Microstructural Characterization and Oscillating Sliding Wear Investigations of the Aqueous Suspension Sprayed HVOF WC-12Co Coatings
Source abstract
Abstract
Abstract Thermally sprayed WC-based hardmetal coatings offer high hardness, good sliding wear and abrasion performance and find large applications in mechanical engineering, valve construction, or offshore applications. WC-Co coatings are mainly produced by high-velocity oxy-fuel spraying (HVOF) from conventional spray feedstock powders. In this work, suspension-HVOF spraying (S-HVOF) was used to produce dense-structured WC-12Co coatings and their microstructural, mechanical and tribological properties were investigated. Significant work was devoted to the development of appropriate aqueous suspensions starting from commercially available fine WC and Co raw powders feedstock. Suspension spraying was carried out using gas-fuelled HVOF TopGun system; for comparison purposes, liquid-fuelled HVOF K2 was employed to spray WC-12Co coatings starting from commercially available spray powder. Microstructural characterization, x-ray diffraction and microhardness of the coatings were evaluated. Oscillating sliding wear tests were conducted against sintered alumina and WC-6Co balls. The sliding wear performances of the WC-Co sprayed coatings were discussed in term of their microstructure, phase composition and coating-ball test couples.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. B. Gries, B. Brüning and S. Zimmermann, New Cermet Powders for HVOF Spraying with Improved Corrosion and Oxidation Resistance for Off-Shore, Mining and Power Generation Applications, Therm. Spray Bull., 2011, 4(2), p 94-100.
2. L.-M. Berger, Coatings by Thermal Spray, Comprehensive Hard Materials, 2014, 2014(1), p 471-506. https://doi.org/10.1016/B978-0-08-096527-7.00017-910.1016/B978-0-08-096527-7.00017-9 ↗
3. L.M. Berger and B. Wielage, Metallurgische Vorgänge beim thermischen Spritzen von Hartmetallen und deren Auswirkungen auf die Schichteigenschaften, Proc, 2012, 15, p 17-28.
4. A. Wank, B. Wielage, G. Reisel, T. Grund, Performance of thermal spray coatings under dry abrasive wear conditions, THE Coatings, 2004, 4, Erlangen
5. B. Wielage, A. Wank, H. Pokhmurska, E. Friesen, T. Grund, and A. Schwenk, Correlation of Microstructure with Abrasion and Oscillating Wear Resistance of Thermal Spray Coatings, Thermal Spray 2005: Proc Int’l Thermal Spray Conf., Basel, Switzerland, (2005)10.31399/asm.cp.itsc2005p0868 ↗
6. A. Karaoglanli, M. Oge, K. Mert Doleker, and M. Hotamis, Comparison of Tribological Properties of HVOF Sprayed Coatings with Different Composition, Surf. Coat. Technol., 2017, 318, p 299-308. https://doi.org/10.1016/j.surfcoat.2017.02.02110.1016/j.surfcoat.2017.02.021 ↗
7. J.M. Guilemany, S. Dosta, and J.R. Miguel, The Enhancement of the Properties of WC-Co HVOF Coatings Through the Use of Nanostructured and Microstructured Feedstock Powders, Surf. Coat. Technol., 2006, 201(3-4), p 1180-1190. https://doi.org/10.1016/j.surfcoat.2006.01.04110.1016/j.surfcoat.2006.01.041 ↗
8. C. Bartuli, T. Valente, F. Cipri, E. Bemporad, and M. Tului, Parametric Study of an HVOF Process for the Deposition of Nanostructured WC-Co Coatings, J. Therm. Spray Technol., 2005, 14(2), p 187-195. https://doi.org/10.1361/1059963052374610.1361/10599630523746 ↗
