Cohesion of Dissimilar Splats in Hybrid Plasma-Sprayed Coatings: A Case Study for Al2O3-TiO2
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. S. Bjorklund, S. Goel and S. Joshi, Function-Dependent Coating Architectures by Hybrid Powder-Suspension Plasma Spraying: Injector Design, Processing and Concept Validation, Mater. Des., 2018, 142, p 56–65.10.1016/j.matdes.2018.01.002 ↗
2. S.V. Joshi and G. Sivakumar, Hybrid Processing with Powders and Solutions: A Novel Approach to Deposit Composite Coatings, J. Therm. Spray Technol., 2015, 24(7), p 1166–1186.10.1007/s11666-015-0262-y ↗
3. S.V. Joshi, G. Sivakumar, T. Raghuveer and R.O. Dusane, Hybrid Plasma-Sprayed Thermal Barrier Coatings Using Powder and Solution Precursor Feedstock, J. Therm. Spray Technol., 2014, 23(4), p 616–624.10.1007/s11666-014-0075-4 ↗
4. A. Lohia, G. Sivakumar, M. Ramakrishna and S.V. Joshi, Deposition of Nanocomposite Coatings Employing a Hybrid APS + SPPS Technique, J. Therm. Spray Technol., 2014, 23(7), p 1054–1064.10.1007/s11666-014-0071-8 ↗
5. J.W. Murray, A. Leva, S. Joshi and T. Hussain, Microstructure and Wear Behaviour of Powder and Suspension Hybrid Al2O3–YSZ Coatings, Ceram. Int., 2018, 44(7), p 8498–8504.10.1016/j.ceramint.2018.02.048 ↗
6. E.H. Jordan, C. Jiang and M. Gell, The Solution Precursor Plasma Spray (SPPS) Process: A Review with Energy Considerations, J. Therm. Spray Technol., 2015, 24(7), p 1153–1165.10.1007/s11666-015-0272-9 ↗
7. G. Mauer, R. Vassen and D. Stover, Comparison and Applications of DPV-2000 and Accuraspray-G3 Diagnostic Systems, J. Therm. Spray Technol., 2007, 16(3), p 414–424.10.1007/s11666-007-9047-2 ↗
8. O. Marchand, L. Girardot, M.P. Planche, P. Bertrand, Y. Bailly and G. Bertrand, An Insight into Suspension Plasma Spray: Injection of the Suspension and Its Interaction with the Plasma Flow, J. Therm. Spray Technol., 2011, 20(6), p 1310–1320.10.1007/s11666-011-9682-5 ↗
9. G. Sivakumar, S. Banerjee, V.S. Raja and S.V. Joshi, Hot Corrosion Behavior of Plasma Sprayed Powder-Solution Precursor Hybrid Thermal Barrier Coatings, Surf. Coatings Technol., 2018, 349, p 452–461.10.1016/j.surfcoat.2018.06.021 ↗
10. S. Mahade, S. Bjorklund, S. Govindarajan, M. Olsson and S. Joshi, Novel Wear Resistant Carbide-Laden Coatings Deposited by Powder-Suspension Hybrid Plasma Spray: Characterization and Testing, Surf. Coatings Technol., 2020, 399, p 126147.10.1016/j.surfcoat.2020.126147 ↗
11. M. Mistri, S. Joshi, K.K. Kar and K. Balani, Tribomechanical Insight into Carbide-Laden Hybrid Suspension-Powder Plasma-Sprayed Tribaloy T400 Composite Coatings, Surf. Coatings Technol., 2020, 396, p 125957.10.1016/j.surfcoat.2020.125957 ↗
12. G. Bolelli, A. Candeli, L. Lusvarghi, A. Ravaux, K. Cazes, A. Denoirjean, S. Valette, C. Chazelas, E. Meillot and L. Bianchi, Tribology of NiCrAlY+Al2O3 Composite Coatings by Plasma Spraying with Hybrid Feeding of Dry Powder+suspension, Wear, 2015, 344–345, p 69–85.10.1016/j.wear.2015.10.014 ↗
13. G. Bolelli, A. Candeli, L. Lusvarghi, T. Manfredini, A. Denoirjean, S. Valette, A. Ravaux and E. Meillot, “Hybrid” Plasma Spraying of NiCrAlY+Al2O3+h-BN Composite Coatings for Sliding Wear Applications, Wear, 2017, 378–379, p 68–81.10.1016/j.wear.2017.02.027 ↗
14. V. Gopal, S. Goel, G. Manivasagam and S. Joshi, Performance of Hybrid Powder-Suspension Axial Plasma Sprayed Al2O3-YSZ Coatings in Bovine Serum Solution, Materials, 2019, 12(12), p 18.10.3390/ma12121922 ↗
