Microstructure Characterization of the FeAl2O4-Based Nanostructured Composite Coating Synthesized by Plasma Spraying Fe2O3/Al Powders
Source abstract
Abstract
The microstructure of the coating prepared by reactive plasma spraying Fe2O3/Al composite powders was characterized by x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The results indicated that the coating exhibited nanostructured microstructure which consisted of FeAl2O4, Fe or Fe solid solution, Al2O3 and a little FeAl. In the composite coating, spherical Fe particles (tens of nanometers to hundreds of nanometers) were distributed uniformly within the equiaxed and columnar nanograins FeAl2O4 matrix. There were two kinds of Al2O3 phases present in the composite coating. One kind was nano-sized Al2O3 particles uniformly dispersed within the matrix, forming eutectic structure of (FeAl2O4 + γ-Al2O3); the other was 1-1.5 μm Al2O3 particles embedded individually within the matrix. The composite coating had higher toughness than the conventional microstructured Al2O3 coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. B. Wielage, S. Steinhäuser, and A. Henker, Manufacture and Properties of Composite Coatings: An Introduction, J. Therm. Spray Technol., 1999, 8(4), p 512-51610.1361/105996399770350188 ↗
2. F. Kikkawa, H. Tamura, and K. Kondo, Ti-B-C Composite Coating Produced by Electrothermally Exploded Powder-Spray Technique, J. Therm. Spray Technol., 2006, 15(1), p 92-9610.1361/105996306X92622 ↗
3. I. Ozdemir, I. Hamanaka, Y. Tsunekawa, and M. Okumiya, In-Process Exothermic Reaction in High-Velocity Oxyfuel and Plasma Spraying With SiO2/Ni/Al-Si-Mg Composite Powder, J. Therm. Spray Technol., 2005, 14(3), p 321-32910.1361/105996305X59459 ↗
4. A.J. Horlock, Z. Sadeghian, D.G. McCartney, and P.H. Shipway, High-Velocity Oxyfuel Reactive Spraying of Mechanically Alloyed Ni-Ti-C Powders, J. Therm. Spray Technol., 2005, 14(1), p 77-8410.1361/10599630522747 ↗
5. M. Shahien, M. Yamada, T. Yasui, and M. Fukumoto, Cubic Aluminum Nitride Coating Through Atmospheric Reactive Plasma Nitriding, J. Therm. Spray Technol., 2010, 19(3), p 635-64110.1007/s11666-010-9469-0 ↗
6. H. Wang, S. Zhang, J. Zhu, J. Huang, H. Liu, and H. Zhang, In Situ TiC-Reinforced Ni-Based Composite Coating Prepared by Flame Spraying Using Sucrose as the Source of Carbon, J. Therm. Spray Technol., 2009, 18(1), p 103-10910.1007/s11666-008-9284-z ↗
7. Z. Mao, J. Wang, B. Sun, and C. Yao, Properties of Reactive Plasma Sprayed TiB2-TiC0.3N0.7 Based Composite Coatings with Cr Addition and Laser Surface Treatment, J. Therm. Spray Technol., 2009, 18(4), p 563-57110.1007/s11666-009-9375-5 ↗
8. H.K. Kang and P.R. Taylor, Direct Production of Porous Cathode Material (La1−x Sr x MnO3) Using a Reactive DC Thermal Plasma Spray System, J. Therm. Spray Technol., 2001, 10(3), p 526-53110.1361/105996301770349312 ↗
9. N. Travitzky, P. Kumar, K.H. Sandhage, R. Janssen, and N. Claussen, Rapid Synthesis of Al2O3 Reinforced Fe-Cr-Ni Composites, Mater. Sci. Eng. A, 2003, 344, p 245-25210.1016/S0921-5093(02)00419-7 ↗
10. Y. Dong, D. Yan, J. He, X. Li, W. Feng, and H. Liu, Studies on Composite Coatings Prepared by Plasma Spraying Fe2O3-Al Self-Reaction Composite Powders, Surf. Coat. Technol., 2004, 179, p 223-22810.1016/S0257-8972(03)00815-6 ↗
