journal article·2023-12

Effect of Laser-Glazed Treatment on Thermal Cyclic Behavior of Plasma-Sprayed Lanthanum Zirconate/Yttria-Stabilized Zirconia Double Ceramic Layered on NiCoCrAlYTa-coated Inconel

Azrina Arshad, Muhamad Azizi Mat Yajid, Mohammadreza Daroonparvar, Mohd Hasbullah Idris, Intan Syaqirah Mohd Zulkifli, Ahmed G. Hassan, Zulhelmi Alif Abdul Halim

Publisher page

Abstract

This paper investigates the thermal barrier coating (TBC) performance of La2Zr2O7/ZrO (2-8 wt.%) Y2O3 coatings (LZ/YSZ TBCs) deposited using atmospheric plasma spray (APS) over high velocity oxy-fuel (HVOF) NiCoCrAlYTa coated on Inconel 625. On the outermost surface of the double-layered coating, a laser glazing method was used to treat the TBC systems. Specifically, a Nd:YAG pulsed laser was used to change the surface layer of plasma-sprayed La2Zr2O7 top coatings. The study found that the laser glazing treatment resulted in a higher number of temperature cycles needed to generate 5-20% spallation of the top surface of coatings, with 100 cycles compared to 30 cycles in the as-sprayed coatings. This improvement in performance was attributed to the dense surface of the laser-glazed LZ topcoat, which led to a lower thermally grown oxide (TGO) layer growth rate and improved TBC lifetime. Furthermore, the strain adaptation through segmented cracks that were created by laser glazing may have contributed to the enhanced TBC performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear materials and radiation effects · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. R.J. Hunt, The History of the Industrial Gas Turbine (Part 1 The First Fifty Years 1940-1990), Indep. Tech. Forum Power Gener., 2011, 582-2, p 1-48.
2. A.D. Johari, A Review of Advance Thermal Barrier Coating Architecture, 2015, (April), p 8-9
3. C.S. Ramachandran, V. Balasubramanian and P.V. Ananthapadmanabhan, Thermal Cycling Behaviour of Plasma Sprayed Lanthanum Zirconate Based Coatings under Concurrent Infiltration by a Molten Glass Concoction, Ceram. Int., 2013, 39(2), p 1413–1431.10.1016/j.ceramint.2012.07.084 ↗
4. R. Ahmadi-Pidani, R. Shoja-Razavi, R. Mozafarinia and H. Jamali, Laser Surface Modification of Plasma Sprayed CYSZ Thermal Barrier Coatings, Ceram. Int., 2013, 39(3), p 2473–2480. https://doi.org/10.1016/j.ceramint.2012.09.00510.1016/j.ceramint.2012.09.005 ↗
5. R. Ghasemi, R. Shoja-Razavi, R. Mozafarinia and H. Jamali, The Influence of Laser Treatment on Thermal Shock Resistance of Plasma-Sprayed Nanostructured Yttria Stabilized Zirconia Thermal Barrier Coatings, Ceram. Int., 2014, 40(1), p 347–355. https://doi.org/10.1016/j.ceramint.2013.06.00810.1016/j.ceramint.2013.06.008 ↗
6. N.P. Padture, M. Gell, E.H. Jordan, P. Nitin and H. Eric, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296(5566), p 280–284. https://doi.org/10.1126/science.106860910.1126/science.1068609 ↗