15. J. Kiilakoski, J. Puranen, E. Heinonen, H. Koivuluoto and P. Vuoristo, Characterization of Powder-Precursor HVOF-Sprayed Al2O3 -YSZ/ZrO2 Coatings, J. Therm. Spray Technol., 2019, 28(1–2), p 98–107.10.1007/s11666-018-0816-x ↗
16. G.-J. Yang, C.-X. Li, S. Hao, Y.-Z. Xing, E.-J. Yang and C.-J. Li, Critical Bonding Temperature for the Splat Bonding Formation during Plasma Spraying of Ceramic Materials, Surf. Coatings Technol., 2013, 235, p 841–847.10.1016/j.surfcoat.2013.09.010 ↗
17. L. Li, X.Y. Wang, G. Wei, A. Vaidya, H. Zhang and S. Sampath, Substrate Melting during Thermal Spray Splat Quenching, Thin Solid Films, 2004, 468(1–2), p 113–119.10.1016/j.tsf.2004.05.073 ↗
18. S. Chandra and P. Fauchais, Formation of Solid Splats during Thermal Spray Deposition, J. Therm. Spray Technol., 2009, 18(2), p 148–180.10.1007/s11666-009-9294-5 ↗
19. C.-J. Li, C.-X. Li, G.-J. Yang and Y.-Y. Wang, Examination of Substrate Surface Melting-Induced Splashing during Splat Formation in Plasma Spraying, J. Therm. Spray Technol., 2006, 15(4), p 717–724.10.1361/105996306X146947 ↗
20. R.K. Shukla and A. Kumar, Substrate Melting and Re-Solidification During Impact of High-Melting Point Droplet Material, J. Therm. Spray Technol., 2015, 24(8), p 1368–1376.10.1007/s11666-015-0326-z ↗
21. S.-W. Yao, C.-J. Li, J.-J. Tian, G.-J. Yang and C.-X. Li, Conditions and Mechanisms for the Bonding of a Molten Ceramic Droplet to a Substrate after High-Speed Impact, Acta Mater., 2016, 119, p 9–25.10.1016/j.actamat.2016.07.057 ↗
22. S.-W. Yao, J.-J. Tian, C.-J. Li, G.-J. Yang and C.-X. Li, Understanding the Formation of Limited Interlamellar Bonding in Plasma Sprayed Ceramic Coatings Based on the Concept of Intrinsic Bonding Temperature, J. Therm. Spray Technol., 2016, 25(8), p 1617–1630.10.1007/s11666-016-0464-y ↗
23. M. Michalak, L. Łatka, P. Sokołowski, A. Niemiec and A. Ambroziak, The Microstructure and Selected Mechanical Properties of Al2O3 + 13 Wt % TiO2 Plasma Sprayed Coatings, Coatings, 2020, 10(2), p 16.10.3390/coatings10020173 ↗
24. M. Michalak, F.-L. Toma, L. Latka, P. Sokolowski, M. Barbosa and A. Ambroziak, A Study on the Microstructural Characterization and Phase Compositions of Thermally Sprayed Al2O3-TiO2 Coatings Obtained from Powders and Water-Based Suspensions, Materials, 2020, 13(11), p 2638.10.3390/ma13112638 ↗
25. L.-M. Berger, K. Sempf, Y.J. Sohn and R. Vassen, Influence of Feedstock Powder Modification by Heat Treatments on the Properties of APS-Sprayed Al2O3-40% TiO2 Coatings, J. Therm. Spray Technol., 2018, 27(4), p 654–666.10.1007/s11666-018-0716-0 ↗
26. M. Vicent, E. Bannier, P. Carpio, E. Rayon, R. Benavente, M.D. Salvador and E. Sanchez, Effect of the Initial Particle Size Distribution on the Properties of Suspension Plasma Sprayed Al2O3-TiO2 Coatings, Surf. Coatings Technol., 2015, 268, p 209–215.10.1016/j.surfcoat.2014.12.010 ↗
27. L. Łatka, M. Michalak, M. Szala, M. Walczak, P. Sokołowski and A. Ambroziak, Influence of 13 Wt% TiO2 Content in Alumina-Titania Powders on Microstructure, Sliding Wear and Cavitation Erosion Resistance of APS Sprayed Coatings, Surf. Coatings Technol., 2021, 410, p 1269.10.1016/j.surfcoat.2021.126979 ↗
