journal article·2020-08

Residual Stress Generation in Laser-Assisted Cold Spray Deposition of Oxide Dispersion Strengthened Fe91Ni8Zr1

Dallin J. Barton, Venkata Satish Bhattiprolu, Billy Chad Hornbuckle, Clio M. Batali, Kristopher A. Darling, Gregory B. Thompson, Luke N. Brewer

Publisher page

Abstract

This paper examines the residual stresses generated by laser-assisted cold spray deposition of an iron-based oxide dispersion strengthened alloy (Fe91Ni8Zr1 at.%) on an AISI 1018 mild steel substrate, as well as studies of the effect of the laser heating on the substrate alone. The in-plane residual stress values were determined by X-ray diffraction-based measurements. In the top section of the layers, established at a raster deposition rate of 25 mm/s and simultaneous surface heating temperatures of 650 and 950 °C, stresses were compressive ranging from − 170 to − 440 MPa. For the substrate only study, a larger span of surface temperatures from 350 to 950 °C and scan rates of 5 and 25 mm/s were investigated. Here, the stresses in the laser tracks were tensile, of the order of + 400 MPa, with both “W''- and “M”- shaped profiles about the laser centerline. It was found that the stress profile shape was influenced by the Gaussian power distribution across the laser spot diameter which correlated with microstructural changes (martensite formation) in the substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. A.P. Alkhimov, A.N. Papyrin, V.F. Kosarev, N.I. Nesterovich, M.M. Shushpanov, Gas-Dynamics Spraying Method for Applying a Coating, ed., Papyrin, Anatoly Nikiforovich, 1994
2. R.N. Raoelison, C. Verdy, and H. Liao, Cold Gas Dynamic Spray Additive Manufacturing Today: Deposit Possibilities, Technological Solutions and Viable Applications, Mater. Des., 2017, 133, p 266-28710.1016/j.matdes.2017.07.067 ↗
3. V. Champagne and D. Helfritch, The Unique Abilities of Cold Spray Deposition, Int. Mater. Rev., 2016, 61(7), p 437-45510.1080/09506608.2016.1194948 ↗
4. A.I. Katsamas and G.N. Haidemenopoulos, Laser-Beam Carburizing of Low-Alloy Steels, Surf. Coat. Technol., 2001, 139(2–3), p 183-19110.1016/S0257-8972(00)01061-6 ↗
5. M. Bray, A. Cockburn, and W. O’Neill, The Laser-Assisted Cold Spray Process and Deposit Characterisation, Surf. Coat. Technol., 2009, 203(19), p 2851-285710.1016/j.surfcoat.2009.02.135 ↗
6. R. Lupoi, A. Cockburn, C. Bryan, M. Sparkes, F. Luo, and W. O’Neill, Hardfacing steel with nanostructured coatings of Stellite-6 by supersonic laser deposition, Light Sci. Appl., 2012, 1(5), p 1-610.1038/lsa.2012.10 ↗
7. B. Li, Y. Jin, J. Yao, Z. Li, and Q. Zhang, Solid-state fabrication of WCp-reinforced Stellite-6 composite coatings with supersonic laser deposition, Surf. Coat. Technol., 2017, 321, p 386-39610.1016/j.surfcoat.2017.04.062 ↗
8. E.O. Olakanmi, M. Tlotleng, C. Meacock, S. Pityana, and M. Doyoyo, Deposition Mechanism and Microstructure of Laser-Assisted Cold-Sprayed (LACS) Al-12 wt% Si Coatings: Effects of Laser Power, JOM, 2013, 65(6), p 776-78310.1007/s11837-013-0611-6 ↗