7. D.R. Clarke, M. Oechsner and N.P. Padture, Thermal-Barrier Coatings for More Efficient Gas-Turbine Engines, MRS Bull., 2012, 37(10), p 891–898.10.1557/mrs.2012.232 ↗
8. M. Daroonparvar, M. Azizi, M.M.A.M. Yajid, N.M. Yusof, H.R. Bakhsheshi-Rad, Z. Valefi and E. Hamzah, Effect of Y2O3 Stabilized ZrO2 Coating with Tri-Model Structure on Bi-Layered Thermally Grown Oxide Evolution in Nano Thermal Barrier Coating Systems at Elevated Temperatures, J. Rare Earths, Chin. Soc. Rare Earths, 2014, 32(1), p 57–77. https://doi.org/10.1016/S1002-0721(14)60034-X10.1016/S1002-0721(14)60034-X ↗
9. H. Yang, J. Zou, Q. Shi, M. Dai, S. Lin and W. Du, Analysis of the Microstructural Evolution and Interface Di Ff Usion Behavior of NiCoCrAlYTa Coating in High Temperature Oxidation, Corros. Sci., 2019, 153(Februry), p 162–169. https://doi.org/10.1016/j.corsci.2019.03.02210.1016/j.corsci.2019.03.022 ↗
10. I.S.M. Zulkifli, M.A.M. Yajid, M.H. Idris, M.B. Uday, M. Daroonparvar, A. Emadzadeh and A. Arshad, Microstructural Evaluation and Thermal Oxidation Behaviors of YSZ/NiCoCrAlYTa Coatings Deposited by Different Thermal Techniques, Ceram. Int., 2020, 46(14), p 22438–22451.10.1016/j.ceramint.2020.06.001 ↗
11. J. Cao, K. Gao, X. Yu Cao and B. Jiang, Thermal Shock Behavior of a 8YSZ/CoCrAlYTaSi Thermal Sprayed Barrier Coating on GH202 Superalloy, Ceram. Int., 2020, 46(6), p 7489–7498.10.1016/j.ceramint.2019.11.247 ↗
12. M. Daroonparvar, M.A.M. Yajid, C.M. Kay, H. Bakhsheshi-Rad, R.K. Gupta, N.M. Yusof, H. Ghandvar, A. Arshad and I.S.M. Zulkifli, Effects of Al2O3 Diffusion Barrier Layer (Including Y-Containing Small Oxide Precipitates) and Nanostructured YSZ Top Coat on the Oxidation Behavior of HVOF NiCoCrAlTaY/APS YSZ Coatings at 1100 °C, Corros. Sci., 2017, 2018(144), p 13–34.
13. X.Q. Cao, R. Vassen, W. Jungen, S. Schwartz, F. Tietz and D. Stöver, Thermal Stability of Lanthanum Zirconate Plasma-Sprayed Coating, J. Am. Ceram. Soc., 2004, 84(9), p 2086–2090.10.1111/j.1151-2916.2001.tb00962.x ↗
14. X.Q. Cao, R. Vassen and D. Stoever, Ceramic Materials for Thermal Barrier Coatings, J. Eur. Ceram. Soc., 2004, 24(1), p 1–10.10.1016/S0955-2219(03)00129-8 ↗
15. X.Q. Cao, R. Vassen, F. Tietz and D. Stoever, New Double-Ceramic-Layer Thermal Barrier Coatings Based on Zirconia-Rare Earth Composite Oxides, J. Eur. Ceram. Soc., 2006, 26(3), p 247–251.10.1016/j.jeurceramsoc.2004.11.007 ↗
16. E. Bakan and R. Vaßen, Ceramic Top Coats of Plasma-Sprayed Thermal Barrier Coatings: Materials, Processes, and Properties, J. Therm. Spray Technol., 2017, 26(6), p 992–1010.10.1007/s11666-017-0597-7 ↗
17. Y. Zhang, M. Xie, F. Zhou, X. Cui, X. Lei, X. Song and S. An, Low Thermal Conductivity in La2Zr2O7 Pyrochlore with A-Site Partially Substituted with Equimolar Yb2O3 and Er2O3, Ceram. Int., 2014, 40(7), p 9151–9157. https://doi.org/10.1016/j.ceramint.2014.01.13010.1016/j.ceramint.2014.01.130 ↗
