journal article·2023-04Open access

Antiviral and Antibacterial Cold Spray Coating Application on Rubber Substrate, Disruption in Disease Transmission Chain

D. C. Saha, S. J. Boegel, S. Tanvir, C. L. Nogueira, M. G. Aucoin, W. A. Anderson, H. Jahed

Abstract

The objective of this study was to prepare a copper-coated rubber surface using cold spray technology with improved virucidal and antimicrobial properties to fight against highly transmissible viruses and bacteria. A successful cold spray coating was produced using irregular-shaped pure Cu powder on an escalator handrail rubber. The powder particles and the deposited coatings (single and double pass) were characterized in terms of particle morphology and size distribution, coating surface and coat/substrate cross-section properties. The bonding between powder and rubber surfaces was purely mechanical interlocking. The Cu powder penetration depth within the rubber surface increases with a number of depositions pass. The virucidal properties of the coated surface were tested utilizing surrogates for SARS-CoV-2: HCoV-229E, a seasonal human coronavirus, and baculovirus, a high-titer enveloped insect cell virus. A double-pass coated surface showed significant baculovirus inactivation relative to a bare rubber control surface after 2-h (approximately 1.7-log) and 4-h (approximately 6.2-log), while a 4-h exposure reduced HCoV-229E titer to below the limit of detection. A similar microbial test was performed using E. coli, showing a 4-log microbial reduction after 2-h exposure relative to the bare rubber. These promising results open a new application for cold spray in the health sector. Supplementary information The online version contains supplementary material available at 10.1007/s11666-023-01553-x.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Antimicrobial agents and applications · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. S.A. Wilks, H.T. Michels and C.W. Keevil, Survival of Listeria Monocytogenes Scott A on Metal Surfaces: Implications for Cross-Contamination, Int. J. Food Microbiol., 2006, 111(2), p 93-98.10.1016/j.ijfoodmicro.2006.04.037 ↗
2. S.L. Warnes, Z.R. Little and C.W. Keevil, Human Coronavirus 229E Remains Infectious on Common Touch Surface Materials, MBio, 2015, 6(6), p e01697-15.10.1128/mBio.01697-15 ↗
3. N. van Doremalen, T. Bushmaker, D.H. Morris, M.G. Holbrook, A. Gamble, B.N. Williamson, A. Tamin, J.L. Harcourt, N.J. Thornburg, S.I. Gerber, J.O. Lloyd-Smith, E. de Wit and V.J. Munster, Aerosol and Surface Stability of SARS-CoV-2 as Compared with SARS-CoV-1, N. Engl. J. Med., 2020, 382(16), p 1564-1567.10.1056/NEJMc2004973 ↗
4. G. Grass, C. Rensing and M. Solioz, Metallic Copper as an Antimicrobial Surface, Appl. Environ. Microbiol., 2011, 77(5), p 1541-1547.10.1128/AEM.02766-10 ↗
5. K. Sundberg, Application of Materials Characterization, Efficacy Testing, and Modeling Methods on Copper Cold Spray Coatings for Optimized Antimicrobial Properties, Worcester Polytechnic Institute, (2019), https://digital.wpi.edu/show/3n204157n
6. A.L. Casey, D. Adams, T.J. Karpanen, P.A. Lambert, B.D. Cookson, P. Nightingale, L. Miruszenko, R. Shillam, P. Christian and T.S.J. Elliott, Role of Copper in Reducing Hospital Environment Contamination, J. Hosp. Infect., 2010, 74(1), p 72-77.10.1016/j.jhin.2009.08.018 ↗
7. H.T. Michels, J.O. Noyce and C.W. Keevil, Effects of Temperature and Humidity on the Efficacy of Methicillin-Resistant Staphylococcus Aureus Challenged Antimicrobial Materials Containing Silver and Copper, Lett. Appl. Microbiol., 2009, 49(2), p 191.10.1111/j.1472-765X.2009.02637.x ↗
8. A. Mikolay, S. Huggett, L. Tikana, G. Grass, J. Braun and D.H. Nies, Survival of Bacteria on Metallic Copper Surfaces in a Hospital Trial, Appl. Microbiol. Biotechnol., 2010, 87(5), p 1875-1879.10.1007/s00253-010-2640-1 ↗
9. J. Mostaghimi, L. Pershin, H. Salimijazi, M. Nejad and M. Ringuette, Thermal Spray Copper Alloy Coatings as Potent Biocidal and Virucidal Surfaces, J. Therm. Spray Technol., 2021, 30(1-2), p 25-39.10.1007/s11666-021-01161-7 ↗
10. V. Champagne and D. Helfritch, Critical Assessment 11: Structural Repairs by Cold Spray, Mater. Sci. Technol., 2015, 31(6), p 627-634.10.1179/1743284714Y.0000000723 ↗
11. S. Yin, P. Cavaliere, B. Aldwell, R. Jenkins, H. Liao, W. Li and R. Lupoi, Cold Spray Additive Manufacturing and Repair: Fundamentals and Applications, Addit. Manuf., 2018, 21(April), p 628-650.
