journal article·2025-03Open access

Effect of Laser Texturing in Thermal Spraying on the Fatigue Life of the Ti-6Al-4V Alloy

Eléonore Pegane-Vingadas, Michel Chaussumier, Adriana Soveja, Sophie Costil

Journal of Thermal Spray Technology· Volume 34· Issue 2-3

Abstract

Abstract The Ti-6Al-4V alloy is widely used in aerospace applications for its excellent mechanical properties; however, it presents low wear resistance. It is often coated with a cermet using high-velocity oxygen fuel (HVOF) spraying to improve its wear performance. The Cr3C2-NiCr cermet becomes particularly interesting since it is non-carcinogenic, compared to traditional cermet coatings containing tungsten-cobalt compounds. While the improvement in wear resistance of Ti-6Al-4V with this coating has been demonstrated, its impact on the fatigue performance of the alloy remains to be studied. This is precisely the aim of this study, which focuses on the fatigue life of a Cr3C2-25NiCr-coated Ti-6Al-4V alloy. Among the various influencing factors, surface preparation represents a significant source of crack initiation, particularly in the case of sandblasted surfaces. Indeed, the inclusion of fragmented alumina particles can produce stress concentration zones. Thus, laser texturing, which is a method involving the creation of anchoring points through controlled ablation, can be considered today as a less harmful surface preparation technique. The results obtained from cyclic tensile fatigue tests with a stress ratio of 0.1 for these two surface preparation methods, both with and without the coating, are presented in this paper.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. B.D. Sartwell, K.O. Legg, J. Schell, J. Sauer, P. Natishan, D. Dull, J. Falkowski, P. Bretz, J. Deveraux, C. Edwards and D. Parker, Validation of HVOF WC/Co Thermal Spray Coatings as a Replacement for Hard Chrome Plating on Aircraft Landing Gear, Nav. Res. Lab., 2003, p 1-8, (in English)
2. K.R.R.M. Reddy, M.M.M. Sarcar and N. Ramanaiah, Tribological Behavior of WC-Co/NiCrAlY Coatings on Ti-6Al-4V, Int. J. Ad. Sc. Technol., 2013, 57, p 37–44. (in English)
3. R.C. Souza, M.P. Nascimento, H.J.C. Voorwald and W.L. Pigatin, The Effect of WC-17Co Thermal Spray Coating by HVOF and Hard Chromium Electroplating on the Fatigue Life and Abrasive Wear Resistance of AISI 4340 High Strength Steel, Corros. Rev., 2003, 21(1), p 75–96. (in English)10.1515/CORRREV.2003.21.1.75 ↗
4. T. Gong, P. Yao, X. Zuo, Z. Zhang, Y. Xiao, L. Zhao, H. Zhou, M. Deng, Q. Wang and A. Zhong, Influence of WC Carbide Particle Size on the Microstructure and Abrasive Wear Behavior of WC–10Co–4Cr Coatings for Aircraft Landing Gear, Wear, 2016, 362–363, p 135–145. (in English)10.1016/j.wear.2016.05.022 ↗
5. International Agency for Research on Cancer, Cobalt in Hard Metals and Cobalt Sulfate, Gallium Arsenide, Indium Phosphide and Vanadium Pentoxide World Health Organization International Agency for Research, IARC Monogr. Eval. Carcinog. Risks Humans, 2006, 86, p 67–73. (in English)
6. L. Andersson, A. Hedbrant, I. Bryngelsson, A. Persson, A. Johansson, A. Ericsson, P. Vihlborg, B. Sjögren, E. Särndahl, L. Stockfelt and H. Westberg, Respiratory Health and Inflammatory Markers—Exposure to Cobalt in the Swedish Hard Metal Industry, J. Occup. Environ. Med., 2020, 62(10), p 820–829. (in English)10.1097/JOM.0000000000001952 ↗
7. T. Varis, T. Suhonen, O. Calonius, J. Čuban and M. Pietola, Optimization of HVOF Cr3C2-NiCr Coating for Increased Fatigue Performance, Surf. Coat. Technol., 2016, 305, p 123–131. (in English)10.1016/j.surfcoat.2016.08.012 ↗
8. G.M. Smith, E.J. Gildersleeve, X.-T. Luo, V. Luzin and S. Sampath, On the Surface and System Performance of Thermally Sprayed Carbide Coatings Produced Under Controlled Residual Stresses, Surf. Coat. Technol., 2020, 387, p 125536. (in English)10.1016/j.surfcoat.2020.125536 ↗