18. R. Vaßen, M.O. Jarligo, T. Steinke, D.E. Mack, D. Stöver, R. Vassen, M.O. Jarligo, T. Steinke, D.E. Mack, D. Stover, R. Vaßen and D. Stöver, Overview on Advanced Thermal Barrier Coatings, Surf. Coat. Technol., 2010, 205(4), p 938–942. https://doi.org/10.1016/j.surfcoat.2010.08.15110.1016/j.surfcoat.2010.08.151 ↗
19. W.R. Chen, X. Wu, B.R. Marple and P.C. Patnaik, Oxidation and Crack Nucleation/Growth in an Air-Plasma-Sprayed Thermal Barrier Coating with NiCrAlY Bond Coat, Surf. Coat. Technol., 2005, 197(1), p 109–115.10.1016/j.surfcoat.2004.06.027 ↗
20. W.R. Chen, X. Wu, B.R. Marple and P.C. Patnaik, The Growth and Influence of Thermally Grown Oxide in a Thermal Barrier Coating, Surf. Coat. Technol., 2006, 201(3–4), p 1074–1079.10.1016/j.surfcoat.2006.01.023 ↗
21. M. Daroonparvar, Effects of Bond Coat and Top Coat ( Including Nano Zones ) Structures on Morphology and Type of Formed Transient Stage Oxides at Pre-Heat Treated Nano NiCrAlY / Nano ZrO 2-8 % Y2O3 Interface during Oxidation, J. Rare Earths, Chin. Soc. Rare Earths, 2015, 33(9), p 983–994. https://doi.org/10.1016/S1002-0721(14)60516-010.1016/S1002-0721(14)60516-0 ↗
22. M. Daroonparvar, M. Azizi Mat Yajid, N.M. Yusof and M. Sakhawat Hussain, Improved Thermally Grown Oxide Scale in Air Plasma Sprayed NiCrAlY/Nano-YSZ Coatings, J. Nanomater., 2013, 2013, p 1–9. https://doi.org/10.1155/2013/52010410.1155/2013/520104 ↗
23. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier and F.S. Pettit, Mechanisms Controlling the Durability of Thermal Barrier Coatings, Prog. Mater. Sci., 2001, 46(5), p 505–553. https://doi.org/10.1016/S0079-6425(00)00020-710.1016/S0079-6425(00)00020-7 ↗
24. M. Matsumoto, T. Kato, K. Hayakawa, N. Yamaguchi, S. Kitaoka and H. Matsubara, The Effect of Pre-Oxidation Atmosphere on the Durability of EB-PVD Thermal Barrier Coatings with CoNiCrAlY Bond Coats, Surf. Coat. Technol., 2008, 202(12), p 2743–2748.10.1016/j.surfcoat.2007.10.001 ↗
25. L.Y. Lim and S.A. Meguid, Thermomechanical Simulations of the Transient Coupled Effect of Thermal Cycling and Oxidation on Residual Stresses in Thermal Barrier Coatings, Ceram. Int., 2022, 48(3), p 3133–3147.10.1016/j.ceramint.2021.10.087 ↗
26. W.R. Chen, X. Wu, B.R. Marple, R.S. Lima and P.C. Patnaik, Pre-Oxidation and TGO Growth Behaviour of an Air-Plasma-Sprayed Thermal Barrier Coating, Surf. Coat. Technol., 2008, 202(16), p 3787–3796.10.1016/j.surfcoat.2008.01.021 ↗
27. G. An, W. Li, L. Feng, B. Cheng, Z. Wang, Z. Li and Y. Zhang, Isothermal Oxidation and TGO Growth Behaviors of YAG/YSZ Double-Ceramic-Layer Thermal Barrier Coatings, Ceram. Int., 2021 https://doi.org/10.1016/j.ceramint.2021.05.14410.1016/j.ceramint.2021.05.144 ↗
