Enhancement of Mechanical Properties and Corrosion Resistance of HVOF-Sprayed NiCrBSi Coatings Through Mechanical Attrition Treatment (SMAT)
Source abstract
Abstract
This study aims at evaluating the effects of surface mechanical attrition treatment (SMAT) on mechanical properties and corrosion resistance of NiCrBSi coatings deposited by high-velocity oxygen-fuel (HVOF) spraying. The as-deposited coating has a typical HVOF-sprayed morphology with unmelted and deformed particles, associated with voids and porosities, whereas after SMAT, the affected zone morphology is more compact, without porosity or crack. The thickness of the affected zone varies from about 30 to 100 µm according to the SMAT parameters. The surface roughness is much lower for SMAT-treated coatings (from Ra = 6.8 µm to a Ra ≈ 2.3 µm). Whatever the SMAT parameters used in this work, the treated materials are harder compared to the as-deposited coating (from 6.6 to 7.6 GPa). They exhibit compressive residual stresses around − 360 MPa, while tensile stresses with an average value of 180 MPa were evaluated for the as-deposited coating. In addition, the treated coatings show better wear resistance as well as better corrosion resistance in a 3 wt.% NaCl solution. The better compromise in terms of SMAT parameters corresponds to amplitude of vibration of the SMAT sonotrode of 15 μm and SMAT duration of 810 s.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. M.M.M. Shabana, K.N.S. Sarcar, and S. Suman, Kamaluddin, Tribological and Corrosion Behavior of HVOF Sprayed WC-Co, NiCrBSi and Cr3C2-NiCr Coatings and Analysis Using Design of Experiments, Mater. Today Proc., 2015, 2, p 2654-266510.1016/j.matpr.2015.07.227 ↗
2. T.S. Sidhu, S. Prakash, and R.D. Agrawal, A Comparative Study of Hot Corrosion Resistance of HVOF Sprayed NiCrBSi and Stellite-6 Coated Ni-Based Superalloy at 900 °C, Mater. Sci. Eng. A, 2007, 445–446, p 210-21810.1016/j.msea.2006.09.015 ↗
3. W.M. Zhao, Y. Wang, L.X. Dong, K.Y. Wu, and J. Xue, Corrosion Mechanism of NiCrBSi Coatings Deposited by HVOF, Surf. Coat. Technol., 2005, 190, p 293-29810.1016/j.surfcoat.2004.04.057 ↗
4. W. Żórawski and S. Jan Skrzypek, Tribological Properties of Plasma and HVOF-Sprayed NiCrBSi-Fe2O3 Composite Coatings, Surf. Coat. Technol., 2013, 220, p 282-28910.1016/j.surfcoat.2012.09.057 ↗
5. N. Serres, F. Hlawka, S. Costil, C. Langlade, F. Machi, and A. Cornet, Dry Coatings and Ecodesign Part. 1—Environmental Performances and Chemical Properties, Surf. Coat. Technol., 2009, 204, p 187-19610.1016/j.surfcoat.2009.07.012 ↗
6. J.K. Xiao, Y.Q. Wu, W. Zhang, J. Chen, X.L. Wei, and C. Zhang, Microstructure, Wear and Corrosion Behaviors of Plasma Sprayed NiCrBSi-Zr Coating, Surf. Coat. Technol., 2019, 360, p 172-18010.1016/j.surfcoat.2018.12.114 ↗
7. G. Jie Li, J. Li, and X. Luo, Effects of High Temperature Treatment on Microstructure and Mechanical Properties of Laser-Clad NiCrBSi/WC Coatings on Titanium Alloy Substrate, Mater. Charact., 2014, 98, p 83-9210.1016/j.matchar.2014.10.003 ↗
8. Z.-Q. Zhang, H.D. Wang, B.-S. Xu, and G.-S. Zhang, Investigation on Influence of WC–Ni Addition on Rolling contact Fatigue Behavior of Plasma Sprayed Ni-Based Alloy Coating, Tribol. Int., 2015, 90, p 509-51810.1016/j.triboint.2015.05.021 ↗
