Comparison of Ceramic Insulation Coatings via Impedance Spectroscopy
Source abstract
Abstract
Abstract Alumina is often used for electrical insulation. However, different material systems promise to increase the insulation due to their material characteristics. Because of the process properties including high cooling rates, thermally sprayed coatings generally differ from sintered material, which also effect the electrical properties. Within this study, different thermally sprayed coatings are analyzed via impedance spectroscopy to evaluate the capacitive and the electrical insulation behavior. Besides comparing the frequency-dependent resistance, equivalent circuit diagrams were used to calculate the relative permittivity of the coatings. X-ray diffractograms reveal the phase stability of the coatings during thermal spraying. X-ray diffraction was additionally conducted to classify the systems and the respective effects. In particular, the investigated mullite-based coatings exhibit slightly increased impedance values compared to conventionally used alumina-based coating systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · High-Temperature Coating Behaviors · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. K. Bobzin, W. Wietheger, M.A. Knoch and S.R. Dokhanchi, Estimation of Particle Mass Flow Rate in Free Jet Using In-Flight Particle Diagnostics in Plasma Spraying, J. Therm. Spray Technol., 2020, 29(5), p 921-931. https://doi.org/10.1007/s11666-020-01027-410.1007/s11666-020-01027-4 ↗
2. H. Weng, F.L. Duan, Z. Ji, X. Chen, Z. Yang, Y. Zhang and B. Zou, Electrical Insulation Improvements of Ceramic Coating for High Temperature Sensors Embedded on Aeroengine Turbine Blade, Ceram. Int., 2020, 46(3), p 3600-3605. https://doi.org/10.1016/j.ceramint.2019.10.07810.1016/j.ceramint.2019.10.078 ↗
3. S. Sampath, J. Longtin, R. Gambino, H. Herman, R. Greenlaw and E. Tormey, Chapter 9 - Direct-Write Thermal Spraying of Multilayer Electronics and Sensor Structures: Direct-Write Technologies for Rapid Prototyping, Elsevier, Amsterdam, 2002.
4. L. Pawlowski, The Relationship between Structure and Dielectric Properties in Plasma-Sprayed Alumina Coatings, Surf. Coat. Technol., 1987, 35, p 285-298.10.1016/0257-8972(88)90042-4 ↗
5. R. McPherson, Formation of Metastable Phases in Flame- and Plasma-Prepared Alumina, J. Mater. Sci., 1973, 8(6), p 851-858. https://doi.org/10.1007/BF0239791410.1007/BF02397914 ↗
6. I. Levin and D. Brandon, Metastable Alumina Polymorphs: Crystal Structures and Transition Sequences, J. Am. Ceram. Soc., 1998, 8, p 1995-2012. https://doi.org/10.1111/j.1151-2916.1998.tb02581.x10.1111/j.1151-2916.1998.tb02581.x ↗
7. A.A. Tsyganenko and P.P. Mardilovich, Structure of Alumina Surfaces, J. Chem. Soc. Faraday Trans., 1996, 92(23), p 4843. https://doi.org/10.1039/FT996920484310.1039/FT9969204843 ↗
8. M. Trueba and S.P. Trasatti, γ-Alumina as a Support for Catalysts: A Review of Fundamental Aspects, Eur. J. Inorg. Chem., 2005, 2005(17), p 3393-3403. https://doi.org/10.1002/ejic.20050034810.1002/ejic.200500348 ↗