9. D.K. Christoulis, M. Jeandin, E. Irissou, J.-G. Legoux, W. Knapp, Laser-Assisted Cold Spray (LACS), Nd YAG Laser, 1 ed., I. Open, Ed., 2012, pp. 59-9610.5772/36104 ↗
10. J. Yao, L. Yang, B. Li, and Z. Li, Beneficial Effects of Laser Irradiation on the Deposition Process of Diamond/Ni60 Composite Coating with Cold Spray, Appl. Surf. Sci., 2015, 330, p 300-30810.1016/j.apsusc.2015.01.029 ↗
11. J. Morimoto, T. Onoda, Y. Sasaki, and N. Abe, Improvement of Solid Cold Sprayed TiO2–Zn Coating with Direct Diode Laser, Vacuum, 2004, 73(3–4), p 527-53210.1016/j.vacuum.2003.12.157 ↗
12. M. Kulmala and P. Vuoristo, Influence of Process Conditions in Laser-Assisted Low-Pressure Cold Spraying, Surf. Coat. Technol., 2008, 202(18), p 4503-450810.1016/j.surfcoat.2008.04.034 ↗
13. W.A. Story, D.J. Barton, B.C. Hornbuckle, K.A. Darling, G.B. Thompson, and L.N. Brewer, Laser Assisted Cold Spray of Fe–Ni–Zr Oxide Dispersion Strengthened Steel, Materialia, 2018, 3, p 239-24210.1016/j.mtla.2018.08.028 ↗
14. M.J. Alinger, G.R. Odette, and G.E. Lucas, Tensile and Fracture Toughness Properties of MA957: Implications to the Development of Nanocomposited Ferritic Alloys, J. Nucl. Mater., 2002, 307–311, p 484-48910.1016/S0022-3115(02)01220-5 ↗
15. L. Straßberger, A. Chauhan, T. Gräning, S. Czink, and J. Aktaa, High-Temperature Low-Cycle Fatigue Behavior of Novel Austenitic ODS Steels, Int. J. Fatigue, 2016, 93, p 194-20010.1016/j.ijfatigue.2016.08.018 ↗
16. M.C. Brandes, L. Kovarik, M.K. Miller, G.S. Daehn, and M.J. Mills, Creep Behavior and Deformation Mechanisms in a Nanocluster Strengthened Ferritic Steel, Acta Mater., 2012, 60(4), p 1827-183910.1016/j.actamat.2011.11.057 ↗
17. S. Rogozhkin, A. Bogachev, O. Korchuganova, A. Nikitin, N. Orlov, A. Aleev, A. Zaluzhnyi, M. Kozodaev, T. Kulevoy, B. Chalykh, R. Lindau, J. Hoffmann, A. Möslang, P. Vladimirov, M. Klimenkov, M. Heilmaier, J. Wagner, and S. Seils, Nanostructure Evolution in ODS steels Under Ion Irradiation, Nucl. Mater. Energy, 2016, 9, p 66-7410.1016/j.nme.2016.06.011 ↗
18. R. Schäublin, A. Ramar, N. Baluc, V. de Castro, M.A. Monge, T. Leguey, N. Schmid, and C. Bonjour, Microstructural Development Under Irradiation in European ODS Ferritic/Martensitic Steels, J. Nucl. Mater., 2006, 351(1–3), p 247-26010.1016/j.jnucmat.2006.02.005 ↗
19. C.H. Zhang, Y.T. Yang, Y. Song, J. Chen, L.Q. Zhang, J. Jang, and A. Kimura, Irradiation Response of ODS Ferritic Steels to High-Energy Ne ions at HIRFL, J. Nucl. Mater., 2014, 455(1–3), p 61-6710.1016/j.jnucmat.2014.04.015 ↗
20. D.J. Barton, C. Kale, B.C. Hornbuckle, K.A. Darling, K.N. Solanki, and G.B. Thompson, Microstructure and Dynamic Strain Aging Behavior in Oxide Dispersion Strengthened 91Fe-8Ni-1Zr (at%) Alloy, Mater. Sci. Eng. A, 2018, 725, p 503-50910.1016/j.msea.2018.04.016 ↗
21. P. Unifantowicz, Z. Oksiuta, P. Olier, Y. de Carlan, and N. Baluc, Microstructure and Mechanical Properties of an ODS RAF Steel Fabricated by Hot Extrusion or Hot Isostatic Pressing, Fusion Eng. Des., 2011, 86(9–11), p 2413-241610.1016/j.fusengdes.2011.01.022 ↗