9. N. Serres, F. Hlawka, S. Costil, C. Langlade, and F. Machic, Microstructures and Mechanical Properties of Metallic NiCrBSi and Composite NiCrBSi–WC Layers Manufactured Via Hybrid Plasma/Laser Process, Appl. Surf. Sci., 2011, 257, p 5132-513710.1016/j.apsusc.2010.11.062 ↗
10. S. Zhou, J. Lei, X. Dai, J. Guo, Z. Gu, and H. Pan, A Comparative Study of the Structure and Wear Resistance of NiCrBSi/50 wt.% WC Composite Coatings by Laser Cladding and Laser Induction Hybrid Cladding, Int. J. Refract. Met. Hard Mater, 2016, 60, p 17-2710.1016/j.ijrmhm.2016.06.019 ↗
11. A.C. Karaoglanli, M. Oge, K.M. Doleker, and M. Hotamis, Comparison of Tribological Properties of HVOF Sprayed Coatings with Different Composition, Surf. Coat. Technol., 2017, 318, p 299-30810.1016/j.surfcoat.2017.02.021 ↗
12. E. Sadeghimeresht, N. Markocsan, P. Nylén, and S. Björklund, Corrosion Performance of Bi-Layer Ni/Cr2C3-NiCr HVAF Thermal Spraycoating, Appl. Surf. Sci., 2016, 369, p 470-48110.1016/j.apsusc.2016.02.002 ↗
13. Z. Bergant, U. Trdan, and J. Grum, Effect of High-Temperature Furnace Treatment on the Microstructure and Corrosion Behavior of NiCrBSi Flame-Sprayed Coatings, Corros. Sci., 2014, 88, p 372-38610.1016/j.corsci.2014.07.057 ↗
14. E. Sadeghimeresht, N. Markocsan, and P. Nylén, Microstructural Characteristics and Corrosion Behavior of HVAF- and HVOF-Sprayed Fe-Based Coatings, Surf. Coat. Technol., 2017, 318, p 365-37310.1016/j.surfcoat.2016.11.088 ↗
15. C. Navas, R. Vijande, J.M. Cuetos, M.R. Fernández, and J. de Damborene, Corrosion Behavior of NiCrBSi Plasma-Sprayed Coatings Partially Melted with Laser, Surf. Coat. Technol., 2006, 201, p 776-78510.1016/j.surfcoat.2005.12.032 ↗
16. N. Serres, F. Hlawka, S. Costil, C. Langlade, and F. Machi, Corrosion Properties of In Situ Laser Remelted NiCrBSi Coatings Comparison with Hard Chromium Coatings, J. Mater. Process. Technol., 2011, 211, p 133-14010.1016/j.jmatprotec.2010.09.005 ↗
17. J. Lin, Z. Wang, P. Lin, J. Cheng, X. Zhang, and S. Hong, Effects of Post Annealing on the Microstructure, Mechanical Properties and Cavitation Erosion Behavior of Arc-Sprayed FeNiCrBSiNbW Coatings, Mater. Des., 2015, 65, p 1035-104010.1016/j.matdes.2014.10.066 ↗
18. L. Liu, H. Xua, J. Xiao, X. Wei, G. Zhang, and C. Zhanga, Effect of Heat Treatment on Structure and Property Evolutions of Atmospheric Plasma Sprayed NiCrBSi Coatings, Surf. Coat. Technol., 2017, 325, p 548-55410.1016/j.surfcoat.2017.07.011 ↗
19. J. Liu, R. Bolot, S. Costil, and M.P. Planche, Transient Thermal and Mechanical Analysis of NiCrBSi Coatings Manufactured by Hybrid Plasma Spray Process with In-Situ Laser Remelting, Surf. Coat. Technol., 2016, 292, p 132-14310.1016/j.surfcoat.2016.03.031 ↗
20. N. Serres, F. Hlawka, S. Costil, C. Langlade, and F. Machi, An Investigation of the Mechanical Properties and Wear Resistance of NiCrBSi Coatings Carried Out by In Situ Laser Remelting, Wear, 2011, 270, p 640-64910.1016/j.wear.2011.01.025 ↗
21. X.H. Chen, J. Lu, L. Lu, and K. Lu, Tensile Properties of a Nanocrystalline 316L Austenitic Stainless Steel, Scr. Mater., 2005, 52, p 1039-104410.1016/j.scriptamat.2005.01.023 ↗