28. K.M. Doleker, Y. Ozgurluk and A.C. Karaoglanli, TGO Growth and Kinetic Study of Single and Double Layered TBC Systems, Surf. Coat. Technol., 2021, 415(March), p 127135. https://doi.org/10.1016/j.surfcoat.2021.12713510.1016/j.surfcoat.2021.127135 ↗
29. J. Toscano, R. Vaen, A. Gil, M. Subanovic, D. Naumenko, L. Singheiser and W.J. Quadakkers, Parameters Affecting TGO Growth and Adherence on MCrAlY-Bond Coats for TBC’s, Surf. Coat. Technol., 2006, 201(7 SPEC. ISS.), p 3906–3910.10.1016/j.surfcoat.2006.07.247 ↗
30. M. Nejati, M.R. Rahimipour and I. Mobasherpour, Evaluation of Hot Corrosion Behavior of CSZ, CSZ/Micro Al2O3 and CSZ/Nano Al2O3 Plasma Sprayed Thermal Barrier Coatings, Ceram. Int., 2014, 40(3), p 4579–4590. https://doi.org/10.1016/j.ceramint.2013.08.13510.1016/j.ceramint.2013.08.135 ↗
31. F. Zhou, Y. Wang, Z. Cui, J. Gou, Q. Zhang, C. Wang, L. Wang, J. Gou, Q. Zhang, C. Wang, L. Wang, J. Gou, Q. Zhang and C. Wang, Thermal Cycling Behavior of Nanostructured 8YSZ, SZ/8YSZ and 8CSZ/8YSZ Thermal Barrier Coatings Fabricated by Atmospheric Plasma Spraying, Ceram. Int., 2016, 43(October), p 0–1. https://doi.org/10.1016/j.ceramint.2016.12.01410.1016/j.ceramint.2016.12.014 ↗
32. H.X. Wu, Z. Ma, L. Liu, Y.B. Liu and D.Y. Wang, Thermal Cycling Behavior and Bonding Strength of Single-Ceramic-Layer Sm2Zr2O7 and Double-Ceramic-Layer Sm2Zr2O7/8YSZ Thermal Barrier Coatings Deposited by Atmospheric Plasma Spraying, Ceram. Int., 2016, 42, p 12922–12927. https://doi.org/10.1016/j.ceramint.2016.05.06210.1016/j.ceramint.2016.05.062 ↗
33. X. Wang, S. Guo, L. Zhao, Y. Zhu and L. Ai, A Novel Thermal Barrier Coating for High-Temperature Applications, Ceram. Int., 2016, 42, p 2648–2653.10.1016/j.ceramint.2015.10.071 ↗
34. Z. Liu, W. Zhang, J. Ouyang and Y. Zhou, Novel Double-Ceramic-Layer (La0.8Eu0.2)2Zr2O7/YSZ Thermal Barrier Coatings Deposited by Plasma Spraying, Ceram. Int., 2014, 40(7), p 11277–11282. https://doi.org/10.1016/j.ceramint.2014.03.15910.1016/j.ceramint.2014.03.159 ↗
35. G. Di Girolamo, F. Marra, C. Blasi, M. Schioppa, G. Pulci, E. Serra and T. Valente, High-Temperature Mechanical Behavior of Plasma Sprayed Lanthanum Zirconate Coatings, Ceram. Int., 2014, 40(7 PART B), p 11433–11436.10.1016/j.ceramint.2014.03.110 ↗
36. M.G. Gok and G. Goller, Production and Characterisation of GZ / CYSZ Alternative Thermal Barrier Coatings with Multilayered and Functionally Graded Designs, J. Eur. Ceram. Soc., 2016, 36(7), p 1755–1764.10.1016/j.jeurceramsoc.2016.01.036 ↗
37. H. Zhou and D. Yi, Effect of Rare Earth Doping on Thermo-Physical Properties of Lanthanum Zirconate Ceramic for Thermal Barrier Coatings, J. Rare Earths, 2008, 26, p 770–774.10.1016/S1002-0721(09)60002-8 ↗
