journal article·2025-04Open access

Cold Spraying of Mixed Metal Powders: A Modelling Framework for Predicting Deposition Efficiency and Coating Composition

Che Zhang, Tesfaye Molla, Christian Brandl, Jarrod Watts, Rick McCully, Caixian Tang, Graham Schaffer

Abstract

Abstract Cold spraying (CS) of composite coatings produced from mixed metal powders can exhibit enhanced functional properties over coatings made from pure metals. However, controlling the deposition efficiency and the resulting microstructure during CS is challenging due to interactions between different materials. In this study, we developed a modelling framework to predict the deposition efficiency (DE) of mixed metal powders and the resultant coating composition. This is achieved by predicting the critical and impact velocities as a function of particle size, which allows determination of the DEs of both matched (A/A or B/B) and mismatched (A/B or B/A) particle/substrate combinations. These DEs are then used to determine the overall DE of the composite coating and its composition by using a layer-wise deposition model. The modelling framework is validated by performing several CS experiments using Cu and Al particles together with SEM image analyses of the coating microstructures. We find that in-flight interaction of particles of different masses has a significant effect on the impact velocity and hence DE of composite coatings. By effectively predicting DE and coating composition, the proposed model serves as a valuable tool for optimizing cold spray parameters, reducing trial-and-error costs and time, and accelerating the development of novel composite coatings with enhanced properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Materials Engineering and Processing · Flame retardant materials and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. S. Yin, P. Cavaliere, B. Aldwell, R. Jenkins, H.L. Liao, W.Y. Li, and R. Lupoi, Cold Spray Additive Manufacturing and Repair: Fundamentals and Applications, Addit. Manuf., 2018, 21, p 628-650.
2. W.Y. Li, K. Yang, S. Yin, X.W. Yang, Y.X. Xu, and R. Lupoi, Solid-State Additive Manufacturing and Repairing by Cold Spraying: A Review, J. Mater. Sci. Technol., 2018, 34(3), p 440-457.10.1016/j.jmst.2017.09.015 ↗
3. F.N. Lomo, M.J. Patel, A. Vargas-Uscategui, P.C. King, and I.S. Cole, A Design and Optimisation Framework for Cold Spray Additive Manufacturing of Lightweight Aerospace Structural Components, Addit. Manuf., 2023, 78, p 103891.
4. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, and M. Dao, Cold Spray Coating: Review of Material Systems and Future Perspectives, Surf. Eng., 2014, 30(6), p 369-U29.10.1179/1743294414Y.0000000270 ↗
5. H. Assadi, H. Kreye, F. Gartner, and T. Klassen, Cold Spraying—A Materials Perspective, Acta Mater., 2016, 116, p 382-407.10.1016/j.actamat.2016.06.034 ↗
6. W. Sun, X. Chu, H.M. Lan, R.Z. Huang, J.B. Huang, Y.C. Xie, J. Huang, and G.S. Huang, Current Implementation Status of Cold Spray Technology: A Short Review, J. Therm. Spray Technol., 2022, 31(4), p 848-865.10.1007/s11666-022-01382-4 ↗
7. M.A. Adaan-Nyiak and A.A. Tiamiyu, Recent Advances on Bonding Mechanism in Cold Spray Process: A Review of Single-Particle Impact Methods, J. Mater. Res., 2023, 38(1), p 69-95.10.1557/s43578-022-00764-2 ↗
8. Z.Y. Wang, P.C. Mao, C.J. Huang, P.F. Yu, W.Y. Li, and S. Yin, Deposition Mechanism of Ceramic Reinforced Metal Matrix Composites Via Cold Spraying, Addit. Manuf., 2024, 85, p 104167.
9. C.J. Huang, A. List, J.J. Shen, B.L. Fu, S. Yin, T. Chen, B. Klusemann, F. Gartner, and T. Klassen, Tailoring Powder Strengths for Enhanced Quality of Cold Sprayed Al6061 Deposits, Mater. Des., 2022, 215, p 110494.10.1016/j.matdes.2022.110494 ↗
10. A.M. Vilardell, N. Cinca, S. Dosta, I.G. Cano, and J.M. Guilemany, Feasibility of Using Low Pressure Cold Gas Spray for the Spraying of Thick Ceramic Hydroxyapatite Coatings, Int. J. Appl. Ceram. Technol., 2019, 16(1), p 221-229.10.1111/ijac.13088 ↗
11. X.T. Luo, M.L. Yao, N. Ma, M. Takahashi, and C.J. Li, Deposition Behavior, Microstructure and Mechanical Properties of An In-Situ Micro-Forging Assisted Cold Spray Enabled Additively Manufactured Inconel 718 Alloy, Mater. Des., 2018, 155, p 384-395.10.1016/j.matdes.2018.06.024 ↗
12. Y. Ichikawa and K. Ogawa, Effect of Substrate Surface Oxide Film Thickness on Deposition Behavior and Deposition Efficiency in the Cold Spray Process, J. Therm. Spray Technol., 2015, 24(7), p 1269-1276.10.1007/s11666-015-0299-y ↗
13. A.A. Hemeda, C. Zhang, X.Y. Hu, D. Fukuda, D. Cote, I.M. Nault, A. Nardi, V.K. Champagne, Y. Ma, and J.W. Palko, Particle-Based Simulation of Cold Spray: Influence of Oxide Layer on Impact Process, Addit. Manuf., 2021, 37, p 101517.
