Cold Spray MCrAlY Coatings on Single-Crystal Superalloy Using Nitrogen: Properties and Economics
Source abstract
Abstract
Cold spray (CS) has been proven a promising manufacturing process for the MCrAlY coatings deposition. In this study, NiCoCrAlTaY coatings were deposited on single-crystal nickel-based superalloy (CMSX-4) substrates using the CS technique. Nitrogen and moderate spray parameters were used, and the resulting MCrAlY coatings were compared to coatings sprayed using helium under similar spray conditions. It was found that, contrary to general expectation, favorable coating characteristics were achieved when nitrogen was used. This is attributed to low deposition efficiency under the studied spray conditions, resulting in significant particle impingement that promotes overall particle deformation in the coatings sprayed using nitrogen. However, low deposition efficiency may lead to elevated process cost, despite great gas cost savings by using nitrogen, due to significant increases in powder waste and cost. As such, recycling of the non-deposited powder was explored in an aim to reduce powder cost when using nitrogen. A general cost model that considers the benefits of powder recycling was proposed for the CS process. It was demonstrated that the use of nitrogen and powder recycling can be economical over CS using helium, while producing MCrAlY coatings with desirable properties that are potentially beneficial to the oxidation performance of the coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkimov, and V. Fomin, Cold Spray Technology, Elsevier, Amsterdam, 2007
2. E. Irissou, J.G. Legoux, A.N. Ryabinin, B. Jodoin, and C. Moreau, Review on Cold Spray Process and Technology: Part I—Intellectual Property, J. Therm. Spray Technol., 2008, 17(4), p 495-51610.1007/s11666-008-9203-3 ↗
3. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51(15), p 4379-439410.1016/S1359-6454(03)00274-X ↗
4. B. Jodoin, L. Ajdelsztajn, E. Sansoucy, A. Zuniga, P. Richer, and E.J. Lavernia, Effect of Particle Size, Morphology, and Hardness on Cold Gas Dynamic Sprayed Aluminum Alloy Coatings, Surf. Coat. Technol., 2006, 201(6), p 3422-342910.1016/j.surfcoat.2006.07.232 ↗
5. F. Gärtner, T. Stoltenhoff, T. Schmidt, and H. Kreye, The Cold Spray Process and Its Potential for Industrial Applications, J. Therm. Spray Technol., 2006, 15(2), p 223-23210.1361/105996306X108110 ↗
6. L. Ajdelsztajn, B. Jodoin, G.E. Kim, and J.M. Schoenung, Cold Spray Deposition of Nanocrystalline Aluminum Alloys, Metall. Mater. Trans. A, 2005, 36A(3), p 657-66610.1007/s11661-005-0182-4 ↗
7. T. Hussain, Cold Spraying of Titanium: A Review of Bonding Mechanisms, Microstructure and Properties, Key Eng. Mater., 2013, 533, p 53-9010.4028/www.scientific.net/KEM.533.53 ↗
8. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, and M. Dao, Cold Spray Coating: Review of Material Systems and Future Perspectives, Surf. Eng., 2014, 36(6), p 369-39510.1179/1743294414Y.0000000270 ↗
9. S.M. Hassani-Gangaraj, A. Moridi, and M. Guagliano, Critical Review of Corrosion Protection by Cold Spray Coatings, Surf. Eng., 2015, 31(11), p 803-81510.1179/1743294415Y.0000000018 ↗