38. M. Nejati, M.R. Rahimipour, I. Mobasherpour and A.H. Pakseresht, Microstructural Analysis and Thermal Shock Behavior of Plasma Sprayed Ceria-Stabilized Zirconia Thermal Barrier Coatings with Micro and Nano Al2O3 as a Third Layer, Surf. Coat. Technol., 2015, 282, p 129–138. https://doi.org/10.1016/j.surfcoat.2015.10.03010.1016/j.surfcoat.2015.10.030 ↗
39. L. Wang, Y. Wang, X.G. Sun, J.Q. He, Z.Y. Pan and C.H. Wang, Thermal Shock Behavior of 8YSZ and Double-Ceramic-Layer La2Zr2O7/8YSZ Thermal Barrier Coatings Fabricated by Atmospheric Plasma Spraying, Ceram. Int., 2012, 38(5), p 3595–3606.10.1016/j.ceramint.2011.12.076 ↗
40. R. Ahmadi-Pidani, R. Shoja-Razavi, R. Mozafarinia and H. Jamali, Improving the Thermal Shock Resistance of Plasma Sprayed CYSZ Thermal Barrier Coatings by Laser Surface Modification, Opt. Lasers Eng., 2012, 50(5), p 780–786.10.1016/j.optlaseng.2011.12.007 ↗
41. J.H. Lee, P.C. Tsai and C.L. Chang, Microstructure and Thermal Cyclic Performance of Laser-Glazed Plasma-Sprayed Ceria-Yttria-Stabilized Zirconia Thermal Barrier Coatings, Surf. Coat. Technol., 2008, 202(22–23), p 5607–5612. https://doi.org/10.1016/j.surfcoat.2008.06.11810.1016/j.surfcoat.2008.06.118 ↗
42. G. Di Girolamo, F. Marra, M. Schioppa, C. Blasi, G. Pulci and T. Valente, Evolution of Microstructural and Mechanical Properties of Lanthanum Zirconate Thermal Barrier Coatings at High Temperature, Surf. Coat. Technol., 2015, 268, p 298–302. https://doi.org/10.1016/j.surfcoat.2014.07.06710.1016/j.surfcoat.2014.07.067 ↗
43. A. Arshad, M.A.M. Yajid and M.H. Idris, Microstructural Characterization of Modified Plasma Spray LZ/YSZ Thermal Barrier Coating by Laser Glazing, Mater. Today Proc., 2021, 39, p 941–946. https://doi.org/10.1016/j.matpr.2020.04.14510.1016/j.matpr.2020.04.145 ↗
44. S.Q. Xu, C. Zhu and Y. Zhang, Effects of Laser Remelting and Oxidation on NiCrAlY/8Y2O3-ZrO2 Thermal Barrier Coatings, J. Therm. Spray Technol., 2018, 27(3), p 412–422.10.1007/s11666-017-0679-6 ↗
45. F. Cernuschi, Can TBC Porosity Be Estimated by Non-Destructive Infrared Techniques? A Theoretical and Experimental Analysis, Surf. Coat. Technol., 2015, 272, p 387–394. https://doi.org/10.1016/j.surfcoat.2015.03.03610.1016/j.surfcoat.2015.03.036 ↗
46. M.G. Gok and G. Goller, Microstructural Evaluation of Laser Remelted Gadolinium Zirconate Thermal Barrier Coatings, Surf. Coat. Technol., 2015, 276, p 202–209. https://doi.org/10.1016/j.surfcoat.2015.06.07410.1016/j.surfcoat.2015.06.074 ↗
47. G. Antou, G. Montavon, F. Hlawka, A. Cornet, C. Coddet and F. Machi, Modification of Ceramic Thermal Spray Deposit Microstructures Implementing in Situ Laser Remelting, Surf. Coat. Technol., 2003, 172(2–3), p 279–290.10.1016/S0257-8972(03)00431-6 ↗
48. H.L. Tsai and P.C. Tsai, Laser Glazing of Plasma-Sprayed Zirconia Coatings, J. Mater. Eng. Perform., 1998, 7(2), p 258–264.10.1361/105994998770347990 ↗
