journal article·2019-08

Corrosion Resistance to Molten Zinc of a Novel Cermet Coating Deposited by Activated Combustion High-Velocity Air Fuel (AC-HVAF)

Xiaolong Xie, Fucheng Yin, Xinming Wang, Xuemei Ouyang, Minghuan Li, Jing Hu

Publisher page

Abstract

Molten zinc is very aggressive to austenitic stainless steels. In this study, a novel cermet coating consisting of FeB-12 wt.%Al0.25FeNiCoCr was deposited on the surface of 316L stainless steel to protect it from liquid zinc corrosion using activated combustion high-velocity air fuel (AC-HVAF). The microstructure and phase composition of the powders and coating were determined by scanning electron microscopy (SEM) with energy-dispersive x-ray spectroscopy (EDS) and x-ray diffraction (XRD) analysis. The thermal expansion coefficient, microhardness, thermal shock resistance, abrasive wear resistance, and corrosion resistance to molten zinc of the coating were investigated. The results showed that the first macrocrack appeared on the surface of the coating after 32 thermal shock cycles. Compared with the 316L stainless steel substrate, the abrasive wear resistance of the coating was twice as high. Also, the average corrosion rate of the FeB-12 wt.%Al0.25FeNiCoCr coating in molten zinc at 450 °C was 16.17 μm/day, much lower than the value of 115.44 μm/day for 316L stainless steel in molten zinc at 460 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. X. Ren, X. Mei, J. She, and J. Ma, Materials Resistance to Liquid Zinc Corrosion on Surface of Sink Roll, J. Iron Steel Res. Int., 2007, 14(5), p 130-13610.1016/S1006-706X(08)60066-7 ↗
2. S.A. Bobde and S.D. Kshirsagar, Improving the Sink Roll Life in Galvalume Using Material AT101 & the Various Thermal-Spray Coating on SS3l6L Roll Surface, Int. J. Soft Comput. Eng., 2013, 3(1), p 282-286
3. J.A. Morando, G. Ile, and Mich, Material Formulation for Galvanizing Equipment Submerged in Molten and Aluminum Zinc Melts, U.S. Patent 6,004,507, (1999)
4. P.K. Aw, A.L.K. Tan, T.P. Tan, and J. Qiu, Corrosion Resistance of Tungsten Carbide Based Cermet Coatings Deposited by High Velocity Oxy-Fuel Spray Process, Thin Solid Films, 2008, 516(16), p 5710-571510.1016/j.tsf.2007.07.065 ↗
5. A.C. Karaoglanli, M. Oge, K.M. Doleker, and M. Hotamis, Comparison of Tribological Properties of HVOF Sprayed Coatings with Different Composition, Surf. Coat. Technol., 2017, 318, p 299-30810.1016/j.surfcoat.2017.02.021 ↗
6. B. Wielage, A. Wank, H. Pokhmurska, T. Grund, C. Rupprecht, G. Reisel, and E. Friesen, Development and Trends in HVOF Spraying Technology, Surf. Coat. Technol., 2006, 201(5), p 2032-203710.1016/j.surfcoat.2006.04.049 ↗
7. T. Peat, A.M. Galloway, A.I. Toumpis, and D. Harvey, Evaluation of the Synergistic Erosion-Corrosion Behaviour of HVOF Thermal Spray Coatings, Surf. Coat. Technol., 2016, 299, p 37-4810.1016/j.surfcoat.2016.04.072 ↗
8. T. Tomita, Y. Takatani, Y. Kobayashi, Y. Harada, and H. Nakahira, Durability of WC/Co Sprayed Coatings in Molten Pure Zinc, ISIJ Int., 1993, 33(9), p 982-98810.2355/isijinternational.33.982 ↗
9. P. Mi, H. Zhao, T. Wang, and F. Ye, Sliding Wear Behavior of HVOF Sprayed WC-(Nano-WC-Co) Coating at Elevated Temperatures, Mater. Chem. Phys., 2018, 206, p 1-610.1016/j.matchemphys.2017.09.066 ↗