10. H. Assadi, H. Kreye, F. Gartner, and T. Klassen, Cold Spraying—A Materials Perspective, Acta Mater., 2016, 116, p 382-40710.1016/j.actamat.2016.06.034 ↗
11. J. Pattison, S. Celotto, R. Morgan, M. Bray, and W. O’Neill, Cold Gas Dynamic Manufacturing: A Non-thermal Approach to Freeform Fabrication, Int. J. Mach. Tool Manuf., 2007, 47(3-4), p 627-63410.1016/j.ijmachtools.2006.05.001 ↗
12. A. Sova, S. Grigoriev, A. Okunkova, and I. Smurov, Potential of Cold Gas Dynamic Spray as Additive Manufacturing Technology, Int. J. Adv. Manuf. Technol., 2013, 69(9-12), p 2269-227810.1007/s00170-013-5166-8 ↗
13. R.N. Raoelison, C. Verdy, and H. Liao, Cold Gas Dynamic Spray Additive Manufacturing Today: Deposit Possibilities, Technological Solutions and Viable Applications, Mater. Des., 2017, 133, p 266-28710.1016/j.matdes.2017.07.067 ↗
14. S. Pathak and G.C. Saha, Development of Sustainable Cold Spray Coatings and 3D Additive Manufacturing Components for Repair/Manufacturing Applications: A Critical Review, Coatings, 2017, 7(8), p 12210.3390/coatings7080122 ↗
15. R.N. Raoelison, Y. Xie, T. Sapanathan, M.P. Planche, R. Kromer, S. Costil, and C. Langlade, Cold Gas Dynamic Spray Technology: A Comprehensive Review of Processing Conditions for Various Technological Developments Till to Date, Addit. Manuf., 2018, 19, p 134-159
16. J.R. Davis, Handbook of Thermal Spray Technology, ASM International, Cleveland, 2004
17. J. Villafuerte, Modern Cold Spray: Materials, Process, and Applications, Springer, Berlin, 201510.1007/978-3-319-16772-5 ↗
18. V.K. Champagne, The Cold Spray Materials Deposition Process: Fundamentals and Applications, Taylor & Francis, London, 2007
19. Y. Li, C.J. Li, G.J. Yang, and L.K. Xing, Thermal Fatigue Behavior of Thermal Barrier Coatings with the MCrAlY Bond Coats by Cold Spraying and Low-Pressure Plasma Spraying, Surf. Coat. Technol., 2010, 205(7), p 2225-223310.1016/j.surfcoat.2010.08.144 ↗
20. P. Richer, A. Zuniga, M. Yandouzi, and B. Jodoin, CoNiCrAlY Microstructural Changes Induced During Cold Gas Dynamic Spraying, Surf. Coat. Technol., 2008, 203(3-4), p 364-37110.1016/j.surfcoat.2008.09.014 ↗
21. P. Richer, M. Yandouzi, L. Beauvais, and B. Jodoin, Oxidation Behaviour of CoNiCrAlY Bond Coats Produced by Plasma, HVOF and Cold Gas Dynamic Spraying, Surf. Coat. Technol., 2010, 204(24), p 3962-397410.1016/j.surfcoat.2010.03.043 ↗
22. A. Manap, A. Nakano, and K. Ogawa, The Protectiveness of Thermally Grown Oxides on Cold Sprayed CoNiCrAlY Bond Coat in Thermal Barrier Coating, J. Therm. Spray Technol., 2012, 21(3-4), p 586-59610.1007/s11666-012-9749-y ↗
23. Q. Zhang, C.J. Li, C.X. Li, G.J. Yang, and S.C. Lui, Study of Oxidation Behavior of Nanostructured NiCrAlY Bond Coatings Deposited by Cold Spraying, Surf. Coat. Technol., 2008, 202(14), p 3378-338410.1016/j.surfcoat.2007.12.028 ↗
24. Y. Li, C.J. Li, Q.A. Zhang, L.K. Xing, and G.J. Yang, Effect of Chemical Compositions and Surface Morphologies of MCrAlY Coating on Its Isothermal Oxidation Behavior, J. Therm. Spray Technol., 2011, 20(1-2), p 121-13110.1007/s11666-010-9590-0 ↗