22. K.A. Darling, M.A. Tschopp, R.K. Guduru, W.H. Yin, Q. Wei, and L.J. Kecskes, Microstructure and Mechanical Properties of Bulk Nanostructured Cu–Ta Alloys Consolidated by Equal Channel Angular Extrusion, Acta Mater., 2014, 76, p 168-18510.1016/j.actamat.2014.04.074 ↗
23. L.N. Brewer, M.S. Bennett, B.W. Baker, E.A. Payzant, and L.M. Sochalski-Kolbus, Characterization of Residual Stress as a Function of Friction Stir Welding Parameters in Oxide Dispersion Strengthened (ODS) Steel MA956, Mater. Sci. Eng. A, 2015, 647, p 313-32110.1016/j.msea.2015.09.020 ↗
24. B.W. Baker, E.S.K. Menon, T.R. McNelley, L.N. Brewer, B. El-Dasher, J.C. Farmer, S.G. Torres, M.W. Mahoney, and S. Sanderson, Processing-Microstructure Relationships in Friction Stir Welding of MA956 Oxide Dispersion Strengthened Steel, Metall. Mater. Trans. E, 2014, 1(4), p 318-330
25. B.W. Baker, T.R. McNelley, and L.N. Brewer, Grain Size and Particle Dispersion Effects on the Tensile Behavior of Friction Stir Welded MA956 Oxide Dispersion Strengthened Steel from Low to Elevated Temperatures, Mater. Sci. Eng. A, 2014, 589, p 217-22710.1016/j.msea.2013.09.092 ↗
26. B. Maier, M. Lenling, H. Yeom, G. Johnson, S. Maloy, and K. Sridharan, A Novel Approach for Manufacturing Oxide Dispersion Strengthened (ODS) Steel Cladding Tubes Using Cold Spray Technology, Nucl. Eng. Technol., 2019, 51, p 1069-107410.1016/j.net.2019.01.015 ↗
27. B. Marzbanrad, H. Jahed, and E. Toyserkani, On the Evolution of Substrate’s Residual Stress During Cold Spray Process: A Parametric Study, Mater. Des., 2018, 138, p 90-10210.1016/j.matdes.2017.10.062 ↗
28. V. Luzin, K. Spencer, and M.X. Zhang, Residual Stress and Thermo-Mechanical Properties of Cold Spray Metal Coatings, Acta Mater., 2011, 59(3), p 1259-127010.1016/j.actamat.2010.10.058 ↗
29. M. Saleh, V. Luzin, and K. Spencer, Analysis of the Residual Stress and Bonding Mechanism in the Cold Spray Technique Using Experimental and Numerical Methods, Surf. Coat. Technol., 2014, 252, p 15-2810.1016/j.surfcoat.2014.04.059 ↗
30. T. Suhonen, T. Varis, S. Dosta, M. Torrell, and J.M. Guilemany, Residual Stress Development in Cold Sprayed Al, Cu and Ti Coatings, Acta Mater., 2013, 61(17), p 6329-633710.1016/j.actamat.2013.06.033 ↗
31. S. Rech, A. Trentin, S. Vezzù, J.-G. Legoux, E. Irissou, and M. Guagliano, Influence of Pre-Heated Al 6061 Substrate Temperature on the Residual Stresses of Multipass Al Coatings Deposited by Cold Spray, J. Therm. Spray Technol., 2010, 20(1–2), p 243-251
32. F. Tölle, A. Gumenyuk, A. Backhaus, S. Olschok, M. Rethmeier, and U. Reisgen, Welding Residual Stress Reduction by Scanning of a Defocused Beam, J. Mater. Process. Technol., 2012, 212(1), p 19-2610.1016/j.jmatprotec.2011.07.019 ↗
33. S. Ghosh, J. Choi, 3-Dimensional Transient Residual Stress Finite Element Analysis for Laser Aided Direct Metal Deposition Process, in International Congress on Applications of Lasers & Electro-Opticsed., Unlisted, Ed., Laser Institute of America, 2003, p 1–1210.2351/1.5060091 ↗
