A new Metallic Thermal Barrier Coating System for Rocket Engines: Failure Mechanisms and Design Guidelines
Source abstract
Abstract
To protect liquid rocket combustion chamber walls, a coating may be applied on the hot gas side. Recently, a new metallic coating system, applied with high-velocity oxyfuel spray, has been developed. To investigate the damage mechanisms of these coatings under large thermal loads, laser cycling experiments were performed, where the coating surface is heated up with a high-power laser to get a large temperature gradient, similar to the conditions in the combustion chamber. In these laser cycling tests, different damage mechanisms like large-scale buckling of the coatings or vertical cracks were observed. The main aim of this paper is to understand the failure mechanisms and to identify critical loads leading to coating failure. Tensile tests, laser cycling experiments and finite element simulations were carried out to determine critical elastic strains for crack initiation and gain a better understanding of the mechanisms and the critical loads for buckling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Rocket and propulsion systems research · Energetic Materials and Combustion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (86)
Show source-provided references
1. M.J.L. Turner, Rocket and Spacecraft Propulsion, Springer, Berlin, 2009
2. L. Winterfeldt, D. B. Laumert, D. R. Tano, D. P. James, F. Geneau, R. Blasi, and D. G. Hagemann, Redesign of Vulcain 2 Nozzle Extension, AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 41, 200510.2514/6.2005-4536 ↗
3. L. Ogbuji, A Table-Top Technique for Assessing the Blanching Resistance of Cu Alloys, Oxid. Met., 2005, 63(5-6), p 383-39910.1007/s11085-005-4393-2 ↗
4. F. Hötte, T. Fiedler, M.C. Haupt, P. Lungu, C. V. Sethe, and O. Haidn, Experimental Investigations of Thermomechanical Fluid-Structure Interaction in Rocket Combustion Chambers, J. Propuls. Power, 2019. https://doi.org/10.2514/1.B3743910.2514/1.B37439 ↗
5. U. Schulz, K. Fritscher, M. Peters, D. Greuel, and O. Haidn, Fabrication of TBC-Armored Rocket Combustion Chambers by EB-PVD Methods and TLP Assembling, Sci. Technol. Adv. Mater., 2005, 6(2), p 103-11010.1016/j.stam.2004.10.001 ↗
6. M. Fassin, D. Kowollik, S. Wulfinghoff, S. Reese, and M. Haupt, Design Studies of Rocket Engine Cooling Structures for Fatigue Experiments, Arch. Appl. Mech., 2016, 86, p 2063-209310.1007/s00419-016-1160-6 ↗
7. D. Kuhl, J. Riccius, and O.J. Haidn, Thermomechanical Analysis and Optimization of Cryogenic Liquid Rocket Engines, J. Propul. Power, 2002, 18, p 835-84610.2514/2.6007 ↗
8. R. J. Quentmeyer, Thrust Chamber Thermal Barrier Coating Techniques. NASA Report Technical Memorandum, 1988, NASA TM-100933
9. P. Jain, S.V. Raj, and K.J. Hemker, Characterization of Nicraly Coatings for a High Strength, High Conductivity GRCop-84 Copper Alloy, Acta Mater., 2007, 55, p 5103-511310.1016/j.actamat.2007.05.044 ↗
10. T. Fiedler, Wärmedämmschichten für Raketentriebwerke, Niedersächsisches Forschungszentrum für Luftfahrt, Braunschweig, 2018 ((in German))
11. T. Fiedler, T. Fedorova, J. Rösler, and M. Bäker, Design of a Nickel-Based Bond-Coat Alloy for Thermal Barrier Coatings on Copper Substrates, Metals, 2014, 4, p 503-51810.3390/met4040503 ↗
12. T. Fiedler, M. Bäker, and J. Rösler, Finite Element Simulation of Thermal Barrier Coatings in Rocket Engines, in SIMULIA Community Conference, 2015