22. T. Roland, D. Retraint, K. Lu, and J. Lu, Enhanced Mechanical Behavior of a Nanocrystallised Stainless Steel and Its Thermal Stability, Mater. Sci. Eng. A, 2007, 445–446, p 281-28810.1016/j.msea.2006.09.041 ↗
23. Y. Liu, B. Jin, and J. Lu, Mechanical Properties and Thermal Stability of Nanocrystallized Pure Aluminum Produced by Surface Mechanical Attrition Treatment, Mater. Sci. Eng. A, 2015, 636, p 446-45110.1016/j.msea.2015.03.068 ↗
24. V. Pandey, G.S. Rao, K. Chattopadhyay, N.C. Santhi Srinivas, and V. Singh, Effect of Surface Nanostructuring on LCF Behavior of Aluminum Alloy, Mater. Sci. Eng. A, 2014, 647(2015), p 201-211
25. J. Zhou, Z. Sun, P. Kanouté, and D. Retraint, Effect of Surface Mechanical Attrition Treatment on Low Cycle Fatigue Properties of an Austenitic Stainless Steel, Int. J. Fatigue, 2017, 103, p 309-31710.1016/j.ijfatigue.2017.06.011 ↗
26. J. Zhou, D. Retraint, Z. Sun, and P. Kanouté, Comparative Study of the Effects of Surface Mechanical Attrition Treatment and Conventional Shot Peening on Low Cycle Fatigue of a 316L Stainless Steel, Surf. Coat. Technol., 2018, 349, p 556-56610.1016/j.surfcoat.2018.06.041 ↗
27. S. Benafia, D. Retraint, S. Yapi Brou, B. Panicaud, and J.L. Grosseau Poussard, Influence of Surface Mechanical Attrition Treatment on the Oxidation Behavior of 316L Stainless Steel, Corros. Sci., 2018, 136, p 188-20010.1016/j.corsci.2018.03.007 ↗
28. T. Balusamy, S. Kumar, and T.S.N. Sankara Narayanan, Effect of Surface Nanocrystallization on the Corrosion Behavior of AISI, 409 Stainless Steel, Corros. Sci., 2010, 52, p 3826-383410.1016/j.corsci.2010.07.004 ↗
29. D.V. Tchana Nkonta, F. Simescu-Lazar, R. Drevet, O. Aaboubi, J. Fauré, D. Retraint, and H. Benhayoune, Influence of the Surface Mechanical Attrition Treatment (SMAT) on the Corrosion Behavior of Co28Cr6Mo Alloy in Ringer’s Solution, J. Solid State Electrochem., 2018, 22, p 1091-109810.1007/s10008-017-3851-5 ↗
30. S. Jelliti, C. Richard, D. Retraint, T. Roland, M. Chemkhi, and C. Demangel, Effect of Surface Nanocrystallization on the Corrosion Behavior of Ti-6Al-4V Titanium Alloy, Surf. Coat. Technol., 2013, 224, p 82-8710.1016/j.surfcoat.2013.02.052 ↗
31. T. Roland, D. Retraint, K. Lu, and J. Lu, Fatigue Life Improvement Through Surface Nanostructuring of Stainless Steel by Means of Surface Mechanical Attrition Treatment, Scr. Mater., 2006, 54, p 1949-195410.1016/j.scriptamat.2006.01.049 ↗
32. M. Chemkhi, D. Retraint, A. Roos, C. Garnier, L. Waltz, C. Demangel, and G. Proust, The Effect of Surface Mechanical Attrition Treatment on Low Temperature Plasma Nitriding of an Austenitic Stainless Steel, Surf. Coat. Technol., 2013, 221, p 191-19510.1016/j.surfcoat.2013.01.047 ↗
33. M.T. Tsai, J.C. Huang, W.Y. Tsai, T.H. Chou, C.-F. Chen, T.H. Li, and J.S.C. Jang, Effects of Ultrasonic Surface Mechanical Attrition Treatment on Microstructures and Mechanical Properties of High Entropy Alloys, Intermetallics, 2018, 93, p 113-12110.1016/j.intermet.2017.11.018 ↗
34. N. Li, Y.D. Li, Y.X. Li, Y.H. Wu, Y.F. Zheng, and Y. Han, Effect of Surface Mechanical Attrition Treatment on Biodegradable Mg-1Ca Alloy, Mater. Sci. Eng. C, 2014, 35, p 314-32110.1016/j.msec.2013.11.010 ↗
