Statistical Analysis of the Flexural Strength of Free-Standing Flame-Sprayed Alumina Coatings Prior and After Thermal Shock
Source abstract
Abstract
Abstract The impact of thermal shock upon the scatter of flexural strength data of free-standing thin flame-sprayed Al2O3 coatings was examined. As published in the literature, thermally sprayed ceramic systems exhibit superior thermal shock resistance and against this background, the statistical evaluation of strength data prior and after the thermal shock was intensified. Thus, the Weibull parameters m and σ0 were compared before and after thermal shock from 1000 °C to room temperature. The flexural strength was determined utilising the ball-on-three-balls method. Although the general scale of the Weibull modulus m was rather low (< 6), considerable differences were shown after thermal shocking as the Weibull modulus decreased by a factor of about 3.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. A. Vardelle, C. Moreau, J. Akedo, H. Ashrafizadeh, C.C. Berndt, J.O. Berghaus, M. Boulos, J. Brogan, A.C. Bourtsalas, A. Dolatabadi, M. Dorfman, T.J. Eden, P. Fauchais, G. Fisher, F. Gaertner, M. Gindrat, R. Henne, M. Hyland, E. Irissou, E.H. Jordan, K.A. Khor, A. Killinger, Y.-C. Lau, C.-J. Li, L. Li, J. Longtin, N. Markocsan, P.J. Masset, J. Matejicek, G. Mauer, A. McDonald, J. Mostaghimi, S. Sampath, G. Schiller, K. Shinoda, M.F. Smith, A.A. Syed, N.J. Themelis, F.-L. Toma, J.P. Trelles, R. Vassen, and P. Vuoristo, The 2016 Thermal Spray Roadmap, J. Therm. Spray Technol., 2016, 25, p 1-6510.1007/s11666-016-0473-x ↗
2. T. Kratschmer and C.G. Aneziris, Amorphous Zones in Flame Sprayed Alumina-Titania-Zirconia Compounds, Ceram. Int., 2011, 37, p 181-18810.1016/j.ceramint.2010.09.020 ↗
3. P. Chagnon and P. Fauchais, Thermal Spraying of Ceramics, Ceram. Int., 1984, 10, p 119-13110.1016/0272-8842(84)90001-4 ↗
4. R. McPherson, On the Formation of Thermally Sprayed Alumina Coatings, J. Mater. Sci., 1980, 15, p 3141-314910.1007/BF00550387 ↗
5. D. Munz and T. Fett, Ceramics Mechanical Properties, Failure Behaviour, Materials Selection, Springer Ser. Mater. Sci., 2001, 36, p 25-26
6. T. Kratschmer, C.G. Aneziris, and P. Gruner, Mechanical Properties of Flame Sprayed Free-Standing Coatings, Ceram. Int., 2011, 37, p 2727-273510.1016/j.ceramint.2011.04.027 ↗
7. C.G. Aneziris, P. Gehre, T. Kratschmer, and H. Berek, Thermal Shock Behavior of Flame-Sprayed Free-Standing Coatings Based on Al2O3 with TiO2- and ZrO2-Additions, Int. J. Appl. Ceram. Technol., 2011, 8, p 953-96410.1111/j.1744-7402.2010.02535.x ↗
8. M. Neumann, P. Gehre, J. Kuebler, N. Dadivanyan, H. Jelitto, G.A. Schneider, and C.G. Aneziris, Stable Crack Propagation in Free Standing Thermal Sprayed Al2O3 and Al2O3–ZrO2–TiO2 Coatings, Ceram. Int., 2019, 45, p 8761-876610.1016/j.ceramint.2019.01.200 ↗
9. D.P.H. Hasselman, Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics, J. Am. Ceram. Soc., 1969, 52, p 600-60410.1111/j.1151-2916.1969.tb15848.x ↗
10. D.P.H. Hasselman, Strength Behaviour of Polycrystalline Alumina Subjected to Thermal Shock, J. Am. Ceram. Soc., 1970, 53, p 490-49510.1111/j.1151-2916.1970.tb15997.x ↗
11. C.U. Hardwicke and Y.C. Lau, Advances in Thermal Spray Coatings for Gas Turbines and Energy Generation: A Review, J. Therm. Spray Technol., 2013, 22(5), p 564-57610.1007/s11666-013-9904-0 ↗
12. A. Börger, P. Supancic, and R. Danzer, The Ball on Three Balls Test for Strength Testing of Brittle Discs: Stress Distribution in the Disc, J. Eur. Ceram. Soc., 2002, 22, p 1425-143610.1016/S0955-2219(01)00458-7 ↗
13. H. Zielke, A. Schmidt, M. Abendroth, M. Kuna, and C.G. Aneziris, Influence of the Specimen Manufacturing Process on the Strength of Carbon-Bonded Alumina (Al2O3-C), Adv. Eng. Mater., 2017, 19, p 1-710.1002/adem.201700083 ↗
14. G.D. Quinn, Standardized Rectangular Flexure Specimens, J. Am. Ceram. Soc., 2003, 10, p 508-51010.1111/j.1151-2916.2003.tb03329.x ↗
15. M. Michálek, M. Michálková, G. Blugan, and J. Kuebler, Strength of Pure Alumina Ceramics Above 1 GPa, Ceram. Int., 2018, 44, p 3255-326010.1016/j.ceramint.2017.11.098 ↗
16. P. Ostojic and C.C. Berndt, The Variability in Strength of Thermally Sprayed Coatings, Surf. Coat. Technol., 1988, 34, p 43-5010.1016/0257-8972(88)90087-4 ↗