13. J. Schloesser, Mechanische Integrität von Wärmedämmschichten für den Einsatz in Raketenbrennkammern, Der Andere Verlag, Uelvesbüll, 2014 ((in German))
14. L. Pawlowski, Science and Engineering of Thermal Spray Coatings, Wiley, Hoboken, 200810.1002/9780470754085 ↗
15. R.A. Miller, Current Status of Thermal Barrier Coatings—An Overview, Surf. Coat. Technol., 1987, 30, p 1-1110.1016/0257-8972(87)90003-X ↗
16. R. Vassen, F. Cernuschi, G. Rizzi, A. Scrivani, N. Markocsan, L. Östergren, A. Kloosterman, R. Mevrel, J. Feist, and J. Nicholls, Recent Activities in the Field of Thermal Barrier Coatings Including Burner Rig Testing in the European Union, Adv. Eng. Mater., 2008, 10(10), p 907-92110.1002/adem.200800015 ↗
17. X.Q. Cao, R. Vassen, and D. Stoever, Ceramic Materials for Thermal Barrier Coatings, J. Eur. Ceram. Soc., 2004, 24, p 1-1010.1016/S0955-2219(03)00129-8 ↗
18. A. Feuerstein, J. Knapp, T. Taylor, A. Ashary, A. Bolcavage, and N. Hitchman, Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A Review, J Ther. Spray Technol., 2008, 17(2), p 199-21310.1007/s11666-007-9148-y ↗
19. R.J. Quentmeyer, H.J. Kasper, and J.M. Kazaroff, Investigation of the Effect of Ceramic Coatings on Rocket Thrust Chamber Life, in AIAA/SAE 14th Joint Propulsion Conference, 197810.2514/6.1978-1034 ↗
20. H. Immich and W. Mayer, Cryogenic Liquid Rocket Engine Technology Developments within the German National Technology Programme. in AIAA, 199710.2514/6.1997-2822 ↗
21. H. Immich, J. Kretschmer, and D. Preclik, Technology Developments for Cryogenic Rocket Engines. in 36th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 200010.2514/6.2000-3780 ↗
22. H. Immich, J. Alting, J. Kretschmer, and D. Preclik, Technology Development for Thrust Chambers of Future Launch Vehicle Liquid Rocket Engines, Acta Astronaut., 2003, 53, p 597-60510.1016/S0094-5765(03)80021-8 ↗
23. D. Greuel, D. Suslov, O. Haidn, and K. Fritscher, Thermal Barrier Coatings for Cryogenic Rocket Engines, AIAA J., 2002, 1, p 4145
24. K. Fritscher, J. Brien, C. Kröder, D. Greuel, and U. Schulz, Application and Testing of EBPVD Thermal BARRIER Coatings for Cryogenic Rocket Systems, in 4th European Workshop Hot Structures and Thermal Protection Systems for Space Vehicles, 2003
25. A. Golikov and M. Polyanskii, Thermocyclic Testing of Heat-Resistant Coatings at Megawatt Three-Phase Plasmatron, J. Eng. Thermophys., 2008, 17(4), p 311-31910.1134/S1810232808040061 ↗
26. J. Schloesser, M. Bäker, and J. Rösler, Laser Cycling and Thermal Cycling Exposure of Thermal Barrier Coatings on Copper Substrates, Surf. Coat. Technol., 2011, 206, p 1605-160810.1016/j.surfcoat.2011.07.084 ↗
27. W. Schröder, F. Breede, C. Danowski, M. Grilli, M. Hahn, M. Hosters, M. Klaus, D. Kowollik, C. Genin, G. Schiedder, J. Schloesser, V. Tini, T. Wallmersperger, and S. Willems, Sfb transregio 40: Schubdüse, Deutscher Luft- und Raumfahrtkongress, 2011 (in German)
28. T. Fiedler, J. Schloesser, J. Rösler, and M. Bäker, Development of a Thermal-Barrier Coating-System for Rocket Combustion Chambers, in 6th European Conference for Aeronautics and Space Sciences, 201510.1007/s11666-015-0325-0 ↗
29. D.S.C. Kowollik, P. Horst, and M.C. Haupt, Fluid-Structure Interaction Analysis Applied to Thermal Barrier Coated Cooled Rocket Thrust Chamber with Subsequent Local Investigation of Delamination Phenomena, Prog. Propuls. Phys., 2013, 4, p 617-63610.1051/eucass/201304617 ↗
