si-B Coatings Under High-Velocity Seawater Jet Impingement, Wear, 2005, 259, p 208–218. https://doi.org/10.1016/j.wear.2005.01.03810.1016/j.wear.2005.01.038 ↗
6. S.A. Galedari, M.S. Jazi, F. Azarmi, and Y.C. Wang, High Temperature Corrosion and Electrochemical Behavior of HVOF Sprayed Inconel 718 Coating Using an Innovative Device: HTCMD, Mater. Corros., 2017, 68, p 731–739. https://doi.org/10.1002/maco.20160927610.1002/maco.201609276 ↗
7. Y. Kawahara, Development and Application of High-Temperature Corrosion-Resistant Materials and Coatings for Advanced Waste-to-Energy Plants, Mater. High Temp., 1997, 14, p 261–268. https://doi.org/10.1080/09603409.1997.1168955210.1080/09603409.1997.11689552 ↗
8. S.S. Chatha, H.S. Sidhu, and B.S. Sidhu, High Temperature Hot Corrosion Behaviour of NiCr and Cr 3C 2-NiCr Coatings on T91 Boiler Steel in an Aggressive Environment at 750°C, Surf. Coat. Technol., 2012, 206, p 3839–3850. https://doi.org/10.1016/j.surfcoat.2012.01.06010.1016/j.surfcoat.2012.01.060 ↗
9. A. Bansal, D.K. Goyal, P. Singh, A.K. Singla, M.K. Gupta, N. Bala, J. Kolte, and G. Setia, Erosive Wear Behaviour of HVOF-Sprayed Ni-20Cr2O3 Coating on Pipeline Materials, Int. J. Refract. Met. Hard Mater., 2020, 92, 105332. https://doi.org/10.1016/j.ijrmhm.2020.10533210.1016/j.ijrmhm.2020.105332 ↗
10. T.S. Sidhu, S. Prakash, and R.D. Agrawal, Hot Corrosion Performance of a NiCr Coated Ni-Based Alloy, Scr. Mater., 2006, 55, p 179–182. https://doi.org/10.1016/j.scriptamat.2006.03.05410.1016/j.scriptamat.2006.03.054 ↗
11. N. Bala, H. Singh, and S. Prakash, High-Temperature Oxidation Studies of Cold-Sprayed Ni-20Cr and Ni-50Cr Coatings on SAE 213–T22 Boiler Steel, Appl. Surf. Sci., 2009, 255, p 6862–6869. https://doi.org/10.1016/j.apsusc.2009.03.00610.1016/j.apsusc.2009.03.006 ↗
12. S. Hong, Y. Wu, G. Li, B. Wang, W. Gao, and G. Ying, Microstructural Characteristics of High-Velocity Oxygen-Fuel (HVOF) Sprayed Nickel-Based Alloy Coating, J. Alloys Compd., 2013, 581, p 398–403. https://doi.org/10.1016/j.jallcom.2013.07.10910.1016/j.jallcom.2013.07.109 ↗
13. H.S. Sidhu, B.S. Sidhu, and S. Prakash, Comparative Characteristic and Erosion Behavior of NiCr Coatings Deposited by Various High-Velocity Oxyfuel Spray Processes, J. Mater. Eng. Perform., 2006, 15, p 699–704. https://doi.org/10.1361/105994906X15071310.1361/105994906X150713 ↗
14. N.F. Ak, C. Tekmen, I. Ozdemir, H.S. Soykan, and E. Celik, NiCr Coatings on Stainless Steel by HVOF Technique, Surf. Coat. Technol., 2003, 173, p 1070–1073. https://doi.org/10.1016/S0257-8972(03)00367-010.1016/S0257-8972(03)00367-0 ↗
15. V. Higuera, F.J. Belzunce, A. Carriles, and S. Poveda, Influence of the Thermal-Spray Procedure on the Properties of a Nickel-Chromium Coating, Surf. Coat. Technol., 2002, 162, p 6–10.