12. H. Assadi, F. Gärtner, T. Stoltenhoff and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51(15), p 4379-4394.10.1016/S1359-6454(03)00274-X ↗
13. M. Grujicic, C.L.L. Zhao, W.S.S. DeRosset and D. Helfritch, Adiabatic Shear Instability Based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process, Mater. Des., 2004, 25(8), p 681-688.10.1016/j.matdes.2004.03.008 ↗
14. V.K. Champagne, The Repair of Magnesium Rotorcraft Components by Cold Spray, J. Fail. Anal. Prev., 2008, 8(2), p 164-175.10.1007/s11668-008-9116-y ↗
15. D. MacDonald, R. Fernández, F. Delloro and B. Jodoin, Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing, J. Therm. Spray Technol., 2017, 26(4), p 598-609.10.1007/s11666-016-0489-2 ↗
16. A. Sova, S. Grigoriev, A. Okunkova and I. Smurov, Potential of Cold Gas Dynamic Spray as Additive Manufacturing Technology, Int. J. Adv. Manuf. Technol., 2013, 69(9-12), p 2269-2278.10.1007/s00170-013-5166-8 ↗
17. S. Pathak and G. Saha, Development of Sustainable Cold Spray Coatings and 3D Additive Manufacturing Components for Repair/Manufacturing Applications: A Critical Review, Coatings, 2017, 7(8), p 122.10.3390/coatings7080122 ↗
18. M. Hassani-Gangaraj, D. Veysset, K.A. Nelson and C.A. Schuh, Supersonic Impact of Metallic Micro-Particles, arXiv Mater. Sci., 2016, 1612, p 08081.
19. A. Sturgeon, B. Dunn, S. Celotto and B. ONeill, Cold Sprayed Coatings for Polymer Composite Substrates, Eur. Sp. Agency (Special Publ. ESA SP 2006), 2006, 616, p 1-5.
20. C. Chen, X. Xie, Y. Xie, X. Yan, C. Huang, S. Deng, Z. Ren and H. Liao, Metallization of Polyether Ether Ketone (PEEK) by Copper Coating via Cold Spray, Surf. Coatings Technol., 2018, 342, p 209-219.10.1016/j.surfcoat.2018.02.087 ↗
21. H. Che, P. Vo and S. Yue, Investigation of Cold Spray on Polymers by Single Particle Impact Experiments, J. Therm. Spray Technol., 2019, 28(1-2), p 135-143.10.1007/s11666-018-0801-4 ↗
22. N. Hutasoit, B. Kennedy, S. Hamilton, A. Luttick, R.A. Rahman Rashid and S. Palanisamy, Sars-CoV-2 (COVID-19) Inactivation Capability of Copper-Coated Touch Surface Fabricated by Cold-Spray Technology, Manuf. Lett., 2020, 25, p 93-97.10.1016/j.mfglet.2020.08.007 ↗
23. O. Mishchenko, V. Filatova, M. Vasylyev, V. Deineka and M. Pogorielov, Chemical and Structural Characterization of Sandlasted Surface of Dental Implant Using ZrO2 Particle with Different Shape, Coatings, 2019, 9(4), p 223.10.3390/coatings9040223 ↗
24. M. Hans, A. Erbe, S. Mathews, Y. Chen, M. Solioz and F. Mücklich, Role of Copper Oxides in Contact Killing of Bacteria, Langmuir, 2013, 29(52), p 16160-16166.10.1021/la404091z ↗
25. K.L. Sundberg, B.C. Sousa, C. Walde, S. Mohanty, J.-H. Lee, V.K. Champagne, D.L. Cote, Microstructural Characterization of Conventional and Nanostructured Copper Cold Gas-Dynamic Spray Material Consolidations, J. Biotechnol. Biomater. (2020)
26. S. Mathews, M. Hans, F. Mücklich and M. Solioz, Contact Killing of Bacteria on Copper Is Suppressed If Bacterial-Metal Contact Is Prevented and Is Induced on Iron by Copper Ions, Appl. Environ. Microbiol., 2013, 79(8), p 2605.10.1128/AEM.03608-12 ↗
27. K. Sundberg, M. Gleason, B. Haddad, V.K. Champagne, C. Brown, R.D. Sisson and D. Cote, The Effect of Nano-Scale Surface Roughness on Copper Cold Spray Inactivation of Influenza A Virus, Int. J. Nanotechnol. Med. Eng, 2019, 4, p 33.
28. K. Sundberg, C. Walde, B. Sousa, S. Mohanty, J.-H. Lee, V. Champagne Jr. and D. Cote, Microstructural Characterization of Conventional and Nanomaterial Copper Cold Spray Coatings, J. Biotechnol. Biomater., 2020, 10(4), p 1-7.
29. K. Sundberg, The Effect of Corrosion on Conventional and Nanomaterial Copper Cold Spray Surfaces for Antimicrobial Applications, Biomed. J. Sci. Tech. Res., 2019, 22(3), p 16753.