9. I. Baumann, L. Hagen, W. Tillmann, P. Hollingsworth, D. Stangier, G. Schmidtmann, M. Tolan, M. Paulus, and C. Sternemann, Process Characteristics, Particle Behavior and Coating Properties During HVOF Spraying of Conventional, Fine and Nanostructured WC-12Co Powders, Surf. Coat Technol., 2020, 405, p 126719. https://doi.org/10.1016/j.surfcoat.2020.12671610.1016/j.surfcoat.2020.126716 ↗
10. M. Karhu, J. Lagerbom, K. Kaunisto, T. Suhonen, T. Lindroos, and E. Turunen, Nanostructural WC-Co coatings by utilizing novel powder manufacturing route using water soluble raw materials, Proc. Int’l Thermal Spray Conf. (ITSC) Düsseldorf, Germany, 451-455 (2018)10.31399/asm.cp.itsc2017p0451 ↗
11. J. He and J.M. Schoenung, A Review on Nanostructured WC-Co Coatings, Surf. Coat. Technol., 2002, 157(1), p 72-79. https://doi.org/10.1016/S0257-8972(02)00141-X10.1016/S0257-8972(02)00141-X ↗
12. A. Wank, B. Wielage, H. Pokhmurska, E. Friesen, and G. Reisel, Comparison of Hardmetal and Hard Chromium Coatings Under Different Tribological Conditions, Surf. Coat. Technol., 2006, 201, p 1975-1980. https://doi.org/10.1016/j.surfcoat.2006.04.05810.1016/j.surfcoat.2006.04.058 ↗
13. T.E. Fischer, et al., The effects of feedstock powder and deposition technique on the hardness and tribological performance of thermal-sprayed WC-Co coatings, In Thermal Sprayed Coatings and their Tribological Performance (IGI Global) 1-24 (2015)10.4018/978-1-4666-7489-9.ch001 ↗
14. P.H. Shipway, D.G. McCartney, and T. Sudaprasert, Sliding Wear Behaviour of Conventional and Nanostructured HVOF Sprayed WC-Co Coatings, Wear, 2005, 259(7-12), p 820-827. https://doi.org/10.1016/j.wear.2005.02.05910.1016/j.wear.2005.02.059 ↗
15. W. Tillmann, J. Nebel, and W. Piotrowski, Influence of Fine Powder Feedstock (-10 + 2 µm) on the HVOF Spraying Characteristics, Coating Morphology, and Properties of WC-CoCr 86-10-4, J. Therm. Spray Technol., 2013, 22(2-3), p 242-249. https://doi.org/10.1007/s11666-012-9832-410.1007/s11666-012-9832-4 ↗
16. P. Chivavibul, M. Watanabe, S. Kuroda, and K. Shinoda, Effects of Carbide Size and Co Content on the Microstructure and Mechanical Properties of HVOF-Sprayed WC-Co Coatings, Surf. Coat. Technol., 2007, 202(3), p 509-521. https://doi.org/10.1016/j.surfcoat.2007.06.02610.1016/j.surfcoat.2007.06.026 ↗
17. C.-J. Li and G.-J. Yang, Relationships Between Feedstock Structure, Particle Parameter, Coating Deposition, Microstructure and Properties for Thermally Sprayed Conventional and Nanostructured WC-Co, Int. J. Refract. Metals Hard Mater., 2013, 39, p 2-17. https://doi.org/10.1016/j.ijrmhm.2012.03.01410.1016/j.ijrmhm.2012.03.014 ↗
18. L.-M. Berger, Application of Hardmetals as Thermal Spray Coatings, Int. J. Refract. Metals Hard Mater., 2015, 49, p 350-364. https://doi.org/10.1016/j.ijrmhm.2014.09.02910.1016/j.ijrmhm.2014.09.029 ↗
19. G. Matthäus and V. Verlotzki, Ultrafine Powders for Low-Power HVOF and HV-APS Spraying, Proc. Int’l Thermal Spray Conf. (ITSC), Düsseldorf, Germany, 446-450 (2018)10.31399/asm.cp.itsc2017p0446 ↗
20. P. Fauchais and G. Montavon, Latest Developments in Suspension and Liquid Precursor Thermal Spraying, J. Therm. Spray Technol., 2010, 19(1-2), p 226-239. https://doi.org/10.1007/s11666-009-9446-710.1007/s11666-009-9446-7 ↗
21. F.-L. Toma, A. Potthoff, L.-M. Berger, and C. Leyens, Demands, Potentials, and Economic Aspects of Thermal Spraying with Suspensions: a Critical Review, J. Therm. Spray Technol., 2015, 24(7), p 1143-1152. https://doi.org/10.1007/s11666-015-0274-710.1007/s11666-015-0274-7 ↗
22. L.-M. Berger, J. Spatzier, C. Hochmuth, and R. Georgi, Milling of Thermally Sprayed Hardmetal Coatings, Therm. Spray Bull., 2012, 5(1), p 33-37.