35. Q. Luo and A.H. Jones, High-Precision Determination of Residual Stress of Polycrystalline Coatings Using Optimised XRD-sin2ψ Technique, Surf. Coat. Technol., 2010, 205, p 1403-140810.1016/j.surfcoat.2010.07.108 ↗
36. U. Selvadurai, P. Hollingsworth, I. Baumann, B. Hussong, W. Tillmann, S. Rausch, and D. Biermann, Influence of the Handling Parameters on Residual Stresses of HVOF-Sprayed WC-12Co Coatings, Surf. Coat. Technol., 2015, 268, p 30-3510.1016/j.surfcoat.2014.11.055 ↗
37. W. Kowalski, M. Dammer, F. Bakczewitz, K.P. Schmitz, N. Grabow, and O. Kessler, In-Situ Investigation of Stress Conditions During Expansion of Bare Metals Tents and PLLA-Coated Stents Using the XRD sin2ψ-Technique, J. Mech. Behav. Biomed. Mater., 2015, 49, p 23-2910.1016/j.jmbbm.2015.04.020 ↗
38. G. Abadias, E. Chason, J. Keckes, M. Sebastiani, G.B. Thompson, E. Barthel, G.L. Doll, C.E. Murray, C.H. Stoessel, and L. Martinu, Review Article: Stress in Thin Films and Coatings: Current Status, Challenges, and Prospects, J. Vac. Sci. Technol. A, 2018, 36, p 020801. https://doi.org/10.1116/1.501179010.1116/1.5011790 ↗
39. X.T. Luo, Y.J. Li, C.X. Li, G.J. Yang, and C.J. Li, Effect of Spray Conditions on Deposition Behavior and Microstructure of Cold Sprayed Ni Coatings Sprayed with a Porous Electrolytic Ni Powder, Surf. Coat. Technol., 2016, 289, p 85-9310.1016/j.surfcoat.2016.01.058 ↗
40. J. Wang, J. Sun, H. Zhang, S. Dong, J. Jiang, L. Deng, X. Zhou, and X. Cao, Effect of Spraying Power on Microstructure and Property of Nanostructured YSZ Thermal Barrier Coatings, J. Alloys Compd., 2018, 730, p 471-48210.1016/j.jallcom.2017.09.323 ↗
41. E.J. Chun, M.S. Kim, H. Nishikawa, C. Park, and J. Suh, Laser-Assisted Selective Fusing of Thermal Sprayed Ni-Based Self-Fluxing Alloys by Using High-Power Diode Lasers, Opt. Laser Technol., 2018, 100, p 317-32410.1016/j.optlastec.2017.10.021 ↗
42. N. Kang, C. Verdy, P. Coddet, Y. Xie, Y. Fu, H. Liao, and C. Coddet, Effects of Laser Remelting Process on the Microstructure, Roughness and Microhardness of In-Situ Cold Sprayed Hypoeutectic Al-Si Coating, Surf. Coat. Technol., 2017, 318, p 355-35910.1016/j.surfcoat.2017.01.057 ↗
43. J. Yu, Y. Wang, F. Zhou, L. Wang, and Z. Pan, Laser Remelting of Plasma-Sprayed Nanostructured Al2O3-20 wt% ZrO2 Coatings Onto 316L Stainless Steel, Appl. Surf. Sci., 2018, 431, p 112-12110.1016/j.apsusc.2017.06.204 ↗
44. H.S. Ni, X.H. Liu, X.C. Chang, W.L. Hou, W. Liu, and J.Q. Wang, High Performance Amorphous Steel Coating Prepared by HVOF Thermal Spraying, J. Alloys Compd, 2009, 467, p 163-16710.1016/j.jallcom.2007.11.133 ↗
45. L.Y. Ni, Z.-L. Wu, and C.G. Zhou, Effects of Surface Modification on Isothermal Oxidation Behavior of HVOF-Sprayed NiCrAlY Coatings, Prog. Nat. Sci., 2011, 21, p 173-17910.1016/S1002-0071(12)60052-5 ↗
46. B. Arifvianto, Suyitno, and M. Mahardika, Effects of Surface Mechanical Attrition Treatment (SMAT) on a Rough Surface of AISI, 316L Stainless Steel, Appl. Surf. Sci., 2012, 258, p 4538-454310.1016/j.apsusc.2012.01.021 ↗