49. R. Ghasemi, R. Shoja-Razavi, R. Mozafarinia, H. Jamali, M. Hajizadeh-Oghaz and R. Ahmadi-Pidani, The Influence of Laser Treatment on Hot Corrosion Behavior of Plasma-Sprayed Nanostructured Yttria Stabilized Zirconia Thermal Barrier Coatings, J. Eur. Ceram. Soc., 2014, 34(8), p 2013–2021. https://doi.org/10.1016/j.jeurceramsoc.2014.01.03110.1016/j.jeurceramsoc.2014.01.031 ↗
50. M.F. Morks, C.C. Berndt, Y. Durandet, M. Brandt and J. Wang, Microscopic Observation of Laser Glazed Yttria-Stabilized Zirconia Coatings, Appl. Surf. Sci., 2010, 256(21), p 6213–6218. https://doi.org/10.1016/j.apsusc.2010.03.14310.1016/j.apsusc.2010.03.143 ↗
51. C. Zhu, A. Javed, P. Li, F. Yang, G.Y. Liang and P. Xiao, A Study of the Microstructure and Oxidation Behavior of Alumina/Yttria-Stabilized Zirconia (Al2O3/YSZ) Thermal Barrier Coatings, Surf. Coat. Technol., 2012, 212, p 214–222.10.1016/j.surfcoat.2012.09.052 ↗
52. J. Sure, A.R. Shankar and U.K. Mudali, Surface Modification of Plasma Sprayed Al2O3-40 Wt.% TiO2 Coatings by Pulsed Nd:YAG Laser Melting, Opt. Laser Technol., 2013, 48, p 366–374.10.1016/j.optlastec.2012.09.025 ↗
53. R. Wang, T. Dong, Y. Di, H. Wang, G. Li and L. Liu, High Temperature Oxidation Resistance and Thermal Growth Oxides Formation and Growth Mechanism of Double-Layer Thermal Barrier Coatings, J. Alloys Compd., 2019, 798, p 773–783. https://doi.org/10.1016/j.jallcom.2019.05.05210.1016/j.jallcom.2019.05.052 ↗
54. M. Daroonparvar, M.A.M. Yajid, N.M. Yusof, M.S. Hussain and H.R.B. Rad, Formation of a Dense and Continuous Al2O3 Layer in Nano Thermal Barrier Coating Systems for the Suppression of Spinel Growth on the Al2O3 Oxide Scale during Oxidation, J. Alloys Compd., 2013, 571, p 205–220.10.1016/j.jallcom.2013.03.168 ↗
55. W.R. Chen, X. Wu, D. Dudzinski and P.C. Patnaik, Modification of Oxide Layer in Plasma-Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 2006, 200(20–21), p 5863–5868.10.1016/j.surfcoat.2005.08.141 ↗
56. C. Zhao, M. Zhao, M. Shahid, M. Wang and W. Pan, Restrained TGO Growth in YSZ/NiCrAlY Thermal Barrier Coatings by Modified Laser Remelting, Surf. Coat. Technol., 2017, 309, p 1119–1125. https://doi.org/10.1016/j.surfcoat.2016.05.01510.1016/j.surfcoat.2016.05.015 ↗
57. M. Saremi, A. Afrasiabi and A. Kobayashi, Microstructural Analysis of YSZ and YSZ/Al2O3 Plasma Sprayed Thermal Barrier Coatings after High Temperature Oxidation, Surf. Coat. Technol., 2008, 202(14), p 3233–3238.10.1016/j.surfcoat.2007.11.029 ↗
58. L.C. Driver, HVOF Spraying of WC-Co & MCrAlY Coatings for Aeroengine Components. University of Nottingham, (2004)
59. Y. Tamarin, Protective Coating for Turbine Blades, ASM International, New York, 2002, p 247
60. L. Zhang, W. Fan, Y. Wang, K. Liu, Z.Z. Wang and Y. Bai, Oxidation Resistance of Plasma - Sprayed Double—Layered LC / YSZ Coatings with Different Thickness Ratios at High Temperatures, Oxid. Met., 2020, 94(0123456789), p 12.
