journal article·2025-04Open access

Development of Gallium Nitride Coating via Aerosol Deposition

Shaoyun Zhou, Andreas Elsenberg, Chunjie Huang, Camilla Schulze, Frank Gaertner, Kazuhiro Ogawa, Thomas Klassen

Abstract

Abstract This study primarily demonstrates the feasibility of using aerosol deposition to produce thin GaN coatings through systematic investigation. To date, the roles of particle size and powder morphology in the consolidation of ceramic particles during aerosol deposition remain unclear. To enhance understanding of this process, two GaN powders, one coarse agglomerated and the other a fine monolithic powder, were deposited under various process conditions. The findings revealed that fine GaN powder is more effective in forming denser coating layers as compared to agglomerated GaN powder. Furthermore, the use of helium gas at higher pressures was observed to enhance coating formation in comparison with nitrogen gas. This study not only validates the potential of aerosol deposition for forming thin GaN coatings but also contributes to our understanding of the critical role that particle sizes play in the aerosol deposition process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · ZnO doping and properties · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. J. Akedo and M. Lebedev, Piezoelectric Properties and Poling Effect of Pb(Zr, Ti)O3 Thick Films Prepared for Microactuators by Aerosol Deposition, Appl. Phys. Lett., 2000, 77, p 1710–1712. https://doi.org/10.1063/1.130902910.1063/1.1309029 ↗
2. D. Popovici, H. Nagai, S. Fujishima and J. Akedo, Preparation of Lithium Aluminum Titanium Phosphate Electrolytes Thick Films by Aerosol Deposition Method, J. Am. Ceram. Soc., 2011, 94, p 3847–3850. https://doi.org/10.1111/j.1551-2916.2011.04551.x10.1111/j.1551-2916.2011.04551.x ↗
3. J. Akedo, Room Temperature Impact Consolidation (RTIC) of Fine Ceramic Powder by Aerosol Deposition Method and Applications to Microdevices, J. Therm. Spray Technol., 2008, 17, p 181–198. https://doi.org/10.1007/S11666-008-9163-7/figures/2310.1007/S11666-008-9163-7/figures/23 ↗
4. J. Ryu, D. Park, B. Hahn, J. Choi, W. Yoon, K. Kim and H. Yun, Photocatalytic TiO2 Thin Films by Aerosol-Deposition: From Micron-Sized Particles to Nano-Grained Thin Film at Room Temperature, Appl. Catal. B, 2008, 83, p 1–7. https://doi.org/10.1016/j.apcatb.2008.01.02010.1016/j.apcatb.2008.01.020 ↗
5. T. Schmidt, H. Assadi, F. Gärtner, H. Richter, T. Stoltenhoff, H. Kreye and T. Klassen, From Particle Acceleration to Impact and Bonding in Cold Spraying, J. Therm. Spray Technol., 2009, 18, p 794–808. https://doi.org/10.1007/S11666-009-9357-7/figures/2210.1007/S11666-009-9357-7/figures/22 ↗
6. H. Park, H. Kwon, T. Lee and C. Lee, Deposition Mechanism in Vacuum-Kinetic-Sprayed Alumina Film: First Weak Bonding and Bonding Consolidation, Ceram. Int., 2024, 50, p 15577–15590. https://doi.org/10.1016/j.ceramint.2024.02.03710.1016/j.ceramint.2024.02.037 ↗