25. K.M. Doleker and A.C. Karaoglanli, Comparison of Oxidation Behavior of Shot-Peened Plasma Spray Coatings with Cold Gas Dynamic Spray Coatings, Oxid. Met., 2017, 88(1), p 121-13210.1007/s11085-016-9691-3 ↗
26. A.C. Karaoglanli and A. Turk, Isothermal Oxidation Behavior and Kinetics of Thermal Barrier Coatings Produced by Cold Gas Dynamic Spray Technique, Surf. Coat. Technol., 2017, 318, p 72-8110.1016/j.surfcoat.2016.12.021 ↗
27. W.R. Chen, E. Irissou, X. Wu, J.G. Legoux, and B.R. Marple, The Oxidation Behavior of TBC with Cold Spray CoNiCrAlY Bond Coat, J. Therm. Spray Technol., 2011, 20(1-2), p 132-13810.1007/s11666-010-9601-1 ↗
28. V. Crespo, I.G. Cano, S. Dosta, and J.M. Guilemany, The Influence of Feedstock Powders on the CGS Deposition Efficiency of Bond Coats for TBCs, J. Alloys Compd., 2015, 622, p 394-40110.1016/j.jallcom.2014.09.216 ↗
29. A. Bonadei and T. Marrocco, Cold Sprayed MCrAlY + X Coating for Gas Turbine Blades and Vanes, Surf. Coat. Technol., 2014, 242, p 200-20610.1016/j.surfcoat.2013.08.019 ↗
30. S. Bose and J. DeMasiMarcin, Thermal Barrier Coating Experience in Gas Turbine Engines at Pratt & Whitney, J. Therm. Spray Technol., 1997, 6(1), p 99-10410.1007/BF02646318 ↗
31. D.J. Wortman, B.A. Nagaraj, and E.C. Duderstadt, Thermal Barrier Coatings for Gas Turbine Use, Mater. Sci. Eng., 1989, A121, p 433-44010.1016/0921-5093(89)90798-3 ↗
32. M.P. Taylor, An Oxidation Study of an MCrAlY Overlay Coating, Mater. High Temp., 2005, 22(3-4), p 433-43610.1179/mht.2005.051 ↗
33. R. Sivakumar and B.L. Mordike, High Temperature Coatings for Gas Turbine Blades: A Review, Surf. Coat. Technol., 1989, 37(2), p 139-16010.1016/0257-8972(89)90099-6 ↗
34. T.N. Rhys-Jones, Coatings for Blade and Vane Applications in Gas-Turbines, Corros. Sci., 1989, 29(6), p 623-64610.1016/0010-938X(89)90104-2 ↗
35. J.R. Nicholls, Designing Oxidation-Resistant Coatings, Journal of the Minerals Metals & Materials Society, 2000, 52(1), p 28-3510.1007/s11837-000-0112-2 ↗
36. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296(5566), p 280-28410.1126/science.1068609 ↗
37. T.E. Strangman, Thermal Barrier Coatings for Turbine Airfoils, Thin Solid Films, 1985, 127, p 93-10510.1016/0040-6090(85)90215-9 ↗
38. D. Seo, K. Ogawa, Y. Suzuki, K. Ichimura, T. Shoji, and S. Murata, Comparative Study on Oxidation Behavior of Selected MCrAlY Coatings by Elemental Concentration Profile Analysis, Appl. Surf. Sci., 2008, 255(5), p 2581-259010.1016/j.apsusc.2008.07.141 ↗
39. M.T. Pace, R.C. Thomson, and J. Wells, Oxidation of MCrAlY Coatings on Ni-Based Superalloys, Superalloys, 2008, 2008, p 651-660
40. A. Fossati, M. Di Ferdinando, A. Lavacchi, U. Bardi, C. Giolli, and A. Scrivani, Improvement of the Isothermal Oxidation Resistance of CoNiCrAlY Coating Sprayed by High Velocity Oxygen Fuel, Surf. Coat. Technol., 2010, 204(21-22), p 3723-372810.1016/j.surfcoat.2010.04.059 ↗
41. W.-X. Weng, Y.-M. Wang, Y.-M. Liao, C.-C. Li, and Q. Li, Comparison of Microstructural Evolution and Oxidation Behaviour of NiCoCrAlY and CoNiCrAlY as Bond Coats Used for Thermal Barrier Coatings, Surf. Coat. Technol., 2018, 352, p 285-29410.1016/j.surfcoat.2018.08.024 ↗