47. S. Pour-Ali, A.R.K. Rashid, and A. Babakhani, Surface Nanocrystallization and Gradient Microstructural Evolutions in the Surface Layers of 321 stainless Steel Alloy Treated Via Severe Shot Peening, Vacuum, 2017, 144, p 152-15910.1016/j.vacuum.2017.07.016 ↗
48. K. Aoudia, S. Lamri, S. Achache, D. Retraint, C. Verdy, C. Langlade, S. Azem, and F. Sanchette, Structural and Mechanical Properties of Arc-Sprayed Ni-Cr Coating Post-Treated by Surface Mechanical Attrition Treatment (SMAT), Coatings, 2018, 8, p 42410.3390/coatings8120424 ↗
49. J. Moering, X. Ma, G. Chen, P. Miao, G. Li, G. Qian, S. Mathaudhu, and Y. Zhu, The Role of Shear Strain on Texture and Microstructural Gradients in Low Carbon Steel Processed by Surface Mechanical Attrition Treatment, Scr. Mater., 2015, 108, p 100-10310.1016/j.scriptamat.2015.06.027 ↗
50. N.R. Tao, J. Lu, and K. Lu, Surface Nanocrystallization by Surface Mechanical Attrition Treatment, Mater. Sci. Forum, 2008, 579, p 91-10810.4028/www.scientific.net/MSF.579.91 ↗
51. K. Zhang and Z.B. Wang, Strain-Induced Formation of a Gradient Nanostructured Surface Layer on an Ultrahigh Strength Bearing Steel, J. Mater. Sci. Technol., 2018, 34, p 1676-168410.1016/j.jmst.2017.12.012 ↗
52. M. Liu, J.Y. Li, Y. Ma, T.Y. Yuan, and Q.S. Mei, Surface Nanocrystallization and Property of Ti6Al4V Alloy Induced by High Pressure Surface Rolling, Surf. Coat. Technol., 2016, 289, p 94-10010.1016/j.surfcoat.2016.01.043 ↗
53. M. Wenzelburger, D. López, and R. Gadow, Methods and Application of Residual Stress Analysis on Thermally Sprayed Coatings and Layer Composites, Surf. Coat. Technol., 2006, 201, p 1995-200110.1016/j.surfcoat.2006.04.040 ↗
54. V. Katranidis, S. Gu, B. Allcock, and S. Kamnis, Experimental Study of High Velocity Oxy Fuel Sprayed WC-17Co Coatings Applied on Complex Geometries. Part A: Influence of Kinematic Spray Parameters on Thickness, Porosity, Residual Stresses and Microhardness, Surf. Coat. Technol., 2017, 311, p 206-21510.1016/j.surfcoat.2017.01.015 ↗
55. T.G. Wang, S.S. Zhao, W.G. Hua, J.B. Li, J. Gong, and C. Sun, Estimation of Residual Stress and Its Effects on the Mechanical Properties of Detonation Gun Sprayed WC-Co Coatings, Mater. Sci. Eng., A, 2010, 527, p 454-46110.1016/j.msea.2009.10.009 ↗
56. T. Suhonen, T. Varis, S. Dosta, M. Torrell, and J.M. Guilemany, Residual Stress Development in Cold Sprayed Al, Cu and Ti Coatings, Acta Mater., 2013, 61, p 6329-633710.1016/j.actamat.2013.06.033 ↗
57. O.P. Oladijo, A.M. Venter, L.A. Cornish, and N. Sacksn, X-Ray Diffraction Measurement of Residual Stress in WC-Co Thermally Sprayed Coatings Onto Metal Substrates, Surf. Coat. Technol., 2012, 206, p 4725-472910.1016/j.surfcoat.2012.01.044 ↗
58. S.A. Chamgordani, R. Miresmaeili, and M. Aliofkhazraei, Improvement in Tribological Behavior of Commercial Pure Titanium (CP-Ti) by Surface Mechanical Attrition Treatment (SMAT), Tribol. Int., 2018, 119, p 744-75210.1016/j.triboint.2017.11.044 ↗
59. H. Wohlfahrt, The influence of peening conditions on the resulting distribution of residual stress, in Proceedings of the Second International Conference on Shot Peening [Internet]. 1984, p. 316-331. http://www.shotpeener.com/library/pdf/1984068.pdf.