16. S. Kamal, R. Jayaganthan, and S. Prakash, High Temperature Oxidation Studies of Detonation-Gun-Sprayed Cr3C2-NiCr Coating on Fe- and Ni-Based Superalloys in Air Under Cyclic Condition at 900 °C, J. Alloys Compd., 2008, 472, p 378–389. https://doi.org/10.1016/j.jallcom.2008.04.08710.1016/j.jallcom.2008.04.087 ↗
17. M. Oksa, P. Auerkari, J. Salonen, and T. Varis, Nickel-Based HVOF Coatings Promoting High Temperature Corrosion Resistance of Biomass-Fired Power Plant Boilers, Fuel Process. Technol., 2014, 125, p 236–245. https://doi.org/10.1016/j.fuproc.2014.04.00610.1016/j.fuproc.2014.04.006 ↗
18. J. Saaedi, T.W. Coyle, S. Mirdamadi, H. Arabi, and J. Mostaghimi, Phase Formation in a Ni-50Cr HVOF Coating, Surf. Coat. Technol., 2008, 202, p 5804–5811. https://doi.org/10.1016/j.surfcoat.2008.05.05610.1016/j.surfcoat.2008.05.056 ↗
19. I. Hemmati, V. Ocelík, and J.T.M. De Hosson, Effects of the Alloy Composition on Phase Constitution and Properties of Laser Deposited Ni-Cr-B-Si Coatings, Phys. Procedia, 2013, 41, p 302–311. https://doi.org/10.1016/j.phpro.2013.03.08210.1016/j.phpro.2013.03.082 ↗
20. I. Hemmati, V. Ocelík, and J.T.M. De Hosson, Toughening Mechanism for Ni-Cr-B-Si-C Laser Deposited Coatings, Mater. Sci. Eng. A, 2013, 582, p 305–315. https://doi.org/10.1016/j.msea.2013.06.01010.1016/j.msea.2013.06.010 ↗
21. I. Hemmati, V. Ocelík, and J.T.M. De Hosson, Evolution of Microstructure and Properties in Laser Cladding of a Ni-Cr-B-Si Hardfacing Alloy, WIT Trans. Eng. Sci., 2011, 71, p 287–296. https://doi.org/10.2495/SECM11025110.2495/SECM110251 ↗
22. S. Hayashi, D. Kudo, R. Nagashima, and H. Utsumi, Effect of Cu on Oxidation Behaviour of FCC Fe-Ni-Cr-Al and Ni-Cr-Al Based Alloys, Corros. Sci., 2020 https://doi.org/10.1016/j.corsci.2019.10827310.1016/j.corsci.2019.108273 ↗
23. I. Hemmati, J.C. Rao, V. Ocelík, and J.T.M. De Hosson, Phase Formation and Properties of Vanadium-Modified Ni-Cr-B-Si-C Laser-Deposited Coatings, J. Mater. Sci., 2013, 48, p 3315–3326. https://doi.org/10.1007/s10853-012-7117-410.1007/s10853-012-7117-4 ↗
24. A.L. Robertson and K.W. White, Microscale Fracture Mechanisms of a Cr3C2-NiCr HVOF Coating, Mater. Sci. Eng. A, 2017, 688, p 62–69. https://doi.org/10.1016/j.msea.2017.01.09710.1016/j.msea.2017.01.097 ↗
25. C. Sudha, P. Shankar, R.V.S. Rao, R. Thirumurugesan, M. Vijayalakshmi, and B. Raj, Microchemical and Microstructural Studies in a PTA Weld Overlay of Ni-Cr-Si-B Alloy on AISI 304L Stainless Steel, Surf. Coat. Technol., 2008, 202, p 2103–2112. https://doi.org/10.1016/j.surfcoat.2007.08.06310.1016/j.surfcoat.2007.08.063 ↗
26. F. Azarmi and I. Sevostianov, Comparative Micromechanical Analysis of Alloy 625 Coatings deposited by Air Plasma Spraying, Wire Arc Spraying, and Cold Spraying Technologies, Mech. Mater., 2020, 144, 103345. https://doi.org/10.1016/j.mechmat.2020.10334510.1016/j.mechmat.2020.103345 ↗
27. M. Somervuori, T. Varis, M. Oksa, T. Suhonen, and P. Vuoristo, Comparative Study on the Corrosion Performance of APS-, HVOF-, and HVAF-Sprayed NiCr and NiCrBSi Coatings in NaCl Solutions, J. Therm. Spray Tech., 2022, 31, p 1581–1597. https://doi.org/10.1007/s11666-022-01389-x10.1007/s11666-022-01389-x ↗
28. M. Oksa and J. Metsäjoki, Optimizing NiCr and FeCr HVOF Coating Structures for High Temperature Corrosion Protection Applications, J. Therm. Spray Technol., 2015, 24, p 436–453. https://doi.org/10.1007/s11666-014-0192-010.1007/s11666-014-0192-0 ↗
29. T. Varis, A. Mäkelä, T. Suhonen, J. Laurila, and P. Vuoristo, Integrity of APS, HVOF and HVAF Sprayed NiCr and NiCrBSi Coatings Based on the Tensile Stress–Strain Response, Surf. Coat. Technol., 2023, 452, 129068. https://doi.org/10.1016/j.surfcoat.2022.12906810.1016/j.surfcoat.2022.129068 ↗
30. F. Azarmi and C.P. Leither, Microstructural Formation During Wire arc Spraying of Alloy 625 on Wrought Alloy 625 Substrate, Metall. Mater. Trans., 2012, 43, p 4703–4710. https://doi.org/10.1007/s11661-012-1256-810.1007/s11661-012-1256-8 ↗