10. A.J. López and J. Rams, Protection of Carbon Steel against Molten Aluminum Attack and High Temperature Corrosion Using High Velocity Oxygen-Fuel WC-Co Coatings, Surf. Coat. Technol., 2015, 262, p 123-13310.1016/j.surfcoat.2014.12.023 ↗
11. H. Mizuno and J. Kitamura, MoB/CoCr Cermet Coatings by HVOF Spraying against Erosion by Molten Al-Zn Alloy, J. Therm. Spray Technol., 2007, 16(3), p 404-41310.1007/s11666-007-9046-3 ↗
12. H. Lv, P. Nie, Y. Yan, J. Wang, and B. Sun, Microstructure and Interfacial Adhesion of High Velocity Oxy-Fuel-Sprayed MoB-CoCr Alloy Coating on 316L Stainless Steel, Surf. Interface Anal., 2009, 41(9), p 725-72910.1002/sia.3079 ↗
13. H. Lv, J. Wang, Y. Yan, Q. An, P. Nie, and B. Sun, Characterisation of Detonation Sprayed Mo-Co-Cr-B Alloy Coatings, Mater. Sci. Technol., 2010, 26(8), p 950-95510.1179/026708309X12459430509373 ↗
14. R. Guo, C. Zhang, Q. Chen, Y. Yang, N. Li, and L. Liu, Study of Structure and Corrosion Resistance of Fe-Based Amorphous Coatings Prepared by HVAF and HVOF, Corros. Sci., 2011, 253(7), p 2351-235610.1016/j.corsci.2010.12.022 ↗
15. E. Sadeghimeresht, N. Markocsan, and P. Nylén, Microstructural Characteristics and Corrosion Behavior of HVAF- and HVOF-Sprayed Fe-Based Coatings, Surf. Coat. Technol., 2017, 318, p 365-37310.1016/j.surfcoat.2016.11.088 ↗
16. G. Bolelli, L.M. Berger, T. Börner, H. Koivuluoto, L. Lusvarghi, C. Lyphout, N. Markocsan, V. Matikainen, P. Nylén, P. Sassatelli, R. Trache, and P. Vuoristo, Tribology of HVOF- and HVAF-Sprayed WC-10Co4Cr Hardmetal Coatings: A Comparative Assessment, Surf. Coat. Technol., 2015, 265, p 125-14410.1016/j.surfcoat.2015.01.048 ↗
17. L. Jacobs, M.M. Hyland, and M.D. Bonte, Study of the Influence of Microstructural Properties on the Sliding-Wear Behavior of HVOF and HVAF Sprayed WC-Cermet Coatings, J. Therm. Spray Technol., 1999, 8(1), p 125-13210.1361/105996399770350656 ↗
18. D.N. Tsipas, G.K. Triantafyllidis, J.K. Kiplagat, and P. Psillaki, Degradation Behaviour of Boronized Carbon and High Alloy Steels in Molten Aluminium and Zinc, Mater. Lett., 1998, 37(3), p 128-13110.1016/S0167-577X(98)00077-9 ↗
19. X. Liu, M. Wang, F. Yin, X. Ouyang, and Z. Li, Effects of Tungsten Addition on the Microstructure and Corrosion Resistance of Fe-3.5B Alloy in Liquid Zinc, Materials, 2017, 10(4), p 399-41310.3390/ma10040399 ↗
20. X. Ouyang, G. Chen, F. Yin, Y. Liu, and M. Zhao, Effect of Molybdenum on the Microstructures of As-Cast Fe-B Alloys and Their Corrosion Resistance in Molten Zinc, Corrosion, 2017, 73(8), p 942-95210.5006/2280 ↗
21. P. Ye, F. Yin, Y. Liu, X. Ouyang, and X. Xie, Corrosion Resistance of Liquid Zinc FeB/Co Cermet Coating Deposited by AC-HVAF, Chin. J. Nonferrous Met., 2018, 28(4), p 782-791 ((in chinese))
22. Y. Zhang, T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, and Z. Lu, Microstructures and Properties of High-Entropy Alloys, Prog. Mater. Sci., 2014, 61, p 1-9310.1016/j.pmatsci.2013.10.001 ↗
23. P. Li, A. Wang, and C.T. Liu, A Ductile High Entropy Alloy with Attractive Magnetic Properties, J. Alloys Compd., 2017, 694, p 55-6010.1016/j.jallcom.2016.09.186 ↗
24. M.H. Tsai and J.W. Yeh, High-Entropy Alloys: A Critical Review, Mater. Res. Lett., 2014, 2(3), p 107-12310.1080/21663831.2014.912690 ↗
25. D.B. Miracle and O.N. Senkov, A Critical Review of High Entropy Alloys (HEAs) and Related Concepts, Acta Mater., 2017, 122, p 448-51110.1016/j.actamat.2016.08.081 ↗