30. L.J. Ghosn and S.V. Raj, Residual Stresses in Thermal Barrier Coatings for a Cu-8Cr-4Nb Substrate System, in NASA Technical Memorandum, 2002, 2002-211561
31. S.V. Raj. Blanch Resistant and Thermal Barrier NiAl Coating Systems for Advanced Copper Alloys. US-Patent, 2015
32. J.A. Nesbitt, NiCrAlY and CuCr Protective Coatings Tested for Copper-Based Thrust Chambers, Research and Technology, 2005, pp. 112-114
33. V. Fedorov, V. Chvanov, F. Chelkins, A. Polyanski, N. Ivanov, I. Lozino-Lozinskaya, and A. Buryak, The Chamber Cooling System of RD-170 Engine Family: Design, Parameters, and Hardware Investigation Data, in 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 200610.2514/6.2006-4363 ↗
34. A. Vasin, V. Fedorov, and G. Babaeva, Coating for a Liquid-Propellant Rocket Combustion Chamber. EU-Patent, 2005
35. K. Hemker, Microsample Characterization of Coatings for GRCop- 84 for High Heat Flux Applications. NASA Report, 2003, CR-2003-212200
36. L.U. Ogbuji, Oxidation Behavior of Cu-Cr Environmental Barrier Coatings on Cu-8Cr-4Nb, Surf. Coat. Technol., 2005, 197(2-3), p 327-33510.1016/j.surfcoat.2005.01.116 ↗
37. S.V. Raj, L.J. Ghosn, C. Robinson, and D. Humphrey, High Heat Flux Exposures of Coated GRCop-84 Substrates, Mater. Sci. Eng., A, 2007, 457, p 300-31210.1016/j.msea.2006.12.133 ↗
38. S.V. Raj, C. Barrett, J. Karthikeyabn, and R. Garlick, Comparison of the Cyclic Oxidation Behavior of Cold Sprayed CuCrAl-Coated and Uncoated GRCop-84 Substrates for Space Launch Vehicles, Surf. Coat. Technol., 2007, 201, p 7222-723410.1016/j.surfcoat.2007.01.034 ↗
39. M. Bäker, T. Fiedler, and J. Rösler, Stress Evolution in Thermal Barrier Coatings for Rocket Engine Applications, Mech. Adv. Mater. Mod. Process., 2015, 1(5), p 1-10
40. T. Fiedler, R. Groß, J. Rösler, and M. Bäker, Damage Mechanisms of Metallic HVOF-Coatings for High Heat Flux Application, Surf. Coat. Technol., 2017, 316, p 219-22510.1016/j.surfcoat.2017.03.037 ↗
41. R.R. Holmes, S.K. Elam, and C.A. Power, Rapid Vacuum Plasma Spray (VPS) Closeout of Liquid Rocket Engine Combustion Chamber Cooling Channels for Both Time and Cost Savings. NASA-Report, 2009, M09-0531
42. U. Schulz, M. Peters, F.W. Bach, and G. Tegeder, Graded Coatings for Thermal, Wear and Corrosion Barriers, Mat. Sci. Eng. A, 2003, 362, p 61-8010.1016/S0921-5093(03)00579-3 ↗
43. S. Deshpande, S. Sampath, and H. Zhang, Mechanisms of Oxidation and Its Role in Microstructural Evolution of Metallic Thermal Spray Coatings—Case Study for Ni-Al, Surf. Coat. Technol., 2006, 200, p 5395-540610.1016/j.surfcoat.2005.07.072 ↗
44. S. Bose, High Temperature Coatings, Elsevier, Amsterdam, 2007
45. M.J. Donachie and S.J. Donachie, Superalloys, ASM International, Russell Township, 200210.31399/asm.tb.stg2.9781627082679 ↗
46. P.N. Quested, R.F. Brooks, L. Chapman, R. Morelli, Y. Youssef, and K.C. Mills, Measurement and Estimation of Thermophysical Properties of Nickel Based Superalloys, Mater. Sci. Technol., 2009, 25, p 154-16210.1179/174328408X361454 ↗
47. F. Traeger, R. Vaßen, K.H. Rauwald, and D. Stöver, Thermal Cycling Setup for Testing Thermal Barrier Coatings, Adv. Eng. Mater., 2003, 5(6), p 429-43210.1002/adem.200300337 ↗
48. D. Nies, R. Pulz, S. Glaubitz, M. Finn, B. Rehmer, and B. Skrotzki, Testing of Thermal Barrier Coatings by Laser Excitation, Adv. Eng. Mater., 2010, 12, p 1224-122910.1002/adem.201000212 ↗
