High-Temperature Solid Lubricant Coating by Plasma Spraying Using Metal-Metal Clad Powders
Source abstract
Abstract
NiCr/Ag-Mo composite coating was fabricated by atmospheric plasma spray technology using clad powders as the feedstock. Its tribological properties at variable temperature were evaluated using a ball-on-disk high-temperature tribometer in air. The results showed that compared with NiCr, the NiCr/Ag-Mo composite coating exhibited better lubrication effect and higher wear resistance at all test temperatures, especially above 600 °C. At 800 °C, NiCr/Ag-Mo composite coating showed the lowest friction coefficient of about 0.2 and its corresponding wear rate reached 2.5 × 10−5 mm3/Nm. Characterizations of NiCr/Ag-Mo composite coating revealed that at temperatures below 400 °C, Ag was smeared and spread onto the wear surface, reducing the friction and wear. At temperature above 500 °C, the Ag2MoO4 lubrication film formed by tribo-oxidation significantly improved the coating’s lubrication effect and wear resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. C. Donnet and A. Erdemir, Historical Developments and New Trends in Tribological and Solid Lubricant Coatings, Surf. Coat. Technol., 2004, 180, p 76-8410.1016/j.surfcoat.2003.10.022 ↗
2. C.C. Baker, R.R. Chromik, K.J. Wahl, J.J. Hu, and A.A. Voevodin, Preparation of Chameleon Coatings for Space and Ambient Environments, Thin Solid Films, 2007, 515, p 6737-674310.1016/j.tsf.2007.02.005 ↗
3. A.A. Voevodin and J.S. Zabinski, Nanocomposite and Nanostructured Tribological Materials for Space Applications, Compos. Sci. Technol., 2005, 65, p 741-748
4. T.W. Scharf, P.G. Kotula, and S.V. Prasad, Friction and Wear Mechanisms in MoS2/Sb2O3/Au Nanocomposite Coatings, Acta Mater., 2010, 58, p 4100-410910.1016/j.actamat.2010.03.040 ↗
5. H. Mohseni and T.W. Scharf, Atomic Layer Deposition of ZnO/Al2O3/ZrO2 Nanolaminates for Improved Thermal and Wear Resistance in Carbon–Carbon Composites, J. Vac. Sci. Technol. A, 2012, 30, p 01A14910.1116/1.3669518 ↗
6. H. Gao, D.S. Stone, H. Mohseni, S.M. Aouadi, T.W. Scharf, and A. Martini, Mechanistic Studies of High Temperature Friction Reduction in Silver Tantalate, Appl. Phys. Lett., 2013, 102, p 12160310.1063/1.4798555 ↗
7. T.W. Scharf and S.V. Prasad, Solid Lubricants: A Review, J. Mater. Sci., 2013, 48, p 511-53110.1007/s10853-012-7038-2 ↗
8. D.S. Xiong, C.Q. Peng, and J.L. Liu, Effects of MoS2 on Mechanical and Tribological Properties of NiCr-Based Alloys, Trans. Nonferrous Met. Soc. China, 2000, 10, p 328-331
9. H.E. Sliney, Solid Lubricant Material for High-Temperatures: A Review, Tribol. Int., 1982, 15, p 303-31510.1016/0301-679X(82)90089-5 ↗
10. C. Dellacorte and H.E. Sliney, Composition Optimization of Self-Lubricating Chromium-Carbide-Based Composite Coatings for Use to 760 °C, Asle Trans., 1987, 30, p 77-8310.1080/05698198708981733 ↗