28. G. Darut, E. Klyatskina, S. Valette, P. Carles, A. Denoirjean, G. Montavon, H. Ageorges, F. Segovia and M. Salvador, Architecture and Phases Composition of Suspension Plasma Sprayed Alumina-Titania Sub-Micrometer-Sized Coatings, Mater. Lett., 2012, 67(1), p 241–244.10.1016/j.matlet.2011.09.096 ↗
29. E. Bannier, M. Vicent, E. Rayón, R. Benavente, M.D. Salvador and E. Sánchez, Effect of TiO2 Addition on the Microstructure and Nanomechanical Properties of Al2O3 Suspension Plasma Sprayed Coatings, Appl. Surf. Sci., 2014, 316, p 141–146.10.1016/j.apsusc.2014.07.168 ↗
30. T. Tesar, R. Musalek, F. Lukac, J. Medricky, J. Cizek, V. Rimal, S. Joshi and T. Chraska, Increasing α-Phase Content of Alumina-Chromia Coatings Deposited by Suspension Plasma Spraying Using Hybrid and Intermixed Concepts, Surf. Coatings Technol., 2019, 371, p 298–311.10.1016/j.surfcoat.2019.04.091 ↗
31. R. Musalek, J. Medricky, T. Tesar, J. Kotlan, Z. Pala, F. Lukac, K. Illkova, M. Hlina, T. Chraska, P. Sokolowski and N. Curry, Controlling Microstructure of Yttria-Stabilized Zirconia Prepared from Suspensions and Solutions by Plasma Spraying with High Feed Rates, J. Therm. Spray Technol., 2017, 26(8), p 1787–1803.10.1007/s11666-017-0622-x ↗
32. R. Musalek, G. Bertolissi, J. Medricky, J. Kotlan, Z. Pala and N. Curry, Feasibility of Suspension Spraying of Yttria-Stabilized Zirconia with Water-Stabilized Plasma Torch, Surf. Coatings Technol., 2015, 268, p 58–62.10.1016/j.surfcoat.2014.07.069 ↗
33. ASTM C633 - 13(2017) Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings, ASTM International, (2017)
34. ASTM G32 - 16 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus, ASTM International, (2016)
35. R. Musalek, E. Nardozza, T. Tesar, and J. Medricky, Evaluation of Internal Cohesion of Multiphase Plasma-Sprayed Coatings by Cavitation Test: Feasibility Study, in Acta Polytech. CTU Proc., p 73–78 (2020)10.14311/APP.2020.27.0073 ↗
36. ISO 14577-1:2015 Metallic Materials — Instrumented Indentation Test for Hardness and Materials Parameters — Part 1: Test Method, p. 46 (2015)
37. W.C. Oliver and G.M. Pharr, Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology, J. Mater. Res., 2004, 19(1), p 3–20.10.1557/jmr.2004.19.1.3 ↗
38. W.H. Gitzen, Alumina as a Ceramic Material, American Ceramic Society, p. 264 (1970)
39. P. Ctibor, V. Stengl, I. Pis, T. Zahoranova and V. Nehasil, Plasma Sprayed TiO2: The Influence of Power of an Electric Supply on Relations among Stoichiometry, Surface State and Photocatalytic Decomposition of Acetone, Ceram. Int., 2012, 38(4), p 3453–3458.10.1016/j.ceramint.2011.12.058 ↗
40. F.-L. Toma, L.-M. Berger, C.C. Stahr, T. Naumann and S. Langner, Microstructures and Functional Properties of Suspension-Sprayed Al2O3 and TiO2 Coatings: An Overview, J. Therm. Spray Technol., 2010, 19(1–2), p 262–274.10.1007/s11666-009-9417-z ↗
41. J.R. Colmenares-Angulo, V. Cannillo, L. Lusvarghi, A. Sola and S. Sampath, Role of Process Type and Process Conditions on Phase Content and Physical Properties of Thermal Sprayed TiO2 Coatings, J. Mater. Sci., 2009, 44(9), p 2276–2287.10.1007/s10853-008-3044-9 ↗
42. H. Kassner, R. Vassen and D. Stover, Study on Instant Droplet and Particle Stages during Suspension Plasma Spraying (SPS), Surf. Coatings Technol., 2008, 202(18), p 4355–4361.10.1016/j.surfcoat.2008.04.009 ↗
43. L. Pawlowski, Suspension and Solution Thermal Spray Coatings, Surf. Coatings Technol., 2009, 203(19), p 2807–2829.10.1016/j.surfcoat.2009.03.005 ↗