60. N. Serres, F. Hlawka, S. Costil, C. Langlade, F. Machi, and A. Cornet, Dry coatings and Eco-Design Part 2—Tribological Performances, Surf. Coat. Technol., 2009, 204, p 197-20410.1016/j.surfcoat.2009.07.011 ↗
61. X.Y. Dong, X.T. Luo, S.L. Zhang, and C.J. Li, A Novel Strategy for Depositing Dense Self-fluxing Alloy Coatings with Sufficiently Bonded Splats by One-Step Atmospheric Plasma Spraying, J. Thermal Spray Tech., 2020, 29, p 173-18410.1007/s11666-019-00943-4 ↗
62. W.Y. Tsai, J.C. Huang, Y.J. Gao, Y.L. Chung, and G.R. Huang, Relationship Between Microstructure and Properties for Ultrasonic Surface Mechanical Attrition Treatment, Scr. Mater., 2015, 103, p 45-4810.1016/j.scriptamat.2015.03.003 ↗
63. Y. Liu, B. Jin, D.J. Li, X.Q. Zeng, and J. Lu, Wear Behavior of Nanocrystalline Structured Magnesium Alloy Induced by Surface Mechanical Attrition Treatment, Surf. Coat. Technol., 2015, 261, p 219-22610.1016/j.surfcoat.2014.11.026 ↗
64. B.N. Mordyuk, O.P. Karasevskaya, G.I. Prokopenko, and N.I. Khripta, Ultrafine-Grained Textured Surface Layer on Zr-1%Nb Alloy Produced by Ultrasonic Impact Peening for Enhanced Corrosion Resistance, Surf. Coat. Technol., 2012, 210, p 54-6110.1016/j.surfcoat.2012.08.063 ↗
65. S. Li, Z. Guo, J. Xiong, Y. Lei, Y. Li, J. Tang, J. Liu, and J. Ye, Corrosion Behavior of HVOF Sprayed Hard Face Coatings in Alkaline-Sulfide Solution, Appl. Surf. Sci., 2017, 416, p 69-7710.1016/j.apsusc.2017.04.149 ↗
66. Y. Wang, B. Normand, N. Mary, M. Yu, and H. Liao, Effects of Ceramic Particle Size on Microstructure and the Corrosion Behavior of Cold Sprayed SiCp/Al 5056 Composite Coatings, Surf. Coat. Technol., 2017, 315, p 314-32510.1016/j.surfcoat.2017.02.047 ↗
67. H.R. Masiha, H.R. Bagheri, M. Gheytani, M. Aliofkhazraei, A. Sabour Rouhaghdam, and T. Shahrabi, Effect of Surface Nanostructuring of Aluminum Alloy on Post Plasma Electrolytic Oxidation, Appl. Surf. Sci., 2014, 317, p 962-96910.1016/j.apsusc.2014.08.135 ↗
68. J. Eduardo Berger, R. Schulz, S. Savoie, J. Gallego, C.S. Kiminami, C. Bolfarini, and W.J. Botta, Wear and Corrosion Properties of HVOF Coatings from Superduplex Alloy Modified with Addition of Boron, Surf. Coat. Technol., 2017, 309, p 911-91910.1016/j.surfcoat.2016.10.062 ↗
69. I.C. Park and S.J. Kim, Corrosion Behavior in Seawater of Arc Thermal Sprayed Inconel 625 Coatings with Sealing Treatment, Surf. Coat. Technol., 2017, 325, p 729-73710.1016/j.surfcoat.2017.03.009 ↗
70. M. Sahal, J. Creus, R. Sabot, and X. Feaugas, Consequences of Plastic Strain on the Dissolution Process of Polycrystalline Nickel in H2SO4 Solution, Scr. Mater., 2004, 51, p 869-87310.1016/j.scriptamat.2004.07.004 ↗
71. A. Godon, J. Creus, S. Cohendoz, E. Conforto, X. Feaugas, P. Girault, and C. Savall, Effects of Grain Orientation on the Hall-Petch Relationship in Electrodeposited Nickel with Nanocrystalline Grains, J. Scr. Mater., 2010, 62, p 403-40610.1016/j.scriptamat.2009.11.038 ↗
72. K.D. Ralston and N. Birbilis, Effect of Grain Size on Corrosion: A Review, Corrosion, 2010, 66, p 7500501-775005110.5006/1.3462912 ↗