23. J. Oberste Berghaus, B. Marple, and C. Moreau, Suspension Plasma Spraying of Nanostructured WC-12Co Coatings, J. Therm. Spray Technol., 2006, 15(4), p 676-681. https://doi.org/10.1361/105996306X14707210.1361/105996306X147072 ↗
24. R. Ahmed, O. Ali, N.H. Faisal, N.M. Al-Anazi, S. Al-Mutairi, F.-L. Toma, L.-M. Berger, A. Potthoff, and M.F.A. Goosen, Sliding Wear Investigation of Suspension Sprayed WC-Co Nanocomposite Coatings, Wear, 2015, 322-323, p 133-150. https://doi.org/10.1016/j.wear.2014.10.02110.1016/j.wear.2014.10.021 ↗
25. R. Ahmed, N.H. Faisal, N.M. Al-Anazi, S. Al-Mutairi, F.-L. Toma, L.-M. Berger, A. Potthoff, E.K. Polychroniadis, M. Sall, D. Chaliampalias, and M.F.A. Goosen, Structure Property Relationship of Suspension Thermally Sprayed WC-Co Nanocomposite Coatings, J. Therm. Spray Technol., 2015, 24(3), p 357-377. https://doi.org/10.1007/s11666-014-0174-210.1007/s11666-014-0174-2 ↗
26. GHS Material Safety Data Sheet, Alfa Aesar (A Thermo Fisher Scientific Brand)
27. F.-L. Toma, O. Kunze, A. Meyer, A. Potthoff, M. Mayer, J. Pötschke: Potential of Suspension Spraying for Development of Dense WC-12Co Coatings. Thermal Spray 2021: Proc Int’l Thermal Spray Conf., May 24-28, 2021, virtual, ASM International, 508-514 (2021)10.31399/asm.cp.itsc2021p0508 ↗
28. F.-L. Toma, A. Potthoff, and M. Barbosa, Microstructural Characteristics and Performances of Cr2O3 and Cr2O3-15%TiO2 S-HVOF Coatings Obtained from Water-Based Suspensions, J. Therm. Spray Technol., 2018, 27(3), p 344-357. https://doi.org/10.1007/s11666-018-0687-110.1007/s11666-018-0687-1 ↗
29. H.L. de VilliersLovelock, Powder/Processing/Structure Relationships in WC-Co Thermal Spray Coatings: A Review of the Published Literature, J. Therm. Spray Technol., 1998, 7(3), p 357-373. https://doi.org/10.1361/10599639877035084610.1361/105996398770350846 ↗
30. S. Matthews, J. Ansbro, C.C. Berndt, and A.S.M. Ang, Carbide Dissolution in WC-17Co Thermal Spray Coatings: Part 1-Project Concept and as-Sprayed Coatings, J. Alloys Compd., 2020 https://doi.org/10.1016/j.jallcom.2020.15746410.1016/j.jallcom.2020.157464 ↗
31. O. Ali, R. Ahmed, N.H. Faisal, N.M. Alanazi, L.M. Berger, A. Kaiser, F.L. Toma, E.K. Polychroniadis, M. Sall, Y.O. Elakwah, and M.F.A. Goosen, Influence of Post-Treatment on the Microstructural and Tribomechanical Properties of Suspension Thermally Sprayed WC-12 Wt%Co Nanocomposite Coatings, Tribol. Lett., 2017, 65(2), p 33. https://doi.org/10.1007/s11249-017-0815-y10.1007/s11249-017-0815-y ↗