11. P. Chakraborty, I.G. Sharma, A.K. Suri, and D.K. Bose, Studies on Preparation, Characterisation and Evaluation of Properties of Fe3Al-Based Intermetallic Alloy of Composition Fe-16Al-5.44Cr-1Nb-0.5C, J. Mater. Process. Technol., 2001, 115, p 413-42210.1016/S0924-0136(01)01008-1 ↗
12. S.C. Deevi, V.K. Sikka, C.J. Swindeman, and R.D. Seals, Application of Reaction Synthesis Principles to Thermal Spray Coatings, J. Mater. Sci., 1997, 32, p 3315-332510.1023/A:1018691826809 ↗
13. J. Yang, P. La, W. Liu, and Y. Hao, Microstructure and Properties of Fe3Al-Fe3AlC0.5 Composites Prepared by Self-Propagating High Temperature Synthesis Casting, Mater. Sci. Eng. A, 2004, 382, p 8-1410.1016/j.msea.2004.03.095 ↗
14. L. Menon, S. Patibandla, K. Bhargava Ram, S.I. Shkuratov, D. Aurongzeb, M. Holtz, J. Berg, J. Yun, and H. Temkin, Ignition Studies of Al/Fe2O3 Energetic Nanocomposites, Appl. Phys. Lett., 2004, 84, p 4735-473710.1063/1.1759387 ↗
15. T.M. Tillotson, A.E. Gash, R.L. Simpson, L.W. Hrubesh, J.H. Satcher, Jr., and J.F. Poco, Nanostructured Energetic Materials Using Sol-gel Methodologies, J. Non-Cryst. Solids, 2001, 285, p 338-34510.1016/S0022-3093(01)00477-X ↗
16. L. Duraes, B.F.O. Costa, R. Santos, A. Correia, J. Campos, and A. Portugal, Fe2O3/Aluminum Thermite Reaction Intermediate and Final Products Characterization, Mater. Sci. Eng. A, 2007, 465, p 199-21010.1016/j.msea.2007.03.063 ↗
17. V.A. Shabashov, V.V. Sagaradze, A.V. Litvinov, A.G. Mukoseev, and N.F. Vildanova, Mechanical Synthesis in the Iron Oxide-Metal System, Mater. Sci. Eng. A, 2005, 392, p 62-7210.1016/j.msea.2004.11.006 ↗
18. C. Cuadrado-Laborde, L.C. Damonte, and L. Mendoza-Zelis, Mechanochemical Reactions in Fe2O3-M (M: Al, Ti), Hyperfine Interact., 2001, 134, p 131-14010.1023/A:1013870113803 ↗
19. P. Matteazzi and G. Le Caer, Synthesis of Nanocrystalline Alumina-Metal Composites by Room-Temperature Ball-Milling of Metal Oxides and Aluminum, J. Am. Ceram. Soc., 1992, 75, p 2749-275510.1111/j.1151-2916.1992.tb05499.x ↗
20. D. Basset, P. Matteazzi, F. Miani, and G. Le Caer, Kinetic Effects in the Mechanically Activated Solid-State Reduction of Haematite, Hyperfine Interact., 1994, 94, p 2235-223810.1007/BF02063768 ↗
21. G.F. Goya and H.R. Rechenberg, Mechanosynthesis of Intermetallic Fe100−x Al x Obtained by Reduction of Al/Fe2O3 Composite, J. Phys. Condens. Matter, 2000, 12, p 10579-1059010.1088/0953-8984/12/50/318 ↗
22. C. Cuadrado-Laborde, L.C. Damonte, L. Mendoza-Zelis, L.M. Socolovsky, and I.L. Torriani, Magnetic Characterization of the Mechanically Induced Thermite Reaction between Fe2O3 and Al, Physica B, 2004, 354, p 125-12810.1016/j.physb.2004.09.033 ↗
23. P. Matteazzi and M. Alcala, Mechanomaking of Fe/Al2O3 and FeCr/Al2O3 Nanocomposites Powders Fabrication, Mater. Sci. Eng. A, 1997, 230, p 161-17010.1016/S0921-5093(97)00022-1 ↗
24. J. Mei, R.D. Halldearn, and P. Xiao, Mechanisms of the Aluminium-Iron Oxide Thermite Reaction, Scr. Mater., 1999, 41, p 541-54810.1016/S1359-6462(99)00148-7 ↗
25. H.Y. Liu, J.H. Huang, C.F. Yin, and J.G. Zhang, Microstructure and Properties of TiC-Fe Cermet Coatings by Reactive Flame Spraying Using Asphalt as Carbonaceous Precursor, Ceram. Int., 2007, 33, p 827-83510.1016/j.ceramint.2006.01.020 ↗
26. S. Jiansirisomboon, K.J.D. MacKenzie, S.G. Roberts, and P.S. Grant, Low Pressure Plasma-Sprayed Al2O3 and Al2O3/SiC Nanocomposite Coatings from Different Feedstock Powders, J. Eur. Ceram. Soc., 2003, 23, p 961-97610.1016/S0955-2219(02)00207-8 ↗