journal article·2020-01Open access

Corrosion Properties of Thermally Sprayed Bond Coatings Under Plasma-Sprayed Chromia Coating in Sulfuric Acid Solutions

Giovanni Bolelli, Damiano Meschini, Tommi Varis, Veronica Testa, Stefania Morelli, Luca Lusvarghi, Petri Vuoristo

Journal of Thermal Spray Technology· Volume 29· Issue 1-2

Abstract

Plasma-sprayed chromia coatings are known to have excellent corrosion and wear properties in highly acidic conditions at ambient and elevated temperatures, but are not watertight due to their intrinsic porosity. Therefore, in applications involving aggressive environments, the whole component is usually made of a corrosion-resistant alloy, to which the Cr2O3 coating imparts the necessary wear resistance. However, in such aggressive environments, the survival of thermal spray metallic bond layers becomes an issue. The present study deals with the performance in sulfuric acid solutions of coated systems consisting of a Hastelloy C-276 substrate and a plasma-sprayed Cr2O3 top coating with four different intermediate bond coatings. The bond coatings were HVOF-sprayed Ni-20Cr, Hastelloy C-276 and Ultimet alloys and plasma-sprayed tantalum. Open-circuit measurement, electrochemical polarization and electrochemical impedance spectroscopy tests were carried out at room temperature (RT) in solutions with various concentrations. Also, static immersion tests were performed at RT and 60 °C. The results revealed that the HVOF-sprayed Ni-20Cr and Ultimet alloy coatings were significantly attacked by the sulfuric acid electrolyte, especially at 60 °C, whereas the HVOF-sprayed Hastelloy C-276 and plasma-sprayed Ta coatings performed significantly better.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. D. Lee, Wear-resistant coatings, ASM Handbook Volume 5A: Thermal Spray Technology, R.C. Tucker, Jr., Ed., ASM International, Materals Park, OH, 2013, p 253-25610.31399/asm.hb.v05a.a0005734 ↗
2. R.B. Heimann, Applications of Plasma-Sprayed Ceramic Coatings, Key Eng. Mater., 1996, 122-124, p 399-44210.4028/www.scientific.net/KEM.122-124.399 ↗
3. E. Celik, I. Ozdemir, E. Avci, and Y. Tsunekawa, Corrosion Behaviour of Plasma Sprayed Coatings, Surf. Coat. Technol., 2005, 193(1-3), p 297-302. https://doi.org/10.1016/j.surfcoat.2004.08.14310.1016/j.surfcoat.2004.08.143 ↗
4. A.A. Ashary and R.C. Tucker, Electrochemical and Long-Term Corrosion Studies of Several Alloys in Bare Condition and Plasma Sprayed with Cr2O3, Surf. Coat. Technol., 1990, 43-44, p 567-576. https://doi.org/10.1016/0257-8972(90)90107-N10.1016/0257-8972(90)90107-N ↗
5. A.A. Ashary and R.C. Tucker, Electrochemical Corrosion Studies of Alloys Plasma Sprayed with Cr2O3, Surf. Coat. Technol., 1989, 39-40, p 701-709. https://doi.org/10.1016/S0257-8972(89)80032-510.1016/S0257-8972(89)80032-5 ↗
6. M. Fukumoto, Y. Wada, M. Umemoto, and I. Okane, Effect of Connected Pores on the Corrosion Behavior of Plasma Sprayed Alumina Coatings, Surf. Coat. Technol., 1989, 39-40, p 711-720. https://doi.org/10.1016/S0257-8972(89)80033-710.1016/S0257-8972(89)80033-7 ↗