7. B. Daneshian, F. Gärtner, H. Assadi, M. Villa Vidaller, D. Höche and T. Klassen, Features of Ceramic Nanoparticle Deformation in Aerosol Deposition Explored by Molecular Dynamics Simulation, Surf. Coat. Technol., 2022, 429, p 127886. https://doi.org/10.1016/j.surfcoat.2021.12788610.1016/j.surfcoat.2021.127886 ↗
8. J. Ryu, B. Hahn, J. Choi, W. Yoon, B. Lee, J. Choi and D. Park, Porous Photocatalytic TiO2 Thin Films by Aerosol Deposition, J. Am. Ceram. Soc., 2010, 93, p 55–58. https://doi.org/10.1111/j.1551-2916.2009.03391.x10.1111/j.1551-2916.2009.03391.x ↗
9. A. Bruera, A. Elsenberg, M. Borghi, G. Dolcetti, G. Bolelli, F. Gärtner, M. Schieda, T. Klassen and L. Lusvarghi, Aerosol Deposition of CuFeO2 Photocathode Coatings for Hydrogen Production, J. Therm. Spray Technol., 2024 https://doi.org/10.1007/s11666-024-01798-010.1007/s11666-024-01798-0 ↗
10. H. Lin, Y. Liu, W. Liang, Q. Miao, S. Zhou, J. Sun, Y. Qi, X. Gao, Y. Song and K. Ogawa, Effect of the Y2O3 Amount on the Oxidation Behavior of ZrB2-SiC-Based Coatings for Carbon/Carbon Composites, J. Eur. Ceram. Soc., 2022, 42, p 4770–4782. https://doi.org/10.1016/j.jeurceramsoc.2022.05.00610.1016/j.jeurceramsoc.2022.05.006 ↗
11. H. Lin, W. Liang, Q. Miao, Y. Qi, S. Zhou, F. Jia, H. Lan and S. Xu, Investigation of the Microstructure and Oxidation Behavior of Monolayer and Bilayer ZrB2-SiC-Y2O3/SiC Coatings on C/C Composites, Surf. Coat. Technol., 2024, 487, p 131007. https://doi.org/10.1016/j.surfcoat.2024.13100710.1016/j.surfcoat.2024.131007 ↗
12. H. Lin, W. Liang, Y. Jia, Q. Miao, R. Hu, Z. Ding and L. Yu, Effect of AlY Gradient Coating on Hot Corrosion Resistance of γ-TiAl Alloy at Different Temperatures, Appl. Surf. Sci., 2019, 487, p 868–875. https://doi.org/10.1016/j.apsusc.2019.05.16810.1016/j.apsusc.2019.05.168 ↗
13. Z. Mao, T. Iizuka and S. Maeda, Bidirectional Electrohydrodynamic Pump with High Symmetrical Performance and its Application to a Tube Actuator, Sens. Actuators, A, 2021, 332, p 113168. https://doi.org/10.1016/j.sna.2021.11316810.1016/j.sna.2021.113168 ↗
14. A. Elsenberg, F. Gärtner and T. Klassen, Aerosol Deposition of Ti3SiC2-MAX-Phase Coatings, J. Therm. Spray Technol., 2021, 30, p 1121–1135. https://doi.org/10.1007/s11666-021-01194-y10.1007/s11666-021-01194-y ↗
15. A. Elsenberg, T. Emmler, M. Schieda, F. Gärtner and T. Klassen, Tuning Aerosol Deposition of BiVO4 Films for Effective Sunlight Harvesting, J. Therm. Spray Technol., 2023, 32, p 352–362. https://doi.org/10.1007/s11666-023-01550-010.1007/s11666-023-01550-0 ↗
16. C. Wolpert, T. Emmler, M. Villa Vidaller, A. Elsenberg, K. Shinoda, M. Schieda, F. Gärtner, J. Akedo and T. Klassen, Aerosol-Deposited BiVO4 Photoelectrodes for Hydrogen Generation, J. Therm. Spray Technol., 2021, 30, p 603–616. https://doi.org/10.1007/s11666-020-01104-810.1007/s11666-020-01104-8 ↗
17. C. Huang, A. List, L. Wiehler, M. Schulze, F. Gärtner and T. Klassen, Cold Spray Deposition of Graded Al-SiC Composites, Addit. Manuf., 2022, 59, p 103116. https://doi.org/10.1016/j.addma.2022.10311610.1016/j.addma.2022.103116 ↗