44. S. Kuroda and T.W. Clyne, The Quenching Stress in Thermally Sprayed Coatings, Thin Solid Films, 1991, 200(1), p 49–66.10.1016/0040-6090(91)90029-W ↗
45. R. Musalek, T. Tesar, J. Medricky, F. Lukac, T. Chraska and M. Gupta, Microstructures and Thermal Cycling Properties of Thermal Barrier Coatings Deposited by Hybrid Water-Stabilized Plasma Torch, J. Therm. Spray Technol., 2020, 29(3), p 444–461.10.1007/s11666-020-00990-2 ↗
46. P. Chraska, J. Dubsky, K. Neufuss and J. Pisacka, Alumina-Base Plasma-Sprayed Materials Part I: Phase Stability of Alumina and Alumina-Chromia, J. Therm. Spray Technol., 1997, 6(3), p 320–326.10.1007/s11666-997-0066-9 ↗
47. C.C. Stahr, S. Saaro, L.-M. Berger, J. Dubsky, K. Neufuss and M. Herrmann, Dependence of the Stabilization of α-Alumina on the Spray Process, J. Therm. Spray Technol., 2007, 16(5–6), p 822–830.10.1007/s11666-007-9107-7 ↗
48. R. Musalek, V. Pejchal, M. Vilemova and J. Matejicek, Multiple-Approach Evaluation of WSP Coatings Adhesion/Cohesion Strength, J. Therm. Spray Technol., 2012, 22(2–3), p 221–232.
49. R. Musalek, J. Matejicek, M. Vilemova and O. Kovarik, Non-Linear Mechanical Behavior of Plasma Sprayed Alumina Under Mechanical and Thermal Loading, J. Therm. Spray Technol., 2010, 19(1), p 422–428.10.1007/s11666-009-9362-x ↗
50. J. Nohava, R. Musalek, J. Matejicek and M. Vilemova, A Contribution to Understanding the Results of Instrumented Indentation on Thermal Spray Coatings — Case Study on Al2O3 and Stainless Steel, Surf. Coatings Technol., 2014, 240, p 243–249.10.1016/j.surfcoat.2013.12.033 ↗
51. L. Bianchi, A.C. Leger, M. Vardelle, A. Vardelle and P. Fauchais, Splat Formation and Cooling of Plasma-Sprayed Zirconia, Thin Solid Films, 1997, 305(1–2), p 35–47.10.1016/S0040-6090(97)80005-3 ↗
52. N.M. Rendtorff, G. Suarez and E.F. Aglietti, Non Isothermal Kinetic Study of the Aluminium Titanate Formation in Alumina-Titania Mixtures, Ceramica, 2014, 60(355), p 411–416.10.1590/S0366-69132014000300013 ↗
53. S. Goutier, M. Vardelle and P. Fauchais, Understanding of Spray Coating Adhesion through the Formation of a Single Lamella, J. Therm. Spray Technol., 2012, 21(3–4), p 522–530.10.1007/s11666-012-9763-0 ↗
54. A.T.T. Tran, M.M. Hyland, K. Shinoda and S. Sampath, Influence of Substrate Surface Conditions on the Deposition and Spreading of Molten Droplets, Thin Solid Films, 2011, 519(8), p 2445–2456.10.1016/j.tsf.2010.11.047 ↗
55. J. Wang, X.-T. Luo, C.-J. Li, N. Ma and M. Takahashi, Effect of Substrate Temperature on the Microstructure and Interface Bonding Formation of Plasma Sprayed Ni20Cr Splat, Surf. Coatings Technol., 2019, 371, p 36–46.10.1016/j.surfcoat.2019.01.085 ↗
56. M. Driouche, T. Rezoug, and M. El-Ganaoui, Effect of Droplet Initial Temperature on Substrate Melting and Its Re-Solidification in Plasma Spray Process, 2020, Lecture notes in Mechanical Engineering, p 129-13210.1007/978-3-030-24247-3_14 ↗
57. S. Oukach, H. Hamdi, M. El Ganaoui and B. Pateyron, Numerical Study of the Spreading and Solidification of a Molten Particle Impacting onto a Rigid Substrate under Plasma Spraying Conditions, Therm. Sci., 2015, 19(1), p 277–284.10.2298/TSCI120730097O ↗
58. C.-W. Kang, J.K. Tan, L. Pan, C.Y. Low and A. Jaffar, Numerical and Experimental Investigations of Splat Geometric Characteristics during Oblique Impact of Plasma Spraying, Appl. Surf. Sci., 2011, 257(24), p 10363–10372.10.1016/j.apsusc.2011.06.081 ↗