7. C. Monticelli, A. Balbo, and F. Zucchi, Corrosion and Tribocorrosion Behaviour of Thermally Sprayed Ceramic Coatings on Steel, Surf. Coat. Technol., 2011, 205(12), p 3683-3691. https://doi.org/10.1016/j.surfcoat.2011.01.02310.1016/j.surfcoat.2011.01.023 ↗
8. J. Knuuttila, P. Sorsa, T. Mäntylä, J. Knuuttila, and P. Sorsa, Sealing of Thermal Spray Coatings by Impregnation, J. Therm. Spray Technol., 1999, 8(2), p 249-257. https://doi.org/10.1007/s11666-999-0002-210.1007/s11666-999-0002-2 ↗
9. J. Zhang, Z. Wang, P. Lin, W. Lu, Z. Zhou, and S. Jiang, Effect of Sealing Treatment on Corrosion Resistance of Plasma-Sprayed NiCrAl/Cr2O3-8 wt.% TiO2 Coating, J. Therm. Spray Technol., 2011, 20(3), p 508-513. https://doi.org/10.1007/s11666-010-9528-610.1007/s11666-010-9528-6 ↗
10. M. Rosso, A. Scrivani, D. Ugues, and S. Bertini, Corrosion Resistance and Properties of Pump Pistons Coated with Hard Materials, Int. J. Refract. Met. Hard Mater., 2001, 19(1), p 45-52. https://doi.org/10.1016/s0263-4368(00)00053-610.1016/s0263-4368(00)00053-6 ↗
11. D.E. Crawmer, Coating structures, properties, and materials, ASM Handbook—Volume 5A: Thermal Spray Technology, R.C. Tucker, Jr., Ed., ASM International, Materials Park, 2013, p 60-6410.31399/asm.hb.v05a.a0005755 ↗
12. Z. Liu, Z. Chu, Y. Dong, Y. Yang, X. Chen, X. Kong, and D. Yan, The Effect of Metallic Bonding Layer on the Corrosion Behavior of Plasma Sprayed Al2O3 Ceramic Coatings in Simulated Seawater, Vacuum, 2014, 101, p 6-9. https://doi.org/10.1016/j.vacuum.2013.07.03910.1016/j.vacuum.2013.07.039 ↗
13. Ş. Yılmaz, An Evaluation of Plasma-Sprayed Coatings Based on Al2O3 and Al2O3-13 wt.% TiO2 with Bond Coat on Pure Titanium Substrate, Ceram. Int., 2009, 35(5), p 2017-2022. https://doi.org/10.1016/j.ceramint.2008.11.01710.1016/j.ceramint.2008.11.017 ↗
14. Ş. Yılmaz, M. Ipek, G.F. Celebi, and C. Bindal, The Effect of Bond Coat on Mechanical Properties of Plasma-Sprayed Al2O3 and Al2O3–13 wt.% TiO2 Coatings on AISI, 316L Stainless Steel, Vacuum, 2005, 77(3), p 315-321. https://doi.org/10.1016/J.VACUUM.2004.11.00410.1016/J.VACUUM.2004.11.004 ↗
15. J. Barr, C. Estrada, N. Victoria, B. White, and J. Harrison, Influence of metal bond coat thickness on adhesion strength of APS ceramic coatings, ITSC 2015: Proceedings of the International Thermal Spray Conference, A. McDonal, A. Agarwal, G. Bolelli, A. Concustell, Y.-C. Lau, F.-L. Tom, E. Turunen, and C. Widener, Ed., ASM International, Materials Park, 2015, p 1039-1046
16. G. Bolelli, V. Cannillo, L. Lusvarghi, and T. Manfredini, Wear Behaviour of Thermally Sprayed Ceramic Oxide Coatings, Wear, 2006, 261(11–12), p 1298-1315. https://doi.org/10.1016/j.wear.2006.03.02310.1016/j.wear.2006.03.023 ↗
17. H. Ruiz-Luna, J. Porcayo-Calderon, J.M. Alvarado-Orozco, A.G. Mora-García, L. Martinez-Gomez, L.G. Trápaga-Martínez, and J. Muñoz-Saldaña, Influence of Oxidation Treatments and Surface Finishing on the Electrochemical Behavior of Ni-20Cr HVOF Coatings, J. Mater. Eng. Perform., 2017, 26(12), p 6064-6074. https://doi.org/10.1007/s11665-017-3048-110.1007/s11665-017-3048-1 ↗