42. M. Shibata, S. Kuroda, H. Murakami, M. Ode, M. Watanabe, and Y. Sakamoto, Comparison of Microstructure and Oxidation Behavior of CoNiCrAlY Bond Coatings Prepared by Different Thermal Spray Processes, Mater. Trans., 2006, 47(7), p 1638-164210.2320/matertrans.47.1638 ↗
43. W.R. Chen, X. Wu, B.R. Marple, D.R. Nagy, and P.C. Patnaik, TGO Growth Behaviour in TBCs With APS and HVOF Bond Coats, Surf. Coat. Technol., 2008, 202(12), p 2677-268310.1016/j.surfcoat.2007.09.042 ↗
44. P. Song, D. Naumenko, R. Vassen, L. Singheiser, and W.J. Quadakkers, Effect of Oxygen Content in NiCoCrAlY Bondcoat on the Lifetimes of EB-PVD and APS Thermal Barrier Coatings, Surf. Coat. Technol., 2013, 221, p 207-21310.1016/j.surfcoat.2013.01.054 ↗
45. A. Gil, V. Shemet, R. Vassen, M. Subanovic, J. Toscano, D. Naumenko, L. Singheiser, and W.J. Quadakkers, Effect of Surface Condition on the Oxidation Behaviour of MCrAlY Coatings, Surf. Coat. Technol., 2006, 201(7), p 3824-382810.1016/j.surfcoat.2006.07.252 ↗
46. L.Y. Ni, Z.L. Wu, and C.G. Zhou, Effects of Surface Modification on Isothermal Oxidation Behavior of HVOF-Sprayed NiCrAlY Coatings, Prog. Nat. Sci., 2011, 21(2), p 173-17910.1016/S1002-0071(12)60052-5 ↗
47. A. Fossati, M. DiFerdinando, U. Bardi, A. Scrivani, and C. Giolli, Influence of Surface Finishing on the Oxidation Behaviour of VPS MCrAlY Coatings, J. Therm. Spray Technol., 2012, 21(2), p 314-32410.1007/s11666-011-9705-2 ↗
48. L.Y. Ni and C.G. Zhou, Effects of Surface Modification on Thermal Cycling Lifetime of Thermal Barrier Coatings With HVOF NiCrAlY Bond Coat, Prog. Nat. Sci., 2012, 22(3), p 237-24310.1016/j.pnsc.2012.04.007 ↗
49. R.C. Dykhuizen and M.F. Smith, Gas Dynamic Principles of Cold Spray, J. Therm. Spray Technol., 1998, 7(2), p 205-21210.1361/105996398770350945 ↗
50. D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, T.J. Roemer, and M.F. Smith, Particle Velocity and Deposition Efficiency in the Cold Spray Process, J. Therm. Spray Technol., 1999, 8(4), p 576-58210.1361/105996399770350278 ↗
51. M. Grujicic, C.L. Zhao, C. Tong, W.S. Derosset, and D. Helfritch, Analysis of the Impact Velocity of Powder Particles in the Cold-Gas Dynamic-Spray Process, Mater. Sci. Eng. A Struct., 2004, 368(1-2), p 222-23010.1016/j.msea.2003.10.312 ↗
52. B. Jodoin, F. Raletz, and M. Vardelle, Cold Spray Modeling and Validation Using an Optical Diagnostic Method, Surf. Coat. Technol., 2006, 200(14-15), p 4424-443210.1016/j.surfcoat.2005.02.209 ↗
53. A. Saltzman, Concerns Rising Over Global Helium Shortage. CBC/Radio-Canada, https://www.cbc.ca/news/business/helium-smartphones-fibre-optic-cable-mri-internet-scuba-1.5084212, 2019. Accessed 16 September 2019
54. B. Jodoin, D.L. Guo, and D. MacDonald, Personal Communication With Gas Supplier (Linde Gas Ottawa), 2019
55. A.S. Khanna and W.S. Rathod, Development of CoNiCrAlY Oxidation Resistant Hard Coatings Using High Velocity Oxy Fuel and Cold Spray Techniques, Int. J. Refract. Met. H, 2015, 49, p 374-38210.1016/j.ijrmhm.2014.08.010 ↗