9. F.-L. Toma, S. Scheitz, L.-M. Berger, V. Sauchuk, M. Kusnezoff and S. Thiele, Comparative Study of the Electrical Properties and Characteristics of Thermally Sprayed Alumina and Spinel Coatings, J. Therm. Spray Technol., 2011, 20(1-2), p 195-204. https://doi.org/10.1007/s11666-010-9580-210.1007/s11666-010-9580-2 ↗
10. M. Niittymaki, K. Lahti, T. Suhonen and J. Metsajoki, Effect of Temperature and Humidity on Dielectric Properties of Thermally Sprayed Alumina Coatings, IEEE Trans. Dielectr. Electr. Insul., 2018, 25(3), p 908-918. https://doi.org/10.1109/TDEI.2018.00689210.1109/TDEI.2018.006892 ↗
11. F.-L. Toma, L.-M. Berger, S. Scheitz, S. Langner, C. Rödel, A. Potthoff, V. Sauchuk and M. Kusnezoff, Comparison of the Microstructural Characteristics and Electrical Properties of Thermally Sprayed Al2O3 Coatings from Aqueous Suspensions and Feedstock Powders, J. Therm. Spray Technol., 2012, 21(3–4), p 480-488. https://doi.org/10.1007/s11666-012-9761-210.1007/s11666-012-9761-2 ↗
12. N. Schlegel, S. Ebert, G. Mauer and R. Vaßen, Columnar-Structured Mg-Al-Spinel Thermal Barrier Coatings (TBCs) by Suspension Plasma Spraying (SPS), J. Therm. Spray Technol., 2014 https://doi.org/10.1007/s11666-014-0138-610.1007/s11666-014-0138-6 ↗
13. M. Braulio, M. Rigaud, A. Buhr, C. Parr and V.C. Pandolfelli, Spinel-Containing Alumina-Based Refractory Castables, Ceram. Int., 2011, 37, p 1705-1724. https://doi.org/10.1016/j.ceramint.2011.03.04910.1016/j.ceramint.2011.03.049 ↗
14. H. Schneider, J. Schreuer and B. Hildmann, Structure and Properties of Mullite—A Review, J. Eur. Ceram. Soc., 2008, 28(2), p 329-344. https://doi.org/10.1016/j.jeurceramsoc.2007.03.01710.1016/j.jeurceramsoc.2007.03.017 ↗
15. P. Ramaswamy, S. Seetharamu, K. Varma and K.J. Rao, Thermal Shock Characteristics of Plasma Sprayed Mullite Coatings, J Therm Spray Tech, 1998, 7(4), p 497-504. https://doi.org/10.1361/10599639877035071010.1361/105996398770350710 ↗
16. K.N. Lee, R.A. Miller and N.S. Jacobson, New Generation of Plasma-Sprayed Mullite Coatings on Silicon Carbide, J. Am. Ceram. Soc., 1995, 78(3), p 705-710. https://doi.org/10.1111/j.1151-2916.1995.tb08236.x10.1111/j.1151-2916.1995.tb08236.x ↗
17. I.A. Aksay, D.M. Dabbs and M. Sarikaya, Mullite for Structural, Electronic, and Optical Applications, J. Am. Ceram. Soc., 1991, 74(10), p 2343-2358. https://doi.org/10.1111/j.1151-2916.1991.tb06768.x10.1111/j.1151-2916.1991.tb06768.x ↗
18. E. Garcia, J. Mesquita-Guimarães, P. Miranzo and M.I. Osendi, Porous Mullite and Mullite–ZrO2 Granules for Thermal Spraying Applications, Surf. Coat. Technol., 2011, 205(17–18), p 4304-4311. https://doi.org/10.1016/j.surfcoat.2011.03.06010.1016/j.surfcoat.2011.03.060 ↗
19. K. Bobzin, W. Wietheger, M.A. Knoch, E. Burbaum, T. Hosenfeldt, N. Bagcivan, M. Öte, A. Heckl, B. Müller, C. Kunde, and A.-L. Elsner, Enhancement of the insulation properties of thermal sprayed ceramic bearing coatings, Bearing World Journal, 2020, 5, 35–46.