18. “ULTIMET® Alloy—Principal Features,” 2017, https://www.haynesintl.com/docs/default-source/pdfs/new-alloy-brochures/corrosion-resistant-alloys/brochures/ultimet.pdf?sfvrsn=6 . Accessed 19 July 2019
19. H. Koivuluoto Heli, G. Bolelli, L. Lusvarghi, F. Casadei, and P. Vuoristo, Corrosion Resistance of Cold-Sprayed Ta Coatings in Very Aggressive Conditions, Surf. Coat. Technol., 2010, 205(4), p 1103-110710.1016/j.surfcoat.2010.02.052 ↗
20. H. Koivuluoto, J. Näkki, and P. Vuoristo, Corrosion Properties of Cold-Sprayed Tantalum Coatings, J. Therm. Spray Technol., 2009, 18(1), p 75-8210.1007/s11666-008-9281-2 ↗
21. S. Meunier, “Study of Structure and Corrosion Properties of Plasma Sprayed Tantalum Coatings,” Tampere University of Technology and Ecole Nationale Superieure d’Ingenieurs de Limoges (2018)
22. A.-F. Kanta, M.-P. Planche, and G. Montavon, Electrochemical Characterisations of Al2O3-13%TiO2 Coated by Atmospheric Plasma Spray, Plasma Chem. Plasma Process., 2011, 31(6), p 867-877. https://doi.org/10.1007/s11090-011-9322-310.1007/s11090-011-9322-3 ↗
23. V. Swaminathan, H. Zeng, D. Lawrynowicz, Z. Zhang, and J.L. Gilbert, Electrochemical Investigation of Chromium Oxide-Coated Ti-6Al-4V and Co-Cr-Mo Alloy Substrates, J. Biomed. Mater. Res. Part B Appl. Biomater., 2011, 98B(2), p 369-378. https://doi.org/10.1002/jbm.b.3186110.1002/jbm.b.31861 ↗
24. G. Antou, G. Montavon, F. Hlawka, A. Cornet, and C. Coddet, Exploring Thermal Spray Gray Alumina Coating Pore Network Architecture by Combining Stereological Protocols and Impedance Electrochemical Spectroscopy, J. Therm. Spray Technol., 2006, 15(4), p 765-772. https://doi.org/10.1361/105996306X14704510.1361/105996306X147045 ↗
25. B. Hirschorn, M.E. Orazem, B. Tribollet, V. Vivier, I. Frateur, and M. Musiani, Determination of Effective Capacitance and Film Thickness from Constant-Phase-Element Parameters, Electrochim. Acta, 2010, 55(21), p 6218-6227. https://doi.org/10.1016/j.electacta.2009.10.06510.1016/j.electacta.2009.10.065 ↗
26. G.J. Brug, A.L.G. van den Eeden, M. Sluyters-Rehbach, and J.H. Sluyters, The Analysis of Electrode Impedances Complicated by the Presence of a Constant Phase Element, J. Electroanal. Chem. Interfacial Electrochem., 1984, 176(1-2), p 275-295. https://doi.org/10.1016/S0022-0728(84)80324-110.1016/S0022-0728(84)80324-1 ↗
27. “Tantalum, UNS R05400”, http://www.matweb.com/search/DataSheet.aspx?MatGUID=7d664b2d02034fa9b8873f9dd828000d&ckck=1 . Accessed 19 July 2019
28. “Haynes Hastelloy® C-276 Alloy”, http://www.matweb.com/search/DataSheet.aspx?MatGUID=4361b68268934746ad70542944cdd8cf . Accessed 19 July 2019
29. N. Spinicchia, G. Angella, R. Benocci, A. Bruschi, A. Cremona, G. Gittini, A. Nardone, E. Signorelli, and E. Vassallo, Study of Plasma Sprayed Ceramic Coatings for High Power Density Microwave Loads, Surf. Coatings Technol., 2005, 200(1-4), p 1151-1154. https://doi.org/10.1016/j.surfcoat.2005.02.15410.1016/j.surfcoat.2005.02.154 ↗