18. S. Yin, N. Fan, C. Huang, Y. Xie, C. Zhang, R. Lupoi and W. Li, Towards High-Strength Cold Spray Additive Manufactured Metals: Methods, Mechanisms, and Properties, J. Therm. Spray Technol., 2024, 170, p 47–64. https://doi.org/10.1016/j.jmst.2023.05.04710.1016/j.jmst.2023.05.047 ↗
19. H. Assadi, H. Kreye, F. Gärtner and T. Klassen, Cold Spraying—A Materials Perspective, Acta Mater., 2016, 116, p 382–407. https://doi.org/10.1016/j.actamat.2016.06.03410.1016/j.actamat.2016.06.034 ↗
20. N. Fan, C. Huang, Z. Wang, P. Yu, W. Chen, R. Lupoi, Q. Xie, L. Liu and S. Yin, Interparticle Bonding and Interfacial Nanocrystallization Mechanisms in additively Manufactured Bulk Metallic Glass Fabricated by Cold Spray, Addit. Manuf., 2022, 58, p 103057. https://doi.org/10.1016/j.addma.2022.10305710.1016/j.addma.2022.103057 ↗
21. J. Akedo and M. Lebedev, Influence of Carrier Gas Conditions on Electrical and Optical Properties of Pb(Zr, Ti)O3 Thin Films Prepared by Aerosol Deposition Method, Jpn. J. Appl. Phys., 2001, 40, p 5528–5532. https://doi.org/10.1143/JJAP.40.5528/XML10.1143/JJAP.40.5528/XML ↗
22. J. Sun, K. Yamanaka, S. Zhou, H. Saito, Y. Ichikawa, K. Ogawa and A. Chiba, Adhesion Mechanism of Cold-Sprayed Sn Coatings on Carbon Fiber Reinforced Plastics, Appl. Surf. Sci., 2022, 579, p 151873. https://doi.org/10.1016/j.apsusc.2021.15187310.1016/j.apsusc.2021.151873 ↗
23. J. Sun, K. Yamanaka, S. Zhou, H. Saito, Y. Ichikawa, K. Ogawa and A. Chiba, Dynamic Recrystallization of Sn coatings on Carbon-Fiber-Reinforced Plastics during cold Spray Additive Manufacturing, Addit. Manuf., 2022, 56, p 102949. https://doi.org/10.1016/j.addma.2022.10294910.1016/j.addma.2022.102949 ↗
24. C. Huang, A. List, J. Shen, B. Fu, S. Yin, T. Chen, B. Klusemann, F. Gärtner and T. Klassen, Tailoring Powder Strengths for Enhanced Quality of Cold Sprayed Al6061 Deposits, Mater. Des., 2022, 215, p 110494. https://doi.org/10.1016/j.matdes.2022.11049410.1016/j.matdes.2022.110494 ↗
25. K. Shinoda, F. Gaertner, C. Lee, A. Dolatabadi and S. Johnson, Kinetic Spraying of Brittle Materials: From Layer Formation to Applications in Aerosol Deposition and cold Gas Spraying, J. Therm. Spray Technol., 2021, 30, p 471–479. https://doi.org/10.1007/s11666-021-01177-z10.1007/s11666-021-01177-z ↗
26. M. Winnicki, A. Baszczuk, M. Jasiorski, B. Borak and A. Małachowska, Preliminary Studies of TiO2 Nanopowder Deposition onto Metallic Substrate by Low Pressure Cold Spraying, Surf. Coat. Technol., 2019, 371, p 194–202. https://doi.org/10.1016/j.surfcoat.2018.09.05710.1016/j.surfcoat.2018.09.057 ↗
27. A. Elsenberg, M. Busato, F. Gärtner, A. List, A. Bruera, G. Bolelli, L. Lusvarghi and T. Klassen, Influence of MAX-Phase Deformability on Coating Formation by cold Spraying, J. Therm. Spray Technol., 2021, 30(3), p 617–642. https://doi.org/10.1007/s11666-020-01110-w10.1007/s11666-020-01110-w ↗
28. A.M. Vilardell, N. Cinca, A. Concustell, S. Dosta, I.G. Cano and J.M. Guilemany, Cold Spray as an Emerging Technology for Biocompatible and Antibacterial Coatings: State of Art, J. Mater. Sci., 2015, 50, p 4441–4462. https://doi.org/10.1007/S10853-015-9013-1/TABLES/710.1007/S10853-015-9013-1/TABLES/7 ↗