61. W.R. Chen, X. Wu, B.R. Marple, D.R. Nagy and P.C. Patnaik, TGO Growth Behaviour in TBCs with APS and HVOF Bond Coats, Surf. Coat. Technol., 2008, 202(12), p 2677–2683.10.1016/j.surfcoat.2007.09.042 ↗
62. M.S. Ahmadi, R. Shoja-Razavi, Z. Valefi and H. Jamali, The Effect of Laser Surface Treatment on the Thermal Shock Behavior of Plasma Sprayed Al2O3 /YSZ Multilayer Thermal Barrier Coatings, Surf. Coat. Technol., 2019, 366(January), p 62–69.10.1016/j.surfcoat.2019.03.024 ↗
63. C. Zhu, P. Li, A. Javed, G.Y. Liang and P. Xiao, An Investigation on the Microstructure and Oxidation Behavior of Laser Remelted Air Plasma Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 2012, 206(18), p 3739–3746.10.1016/j.surfcoat.2012.03.026 ↗
64. H. Chen, Y. Hao, H. Wang and W. Tang, Analysis of the Microstructure and Thermal Shock Resistance of Laser Glazed Nanostructured Zirconia TBCs, J. Therm. Spray Technol., 2010, 19(3), p 558–565.10.1007/s11666-009-9463-6 ↗
65. S. Nath, I. Manna and J.D. Majumdar, Kinetics and Mechanism of Isothermal Oxidation of Compositionally Graded Yttria Stabilized Zirconia (YSZ) Based Thermal Barrier Coating, Corros. Sci., 2014, 88, p 10–22.10.1016/j.corsci.2014.06.050 ↗
66. J. Shi, T. Zhang, B. Sun, B. Wang, X. Zhang and L. Song, Isothermal Oxidation and TGO Growth Behavior of NiCoCrAlY-YSZ Thermal Barrier Coatings on a Ni-Based Superalloy, J. Alloys Compd., 2020, 844, p 156093. https://doi.org/10.1016/j.jallcom.2020.15609310.1016/j.jallcom.2020.156093 ↗
67. L.Y. Ni, C. Liu, H. Huang and C.G. Zhou, Thermal Cycling Behavior of Thermal Barrier Coatings with HVOF NiCrAlY Bond Coat, J. Therm. Spray Technol., 2011, 20(5), p 1133–1138. https://doi.org/10.1007/s11666-011-9647-810.1007/s11666-011-9647-8 ↗
68. S. Cruchley, H.E. Evans, M.P. Taylor, M.C. Hardy and S. Stekovic, Chromia Layer Growth on a Ni-Based Superalloy: Sub-Parabolic Kinetics and the Role of Titanium, Corros. Sci., 2013, 75, p 58–66. https://doi.org/10.1016/j.corsci.2013.05.01610.1016/j.corsci.2013.05.016 ↗
69. S. Zhou, Z. Xiong, J. Lei, X. Dai, T. Zhang and C. Wang, Influence of Milling Time on the Microstructure Evolution and Oxidation Behavior of NiCrAlY Coatings by Laser Induction Hybrid Cladding, Corros. Sci., 2016, 103, p 105–116.10.1016/j.corsci.2015.11.011 ↗
70. L. Zheng, M.C. Zhang, R. Chellali, H. Bouchikhaoui and J.X. Dong, Oxidation Property of Powder Metallurgy EP741NP Ni Based Superalloy at Elevated Temperatures, Mater. Technol., 2013, 28(3), p 122–128.10.1179/1753555712Y.0000000030 ↗