11. J. Ouyang, X. Liang, Z. Liu, Z. Yang, and Y. Wang, Friction and Wear Properties of Hot-Pressed NiCr–BaCr2O4 High Temperature Self-Lubricating Composites, Wear, 2013, 301, p 820-82710.1016/j.wear.2013.02.004 ↗
12. C. Huang, L. Du, and W. Zhang, Preparation and Characterization of Atmospheric Plasma-Sprayed NiCr/Cr3C2–BaF2·CaF2 Composite Coating, Surf. Coat. Technol., 2009, 203, p 3058-306510.1016/j.surfcoat.2009.03.027 ↗
13. H.E. Sliney, T.N. Strom, and G.P. Allen, Flourid Solid Lubricants for Extreme Temperatures and Corrosive environments, AsleTrans., 1965, 8, p 307
14. J. Li, D. Xiong, Z. Huang, J. Kong, and J. Dai, Effect of Ag and CeO2 on Friction and Wear Properties of Ni-Base Composite at High Temperature, Wear, 2009, 267, p 576-58410.1016/j.wear.2008.12.050 ↗
15. E. Liu, Y. Gao, J. Jia, and Y. Bai, Friction and Wear Behaviors of Ni-Based Composites Containing Graphite/Ag2MoO4 Lubricants, Tribol. Lett., 2013, 50, p 313-32210.1007/s11249-013-0131-0 ↗
16. L. Du, W. Zhang, W. Zhang, T. Zhang, H. Lan, and C. Huang, Tribological and Oxidation Behaviors of the Plasma Sprayed NiCoCrAlY–Cr2O3–AgVO3 Coating, Surf. Coat. Technol., 2016, 298, p 7-1410.1016/j.surfcoat.2016.04.042 ↗
17. M.R. Hilton and P.D. Fleischauer, Applications of Solid Lubricant Films in Spacecraft, Surf. Coat. Technol., 1992, 55, p 435-44110.1016/S0257-8972(07)80062-4 ↗
18. J.J. Hu, C. Muratore, and A.A. Voevodin, Silver Diffusion and High-Temperature Lubrication Mechanisms of YSZ–Ag–Mo Based Nanocomposite Coatings, Compos. Sci. Technol., 2007, 67, p 336-34710.1016/j.compscitech.2006.09.008 ↗
19. J. Chen, Y. An, J. Yang, X. Zhao, F. Yan, H. Zhou, and J. Chen, Tribological Properties of Adaptive NiCrAlY–Ag–Mo Coatings Prepared by Atmospheric Plasma Spraying, Surf. Coat. Technol., 2013, 235, p 521-52810.1016/j.surfcoat.2013.08.012 ↗
20. J. Chen, X. Zhao, H. Zhou, J. Chen, Y. An, and F. Yan, HVOF-Sprayed Adaptive Low Friction NiMoAl–Ag Coating for Tribological Application from 20 to 800 °C, Tribol. Lett., 2014, 56, p 55-6610.1007/s11249-014-0382-4 ↗
21. V.V. Sobolev and J.M. Guilemany, Effect of Oxidation on Droplet Flattening and Splat-Substrate Interaction in Thermal Spraying, J. Therm. Spray Technol., 1999, 8, p 523-53010.1361/105996399770350205 ↗
22. C. Huang, L. Du, and W. Zhang, Friction and Wear Characteristics of Plasma-Sprayed Self-Lubrication Coating with Clad Powder at Elevated Temperatures up to 800 °C, J. Therm. Spray Technol., 2014, 23, p 463-46910.1007/s11666-013-9996-6 ↗
23. C. Huang, L. Du, and W. Zhang, Effects of Solid Lubricant Content on the Microstructure and Properties of NiCr/Cr3C2–BaF2·CaF2 Composite Coatings, J. Alloys Compd., 2009, 479, p 777-78410.1016/j.jallcom.2009.01.062 ↗
24. J.J. Lu, Q.J. Xue, and G.W. Zhang, Effect of Silver on the Sliding Friction and Wear Behavior of CeF3 Compact at Elevated Temperatures, Wear, 1998, 214, p 107-11110.1016/S0043-1648(97)00195-6 ↗
25. T. Zhang, C. Huang, H. Lan, L. Du, and W. Zhang, Tribological Properties and Lubrication Mechanisms of a Ag–Mo Composite, Lubr. Sci., 2016, 28, p 141-15610.1002/ls.1306 ↗