29. N.T. Salim, M. Yamada, H. Nakano, K. Shima, H. Isago and M. Fukumoto, The effect of Post-Treatments on the Powder Morphology of Titanium Dioxide (TiO2) Powders Synthesized for Cold Spray, Surf. Coat. Technol., 2011, 206, p 366–371. https://doi.org/10.1016/j.surfcoat.2011.07.03010.1016/j.surfcoat.2011.07.030 ↗
30. M. Winnicki, L. Łatka, M. Jasiorski and A. Baszczuk, Mechanical Properties of TiO2 Coatings Deposited by Low Pressure Cold Spraying, Surf. Coat. Technol., 2021, 405, p 126516. https://doi.org/10.1016/j.surfcoat.2020.12651610.1016/j.surfcoat.2020.126516 ↗
31. T.A. Rahim, K. Takahashi, M. Yamada and M. Fukumoto, Effect of Powder Calcination on the Cold Spray Titanium Dioxide Coating, Mater. Trans., 2016, 57, p 1345–1350. https://doi.org/10.2320/MATERTRANS.T-M201681710.2320/MATERTRANS.T-M2016817 ↗
32. H. Kwon, Y. Kim, H. Park and C. Lee, Impact Behavior for Successful Particle-Particle Bonding in Vacuum Kinetic Spraying, J. Therm. Spray Technol., 2021, 30, p 542–557. https://doi.org/10.1007/S11666-020-01078-7/FIGURES/1410.1007/S11666-020-01078-7/FIGURES/14 ↗
33. J. Exner, T. Nazarenus, D. Hanft, J. Kita, R. Moos, J. Exner, T. Nazarenus, D. Hanft, J. Kita and R. Moos, What Happens during Thermal Post-Treatment of Powder Aerosol Deposited Functional Ceramic Films? Explanations Based Experiment-Enhanced Literature Survey, Adv. Mater., 2020, 32, p 1908104. https://doi.org/10.1002/ADMA.20190810410.1002/ADMA.201908104 ↗
34. D. Hanft, J. Exner and R. Moos, Thick-Films of Garnet-Type Lithium ion Conductor prepared by the Aerosol Deposition Method: the Role of Morphology and Annealing Treatment on the Ionic Conductivity, J. Power Sour., 2017, 361, p 61–69. https://doi.org/10.1016/J.JPOWSOUR.2017.06.06110.1016/J.JPOWSOUR.2017.06.061 ↗
35. B. Daneshian, F. Gaertner, H. Assadi, D. Hoeche, W. Weber and T. Klassen, Size Effects of Brittle Particles in Aerosol Deposition-Molecular Dynamics Simulation, J. Therm. Spray Technol., 2021, 30, p 503–522. https://doi.org/10.1007/s11666-020-01149-910.1007/s11666-020-01149-9 ↗
36. J. Akedo, Room Temperature Impact Consolidation (RTIC) of Fine Ceramic Powder by Aerosol Deposition Method and Applications to Microdevices, J. Therm. Spray Technol., 2009, 17, p 181–198. https://doi.org/10.1007/s11666-008-9163-710.1007/s11666-008-9163-7 ↗
37. Q. Wang, N. Ma, M. Takahashi, X. Luo and C. Li, Development of a Material Model for Predicting Extreme Deformation and Grain Refinement during Cold Spraying, Acta Mater., 2020, 199, p 326–339. https://doi.org/10.1016/J.ACTAMAT.2020.08.05210.1016/J.ACTAMAT.2020.08.052 ↗
38. C. Lee and J. Kim, Microstructure of Kinetic Spray Coatings: A Review, J. Therm. Spray Technol., 2015, 24, p 592–610. https://doi.org/10.1007/S11666-015-0223-5/METRICS10.1007/S11666-015-0223-5/METRICS ↗
39. Zhou, S., Bernard, C. A., Ravi, K., Ichikawa, Y., & Ogawa, K. (2019, May). Feasibility Study of GaN Coatings by Cold Spray Technique. In ITSC2019 (pp. 462-468). ASM International.10.31399/asm.cp.itsc2019p0462 ↗