20. A.-L. Elsner, c. Kunde, W. Togrund, K. Bobzin, W. Wietheger, and E. Burbaum, UV-Dual Curing Sealers for Short Cycling Times of Thermally Sprayed Parts. Thermal Spray 2021: Proceedings from the International Thermal Spray Conference, p 346-353. https://doi.org/10.31399/asm.cp.itsc2021p0346.10.31399/asm.cp.itsc2021p0346 ↗
21. J.A. Nelder and R. Mead, A Simplex Method for Function Minimization, Comput. J., 1965, 7(4), p 308-313. https://doi.org/10.1093/comjnl/7.4.30810.1093/comjnl/7.4.308 ↗
22. A. Ohmori and C.-J. Li, Quantitative Characterization of the Structure of Plasma-Sprayed Al2O3 Coating by Using Copper Electroplating, Thin Solid Films, 1991, 201(2), p 241-252. https://doi.org/10.1016/0040-6090(91)90114-D10.1016/0040-6090(91)90114-D ↗
23. A. Vardelle, C. Moreau, J. Akedo, H. Ashrafizadeh, C.C. Berndt, J.O. Berghaus, M. Boulos, J. Brogan, A.C. Bourtsalas, A. Dolatabadi, M. Dorfman, T.J. Eden, P. Fauchais, G. Fisher, F. Gaertner, M. Gindrat, R. Henne, M. Hyland, E. Irissou, E.H. Jordan, K.A. Khor, A. Killinger, Y.-C. Lau, C.-J. Li, L. Li, J. Longtin, N. Markocsan, P.J. Masset, J. Matejicek, G. Mauer, A. McDonald, J. Mostaghimi, S. Sampath, G. Schiller, K. Shinoda, M.F. Smith, A.A. Syed, N.J. Themelis, F.-L. Toma, J.P. Trelles, R. Vassen and P. Vuoristo, The 2016 Thermal Spray Roadmap, J. Therm. Spray Technol., 2016, 25(8), p 1376-1440. https://doi.org/10.1007/s11666-016-0473-x10.1007/s11666-016-0473-x ↗
24. J. Knuuttila, P. Sorsa and T. Mäntylä, Sealing of Thermal Spray Coatings by Impregnation, J. Therm. Spray Technol., 1999, 8(2), p 249-257. https://doi.org/10.1007/s11666-999-0002-210.1007/s11666-999-0002-2 ↗
25. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.-Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak and A. Cardona, Fiji: an open-source platform for biological-image analysis, Nature methods, 2012, 9(7), p 676-682. https://doi.org/10.1038/nmeth.201910.1038/nmeth.2019 ↗
26. I. Arganda-Carreras, V. Kaynig, C. Rueden, K.W. Eliceiri, J. Schindelin, A. Cardona and H. Sebastian Seung, Trainable Weka Segmentation: A Machine Learning Tool for Microscopy Pixel Classification, Bioinformatics, 2017, 33(15), p 2424-2426. https://doi.org/10.1093/bioinformatics/btx18010.1093/bioinformatics/btx180 ↗
27. N. Maskil and M. Deutsch, Structure and Wavelength of the Cu K Alpha 2 X-ray Emission Line, Phys. Rev. A, General Phys., 1988, 37(8), p 2947-2952. https://doi.org/10.1103/PhysRevA.37.294710.1103/PhysRevA.37.2947 ↗
28. Ludwig Julius Gauckler and Kazimierz Conder, Funktionskeramik Ingenieurkeramik 3, 4, 2001. https://doi.org/10.13140/RG.2.2.13188.63367.10.13140/RG.2.2.13188.63367 ↗
29. P. Ctibor, J. Sedláček, K. Neufuss, J. Dubský and P. Chráska, Dielectric Properties of Plasma-Sprayed Silicates, Ceram. Int., 2005, 2, p 315-321. https://doi.org/10.1016/j.ceramint.2004.05.02210.1016/j.ceramint.2004.05.022 ↗
30. J.F. Shackelford and R.H. Doremus, Ceramic and Glass Materials: Structure, Properties and Processing, 1st ed. Springer, Berlin, 2008.10.1007/978-0-387-73362-3 ↗
31. D. Hülsenberg, Keramik: Wie ein alter Werkstoff hochmodern wird, Springer Vieweg, Berlin, 2014.10.1007/978-3-642-53883-4 ↗
32. R.D. Shannon and G.R. Rossman, Dielectric Constant of MgAl2O4 Spinel and the Oxide Additivity Rule, Journal of Physics and Chemistry of Solids, 1991, 52, p 1055-1059. https://doi.org/10.1016/0022-3697(91)90038-210.1016/0022-3697(91)90038-2 ↗
33. I. Ganesh, A Review on Magnesium Aluminate Spinel: Synthesis, Processing and Applications, Int. Mater. Rev., 2013, 58(2), p 63-112. https://doi.org/10.1179/1743280412Y.000000000110.1179/1743280412Y.0000000001 ↗