73. E. Sadeghimeresht, L. Reddy, T. Hussain, N. Markocsan, and S. Joshi, Chlorine-Induced High Temperature Corrosion of HVAF-Sprayed Ni-Based Alumina and Chromia Forming Coatings, Corros. Sci., 2018, 132, p 170-18410.1016/j.corsci.2017.12.033 ↗
74. K. Yuan, R.L. Peng, X.H. Li, and S. Johansson, Hot Corrosion Behavior of HVOF-Sprayed CoNiCrAlYSi Coatings in a Sulphate Environment, Vacuum, 2015, 122, p 47-5310.1016/j.vacuum.2015.09.015 ↗
75. R.A. Mahesh, R. Jayaganthan, and S. Prakash, Evaluation of Hot Corrosion Behavior of HVOF Sprayed NiCrAl Coating on Superalloys at 900 °C, Mater. Chem. Phys., 2008, 111, p 524-53310.1016/j.matchemphys.2008.05.006 ↗
76. J. Creus, E.H. Top, C. Savall, Ph Refait, C. Ducros, and F. Sanchette, Mechanical and Corrosion Properties of dc Magnetron Sputtered Al/Cr Multilayers, Surf. Coat. Technol., 2008, 202, p 4047-405510.1016/j.surfcoat.2008.02.021 ↗
77. J. Creus, H. Idrissi, H. Mazille, F. Sanchette, and P. Jacquot, Corrosion Behavior of Al/Ti Coating Elaborated by Cathodic arc PVD Process Onto Mild Steel Substrate, Thin Solid Films, 1999, 346, p 150-15410.1016/S0040-6090(98)01742-8 ↗
78. R. Walter and M. Bobby Kannan, Influence of Surface Roughness on the Corrosion Behavior of Magnesium Alloy, Mater. Des., 2011, 32, p 2350-235410.1016/j.matdes.2010.12.016 ↗
79. G. Ghosh, A. Sidpara, and P.P. Bandyopadhyay, Understanding the Role of Surface Roughness on the Tribological Performance and Corrosion Resistance of WC-Co Coating, Surf. Coat. Technol., 2019, 378, p 125080210.1016/j.surfcoat.2019.125080 ↗
80. V. Barranco, E. Onofre, M.L. Escudero, and M.C. García-Alonso, Characterization of Roughness and Pitting Corrosion of Surfaces Modified by Blasting and Thermal Oxidation, Surf. Coat. Technol., 2010, 204, p 3783-379310.1016/j.surfcoat.2010.04.051 ↗
81. B. Sivakumar, L.C. Pathak, and R. Singha, Role of Surface Roughness on Corrosion and Fretting Corrosion Behavior of Commercially Pure Titanium in Ringer’s Solution for Bio-Implant Application, Appl. Surf. Sci., 2017, 401, p 385-39810.1016/j.apsusc.2017.01.033 ↗
82. O. Takakuwa and H. Soyama, Effect of Residual Stress on the Corrosion Behavior of Austenitic Stainless Steel, Adv. Chem. Eng. Sci, 2015, 5, p 62-7110.4236/aces.2015.51007 ↗
83. M.H. Mathabatha, A.P.I. Popoola, and O.P. Oladijo, Residual Stresses and Corrosion Performance of Plasma Sprayed Zinc-Based Alloy Coating on Mild Steel Substrate, Surf. Coat. Technol., 2017, 318, p 293-29810.1016/j.surfcoat.2016.10.023 ↗
84. N.M. Alanazi, A.M. El-Sherik, S.H. Alamar, and S. Shen, Influence of Residual Stresses on Corrosion and Wear Behavior of Electrodeposited Nanocrystalline Cobalt-Phosphorus Coatings, Int. J. Electrochem. Sci., 2013, 8, p 10350-1035810.1016/S1452-3981(23)13115-4 ↗
85. D. Liu, Y. Shi, J. Liu, and L. Wen, Effect of Laser Shock Peening on Corrosion Resistance of 316L Stainless Steel Laser Welded Joint, Surf. Coat. Technol., 2019, 378, p 12482410.1016/j.surfcoat.2019.07.048 ↗