31. W.T. Hsiao, C.Y. Su, T.S. Huang, and W.H. Liao, The Microstructural Characteristics and Mechanical Properties of Ni-Al/h-BN Coatings Deposited Using Plasma Spraying, J. Alloys Compd., 2011, 509, p 8239–8824. https://doi.org/10.1016/j.jallcom.2011.05.09510.1016/j.jallcom.2011.05.095 ↗
32. D. Zhang, S.J. Harris, and D.G. Mccartney, Microstructure Formation and Corrosion Behaviour in HVOF-Sprayed Inconel 625 Coatings, Mater. Sci. Eng., 2003, 344, p 45–56.10.1016/S0921-5093(02)00420-3 ↗
33. L. Liu, Y. Li, and F. Wang, Influence of Grain Size on the Corrosion Behavior of a Ni-Based Superalloy Nanocrystalline Coating in NaCl Acidic Solution, Electrochim. Acta, 2008, 53, p 2453–2462. https://doi.org/10.1016/j.electacta.2007.10.04810.1016/j.electacta.2007.10.048 ↗
34. Y. Gao, X. Li, Y. Ma, M. Kitchen, Y. Ding, and Q. Luo, Formation Mechanism and Wear Behavior of Gradient Nanostructured Inconel 625 Alloy, Trans. Nonferrous Met. Soc. China, 2022, 32, p 1910–1925. https://doi.org/10.1016/S1003-6326(22)65918-110.1016/S1003-6326(22)65918-1 ↗
35. J.H. Liu, J.X. Yan, Z.L. Pei, J. Gong, and C. Sun, Effects of Mo Content on the Grain Size, Hardness and Anti–Wear Performance of Electrodeposited Nanocrystalline and Amorphous Ni–Mo Alloys, Surf. Coat. Technol., 2020 https://doi.org/10.1016/j.surfcoat.2020.12647610.1016/j.surfcoat.2020.126476 ↗
36. D. Alontseva and E. Ghassemieh, The Structure-Phase Compositions of Powder Ni-Based Coatings after Modification by DC Plasma Jet Irradiation, J. Phys., 2015, 644, p 012009. https://doi.org/10.1088/1742-6596/644/1/01200910.1088/1742-6596/644/1/012009 ↗
37. T. Grabowski, I. Ara, J. Thorpe, and F. Azarmi, Investigation of Microstructural Characteristics of Cobalt Chromium Molybdenum Additively Manufactured Using Laser Directed Energy Deposition Technology, Metall. Mater. Trans., 2023, 54, p 4065–4079. https://doi.org/10.1007/s11661-023-07154-110.1007/s11661-023-07154-1 ↗
38. C. Author, N.N. Erdoğan, and A.B. Başyiğit, An Approach on Determining Micro-strain and Crystallite Size Values of Thermal Spray Barrier Coated Inconel 601 Super Alloy, Int. J. Mater. Eng. Technol., 2023, 6, p 21–25.
39. D. Alontseva, A. Krasavin, A. Russakova, T. Kolesnikova, and G. Bektasova, Effect of Irradiation with DC Plasma Jet on the Structure Phase Compositions and Properties of Powder Ni and Co-Based Coatings, Medziagotyra, 2016, 22, p 238–242. https://doi.org/10.5755/j01.ms.22.2.769910.5755/j01.ms.22.2.7699 ↗
40. N. Makuch, The Importance of Phase Composition for Corrosion Resistance of Borided Layers Produced on Nickel Alloys, Materials, 2020, 13, p 1–16. https://doi.org/10.3390/ma1322513110.3390/ma13225131 ↗
41. Y. Ohishi, M. Sugizaki, Y. Sun, H. Muta, and K. Kurosaki, Thermophysical and Mechanical Properties of CrB and FeB, J. Nucl. Sci. Technol., 2019, 56, p 859–865. https://doi.org/10.1080/00223131.2019.159389310.1080/00223131.2019.1593893 ↗
42. T. Yu, J. Chen, Y. Wen, and Q. Deng, High temperature phase stability and wear behavior of laser clad Ta reinforced NiCrBSi coating, Appl. Surf. Sci., 2021, 547, 149171. https://doi.org/10.1016/j.apsusc.2021.14917110.1016/j.apsusc.2021.149171 ↗
43. T. Boonthai, P. Nunthavarawong, P. Sheppard, H. Koiprasert, N. Phupradit, and P. Kerdwattha, Effect of Nano-fly Ash Additive on the Mechanical and Microstructural Properties of Plasma-Sprayed Mullite Coatings, J. Therm. Spray Technol., 2024, 33, p 2578–2592. https://doi.org/10.1007/s11666-024-01817-010.1007/s11666-024-01817-0 ↗
44. G. Bolelli, L. Lusvarghi, and R. Giovanardi, A Comparison Between the Corrosion Resistances of Some HVOF-Sprayed Metal Alloy Coatings, Surf. Coat. Technol., 2008, 202, p 4793–4809. https://doi.org/10.1016/j.surfcoat.2008.04.05610.1016/j.surfcoat.2008.04.056 ↗
45. X. Ke, M. Zhang, K. Zhao, and D. Su, Moiré Fringe Method Via Scanning Transmission Electron Microscopy, Small Methods, 2022 https://doi.org/10.1002/smtd.20210104010.1002/smtd.202101040 ↗