14. X.M. Wang, F. Feng, M.A. Klecka, M.D. Mordasky, J.K. Garofano, T. El-Wardany, A. Nardi, and V.K. Champagne, Characterization and Modeling of the Bonding Process in Cold Spray Additive Manufacturing, Addit. Manuf., 2015, 8, p 149-162.
15. L. Alonso, M.A. Garrido-Maneiro, and P. Poza, A study of the parameters affecting the particle velocity in cold-spray: Theoretical results and comparison with experimental data, Addit. Manuf., 2023, 67, p 103479.
16. L. Palodhi and P.K. Ray, Critical Velocity for Cold-Sprayed Coatings, Trans. Indian Inst. Met, 2024, 77(9), p 2277-2291.10.1007/s12666-024-03360-6 ↗
17. F. Raletz, M. Vardelle, and G. Ezo’o, Critical Particle Velocity Under Cold Spray Conditions, Surf. Coat. Technol., 2006, 201(5), p 1942-1947.10.1016/j.surfcoat.2006.04.061 ↗
18. P. Gao, C. Zhang, R. Wang, G.Y. Deng, J.Q. Li, and L.H. Su, Tamping Effect During Additive Manufacturing of Copper Coating by Cold Spray: A Comprehensive Molecular Dynamics Study, Addit. Manuf., 2023, 66, p 103448.
19. M. Hassani, D. Veysset, Y.C. Sun, K.A. Nelson, and C.A. Schuh, Microparticle Impact-Bonding Modes for Mismatched Metals: From co-Deformation to Splatting and Penetration (vol 199, pg 480, 2020), Acta Materialia 236 (2022).10.1016/j.actamat.2022.118116 ↗
20. H.Q. Che, X. Chu, P. Vo, and S. Yue, Metallization of Various Polymers by Cold Spray, J. Therm. Spray Technol., 2018, 27(1-2), p 169-178.10.1007/s11666-017-0663-1 ↗
21. A. Moridi, S.M. Hassani-Gangaraj, and M. Guagliano, A Hybrid Approach to Determine Critical and Erosion Velocities in the Cold Spray Process, Appl. Surf. Sci., 2013, 273, p 617-624.10.1016/j.apsusc.2013.02.089 ↗
22. T. Schmidt, F. Gartner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54(3), p 729-742.10.1016/j.actamat.2005.10.005 ↗
23. X.L. Zhou, S.J. Mou, X.K. Wu, and J.S. Zhang, Deposition Behavior of Mixed Binary Metallic Powders in Cold Spraying Process, Appl. Surf. Sci., 2011, 257(24), p 10628-10633.10.1016/j.apsusc.2011.07.061 ↗
24. A. Sova, M. Doubenskaia, E. Trofimov, M. Samodurova, V. Ulianitsky, and I. Smurov, Cold Spray of Metal Powder Mixtures: Achievements, Issues and Perspectives, Trans. Indian Inst. Met., 2021, 74(3), p 559-570.10.1007/s12666-020-02165-7 ↗
25. X. Chu, H.Q. Che, and S. Yue, Understanding the Cold Spray Deposition Characteristics of Mixed Metal Powders, Mrs Adv., 2019, 4(55-56), p 2989-2995.10.1557/adv.2019.418 ↗
26. R. Nikbakht, H. Assadi, K. Jahani, M. Saadati, and B. Jodoin, Cold Spray Deformation and Deposition of Blended Feedstock Powders Not Necessarily Obey the Rule of Mixture, Surf. Coat. Technol., 2021, 424, p 127644.10.1016/j.surfcoat.2021.127644 ↗
27. A.C. Liberati, H.Q. Che, P. Vo, and S. Yue, Influence of Secondary Component Hardness When Cold Spraying Mixed Metal Powders on Carbon Fiber Reinforced Polymers, J. Therm. Spray Technol., 2021, 30(5), p 1239-1253.10.1007/s11666-021-01197-9 ↗
28. L.W. He and M. Hassani, A Review of the Mechanical and Tribological Behavior of Cold Spray Metal Matrix Composites, J. Therm. Spray Technol., 2020, 29(7), p 1565-1608.10.1007/s11666-020-01091-w ↗
29. W.Y. Li, K. Yang, D.D. Zhang, X.L. Zhou, and X.P. Guo, Interface Behavior of Particles Upon Impacting During Cold Spraying of Cu/Ni/Al Mixture, Mater. Des., 2016, 95, p 237-246.10.1016/j.matdes.2016.01.122 ↗
30. T. Liu, M.D. Vaudin, J.R. Bunn, T. Ungár, and L.N. Brewer, Quantifying Dislocation Density in Al-Cu Coatings Produced by Cold Spray Deposition, Acta Mater., 2020, 193, p 115-124.10.1016/j.actamat.2020.04.040 ↗
31. L.M. Pereira, A. Zúñiga, B. Jodoin, R.G.A. Veiga, and S. Rahmati, Unraveling Jetting Mechanisms in High-Velocity Impact of Copper Particles Using Molecular Dynamics Simulations, Addit. Manuf., 2023, 75, p 103775.
