journal article·2022-01Open access

Investigation of Mechanical Properties of Twin Wire Arc Repair of Cast Iron Components

K. DePalma, M. Walluk, L. P. Martin, K. Sisak

Journal of Thermal Spray Technology· Volume 31· Issue 1-2

Abstract

Twin wire arc is a commonly used thermal spray technology for application of steel coatings to cast iron components. Hardness and adhesion strength are critical properties of such coatings, and significant research is available reporting these properties. However, the lamellar structure of the coatings and residual stresses induced during the coating process leads to significantly different behavior in bending applications than in purely tensile applications which are evaluated by the standard adhesion test. In addition, microstructural features that are controlled by certain process parameters during deposition of the coating can have a significant effect on these properties. This work relates the hardness, adhesion strength, and wear resistance to the coating microstructure and assesses the related bending strength and failure mode. Comparisons between bend tests and pull-off adhesion tests show significant differences to consider when designing a twin wire arc coating.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. I. Gedzevicius and A.V. Valiulis, Analysis of Wire Arc Spraying Process Variables on Coatings Properties, J. Mater. Process. Technol., 2006, 175(1–3), p 206–211. https://doi.org/10.1016/j.jmatprotec.2005.04.01910.1016/j.jmatprotec.2005.04.019 ↗
2. D. Poirier et al., Performance Assessment of Protective Thermal Spray Coatings for Lightweight Al Brake Rotor Disks, J. Therm. Spray Technol., 2019, 28, p 291–304.10.1007/s11666-018-0805-0 ↗
3. E.A. Esfahani, H. Salimijazi, M. Golozar, J. Mostaghimi and L. Pershin, Study of Corrosion Behavior of Arc Spraying Aluminum Coating on Mild Steel, J. Therm. Spray Technol., 2012, 21(6), p 1195–1202.10.1007/s11666-012-9810-x ↗
4. G. Burkle, H.J. Fecht, A. Sagel and C. Wanke, Dynamic mechanical analysis of the mechanical properties of Al- and Fe- based thermal spray coatings, Thermal Spray: New Surfaces for a New Millenium. C.C. Berndt, K.A. Khor, E.F. Lugscheider Ed., Ohio, ASM International, 2001, p 999–1002
5. J. Wang, J. Liu, L. Zhang, J. Sun and Z. Wang, Microstructure and Mechanical Properties of Twin-Wire Arc Sprayed Ni-Al Composite Coatings on 6061–T6 Aluminum Alloy Sheet, Int. J. Miner. Metall. Mater., 2014, 21(5), p 469–478.10.1007/s12613-014-0931-8 ↗
6. T.C. Chen, C.C. Chou, T.Y. Yung, K.C. Tsai and J.Y. Huang, Wear Behavior of Thermally Sprayed Zn/15Al, Al and Inconel 625 Coatings on Carbon Steel, Surf. Coatings Technol., 2016, 303, p 78–85. https://doi.org/10.1016/j.surfcoat.2016.03.09510.1016/j.surfcoat.2016.03.095 ↗
7. S. Sampath, X.Y. Jiang, J. Matejicek, L. Prchlik, A. Kulkarni and A. Vaidya, Role of Thermal Spray Processing Method on the Microstructure, Residual Stress and Properties of Coatings: An Integrated Study of Ni-5 wt. % Al Bond Coats, Mater. Sci. Eng. A, 2004, 364(1–2), p 216–231. https://doi.org/10.1016/j.msea.2003.08.02310.1016/j.msea.2003.08.023 ↗
8. G.M. Smith and S. Sampath, Sustainability of Metal Structures via Spray-Clad Remanufacturing, Jom, 2018, 70(4), p 512–520. https://doi.org/10.1007/s11837-017-2676-010.1007/s11837-017-2676-0 ↗
9. A. Purniawan, D. A. K. Hapsari, and H. Purwaningsih, Deposition and post heat treatment of ni-Al/Ni-20Cr on AISI 4140 using twin wire arc spray method. In: AIP Conference Proceedings (Vol. 2262, No. 1, p. 060008), https://doi.org/10.1063/5.0015688.10.1063/5.0015688 ↗
10. D.F. Fitriyana et al., The Effect of Compressed Air Pressure and Stand-off Distance on the Twin Wire Arc Spray (TWAS) Coating for Pump Impeller from AISI 304 Stainless Steel, NAC, 2019, 2020, p 119–130.