32. R. Ahmed, O. Ali, C.C. Berndt, and A. Fardan, Sliding Wear of Conventional and Suspension Sprayed Nanocomposite WC-Co Coatings: An Invited Review, J. Therm. Spray Technol., 2021, 30, p 800-861. https://doi.org/10.1007/s11666-021-01185-z10.1007/s11666-021-01185-z ↗
33. R.J.K. Wood, S. Herd, and M.R. Thakare, A Critical Review of the Tribocorrosion of Cemented and Thermal Sprayed Tungsten Carbide, Tribol. Int., 2018, 119, p 491-509. https://doi.org/10.1016/j.triboint.2017.10.00610.1016/j.triboint.2017.10.006 ↗
34. D.A. Stewart, P.H. Shipway, and G. McCartney, Abrasive Wear Behaviour of Conventional and Nanocomposite HVOF Sprayed WC-Co Coatings, Wear Part, 1999, 2, p 789-798. https://doi.org/10.1016/S0043-1648(99)00032-010.1016/S0043-1648(99)00032-0 ↗
35. S. Usmani, S. Sampath, D.L. Houck, and D. Lee, Effect of Carbide Grain Size on the Sliding and Abrasive Wear Behavior of Thermally Sprayed WC-Co Coatings, Tribol. Trans., 1997, 40(3), p 470-478. https://doi.org/10.1080/1040200970898368210.1080/10402009708983682 ↗
36. W. Tillmann, I. Baumann, P.S. Hollingsworth, and L. Hagen, Sliding and Rolling Wear Behavior of HVOF-Sprayed Coatings Derived from Conventional, Fine and Nanostructured WC-12Co Powders, J. Therm. Spray Technol., 2014, 23(1-2), p 262-280. https://doi.org/10.1007/s11666-013-0038-110.1007/s11666-013-0038-1 ↗
37. J.M. Guilemany, J.M. Miguel, S. Vizcaino, and F. Climent, Role of Three-Body Abrasion Wear in the Sliding Wear Behaviour of WC-Co Coatings Obtained by Thermal Spraying, Surf. Coat. Technol., 2001, 140(2), p 141-146. https://doi.org/10.1016/S0257-8972(01)01033-710.1016/S0257-8972(01)01033-7 ↗
38. W.M. Rainforth, The Wear Behaviour of Oxide Ceramics—A Review, J. Mater. Sci., 2004, 32(22), p 6705-6721. https://doi.org/10.1023/B:JMSC.0000045601.49480.7910.1023/B:JMSC.0000045601.49480.79 ↗
39. G. Bolelli, L. Lusvarghi, T. Manfredini, F. Mantini Pighetti, R. Polini, E. Turunen, and S.-P. Hannula, Comparison between Plasma- and HVOF-Sprayed Ceramic Coatings. Part II: Tribological Behavior, Intern. J. Surf. Sci. Eng., 2007, 1, p 62-79. https://doi.org/10.1504/IJSURFSE.2007.01362110.1504/IJSURFSE.2007.013621 ↗
40. L.-M. Berger, S. Saaro, and M. Woydt, Reib/Gleitverschleiß Von Thermisch Gespritzten Hartmetallschichten (Friction/Sliding Wear of Thermally Sprayed Carbides Coatings), in Jahrbuch Oberflächentechnik, Ed. by R. Suchentrunk, Bad Saulgau. Eug. G. Leuze Verlag, 2007, 63, p 242-267.
41. J. Yuan, C. Ma, S. Yang, Z. Yu, and H. Li, Improving the Wear Resistance of HVOF Sprayed WC-Co Coatings by Adding Submicron-Sized WC Particles at the Splats’ Interfaces, Surf. Coat. Technol., 2016, 285, p 17-23. https://doi.org/10.1016/j.surfcoat.2015.11.01710.1016/j.surfcoat.2015.11.017 ↗