9. G. Ham, R. Kreethi, H. Kim, S. Yoon and K. Lee, Effect of Different HVOF Thermal Sprayed Cermet Coatings on Tensil and Fatigue Properties of AISI 1045 Steel, J. Mater. Res. Technol., 2021, 15, p 6647–66558. (in English)10.1016/j.jmrt.2021.11.102 ↗
10. D. Kunying, G. Yafei, C. Taoto and Z. Hui, Effect of Feedstock Size on the Properties of WC-17Co Coatings, Rare Met. Mater. Eng., 2017, 46(5), p 1197–1201. (in English)10.1016/S1875-5372(17)30136-4 ↗
11. R. Saharkhiz, Z. Valefi, M. Mirjani and A. Mirak, Comprehensive Study on the Effect of HVOF Processing Parameters and Particle Size on High-Temperature Properties of NiCoCrAlYTa Coatings, Surf. Coat. Technol., 2023, 473, p 129951. (in English)10.1016/j.surfcoat.2023.129951 ↗
12. I. Baumann, L. Hagen, W. Tillman, P. Hollingsworth, D. Stangier, G. Schmidtmann, M. Tolan, M. Paulus and C. Sternemann, Process Characteristics, Particle Behavior and Coating Properties During HVOF Spraying of Conventional, Fine and Nanostructured WC-12Co Powders, Surf. Coat. Technol., 2021, 405, p 126716. (in English)10.1016/j.surfcoat.2020.126716 ↗
13. T. Ogawa, K. Tokaji, T. Ejima, Y. Kobayashi and Y. Harada, Evaluation of Fatigue Strengths of WC Cermet and 13Cr Steel-Sprayed Materials, Mater. Sci. Res. Int., 1998, 4(1), p 12–18. (in English)
14. M.Y.P. Costa, M.L.R. Venditti, H.J.C. Voorwald, M.O.H. Cioffi and T.G. Cruz, Effect of WC–10%Co–4%Cr Coating on the Ti–6Al–4V Alloy Fatigue Strength, J. Mater. Sci. Eng. A, 2009, 507(1–2), p 29–36. (in English)10.1016/j.msea.2008.11.068 ↗
15. M. Lieblich, S. Barriuso, J. Ibanez, L. Ruiz-de-Lara, M. Diaz, J.L. Ocana, A. Alberdi and J.L. Gonzalez-Carrasco, On the Fatigue Behavior of Medical Ti6Al4V Roughened by Grit Blasting and Abrasiveless Waterjet Peening, J. Mech. Behav. Biomed. Mater., 2016, 63, p 390–398. (in English)10.1016/j.jmbbm.2016.07.011 ↗
16. C. Leinenbach and D. Eifler, Fatigue and Cyclic Deformation Behaviour of Surface-Modified Titanium Alloys in Simulated Physiological Media, Biomaterials, 2006, 27(8), p 1200–1208. (in English)10.1016/j.biomaterials.2005.08.012 ↗
17. M. Multigner, E. Frutos, C.L. Mera, J. Chao and J.L. González-Carrasco, Interrogations on the Sub-Surface Strain Hardening of Grit Blasted Ti-6Al-4V Alloy, Surf. Coat. Technol., 2009, 203(14), p 2036–2040. (in English)10.1016/j.surfcoat.2009.02.003 ↗
18. X.P. Jiang, X.Y. Wang, J.X. Li, D.Y. Li, C.-S. Man, M.J. Shepard and T. Zhai, Enhancement of FATIGUE and Corrosion Properties of Pure Ti by Sandblasting, J. Mater. Sci. Eng. A, 2006, 429(1–2), p 30–35. (in English)10.1016/j.msea.2006.04.024 ↗
19. S. Barriuso, J. Chao, J.A. Jiménez, S. Garcia and J.L. Gonzalez-Carrasco, Fatigue Behavior of Ti6Al4V and 316 LVM Blasted with Ceramic Particles of Interest for Medical Devices, J. Mech. Behav. Biomed. Mater., 2014, 30, p 30–40. (in English)10.1016/j.jmbbm.2013.10.013 ↗
20. M. Baleani, M. Viceconti and A. Toni, The Effect of Sandblasting Treatment on Endurance Properties of Titanium, Artif. Organs, 2000, 24(4), p 296–299. (in English)10.1046/j.1525-1594.2000.06486.x ↗
21. A. Lamraoui, Traitement de Surface par Texturation Laser: une Alternative “propre” de Préparation de Surface pour la Projection Thermique. (Surface Treatment by Laser Texturing: A ‘Clean’ Alternative for Surface Preparation in Thermal Spraying), University technology of Belfort Montbéliard, 2011, p 69-107 (in French)
22. L. Convert, E. Bourillot, M. Fraçois, N. Pocholle, F. Baras, O. Politano and S. Costil, Laser Textured Titanium Surface Characterization, Appl. Surf. Sci., 2022, 586, p 152807. (in English)10.1016/j.apsusc.2022.152807 ↗
23. S.S. Aulakh and G. Kaushal, Laser Texturing as an Alternative to Grit Blasting for Improved Coating Adhesion on AZ91D Magnesium Alloy, Trans. IMF, 2019, 97(2), p 100–108. (in English)10.1080/00202967.2019.1578562 ↗
24. R. Kromer, S. Costil, J. Cormier, L. Berthe, P. Peyre and D. Courapied, Laser Patterning Pretreatment Before Thermal Spraying: a Technique to Adapt and Control the Surface Topography to Thermomechanical Loading and Materials, J. Therm. Spray Technol., 2016, 25(3), p 401–410. (in English)10.1007/s11666-015-0352-x ↗