40. S. Zhou, C.A. Bernard, K. Ravi, H. Saito, Y. Ichikawa, K. Ogawa and S. Yin, Development and Characterization of Photocatalytic GaN Coatings by Cold Spray Process, J. Therm. Spray Technol., 2021, 30, p 1294–1309. https://doi.org/10.1007/S11666-021-01207-W/FIGURES/1510.1007/S11666-021-01207-W/FIGURES/15 ↗
41. S. Zhou, J. Sun, C. Bernard, H. Lin, H. Saito, T. Miyazaki, Y. Ichikawa and K. Ogawa, Interfacial Oxidation and Boundary Amorphization Deposition Mechanisms of GaN Powder on Metallic Substrate by Low-Pressure Cold Spraying, Appl. Surf. Sci., 2023, 614, p 156221. https://doi.org/10.1016/j.apsusc.2022.15622110.1016/j.apsusc.2022.156221 ↗
42. V. Mahalingam, M. Tan, P. Munusamy, J.B. Gilroy, F.C.J.M. Van Veggel and M. Raudsepp, Bright Blue Photo- and Electroluminescence from Eu2+-Doped GaN/SiO2 Nanocomposites, Adv. Func. Mater., 2007, 17, p 3462–3469. https://doi.org/10.1002/ADFM.20060123610.1002/ADFM.200601236 ↗
43. X. Shen, D. Wang, J. Ning, B. Wang, H. Guo, C. Zhang, Y. Jia, J. Dong, X. Feng, X. Wang, J. Zhang and Y. Hao, MMA-Enabled Ultraclean Graphene Transfer for Fast-Response Graphene/GaN Ultraviolet Photodetectors, Carbon, 2020, 169, p 92–98. https://doi.org/10.1016/j.carbon.2020.07.02910.1016/j.carbon.2020.07.029 ↗
44. Z. Mao, K. Yoshida and J. Kim, Developing O/O (oil-in-oil) Droplet Generators on a Chip by Using ECF (Electro-Conjugate Fluid) Micropumps, Sens. Actuators, B Chem., 2019, 296, p 126669. https://doi.org/10.1016/j.snb.2019.12666910.1016/j.snb.2019.126669 ↗
45. Z. Li, A. Suzuki, N. Takata and M. Kobashi, Pressure-Less Melt Infiltration Characteristics of Mg Melt into Ti Powder Preforms with Various Pore Structures: Toward the Application to the Binder Jetting Additive Manufacturing, J. Mater. Process. Technol., 2024, 331, p 118509. https://doi.org/10.1016/j.jmatprotec.2024.11850910.1016/j.jmatprotec.2024.118509 ↗
46. R. Yao, Z. Li, L. Bao, R. Deng, K. Zheng, Y. Hu, J. Li, H. Zhang, S. Tu, R. Shi and J. Wu, Superior Stability of Li5Mg@ Cu Anodes for Lithium Metal Batteries: Investigating the Suppression Effects of Magnesium on Lithium Dendrite Growth, J. Mater. Sci. Technol., 2025, 211, p 288–302. https://doi.org/10.1016/j.jmst.2024.04.06510.1016/j.jmst.2024.04.065 ↗
47. Y. Xiong, Y. Watanabe, Y. Shibayama, N. Mary and S. Zhou, Amount of Hydrogen Absorbed into 316L Austenitic Stainless Steel and its Correlation with Properties of Oxide Film, Dissolved Oxygen Concentration and Low-Cycle Fatigue Behaviors of this Material in Borated and Lithiated High Temperature Water, Corros. Sci., 2022, 209, p 110793. https://doi.org/10.1016/j.corsci.2022.11079310.1016/j.corsci.2022.110793 ↗
48. S. Liao, X. Zhou, X. Chen, Z. Li, S. Yamashita, C. Zhang and H. Kita, Development of Macro-Encapsulated Phase-Change Material Using Composite of NaCl-Al2O3 with Characteristics of Self-Standing, Processes, 2024, 12, p 1123.10.3390/pr12061123 ↗
49. J. Akedo, Aerosol Deposition of Ceramic Thick Films at Room Temperature: Densification Mechanism of Ceramic Layers, J. Am. Ceram. Soc., 2006, 89, p 1834–1839. https://doi.org/10.1111/J.1551-2916.2006.01030.X10.1111/J.1551-2916.2006.01030.X ↗