34. J.H. Yao, L.J. Yang, B. Li, Q.L. Zhang, and Z.H. Li, Depoisition Characteristics and Microstructure of a Ni60-Ni Composite Coating Produced by Supersonic Laser Deposition, Lasers Eng., 2017, 36, p 117-131
35. H. Kotan, K.A. Darling, M. Saber, R.O. Scattergood, and C.C. Koch, An In Situ Experimental Study of Grain Growth in a Nanocrystalline Fe91Ni8Zr1 Alloy, J. Mater. Sci., 2012, 48(5), p 2251-225710.1007/s10853-012-7002-1 ↗
36. K.A. Darling, B.K. VanLeeuwen, J.E. Semones, C.C. Koch, R.O. Scattergood, L.J. Kecskes, and S.N. Mathaudhu, Stabilized Nanocrystalline Iron-Based Alloys: Guiding Efforts in Alloy Selection, Mater. Sci. Eng. A, 2011, 528(13–14), p 4365-437110.1016/j.msea.2011.02.080 ↗
37. W.A. Story, Processing-microstructure-property relations in high pressure cold spray deposition of AA2024 and AA7075, The University of Alabama, 2018
38. C.E. Murray, I.C. Noyan, Applied and Residual Stress Determination Using X-ray Diffraction, Practical Residual Stress Measurement Methods, 1 ed., G.S. Schaier, Ed., (Wiley, New York, 2013)10.1002/9781118402832.ch6 ↗
39. H. Kotan, K.A. Darling, M. Saber, C.C. Koch, and R.O. Scattergood, Effect of Zirconium on Grain Growth and Mechanical Properties of a Ball-Milled Nanocrystalline FeNi Alloy, J. Alloy. Compd., 2013, 551, p 621-62910.1016/j.jallcom.2012.10.179 ↗
40. E. Liverani, A.H.A. Lutey, A. Ascari, A. Fortunato, and L. Tomesani, A Complete Residual Stress Model for Laser Surface Hardening of Complex Medium Carbon Steel Components, Surf. Coat. Technol., 2016, 302, p 100-10610.1016/j.surfcoat.2016.05.066 ↗
41. S. Mates, M. Stoudt, and S. Gangireddy, Measuring The Influence of Pearlite Dissolution on the Transient Dynamic Strength of Rapidly-Heated Plain Carbon Steels, JOM (1989), 2016, 68(7), p 1832-183810.1007/s11837-016-1951-9 ↗
42. S. Denis, P. Archambault, C. Aubry, A. Mey, J.C. Jouin, and A. Simon, Modelling Of Phase Transformation Kinetics in Steels and Coupling with Heat Treatment Residual Stress Predictions, J. Phys. IV, 1999, 9(PR9), p 323-332
43. J. Sakkiettibutra and E.N. Kamau, Influence of Austenitisation and Transformation Hardening on the Residual Stress Development of Laser Beam Treated Components made of 20MnCr5, Materialwiss. Werkstofftech., 2012, 43(1–2), p 171-17710.1002/mawe.201100906 ↗
44. N.S. Bailey, W. Tan, and Y.C. Shin, Predictive Modeling and Experimental Results for Residual Stresses in Laser Hardening of AISI, 4140 Steel by a High Power Diode Laser, Surf. Coat. Technol., 2009, 203(14), p 2003-201210.1016/j.surfcoat.2009.01.039 ↗
45. W. Li, K. Yang, D. Zhang, and X. Zhou, Residual Stress Analysis of Cold-Sprayed Copper Coatings by Numerical Simulation, J. Therm. Spray Technol., 2015, 25(1–2), p 131-142
46. A.S. Franchim, V.S. Campos, D.N. Travessa, and C.M. Neto, Analytical Modelling for Residual Stresses Produced by Shot Peening, Mater. Des., 2009, 30(5), p 1556-156010.1016/j.matdes.2008.07.040 ↗