Erosion Resistance Improvement of Polymer Matrix Composites by Detonation-Sprayed Multilayered Coatings
Source abstract
Abstract
Compared with their metal counterparts, the insufficient erosion resistance of polymer matrix composites (PMC) is a key issue for application in aero-engines. In this study, multilayered coatings were deposited on carbon fiber reinforced bismaleimide polymer composites using detonation spraying to improve their erosion resistance. The coatings consisted of a polymer–aluminum mixed transition layer, pure aluminum bond layer, and WC-17Co top layer The microstructure and bond strength of the coatings were characterized by using scanning electron/transmission electron microscopy and mechanical testing, respectively. Furthermore, solid particle erosion tests were conducted on coated and uncoated PMC at 25 and 250 °C using an air jet. The tests showed that the coatings 150 µm thick were well bonded to the PMC substrate. Substantial enhancement of the coating adhesion up to 16.5 ± 0.5 MPa was achieved by the optimization of the polymer–aluminum mixed transition layer. Under the same erosion conditions, the volume loss of the coated PMC was less than 1/10 of that of uncoated PMC, indicating the effectiveness of the coating to prevent the PMC from the foreign objects’ impact damage. Finally, the coating erosion mechanisms are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · High-Temperature Coating Behaviors · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. S. Vigneshwaran, M. Uthayakumar, V. Arumugaprabu et al., Influence of Filler on Erosion Behavior of Polymer Composites: A Comprehensive Review, J. Reinforced Plast. Compos., 2018, 37(15), p 1011-101910.1177/0731684418777111 ↗
2. N. Miyazaki, Solid Particle Erosion of Composite Materials: A Critical Review, J. Compos. Mater., 2016, 50(23), p 3175-321710.1177/0021998315617818 ↗
3. V. Ulianitsky, I. Batraev, D. Dudin et al., Enhancing the Properties of WC/Co Detonation Coatings Using Two-Component Fuels, Surf. Coat. Technol., 2017, 318, p 244-24910.1016/j.surfcoat.2016.08.008 ↗
4. Z. Geng, S. Hou, G. Shi et al., Tribological Behavior at Various Temperatures of WC-Co Coatings Prepared Using Different Thermal Spraying Techniques, Tribol. Int., 2016, 104, p 36-4410.1016/j.triboint.2016.08.025 ↗
5. Y. Cui, C. Wang, Z. Tang et al., Microstructure and Performance of WC-17Co Coatings Fabricated by High Velocity Oxy-fuel Spraying, J. Mater. Eng., 2011, 11, p 85-89
6. A.A. Kareem and Z. Raheem, Microhardness and Adhesion Strength of PMC’s Coatings by NiCr Alloy, J. Mater. Sci. Eng., 2016, 2016, p 1-5
7. A. Liu, M. Guo, M. Zhao et al., Arc Sprayed Erosion-Resistant Coating for Carbon Fiber Reinforced Polymer Matrix Composite Substrates, Surf. Coat. Technol., 2006, 200, p 3073-307710.1016/j.surfcoat.2005.01.042 ↗
8. W. Huang, X. Gan, and L. Zhu, Fabrication and Property of Novel Double-Layer Coating Deposited on Polyimide Matrix Composites by Atmospheric Plasma Spraying, Ceram. Int., 2018, 44, p 5473-548510.1016/j.ceramint.2017.12.181 ↗
9. A. Liu, M. Guo, J. Gao et al., Influence of Bond Coat on Shear Adhesion Strength of Erosion and Thermal Resistant Coating for Carbon Fiber Reinforced Thermosetting Polyimide, Surf. Coat. Technol., 2006, 201(6), p 2696-270010.1016/j.surfcoat.2006.05.012 ↗
10. M. Ivosevic, R. Knight, S.R. Kalidindi et al., Solid Particle Erosion Resistance of Thermally Sprayed Functionally Graded Coatings for Polymer Matrix Composites, Surf. Coat. Technol., 2006, 200, p 5145-515110.1016/j.surfcoat.2005.05.038 ↗
11. Ulianitsky, V.Y.; Shtertser, A.A.; Zlobin, S.B.; Ostrer, S.G. Procedure for metallisation of part of polymer material by detonation spraying. Patent RU 2,425,912, 4 August 2009.
12. Y. Cui, M. Guo, C. Wang et al., Adhesion Enhancement of a Metallic Al Coating Fabricated by Detonation Gun Spray on a Modified Polymer Matrix Composite, J. Therm. Spray Technol., 2019, 28(7), p 1730-173810.1007/s11666-019-00916-7 ↗
13. Y. Cui, J. Hao, C. Wang et al., Characteristics of Al Coating Fabricated by Detonation Gun spray on Polymer-based Composites, J. Mater. Eng., 2018, 46(6), p 120-124
14. V. Ulianitsky, A. Shtertser, S. Zlobin et al., Computer-Controlled Detonation Spraying: From Process Fundamentals Toward Advanced Applications, J. Therm. Spray Technol., 2011, 20(4), p 791-80110.1007/s11666-011-9649-6 ↗
15. A. Ganesan, M. Yamada, and M. Fukumoto, The Effect of CFRP Surface Treatment on the Splat Morphology and Coating Adhesion Strength, J. Therm. Spray Technol., 2014, 23(1/2), p 236-24410.1007/s11666-013-0003-z ↗
16. F. Robitaille, M. Yandouzi, S. Hind et al., Metallic Coating of Aerospace Carbon/Epoxy Composites by the Pulsed Gas Dynamic Spraying Process, Surf. Coat. Technol., 2009, 203, p 2954-296010.1016/j.surfcoat.2009.03.011 ↗
17. L. Bao, H. Kameel, and K. Kemmochi, Effects of Fiber Orientation Angles of Fiber-Reinforced Plastic on Sand Solid Particle Erosion Behaviors, Adv. Compos. Mater, 2016, 25, p 81-9310.1080/09243046.2016.1180571 ↗
18. P.J. Mathias, W. Wu, K.C. Goretta et al., Solid Particle Erosion of A Graphite-fiber-reinforced Bismaleimide Polymer Composite, Wear, 1989, 135, p 161-16910.1016/0043-1648(89)90103-8 ↗