11. M.P. Planche, H. Lioa and C. Coddet, Relationships Between In-flight Particle Characteristics and Coating Microstructure with a Twin Wire Arc Spray Process and Different Working Conditions, Surf. Coatings Technol., 2004, 182, p 215–226.10.1016/S0257-8972(03)00873-9 ↗
12. G. Jandin, H. Liao, Z.Q. Feng and C. Coddet, Correlations Between Operating Conditions, Microstructure and Mechanical Properties of Twin Wire Arc Sprayed Steel Coatings, Mater. Sci. Eng. A, 2003, 349(1–2), p 298–305. https://doi.org/10.1016/S0921-5093(02)00767-010.1016/S0921-5093(02)00767-0 ↗
13. C. Leither, J. Risan, M. Bashirzadeh and F. Azarmi, Determination of the Elastic Modulus of Wire Arc Sprayed Alloy 625 using Experimental, Analytical, and Numerical Simulations, Surf. Coatings Technol., 2013, 235, p 611–619. https://doi.org/10.1016/j.surfcoat.2013.08.03310.1016/j.surfcoat.2013.08.033 ↗
14. E. Rodriguez, M.A. González, H.R. Monjardín, O. Jimenez, M. Flores and J. Ibarra, Heat Treated Twin Wire Arc Spray AISI 420 Coatings under Dry and Wet Abrasive Wear, Met. Mater. Int., 2017, 23(6), p 1121–1132. https://doi.org/10.1007/s12540-017-6398-110.1007/s12540-017-6398-1 ↗
15. F.N. Longo, Coating processing, Handbook of Thermal Spray Technology. J.R. Davis Ed., ASM International, Ohio, 2004
16. ASTM, “D-4541-17: Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers.” ASTM International, West Conshohocken, PA, pp. 1–16, 2017, doi: https://doi.org/10.1520/D4541-17.210.1520/D4541-17.2 ↗
17. ASTM, “E-2109-01 Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings,” vol. 01, no. Reapproved. ASTM International, West Conshohocken, PA, 2014, doi: https://doi.org/10.1520/E2109-01R14.210.1520/E2109-01R14.2 ↗
18. ASTM, “E-18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials.” ASTM International, West Conshohocken, PA, pp. 1–38, 2020, doi: https://doi.org/10.1520/E0018-14.210.1520/E0018-14.2 ↗
19. ASTM, “G-174-17: Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact,” vol. i, no. Reapproved. ASTM International, West Conshohocken, PA, pp. 1–7, 2017, doi: https://doi.org/10.1520/G0174-04R17.210.1520/G0174-04R17.2 ↗
20. A.P. Newbery and P.S. Grant, Oxidation during Electric Arc Spray Forming of Steel, J. Mater. Process. Technol., 2006, 178(1–3), p 259–269. https://doi.org/10.1016/j.jmatprotec.2006.03.17610.1016/j.jmatprotec.2006.03.176 ↗
21. S. Hoile, T. Rayment, P.S. Grant and A.D. Roche, Oxide Formation in the Sprayform Tool Process, Mater. Sci. Eng. A, 2004, 383(1), p 50–57. https://doi.org/10.1016/j.msea.2004.02.06810.1016/j.msea.2004.02.068 ↗
22. D. Stefanescu, Ed., “Mechanical Properties of Ductile Irons,” in ASM Handbook, Volume 1A, Cast Iron Science and Technology, vol. 15, no. c, ASM International, 2018, pp. 456–47110.31399/asm.hb.v01a.a0006345 ↗
23. J.H. You, T. Höschen and S. Lindig, Determination of Elastic Modulus and Residual Stress of Plasma-Sprayed Tungsten Coating on Steel Substrate, J. Nucl. Mater., 2006, 348(1–2), p 94–101. https://doi.org/10.1016/j.jnucmat.2005.09.01510.1016/j.jnucmat.2005.09.015 ↗
24. W. C. Young and R. G. Budynas, Roark’s Formulas for Stress and Strain. 1989
25. J. Rendón and M. Olsson, Abrasive Wear Resistance of some Commercial Abrasion Resistant Steels Evaluated by Laboratory Test Methods, Wear, 2009, 267(11), p 2055–2061. https://doi.org/10.1016/j.wear.2009.08.00510.1016/j.wear.2009.08.005 ↗
26. K. Cooke, G. Oliver, V. Buchanan and N. Palmer, Optimisation of the Electric Wire Arc-Spraying Process for Improved Wear Resistance of Sugar Mill Roller Shells, Surf. Coat. Technol., 2007, 202, p 185–188.10.1016/j.surfcoat.2007.05.015 ↗