49. A. Gernoth, J. Riccius, E. Suslova, C. Böhm, E. Zametaev, L. Brummer, O.J. Haidn, B. Mewes, and K. Quering, Laser-Heating for Thermo-Mechanical Fatigue Simulation. in IAA-RACT, 2008
50. A. Gernoth, J.R. Riccius, and S. Schlechtriem, Optical Heating, Thermography and Deformation Measurement of Nozzle Wall Structures, in 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 201110.2514/6.2011-1264 ↗
51. U. Rettig, U. Bast, D. Steiner, and M. Oechsner, Characterization of Fatigue Mechanisms of Thermal Barrier Coatings by a Novel Laser-Based Test, J. Eng. Gas Turbines Power, 1999, 121, p 259-26410.1115/1.2817115 ↗
52. B.D. Choules, K. Kokini, and T.A. Taylor, Thermal Fracture of Thermal Barrier Coatings in a High Heat Flux Environment, Surf. Coat. Technol., 1998, 106, p 23-2910.1016/S0257-8972(98)00485-X ↗
53. R.S. Lima and B.R. Marple, Insights on the High-Temperature Operational Limits of ZrO2-Y2O3 TBCs Manufactured Via Air Plasma Spray, J. Mater. Eng. Perform., 2017, 26(3), p 1272-128210.1007/s11665-017-2562-5 ↗
54. R.S. Lima, B.R. Marple, and P. Marcoux, Thermal Gradient Behavior of TBCs Subjected to a Laser Gradient Test Rig: Simulation an Air-to-Air Combat Flight, J. Therm. Spray Technol., 2016, 25(1-2), p 282-29010.1007/s11666-015-0311-6 ↗
55. M.P. Celano, H. Rochlitz, F. Hötte, O.J. Haidn, P. Scholz, and M.C. Haupt, Experimental Investigation on Heat Transfer of Rocket Combustion Chambers and Cooling Channels. in Sonderforschungsbereich/Transregio 40—Annual Report, 2015
56. K.P. van Hooser and D.P. Bradley, Space Shuttle Mail Engine—The Relentless Pursuit of Improvement, in AIAA SPACE 2011 Conference, 2011
57. W. Ley, K. Wittmann, and W. Hallmann, Handbook of Space Technology, Wiley, Hoboken, 2009
58. K.T.K. Chiang, J.H. Arps, and R. Wei, Nanostructured Low-Cr Cu-Cr Coatings for High Temperature Oxidation Resistance. US-Patent, 2009, 7592051
59. M. Popp and G. Schmidt, Rocket Engine Combustion Chamber Design Concepts for Enhanced Life, in AIAA, ASME, SAE and ASEE Joint Propulsion Conference and Exhibit No. 32, 199610.2514/6.1996-3303 ↗
60. R.J. Quentmeyer, Experimental Fatigue Life Investigation of Cylindrical Thrust Chambers, in AIAA/SAE Propulsion Conference No. 13, 197710.2514/6.1977-893 ↗
61. T. Fiedler, M. Bäker, and J. Rösler, Large Heat Flux Exposure of Metallic Coatings for Rocket Engine Applications, Surf. Coat. Technol., 2017, 332, p 30-3910.1016/j.surfcoat.2017.08.075 ↗
62. Abaqus Analysis User’s Manual (6.12), Dassault Systèmes. 2012
63. Kupferdatenblatt CuCr1Zr., Deutsches Kupferinstitut, 2005 (in German)
64. G. Pintsuk, J. Blumm, W. Hohenauer, R.C. Hula, T. Koppitz, S. Lindig, D. Pitzer, M. Rohde, P. Schoderböck, T. Schubert, F. Tietz, and O. Wouters, Interlaboratory Test on Thermophysical Properties of the Iter Grade Heat Sink Material Copper-Chromium-Zirconium, Int. J. Thermophys., 2010, 31, p 2147-215810.1007/s10765-010-0857-y ↗
65. M. Fassin, D. Kowollik, S. Reese, K. Lindhorst, and M. Haupt, Parameter Identification and Acceleration of Fluid Structure Interaction Based Lifetime Prediction for Rocket Engine Nozzle Structures, in Sonderforschungsbereich Transregio 40 Annual Report, 2015
66. M. Fassin, Poissons Ratio of CuCr1Zr, Institute of Applied Mechanics RWTH Aachen University, private communication, 2015
67. Y.S. Touloukian, R.K. Kirby, R.E. Taylor, and P.D. Desai, Thermophysical Properties of Matter 12: Thermal Expansion—Metallic Elements and Alloys, IFI/Plenum, New York, 1975