56. A.N. Papyrin, Cold Spray Process for Cost-Sensitive Applications, High Performance Metallic Materials for Cost Sensitive Applications, E. Chen, R.R. Boyer, E.M. Taleff, L. Lu, D.L. Zhang, C.M. Ward-Close, D. Elizer, and F.H. Froes, Ed., The Minerals, Metals & Materials Society, Warrendale, 2002, p 137-14910.1002/9781118788028.ch16 ↗
57. J. Perry, P. Richer, B. Jodoin, and E. Matte, Pin Fin Array Heat Sinks by Cold Spray Additive Manufacturing: Economics of Powder Recycling, J. Therm. Spray Technol., 2019, 28(1), p 144-16010.1007/s11666-018-0758-3 ↗
58. R.C. Reed, The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 200610.1017/CBO9780511541285 ↗
59. MCrAlY Alloy Powder Materials for Thermal Spray (NiCoCrAlY Powders). Oerlikon Metco, https://www.oerlikon.com/metco/en/products-services/coating-materials/coating-materials-thermal-spray/mcraly-alloys/, 2018. Accessed 28 December 2019
60. K. Spencer, V. Luzin, N. Matthews, and M.X. Zhang, Residual Stresses in Cold Spray Al Coatings: The Effect of Alloying and of Process Parameters, Surf. Coat. Technol., 2012, 206(19-20), p 4249-425510.1016/j.surfcoat.2012.04.034 ↗
61. B. Marzbanrad, H. Jahed, and E. Toyserkani, On the Evolution of Substrate’s Residual Stress During Cold Spray Process: A Parametric Study, Mater Des., 2018, 138, p 90-10210.1016/j.matdes.2017.10.062 ↗
62. P. Caron and T. Khan, Evolution of Ni-Based Superalloys for Single Crystal Gas Turbine Blade Applications, Aerosp. Sci. Technol., 1999, 3(8), p 513-52310.1016/S1270-9638(99)00108-X ↗
63. M. Tahari and F. Naeimi, Effect of Surface Morphologies on the Isothermal Oxidation Behavior of MCrAlY Coatings Fabricated by High-Velocity Oxyfuel Processes, Int. J. Eng. Trans. C Asp., 2017, 30(3), p 432
64. A. Hesnawi, H.F. Li, Z.H. Zhou, S.K. Gong, and H.B. Xu, Effect of Surface Condition During Pre-oxidation Treatment on Isothermal Oxidation Behavior of MCrAlY Bond Coat Prepared by EB-PVD, Surf. Coat. Technol., 2007, 201(15), p 6793-679610.1016/j.surfcoat.2006.09.076 ↗
65. C. Borchers, T. Stoltenhoff, M. Hahn, M. Schulze, H. Assadi, C. Suryanarayana, F. Gartner, and T. Klassen, Strain-Induced Phase Transformation of MCrAlY, Adv. Eng. Mater., 2015, 17(5), p 723-73110.1002/adem.201400174 ↗
66. Z.Y. Liu, W. Gao, K.L. Dahm, and F.H. Wang, Oxidation Behaviour of Sputter-Deposited Ni-Cr-Al Micro-crystalline Coatings, Acta Mater., 1998, 46(5), p 1691-170010.1016/S1359-6454(97)00346-7 ↗
67. C. Kaplin and M. Brochu, The Effect of Grain Size on the Oxidation of NiCoCrAlY, Appl. Surf. Sci., 2014, 301, p 258-26310.1016/j.apsusc.2014.02.056 ↗
68. Y. Chen, X. Zhao, and P. Xiao, Effect of Microstructure on Early Oxidation of MCrAlY Coatings, Acta Mater., 2018, 159, p 150-16210.1016/j.actamat.2018.08.018 ↗
69. O. Stier, Fundamental Cost Analysis of Cold Spray, J. Therm. Spray Technol., 2014, 23(1-2), p 131-13910.1007/s11666-013-9972-1 ↗
70. D. MacDonald, S. Rahmati, B. Jodoin, and W. Birtch, An Economical Approach to Cold Spray Using In-Line Nitrogen-Helium Blending, J. Therm. Spray Technol., 2019, 28(1), p 161-17310.1007/s11666-018-0813-0 ↗
71. T. Han, Z. Zhao, B.A. Gillispie, and J.R. Smith, Effects of Spray Conditions on Coating Formation by the Kinetic Spray Process, J. Therm. Spray Technol., 2005, 14(3), p 373-38310.1361/105996305X59369 ↗