30. Y. Chen, Q. Liu and D. Guo, Emerging Coronaviruses: Genome Structure, Replication, and Pathogenesis, J. Med. Virol., 2020, 92(4), p 418-423.10.1002/jmv.25681 ↗
31. Y.A. Malik, Properties of Coronavirus and SARS-CoV-2, Malays. J. Pathol., 2020, 42(1), p 3-11.
32. S.J. Boegel, M. Gabriel, M. Sasges, B. Petri, M.R. D’Agostino, A. Zhang, J.C. Ang, M.S. Miller, S.M. Meunier and M.G. Aucoin, Robust Evaluation of Ultraviolet-C Sensitivity for SARS-CoV-2 and Surrogate Coronaviruses, Microbiol. Spectr., 2021, 9(2), p e00537-21.10.1128/Spectrum.00537-21 ↗
33. C. Lourenco Nogueira, S.J. Boegel, M. Shukla, W. Ngo, L. Jones and M.G. Aucoin, Antiviral Activity of Contemporary Contact Lens Care Solutions against Two Human Seasonal Coronavirus Strains, Pathogens, 2022, 11(4), p 472.10.3390/pathogens11040472 ↗
34. S. Butot, L. Baert and A.S. Zubera, Assessment of Antiviral Coatings for High-Touch Surfaces by Using Human Coronaviruses HCoV-229E and SARS-CoV-2, Appl. Environ. Microbiol., 2021, 87(19), p 1-8.10.1128/AEM.01098-21 ↗
35. C.L. Nogueira, S.J. Boegel, M. Shukla, W. Ngo, L. Jones and M.G. Aucoin, The Impact of a Rub and Rinse Regimen on Removal of Human Coronaviruses from Contemporary Contact Lens Materials, Contact Lens Anterior Eye, 2022, 45(6), p 101719.10.1016/j.clae.2022.101719 ↗
36. R. Blodgett, FDA’s Bacteriological Analytical Manual, Appendix 2: Most Probable Number from Serial Dilutions, 2010, https://www.fda.gov/food/laboratory-methods-food/bam-appendix-2-most-probable-number-serial-dilutions. Accessed 2 September (2022)
37. S. Cohen, US Environmental Protection Agency, Office of Pesticide Programs, Environ. Prot. Agency, Off. (July), 5-13 (1984) http://www.epa.gov/opp00001/methods/atmpmethods/QC-23-01.pdf
38. W.B. James, Powder Metallurgy Methods and Applications, Powder Metallurgy, P. Samal, J. Newkirk, Eds., ASM International, 9-19. (2015)10.31399/asm.hb.v07.a0006022 ↗
39. V.K. Champagne, D.J. Helfritch and M.D. Trexler, Some Material Characteristics of Cold-Sprayed Structures, Res. Lett. Mater. Sci., 2007, 2007, p 1-3.10.1155/2007/27347 ↗
40. R.F. Bryan, Worked Examples in the Geometry of Crystals. (Second Edition). By H. K. D. H. Bhadeshia. London: Institute of Materials, 2001. ISBN 0-904357-94-5. Acta Crystallogr. Sect. A Found. Crystallogr. 57(4), p 478-478. (2001)10.1107/S0108767301006882 ↗
41. S.D. Walji, M.R. Bruder and M.G. Aucoin, Virus Matrix Interference on Assessment of Virucidal Activity of High-Touch Surfaces Designed to Prevent Hospital-Acquired Infections, Antimicrob. Resist. Infect. Control, 2021, 10(1), p 1-12.10.1186/s13756-021-01001-x ↗
42. N. Hutasoit, S.H. Topa, M.A. Javed, R.A. Rahman Rashid, E. Palombo and S. Palanisamy, Antibacterial Efficacy of Cold-Sprayed Copper Coatings against Gram-Positive Staphylococcus Aureus and Gram-Negative Escherichia Coli, Materials (Basel, Switzerland), 2021, 14(22), p 6744.10.3390/ma14226744 ↗
43. I. Salah, I.P. Parkin and E. Allan, Copper as an Antimicrobial Agent: Recent Advances, RSC Adv., 2021, 11(30), p 18179-18186.10.1039/D1RA02149D ↗
44. M. Vincent, R.E. Duval, P. Hartemann and M. Engels-Deutsch, Contact Killing and Antimicrobial Properties of Copper, J. Appl. Microbiol., 2018, 124(5), p 1032-1046.10.1111/jam.13681 ↗
45. H. Che, X. Chu, P. Vo and S. Yue, Metallization of Various Polymers by Cold Spray, J. Therm. Spray Technol., 2018, 27(1-2), p 169-178.10.1007/s11666-017-0663-1 ↗
46. R. Shafaghi, J. Mostaghimi, V. Pershin and M. Ringuette, Sporicidal Efficacy of Thermal-Sprayed Copper Alloy Coating, Can. J. Microbiol., 2017, 63(5), p 384-391.10.1139/cjm-2016-0638 ↗