32. W.Y. Li, H. Assadi, F. Gaertner, and S. Yin, A Review of Advanced Composite and Nanostructured Coatings by Solid-State Cold Spraying Process, Crit. Rev. Solid State Mater. Sci., 2019, 44(2), p 109-156.10.1080/10408436.2017.1410778 ↗
33. L.D. Gilmore, A.R. Neiser, F.M. Smith, and J.T. Roemer, Particle Velocity and Deposition Efficiency in the Cold Spray Process, J. Therm. Spray Technol., 1999, 8, p 576-582.10.1361/105996399770350278 ↗
34. C. Zhang, T. Molla, C. Brandl, J. Watts, R. McCully, C. Tang, and G. Schaffer, Critical Velocity and Deposition Efficiency in Cold Spray: A Reduced-Order Model and Experimental Validation, J. Manuf. Process., 2025, 134, p 547-557.10.1016/j.jmapro.2024.12.077 ↗
35. M. Hassani-Gangaraj, D. Veysset, V.K. Champagne, K.A. Nelson, and C.A. Schuh, Adiabatic Shear Instability is Not Necessary for Adhesion in Cold Spray, Acta Mater., 2018, 158, p 430-439.10.1016/j.actamat.2018.07.065 ↗
36. M. Hassani-Gangaraj, D. Veysset, V.K. Champagne, K.A. Nelson, and C.A. Schuh, Response to Comment on “Adiabatic shear Instability is Not Necessary for Adhesion in Cold Spray,” Scripta Mater., 2019, 162, p 515-519.10.1016/j.scriptamat.2018.12.015 ↗
37. S. Suresh, S.W. Lee, M. Aindow, H.D. Brody, V.K. Champagne, and A.M. Dongare, Mesoscale Modeling of Jet Initiation Behavior and Microstructural Evolution During Cold Spray Single Particle Impact, Acta Mater., 2020, 182, p 197-206.10.1016/j.actamat.2019.10.039 ↗
38. M. Hassani-Gangaraj, D. Veysset, K.A. Nelson, and C.A. Schuh, In-Situ Observations of Single Micro-Particle Impact Bonding, Scripta Mater., 2018, 145, p 9-13.10.1016/j.scriptamat.2017.09.042 ↗
39. M. Hassani-Gangaraj, D. Veysset, K.A. Nelson, and C.A. Schuh, Supersonic Impact of Metallic Micro-Particles, arXiv preprint arXiv:1612.08081. (2016).
40. I. Dowding, M. Hassani, Y.C. Sun, D. Veysset, K.A. Nelson, and C.A. Schuh, Particle Size Effects in Metallic Microparticle Impact-Bonding, Acta Mater., 2020, 194, p 40-48.10.1016/j.actamat.2020.04.044 ↗
41. X.K. Suo, S. Yin, M.P. Planche, T.K. Liu, and H.L. Liao, Strong Effect of Carrier Gas Species on Particle Velocity During Cold Spray Processes, Surf. Coat. Technol., 2015, 268, p 90-93.10.1016/j.surfcoat.2014.04.039 ↗
42. S. Yin, Q. Liu, H.L. Liao, and X.F. Wang, Effect of Injection Pressure on Particle Acceleration, Dispersion and Deposition in Cold Spray, Comput. Mater. Sci., 2014, 90, p 7-15.10.1016/j.commatsci.2014.03.055 ↗
43. D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, T.J. Roemer, and M.F. Smith, Particle velocity and deposition efficiency in the cold spray process, J. Therm. Spray Technol., 1999, 8(4), p 576-582.10.1361/105996399770350278 ↗
44. H. Assadi, T. Schmidt, H. Richter, J.O. Kliemann, K. Binder, F. Gartner, T. Klassen, and H. Kreye, On Parameter Selection in Cold Spraying, J. Therm. Spray Technol., 2011, 20(6), p 1161-1176.10.1007/s11666-011-9662-9 ↗
45. S.J. Hu, H.J. Li, L.Y. Zhang, and Y.Z. Xu, Cold Spray Process for Co-Deposition of Copper and Aluminum Particles, Coatings, 2023, 13(11), p 1953.10.3390/coatings13111953 ↗
46. S.V. Klinkov and V.F. Kosarev, Measurements of Cold Spray Deposition Efficiency, J. Therm. Spray Technol., 2006, 15(3), p 364-371.10.1361/105996306X124365 ↗