68. K. Dies, Kupfer und Kupferlegierungen in der Technik, Springer, Berlin, 1967 ((in German))10.1007/978-3-642-48931-0 ↗
69. Y.S. Touloukian and E.H. Buyco, Thermophysical Properties of Matter 4: Specific Heat—Metallic Elements and Alloys, IFI/Plenum, New York, 1970
70. J. Wisniewski, J.M. Drezet, D. Ayrault, and B. Cauwe, Determination of the Thermophysical Properties of a CuCr1Zr Alloy from Liquid State Down to Room Temperature, Int. J. Mater. Form., 2008, 1(1), p 1059-106210.1007/s12289-008-0201-2 ↗
71. D. Kowollik, V. Tini, S. Reese, and M. Haupt, 3D Fluid-Structure Interaction Analysis of a Typical Liquid Rocket Engine Cycle Based on a Novel Viscoplastic Damage Model, Int. J. Numer. Method Eng., 2013, 94(13), p 1165-119010.1002/nme.4488 ↗
72. R. Bürgel, H.J. Maier, and T. Niendorf, Handbuch Hochtemperatur-Werkstofftechnik, Vieweg, Wiesbaden, 2011 ((in German))10.1007/978-3-8348-9907-1 ↗
73. T. Fiedler, H.-R. Sinning, J. Rösler, and M. Bäker, Temperature Dependent Mechanical Properties of Metallic HVOF Coatings, Surf. Coat. Technol., 2018, 349, p 32-3610.1016/j.surfcoat.2018.05.062 ↗
74. H.-D. Baehr and K. Stephan, Wärme- und Stoffübertragung, Springer, Berlin, 2016 ((in German))
75. A. Magnier, T. Wu, and T. Fiedler, Measurement of Residual Stresses in Thermal Barrier Coatings, to be published, 2019
76. A.G. Evans and W. Hutchinson, The Mechanics of Coating Delamination in Thermal Gradients, Surf. Coat. Technol., 2007, 201, p 7905-791610.1016/j.surfcoat.2007.03.029 ↗
77. I. Hofinger, H.A. Bahr, H. Bahlke, G. Kirchhoff, C. Häuseler, and H.J. Weiss, Fracture Mechanical Modelling and Damage Characterization of Functionally Graded Thermal Barrier Coatings by Means of Laser Irradiation, Mater. Sci. Forum, 1999, 308-311, p 450-45810.4028/www.scientific.net/MSF.308-311.450 ↗
78. T. Fiedler, H.-R. Sinning, J. Rösler, and M. Bäker, Material Parameter Identification for Finite Element Modelling of Coatings for Rocket Combustion Chambers, in Sonderforschungsbereich/Transregio 40—Annual Report 2017, 2017
79. J.W. Hutchinson, M.Y. He, and A.G. Evans, The Influence of Imperfections on the Nucleation and Propagation of Buckling Driven Delaminations, J. Mech. Phys. Solids, 2000, 48, p 709-73410.1016/S0022-5096(99)00050-2 ↗
80. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit, Mechanisms Controlling the Durability of Thermal Barrier Coatings, Prog. Mater. Sci., 2001, 46, p 505-55310.1016/S0079-6425(00)00020-7 ↗
81. J.W. Hutchinson, Stress and Failure Modes in Thin Films and Multilayers. Technical University of Denmark, Notes for a DCAMM Course, 1996
82. J.W. Hutchinson, M.D. Thouless, and E.G. Liniger, Growth and Configurational Stability of Circular Buckling-Driven Film Delaminations, Acta Metall. Mater., 1992, 40(2), p 295-30810.1016/0956-7151(92)90304-W ↗
83. S.P. Timoshenko and J.M. Gere, Theory of Elastic Stability, McGraw-Hill International Book Company, New York City, 1985
84. M. Bäker, Finite Element Simulation of Interface Cracks in Thermal Barrier Coatings, Comput. Mater. Sci., 2012, 64, p 79-8310.1016/j.commatsci.2012.02.044 ↗
85. A.G. Evans, M.Y. He, and J.W. Hutchinson, Effect of Interface Undulations on the Thermal Fatigue of Thin Films and Scales on Metal Substrates, Acta Mater., 1997, 45(9), p 3543-355410.1016/S1359-6454(97)00062-1 ↗
86. M. Bäker and P. Seiler, A Guide to Finite Element Simulations of Thermal Barrier Coatings, J. Therm. Spray Technol., 2017, 26(6), p 1146-116010.1007/s11666-017-0592-z ↗