26. Y.F. Ye, Q. Wang, J. Lu, C.T. Liu, and Y. Yang, High-Entropy Alloy: Challenges and Prospects, Mater. Today, 2016, 19(6), p 349-36210.1016/j.mattod.2015.11.026 ↗
27. Z. Chen, W. Chen, B. Wu, X. Cao, L. Liu, and Z. Fu, Effects of Co and Ti on Microstructure and Mechanical Behavior of Al0.75FeNiCrCo High Entropy Alloy Prepared by Mechanical Alloying and Spark Plasma Sintering, Mater. Sci. Eng. A, 2015, 648, p 217-22410.1016/j.msea.2015.08.056 ↗
28. H. Ikeda, and K. Yanagimoto, Surface Coating Material for Molten Zinc Bath Member, Production Method Thereof, and Molten Zinc Bath Member, U.S. Patent 8927111, (2015)
29. H. Wang, T. Webb, and J.W. Bitler, Study of Thermal Expansion and Thermal Conductivity of Cemented WC-Co Composite, Int. J. Refract. Met. H, 2015, 49, p 170-17710.1016/j.ijrmhm.2014.06.009 ↗
30. S. Ma, J. Xing, H. Fu, Y. He, Y. Bai, Y. Li, and Y. Bai, Interface Characteristics and Corrosion Behaviour of Oriented Bulk Fe2B Alloy in Liquid Zinc, Corros. Sci., 2014, 78, p 71-8010.1016/j.corsci.2013.08.033 ↗
31. O. Allaoui, N. Bouaouadja, and G. Saindernan, Characterization of Boronized Layers on a XC38 Steel, Surf. Coat. Technol., 2006, 201(6), p 3475-348210.1016/j.surfcoat.2006.07.238 ↗
32. M. Jafari, M.H. Enayati, M. Salehi, S.M. Nahvi, and C.G. Park, Improvement in Tribological Properties of HVOF Sprayed WC-Co Coatings Using Electroless Ni-P Coated Feedstock Powders, Surf. Coat. Technol., 2013, 235, p 310-31710.1016/j.surfcoat.2013.07.059 ↗
33. L. Zhuang, Q. Fu, J. Zhang, Y. Guo, H. Li, and Y. Shan, Effect of Pre-oxidation Treatment on the Bonding Strength and Thermal Shock Resistance of SiC Coating for C/C-ZrC-SiC Composites, Ceram. Int., 2015, 41(5), p 6956-696410.1016/j.ceramint.2015.01.151 ↗
34. C. Fan, B. Zou, L. Zhu, W. Fan, X. Cai, Y. Wang, and X. Cao, Oxidation and Thermal Shock Resistant Properties of Si/Yb2SiO5/NdMgAl11O19 Coating Deposited on Cf/SiC Composites, Mater. Des., 2017, 116, p 261-26710.1016/j.matdes.2016.12.022 ↗
35. B.G. Seong, S.Y. Hwang, M.C. Kim, and K.Y. Kim, Reaction of WC-Co Coating with Molten Zinc in a Zinc Pot of a Continuous Galvanizing Line, Surf. Coat. Technol., 2001, 138(1), p 101-11010.1016/S0257-8972(00)01136-1 ↗
36. M. Jones, A.J. Horlock, P.H. Shipway, D.G. McCartney, and J.V. Wood, A Comparison of the Abrasive Wear Behaviour of HVOF Sprayed Titanium Carbide- and Titanium Boride-Based Cermet Coatings, Wear, 2001, 251(1–12), p 1009-101610.1016/S0043-1648(01)00702-5 ↗
37. X. Zhang, W. Chen, H. Luo, S. Li, T. Zhou, and L. Shi, Corrosion Resistance and Interfacial Morphologies of Novel Fe-Cr-Mo-B Cast Steels in Molten Aluminum, Corros. Sci., 2017, 125, p 20-2810.1016/j.corsci.2017.05.024 ↗
38. J. Zhang, C. Deng, J. Song, C. Deng, M. Liu, and K. Zhou, MoB-CoCr as Alternatives to WC-12Co for Stainless Steel Protective Coating and Its Corrosion Behavior in Molten Zinc, Surf. Coat. Technol., 2013, 235, p 811-81810.1016/j.surfcoat.2013.08.052 ↗
39. X. Liu, E. Barbero, J. Xu, M. Burris, K.M. Chang, and V. Sikka, Liquid Metal Corrosion of 316L, Fe3Al, and FeCrSi in Molten Zn-Al Baths, Metall. Mater. Trans. A, 2005, 36(8), p 2049-205810.1007/s11661-005-0325-7 ↗
40. S. Matthews and B. James, Review of Thermal Spray Coating Applications in the Steel Industry: Part 2-Zinc Pot Hardware in the Continuous Galvanizing Line, J. Therm. Spray Technol., 2010, 19(6), p 1277-128610.1007/s11666-010-9519-7 ↗