25. R. Kromer, J. Cormier and S. Costil, Role of Powder Granolumetry and Substrate Topography in Adhesion Strength of Thermal Spray Coating, J. Therm. Spray Technol., 2016, 25(5), p 933–945. (in English)10.1007/s11666-016-0411-y ↗
26. V.U. Bagade, M. Duraiselvama, N. Sarangi and K. Parthiban, Effect of Laser Surface Texturing on Coating Adherence And Tribological Properties of CuNiIn and MoS2 Coating, Trans. Indian Inst. Met., 2022, 75, p 239–250. (in English)10.1007/s12666-021-02417-0 ↗
27. L. Despres, Comportement en fatigue Thermomécanique à haute Température d’un Système Barrière Thermique Texturé par Laser (High-Temperature Thermomechanical Fatigue Behavior of a Laser-Textured Thermal Barrier Coating System), University of Bourgogne Franch-Comte, Belfort, 2020, p 55-91, (in French)
28. W. Lin-ting, Z. Xin-yi, Z. Li-na, K. Jia-jie, F. Zhi-qiang, S. Ding-shun and L. Run-jie, The Influence of Laser Surface Texture Parameters on the Hydrophobic Properties of Fe-Based Amorphous Coatings, J. Non-Cryst. Solids, 2022, 593, p 121771. (in English)10.1016/j.jnoncrysol.2022.121771 ↗
29. M.V. Zhidkov, N.A. Smirnov, J. Chen, S.I. Kudryashov and I.Y. Goncharov, Residual Stresses in Ti6Al4V Alloy after Surface Texturing by Femtosecond Laser Pulses, IOP Conf. Ser. Mater. Sci. Eng., 2020, 862(2), p 022060. (in English)10.1088/1757-899X/862/2/022060 ↗
30. Standard Specification for Titanium and Titanium Alloy Bar and Billets, ASTM B-348-09, J. ASTM Int., 2010, p 3-4, (in English)
31. G. Lutjering, J.C. Williams, Titanium, 2, Springer, 2003, p 203-250, (in English)
32. M. Peters, C. Leyens, Titanium and Titanium Alloys, Fundamentals and applications, 1, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, 2003, p 20 (in English)10.1002/3527602119.ch1 ↗
33. Y. Combres, B. Champin, Traitements thermiques des alliages de titane (Heat Treatments of Titanium Alloys), Tech. Ing., Metall., 1995, M1335 V2, p 7 (in French)10.51257/a-v2-m1335 ↗
34. P. Castany, F. Pettinari-Sturmel, J. Crestou, J. Douin and A. Coujou, Experimental Study of Dislocation Mobility in a Ti-6Al-4V Alloy, Acta Mater., 2007, 55(18), p 6284–6291. (in English)10.1016/j.actamat.2007.07.032 ↗
35. T. Sahraoui, N.-E. Fenineche, G. Montavon and C. Coddet, Alternative to Chromium: Characteristics and Wear Behavior of HVOF Coatings for Gas Turbine Shafts Repair (Heavy-Duty), J. Mater. Process. Technol., 2004, 152(1), p 43–55. (in English)10.1016/j.jmatprotec.2004.02.061 ↗
36. Matériaux métalliques—Essais de fatigue—Méthode par force axiale contrôlée (Metallic Materials - Fatigue Testing—Method for Axial Force Control), NF ISO 1099, AFNOR, 2021, (in French)
37. B. Malek, C. Mabru and M. Chaussumier, Fatigue Behavior of 2618–T851 Aluminum Alloy Under Uniaxial and Multiaxial Loadings, Int. J. Fatigue, 2020, 131, p 105322. (in English)10.1016/j.ijfatigue.2019.105322 ↗
38. M. Chaussumier, C. Mabru, M. Shahzad, R. Chieragatti and F. Rezai-Aria, A Predictive Fatigue Life Model for Anodized 7050 Aluminium Alloy, Int. J. Fatigue, 2013, 48, p 205–213. (in English)10.1016/j.ijfatigue.2012.11.002 ↗
39. ASTM E2109-01, Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings, E2109-01, J. ASTM Int., 2014, (in French)
40. Projection Thermique—Mesure de l’adhérence par essais de Traction (Thermal spraying—Measurement of Adhesion by Tensile testing), ISO14916, Int. Org. Standard., 2017, p 1-28 (in French)
41. American Society for Testing and Materials (ASTM), Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings. C 633—01, J. ASTM Int., 2009, p 5 (in English)
42. R.T.R. McGrann, D.J. Greving, J.R. Shadley, E.F. Rybicki, T.L. Kruecke and B.E. Bodge, The Effect of Coating Residual Stress on the Fatigue Life of Thermal Spray Coated Steel and Aluminium, Surf. Coat. Technol., 1998, 108–109, p 59–64. (in English)10.1016/S0257-8972(98)00665-3 ↗