RETRACTED ARTICLE: Structure and Mechanical Properties of Thick Copper Coating Made by Cold Spray
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Source abstract
Abstract
The main purpose of this study was to form cold-sprayed copper coatings on A 516 low carbon steel, which is considered a prospective material for manufacturing used nuclear fuel containers. The 3 mm-thick Cu coatings were formed using the high pressure cold spray method with Nitrogen as the propellant gas. The deformation of copper particles during the deposition process was studied. The obtained SEM images of the Cu layer-A 516 low carbon steel substrate interface cross sections demonstrated that the Cu layer at the substrate interface had a dense microstructure with localized jet-metallic mixing areas. The Cu particles were deformed considerably more severely in this layer than in the consequently deposited upper layers. The steel substrate underwent severe deformation due to the impact of Cu particles. The mutual severe deformation of Cu particles and steel substrate resulted in a considerable increase of adhesion strength up to 120 MPa. The structure of coatings and coating-substrate interface was studied.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Materials Engineering and Processing · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Ch Lee and J. Kim, Microstructure of Kinetic Spray Coatings: A Review, J. Thermal Spray Technol., 2015, 24(4), p 592-61010.1007/s11666-015-0223-5 ↗
2. M.R. Rokni, C.A. Widener, and V.R. Champagne, Microstructural Evolution of 6061 Aluminum Gas-Atomized Powder and High-Pressure Cold-Sprayed Deposition, J. Thermal Spray Technol., 2014, 23(3), p 514-52410.1007/s11666-013-0049-y ↗
3. C. Borchers, F. Gartner, T. Stoltenhoff, and H. Kreye, Formation of Persistent Dislocation Loops by Ultra-High Strain-Rate Deformation During Cold Spraying, Acta Mater., 2005, 53, p 2991-300010.1016/j.actamat.2005.02.048 ↗
4. Y. Zou, W. Qin, E. Irissou, J.G. Legoux, S. Yue, and J.A. Szpunar, Dynamic Recrystallization in the Particle/Particle Interfacial Region of Cold-Sprayed Nickel Coating: Electron Backscatter Diffraction Characterization, Scripta Mater., 2009, 61, p 899-90210.1016/j.scriptamat.2009.07.020 ↗
5. Y. Zou, D. Goldbaum, J.A. Szpunar, and S. Yue, Microstructure and Nanohardness of Cold-Sprayed Coatings: Electron Backscattered Diffraction and Nanoindentation Studies, Scripta Mater., 2010, 62, p 395-39810.1016/j.scriptamat.2009.11.034 ↗
6. X. Wang, J. Zhao, and J. He, Investigation on the Microstructure and Mechanical Properties of the Spray-Formed Cu-Cr Alloys, Mater. Sci. Eng. A, 2007, 460-461, p 69-7610.1016/j.msea.2007.01.023 ↗
7. S.R. Bakshi, V. Singh, K. Balani, D.G. McCartney, S. Seal, and A. Agarwal, Carbon Nanotube Reinforced Aluminum Composite Coating via Cold Spraying, Surf. Coat. Technol., 2008, 202, p 5162-516910.1016/j.surfcoat.2008.05.042 ↗
8. Q. Wang, N. Birbilis, and M.X. Zhang, Interfacial Structure between Particles in an Aluminum Deposit Produced by Cold Spray, Mater. Lett., 2011, 65, p 1576-157810.1016/j.matlet.2011.03.035 ↗
9. P.D. Eason, J.A. Fewkes, S.C. Kennett, T.J. Eden, K. Tello, M.J. Kaufman, and M. Tiryakioglu, On the Characterization of Bulk Copper Produced by Cold Gas Dynamic Spray Processing in the As-fabricated and Annealed Conditions, Mater. Sci. Eng. A, 2001, 528, p 8174-817810.1016/j.msea.2011.07.012 ↗
10. Y.Y. Zhang and J.S. Zhang, Recrystallization in the Particles Interfacial Region of the Cold-Sprayed Aluminum Coating: Strain-Induced Boundary Migration, Mater. Lett., 2011, 65, p 1856-185810.1016/j.matlet.2011.04.014 ↗
11. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Spraying, Acta Mater., 2003, 51, p 4379-439410.1016/S1359-6454(03)00274-X ↗
12. T. Schmidt, F. Gartner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54, p 729-74210.1016/j.actamat.2005.10.005 ↗
13. T. Schmidt, F. Gartner, and H. Kreye, New Developments in Cold Spray Based on Higher Gas and Particle Temperatures, J. Therm. Spray Technol., 2006, 15, p 488-49410.1361/105996306X147144 ↗
14. A. Papyrin, V. Kosarev, S. Klinkov, and A. Alkhimov, Cold Spray Technology, Elsevier, Oxford, 2006, p 125-210
15. V.K. Champagne, Ed., The Cold Spray Materials Deposition Process: Fundamentals and Applications, Woodhead Publishing Limited, Cambridge, 2007, p 230-312
16. R. Gr, Maev, Volf Leshchynsky, Introduction to Low Pressure Gas Dynamic Spray, Willey, 2007, p 190–20710.1002/9783527621903 ↗
17. J.A. Pineault, M. Belassel, and M.E. Brauss, X-ray Diffraction Residual Stress Measurement in Failure Analysis. ASM Handbook, Vol 11, ASM International, Materials Park, 2002, p 484-497
18. Hibbitt, Karlsson, and Soerensen, ABAQUS/Explicit 6.9-1 Manual, Pawtucket, RI, 2002
19. R. Huang and H. Fukanuma, Study of the Influence of Particle Velocity on Adhesive Strength of Cold Spray Deposits, J. Therm. Spray Technol., 2012, 21(3-4), p 541-54910.1007/s11666-011-9707-0 ↗
20. C. Borchers, F. Gartner, T. Stoltenhoff, and H. Kreye, Microstructural Bonding Features of Cold Sprayed Face Centered Cubic Metals, J. Appl. Phys., 2004, 8, p 4288-429210.1063/1.1789278 ↗
21. V.K. Champagne, D. Helfritch, P. Leyman, S. Grendahl, and B. Klotz, Interface Material Mixing Formed by the Deposition of Copper on Aluminum by Means of the Cold Spray Process, J. Therm. Spray Technol., 2005, 14(3), p 330-33410.1361/105996305X59332 ↗
22. S. Dumek, M. Blicharski, J. Morgiel, and E. Fras, TEM Investigation of Ductile Iron Alloyed with Vanadium, J. Microsc., 2010, 237(3), p 461-46410.1111/j.1365-2818.2009.03294.x ↗